Patchwork [U-Boot,03/17] Add a command to read raw blocks from a partition

login
register
mail settings
Submitter Simon Glass
Date Nov. 3, 2012, 12:27 a.m.
Message ID <1351902453-27956-4-git-send-email-sjg@chromium.org>
Download mbox | patch
Permalink /patch/196778/
State Superseded, archived
Delegated to: Tom Rini
Headers show

Comments

Simon Glass - Nov. 3, 2012, 12:27 a.m.
From: Kenneth Waters <kwaters@chromium.org>

Sometimes data is on a block device and within a partition, but not in a
particular filesystem.

This commands permits reading raw data from a partition.

Signed-off-by: Kenneth Waters <kwaters@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
---
 README                   |    1 +
 common/Makefile          |    1 +
 common/cmd_read.c        |   81 ++++++++++++++++++++++++++++++++++++++++++++++
 include/config_cmd_all.h |    1 +
 4 files changed, 84 insertions(+), 0 deletions(-)
 create mode 100644 common/cmd_read.c

Patch

diff --git a/README b/README
index a080225..05c5688 100644
--- a/README
+++ b/README
@@ -852,6 +852,7 @@  The following options need to be configured:
 		CONFIG_CMD_PING		* send ICMP ECHO_REQUEST to network
 					  host
 		CONFIG_CMD_PORTIO	* Port I/O
+		CONFIG_CMD_READ		* Read raw data from partition
 		CONFIG_CMD_REGINFO	* Register dump
 		CONFIG_CMD_RUN		  run command in env variable
 		CONFIG_CMD_SAVES	* save S record dump
diff --git a/common/Makefile b/common/Makefile
index 0fb79ed..84968f8 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -142,6 +142,7 @@  endif
 COBJS-y += cmd_pcmcia.o
 COBJS-$(CONFIG_CMD_PORTIO) += cmd_portio.o
 COBJS-$(CONFIG_CMD_PXE) += cmd_pxe.o
+COBJS-$(CONFIG_CMD_READ) += cmd_read.o
 COBJS-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o
 COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o
 COBJS-$(CONFIG_CMD_SATA) += cmd_sata.o
diff --git a/common/cmd_read.c b/common/cmd_read.c
new file mode 100644
index 0000000..f0fc9bf
--- /dev/null
+++ b/common/cmd_read.c
@@ -0,0 +1,81 @@ 
+/*
+ * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <part.h>
+
+int do_read(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	char *ep;
+	block_dev_desc_t *dev_desc = NULL;
+	int dev;
+	int part = 0;
+	disk_partition_t part_info;
+	ulong offset = 0u;
+	ulong limit = 0u;
+	void *addr;
+	uint blk;
+	uint cnt;
+
+	if (argc != 6) {
+		cmd_usage(cmdtp);
+		return 1;
+	}
+
+	dev = (int)simple_strtoul(argv[2], &ep, 16);
+	if (*ep) {
+		if (*ep != ':') {
+			printf("Invalid block device %s\n", argv[2]);
+			return 1;
+		}
+		part = (int)simple_strtoul(++ep, NULL, 16);
+	}
+
+	dev_desc = get_dev(argv[1], dev);
+	if (dev_desc == NULL) {
+		printf("Block device %s %d not supported\n", argv[1], dev);
+		return 1;
+	}
+
+	addr = (void *)simple_strtoul(argv[3], NULL, 16);
+	blk = simple_strtoul(argv[4], NULL, 16);
+	cnt = simple_strtoul(argv[5], NULL, 16);
+
+	if (part != 0) {
+		if (get_partition_info(dev_desc, part, &part_info)) {
+			printf("Cannot find partition %d\n", part);
+			return 1;
+		}
+		offset = part_info.start;
+		limit = part_info.size;
+	} else {
+		/* Largest address not available in block_dev_desc_t. */
+		limit = ~0;
+	}
+
+	if (cnt + blk > limit) {
+		printf("Read out of range\n");
+		return 1;
+	}
+
+	if (dev_desc->block_read(dev, offset + blk, cnt, addr) < 0) {
+		printf("Error reading blocks\n");
+		return 1;
+	}
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	read,	6,	0,	do_read,
+	"Load binary data from a partition",
+	"<interface> <dev[:part]> addr blk# cnt"
+);
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index b87967e..148d676 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -71,6 +71,7 @@ 
 #define CONFIG_CMD_REGINFO	/* Register dump		*/
 #define CONFIG_CMD_REISER	/* Reiserfs support		*/
 #define CONFIG_CMD_RARP		/* rarpboot support		*/
+#define CONFIG_CMD_READ		/* Read data from partition	*/
 #define CONFIG_CMD_RUN		/* run command in env variable	*/
 #define CONFIG_CMD_SAVEENV	/* saveenv			*/
 #define CONFIG_CMD_SAVES	/* save S record dump		*/