Patchwork new perl build issue

login
register
mail settings
Submitter Francois Perrad
Date Nov. 5, 2012, 2:33 p.m.
Message ID <CAB0FRssio4MnFavizgHUnLa-_tJAZAUNcb4hxKb=RjQKoXnfQg@mail.gmail.com>
Download mbox | patch
Permalink /patch/197205/
State Not Applicable
Headers show

Comments

Francois Perrad - Nov. 5, 2012, 2:33 p.m.
2012/11/5 Alexander Khryukin <alexander@mezon.ru>:
>
>
> 2012/11/5 Alexander Khryukin <alexander@mezon.ru>
>>
>>
>>
>> 2012/11/5 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>>>
>>>
>>> On Sun, 4 Nov 2012 20:41:45 +0100, François Perrad wrote:
>>>
>>> > this afternoon, Thomas has posted 3 patches for qemu (see
>>> > http://patchwork.ozlabs.org/patch/197055/).
>>> > Alexander, try to rebuild host-qemu with them.
>>>
>>> Unfortunately, none of those patches have a chance to fix Alexander's
>>> problem. My patches only fix missing dependencies.
>>>
>>> Also, could you have a look at http://autobuild.buildroot.org/ for perl
>>> build failures? It seems like Qemu doesn't start properly on some
>>> platforms, for some reason.
>>>
>>> Thomas
>>> --
>>> Thomas Petazzoni, Free Electrons
>>> Kernel, drivers, real-time and embedded Linux
>>> development, consulting, training and support.
>>> http://free-electrons.com
>>
>>
>>
>> I applied your patch but looks it not helps me.
>>
>> http://pastie.org/5188031
>
>
>
> Also if i compile it by my default system gcc it's ok
>
>
> [fdkit@kvm-host UU]$ gcc try.c
> [fdkit@kvm-host UU]$ ls ./a.out
> ./a.out*
> [fdkit@kvm-host UU]$ ./a.out
> Ok
>

Alexander,

the 'qemu-arm' built by Buildroot doesn't work properly.
could you try this workaround ?
1) install a 'qemu-arm' with your distro package manager,
     $ apt-get install qemu-kvm-extras # or equivalent
2) apply this patch :

François
Alexander Khryukin - Nov. 6, 2012, 8:51 p.m.
2012/11/5 François Perrad <francois.perrad@gadz.org>

> 2012/11/5 Alexander Khryukin <alexander@mezon.ru>:
> >
> >
> > 2012/11/5 Alexander Khryukin <alexander@mezon.ru>
> >>
> >>
> >>
> >> 2012/11/5 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> >>>
> >>>
> >>> On Sun, 4 Nov 2012 20:41:45 +0100, François Perrad wrote:
> >>>
> >>> > this afternoon, Thomas has posted 3 patches for qemu (see
> >>> > http://patchwork.ozlabs.org/patch/197055/).
> >>> > Alexander, try to rebuild host-qemu with them.
> >>>
> >>> Unfortunately, none of those patches have a chance to fix Alexander's
> >>> problem. My patches only fix missing dependencies.
> >>>
> >>> Also, could you have a look at http://autobuild.buildroot.org/ for
> perl
> >>> build failures? It seems like Qemu doesn't start properly on some
> >>> platforms, for some reason.
> >>>
> >>> Thomas
> >>> --
> >>> Thomas Petazzoni, Free Electrons
> >>> Kernel, drivers, real-time and embedded Linux
> >>> development, consulting, training and support.
> >>> http://free-electrons.com
> >>
> >>
> >>
> >> I applied your patch but looks it not helps me.
> >>
> >> http://pastie.org/5188031
> >
> >
> >
> > Also if i compile it by my default system gcc it's ok
> >
> >
> > [fdkit@kvm-host UU]$ gcc try.c
> > [fdkit@kvm-host UU]$ ls ./a.out
> > ./a.out*
> > [fdkit@kvm-host UU]$ ./a.out
> > Ok
> >
>
> Alexander,
>
> the 'qemu-arm' built by Buildroot doesn't work properly.
> could you try this workaround ?
> 1) install a 'qemu-arm' with your distro package manager,
>      $ apt-get install qemu-kvm-extras # or equivalent
> 2) apply this patch :
> --- a/package/perl/perl.mk
> +++ b/package/perl/perl.mk
> @@ -22,7 +22,7 @@ endif
>
>  PERL_CONF_OPT = -des \
>                 -Dusecrosscompile \
> -               -Dtargetrun=$(QEMU_USER) \
> +               -Dtargetrun=qemu-arm \
>                 -Dqemulib=$(STAGING_DIR) \
>                 -Dar="$(TARGET_AR)" \
>                 -Dcc="$(TARGET_CC)" \
>
> François
>


