From patchwork Mon Nov 12 11:22:01 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Subject: [4/4] ARM i.MX: Add Ka-Ro TX25 devicetree Date: Mon, 12 Nov 2012 01:22:01 -0000 From: Sascha Hauer X-Patchwork-Id: 198367 Message-Id: <1352719321-23541-5-git-send-email-s.hauer@pengutronix.de> To: Cc: Sascha Hauer , Shawn Guo , =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Basic support for the Ka-Ro i.MX25 based TX25 board. Signed-off-by: Sascha Hauer Cc: Lothar Waßmann --- arch/arm/boot/dts/imx25-karo-tx25.dts | 44 +++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 arch/arm/boot/dts/imx25-karo-tx25.dts diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts new file mode 100644 index 0000000..d81f8a0 --- /dev/null +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx25.dtsi" + +/ { + model = "Ka-Ro TX25"; + compatible = "karo,imx25-tx25", "fsl,imx25"; + + memory { + reg = <0x80000000 0x02000000 0x90000000 0x02000000>; + }; + + soc { + aips@43f00000 { + uart1: serial@43f90000 { + status = "okay"; + }; + }; + + spba@50000000 { + fec: ethernet@50038000 { + status = "okay"; + phy-mode = "rmii"; + }; + }; + + emi@80000000 { + nand@bb000000 { + nand-on-flash-bbt; + status = "okay"; + }; + }; + }; +};