| Submitter | Huang Shijie |
|---|---|
| Date | Nov. 9, 2012, 8:23 a.m. |
| Message ID | <1352449425-16496-1-git-send-email-b32955@freescale.com> |
| Download | mbox | patch |
| Permalink | /patch/197993/ |
| State | New |
| Headers | show |
Comments
On Fri, 2012-11-09 at 16:23 +0800, Huang Shijie wrote: > When we scan several nand chips with nand_scan(), such as > ....................... > nand_scan(*, 2); > ....................... > > In nand_scan_ident(), the maxchips will become 2, so the current code > will select chip 1 to read the device ID. But the chip 0 is still > selected in this case. > > To make the logic clear, we'd better de-select the chip when it is not used. > > This patch de-select the nand chip if it is not used any more. > > Signed-off-by: Huang Shijie <b32955@freescale.com> Pushed to l2-mtd.git, thanks!
Patch
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index ec6841d..fd5fa3b 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -3325,6 +3325,8 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, return PTR_ERR(type); } + chip->select_chip(mtd, -1); + /* Check for a chip array */ for (i = 1; i < maxchips; i++) { chip->select_chip(mtd, i); @@ -3334,8 +3336,11 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); /* Read manufacturer and device IDs */ if (nand_maf_id != chip->read_byte(mtd) || - nand_dev_id != chip->read_byte(mtd)) + nand_dev_id != chip->read_byte(mtd)) { + chip->select_chip(mtd, -1); break; + } + chip->select_chip(mtd, -1); } if (i > 1) pr_info("%d NAND chips detected\n", i); @@ -3594,9 +3599,6 @@ int nand_scan_tail(struct mtd_info *mtd) /* Initialize state */ chip->state = FL_READY; - /* De-select the device */ - chip->select_chip(mtd, -1); - /* Invalidate the pagebuffer reference */ chip->pagebuf = -1;
When we scan several nand chips with nand_scan(), such as ....................... nand_scan(*, 2); ....................... In nand_scan_ident(), the maxchips will become 2, so the current code will select chip 1 to read the device ID. But the chip 0 is still selected in this case. To make the logic clear, we'd better de-select the chip when it is not used. This patch de-select the nand chip if it is not used any more. Signed-off-by: Huang Shijie <b32955@freescale.com> --- drivers/mtd/nand/nand_base.c | 10 ++++++---- 1 files changed, 6 insertions(+), 4 deletions(-)