I migrated my build system to fresh linux installation with 3.5.1 kernel
 Linux localhost.localdomain 3.5.1-nrj-desktop-1mib #1 SMP PREEMPT Tue Aug
14 11:57:05 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

Applied your patch, and problem still here.

http://pastie.org/5336882
Alexander Khryukin - Nov. 7, 2012, 9:53 a.m.
2012/11/7 Alexander Khryukin <alexander@mezon.ru>

>
>
> 2012/11/5 François Perrad <francois.perrad@gadz.org>
>
>> 2012/11/5 Alexander Khryukin <alexander@mezon.ru>:
>> >
>> >
>> > 2012/11/5 Alexander Khryukin <alexander@mezon.ru>
>> >>
>> >>
>> >>
>> >> 2012/11/5 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>> >>>
>> >>>
>> >>> On Sun, 4 Nov 2012 20:41:45 +0100, François Perrad wrote:
>> >>>
>> >>> > this afternoon, Thomas has posted 3 patches for qemu (see
>> >>> > http://patchwork.ozlabs.org/patch/197055/).
>> >>> > Alexander, try to rebuild host-qemu with them.
>> >>>
>> >>> Unfortunately, none of those patches have a chance to fix Alexander's
>> >>> problem. My patches only fix missing dependencies.
>> >>>
>> >>> Also, could you have a look at http://autobuild.buildroot.org/ for
>> perl
>> >>> build failures? It seems like Qemu doesn't start properly on some
>> >>> platforms, for some reason.
>> >>>
>> >>> Thomas
>> >>> --
>> >>> Thomas Petazzoni, Free Electrons
>> >>> Kernel, drivers, real-time and embedded Linux
>> >>> development, consulting, training and support.
>> >>> http://free-electrons.com
>> >>
>> >>
>> >>
>> >> I applied your patch but looks it not helps me.
>> >>
>> >> http://pastie.org/5188031
>> >
>> >
>> >
>> > Also if i compile it by my default system gcc it's ok
>> >
>> >
>> > [fdkit@kvm-host UU]$ gcc try.c
>> > [fdkit@kvm-host UU]$ ls ./a.out
>> > ./a.out*
>> > [fdkit@kvm-host UU]$ ./a.out
>> > Ok
>> >
>>
>> Alexander,
>>
>> the 'qemu-arm' built by Buildroot doesn't work properly.
>> could you try this workaround ?
>> 1) install a 'qemu-arm' with your distro package manager,
>>      $ apt-get install qemu-kvm-extras # or equivalent
>> 2) apply this patch :
>> --- a/package/perl/perl.mk
>> +++ b/package/perl/perl.mk
>> @@ -22,7 +22,7 @@ endif
>>
>>  PERL_CONF_OPT = -des \
>>                 -Dusecrosscompile \
>> -               -Dtargetrun=$(QEMU_USER) \
>> +               -Dtargetrun=qemu-arm \
>>                 -Dqemulib=$(STAGING_DIR) \
>>                 -Dar="$(TARGET_AR)" \
>>                 -Dcc="$(TARGET_CC)" \
>>
>> François
>>
>
>
> I migrated my build system to fresh linux installation with 3.5.1 kernel
>  Linux localhost.localdomain 3.5.1-nrj-desktop-1mib #1 SMP PREEMPT Tue Aug
> 14 11:57:05 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
>
> Applied your patch, and problem still here.
>
> http://pastie.org/5336882
>
>


