Comments
Patch
@@ -160,7 +160,7 @@ static uint8_t nand_read_byte(struct mtd_info *mtd)
}
/**
- * nand_read_byte16 - [DEFAULT] read one byte endianess aware from the chip
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
* nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
* @mtd: MTD device structure
*
@@ -366,8 +366,8 @@ static int __init mtd_oobtest_init(void)
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
- pr_info("Please specify a valid mtd-device via module paramter\n");
- pr_crit(KERN_CRIT "CAREFUL: This test wipes all data on the specified MTD device!\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
+ pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
@@ -499,7 +499,7 @@ static int __init mtd_pagetest_init(void)
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
- pr_info("Please specify a valid mtd-device via module paramter\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
@@ -171,7 +171,7 @@ static int __init mtd_readtest_init(void)
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
- pr_info("Please specify a valid mtd-device via module paramter\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
return -EINVAL;
}
@@ -351,7 +351,7 @@ static int __init mtd_speedtest_init(void)
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
- pr_info("Please specify a valid mtd-device via module paramter\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
@@ -231,7 +231,7 @@ static int __init mtd_stresstest_init(void)
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
- pr_info("Please specify a valid mtd-device via module paramter\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
@@ -377,7 +377,7 @@ static int __init mtd_subpagetest_init(void)
printk(KERN_INFO "=================================================\n");
if (dev < 0) {
- pr_info("Please specify a valid mtd-device via module paramter\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
@@ -216,7 +216,7 @@ static int __init tort_init(void)
"flash, stop it if this is not wanted.\n");
if (dev < 0) {
- pr_info("Please specify a valid mtd-device via module paramter\n");
+ pr_info("Please specify a valid mtd-device via module parameter\n");
pr_crit("CAREFUL: This test wipes all data on the specified MTD device!\n");
return -EINVAL;
}
Correct spelling typo in printk within drivers/mtd/tests. Signed-off-by: Masanari Iida <standby24x7@gmail.com> --- drivers/mtd/nand/nand_base.c | 2 +- drivers/mtd/tests/mtd_oobtest.c | 4 ++-- drivers/mtd/tests/mtd_pagetest.c | 2 +- drivers/mtd/tests/mtd_readtest.c | 2 +- drivers/mtd/tests/mtd_speedtest.c | 2 +- drivers/mtd/tests/mtd_stresstest.c | 2 +- drivers/mtd/tests/mtd_subpagetest.c | 2 +- drivers/mtd/tests/mtd_torturetest.c | 2 +- 8 files changed, 9 insertions(+), 9 deletions(-)