Bump!
I don't know how to solve it.
Dan Pattison - Nov. 7, 2012, 8:35 p.m.
On 11/7/2012 1:53 AM, Alexander Khryukin wrote:
>
>
> 2012/11/7 Alexander Khryukin <alexander@mezon.ru 
> <mailto:alexander@mezon.ru>>
>
>
>
>     2012/11/5 François Perrad <francois.perrad@gadz.org
>     <mailto:francois.perrad@gadz.org>>
>
>         2012/11/5 Alexander Khryukin <alexander@mezon.ru
>         <mailto:alexander@mezon.ru>>:
>         >
>         >
>         > 2012/11/5 Alexander Khryukin <alexander@mezon.ru
>         <mailto:alexander@mezon.ru>>
>         >>
>         >>
>         >>
>         >> 2012/11/5 Thomas Petazzoni
>         <thomas.petazzoni@free-electrons.com
>         <mailto:thomas.petazzoni@free-electrons.com>>
>         >>>
>         >>>
>         >>> On Sun, 4 Nov 2012 20:41:45 +0100, François Perrad wrote:
>         >>>
>         >>> > this afternoon, Thomas has posted 3 patches for qemu (see
>         >>> > http://patchwork.ozlabs.org/patch/197055/).
>         >>> > Alexander, try to rebuild host-qemu with them.
>         >>>
>         >>> Unfortunately, none of those patches have a chance to fix
>         Alexander's
>         >>> problem. My patches only fix missing dependencies.
>         >>>
>         >>> Also, could you have a look at
>         http://autobuild.buildroot.org/ for perl
>         >>> build failures? It seems like Qemu doesn't start properly
>         on some
>         >>> platforms, for some reason.
>         >>>
>         >>> Thomas
>         >>> --
>         >>> Thomas Petazzoni, Free Electrons
>         >>> Kernel, drivers, real-time and embedded Linux
>         >>> development, consulting, training and support.
>         >>> http://free-electrons.com
>         >>
>         >>
>         >>
>         >> I applied your patch but looks it not helps me.
>         >>
>         >> http://pastie.org/5188031
>         >
>         >
>         >
>         > Also if i compile it by my default system gcc it's ok
>         >
>         >
>         > [fdkit@kvm-host UU]$ gcc try.c
>         > [fdkit@kvm-host UU]$ ls ./a.out
>         > ./a.out*
>         > [fdkit@kvm-host UU]$ ./a.out
>         > Ok
>         >
>
>         Alexander,
>
>         the 'qemu-arm' built by Buildroot doesn't work properly.
>         could you try this workaround ?
>         1) install a 'qemu-arm' with your distro package manager,
>              $ apt-get install qemu-kvm-extras # or equivalent
>         2) apply this patch :
>         --- a/package/perl/perl.mk <http://perl.mk>
>         +++ b/package/perl/perl.mk <http://perl.mk>
>         @@ -22,7 +22,7 @@ endif
>
>          PERL_CONF_OPT = -des \
>                         -Dusecrosscompile \
>         -               -Dtargetrun=$(QEMU_USER) \
>         +               -Dtargetrun=qemu-arm \
>                         -Dqemulib=$(STAGING_DIR) \
>                         -Dar="$(TARGET_AR)" \
>                         -Dcc="$(TARGET_CC)" \
>
>         François
>
>
>
>     I migrated my build system to fresh linux installation with 3.5.1
>     kernel
>      Linux localhost.localdomain 3.5.1-nrj-desktop-1mib #1 SMP PREEMPT
>     Tue Aug 14 11:57:05 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
>
>     Applied your patch, and problem still here.
>
>     http://pastie.org/5336882
>
>
>
>
> Bump!
> I don't know how to solve it.
>
>
> _______________________________________________
> buildroot mailing list
> buildroot@busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot

Hello,

Like Bernd mentioned below. Using perlcross makes a successful build of 
perl. I tried this in buildroot for target arm (AT91SAM9G20) with 
success. Was able to run Hello World program and perl -V with no 
problem. The perlcross patch only works for perl-5.16.0 right now. I was 
thinking on adjusting it for perl-5.16.2.

My .configure line is pasted below. I use old version of buildroot so 
you will need to edit the paths. I followed the instructions here:

http://perlcross.berlios.de/


./configure --target=arm-linux-uclibc \
--target-tools-prefix=/home/ethertek/rms200/buildroot/build_arm/staging_dir/usr/bin/arm-linux-uclibcgnueabi- 
\
     --prefix=/usr \
     --sysroot=/home/ethertek/rms200/buildroot/build_arm/staging_dir/

<Hi,

<maybe this can be of help:http://perlcross.berlios.de/

<Kind regards, Bernd

Dan Pattison
Ethertek Circuits

Patch

--- a/package/perl/perl.mk
+++ b/package/perl/perl.mk
@@ -22,7 +22,7 @@  endif

 PERL_CONF_OPT = -des \
                -Dusecrosscompile \
-               -Dtargetrun=$(QEMU_USER) \
+               -Dtargetrun=qemu-arm \
                -Dqemulib=$(STAGING_DIR) \
                -Dar="$(TARGET_AR)" \
                -Dcc="$(TARGET_CC)" \