@@ -745,6 +745,7 @@ Vipin Kumar <vipin.kumar@st.com>
spear300 ARM926EJS (spear300 Soc)
spear310 ARM926EJS (spear310 Soc)
spear320 ARM926EJS (spear320 Soc)
+ spear320-hmi ARM926EJS (spear320 SoC)
spear600 ARM926EJS (spear600 Soc)
Sergey Lapin <slapin@ossfans.org>
@@ -38,6 +38,7 @@ endif
COBJS-$(CONFIG_MACH_SPEAR300EVB) += spear300evb.o
COBJS-$(CONFIG_MACH_SPEAR310EVB) += spear310evb.o
COBJS-$(CONFIG_MACH_SPEAR320EVB) += spear320plc.o
+COBJS-$(CONFIG_MACH_SPEAR320HMI) += spear320hmi.o
COBJS-$(CONFIG_MACH_SPEAR600EVB) += spear600evb.o
COBJS := $(sort $(COBJS-y))
new file mode 100644
@@ -0,0 +1,120 @@
+/*
+ * (C) Copyright 2012
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <nand.h>
+#include <asm/io.h>
+#include <linux/mtd/fsmc_nand.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/generic.h>
+#include <asm/arch/misc.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/pinmux.h>
+
+#if defined(CONFIG_CMD_NAND)
+static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
+#endif
+
+#if defined(CONFIG_BOARD_EARLY_INIT_F)
+int board_early_init_f(void)
+{
+ spear320_select_mode(SPEAR320_EXTENDED_MODE);
+
+ spear320_pins_default();
+
+ spear320_enable_pins(PMX_I2C0, 0);
+ spear320_enable_pins(PMX_SSP0, 0);
+ spear320_enable_pins(PMX_UART0, PMX_UART_SIMPLE);
+ spear320_enable_pins(PMX_FSMCNAND, PMX_NAND_8BIT);
+ spear320_enable_pins(PMX_ETH1_ETH2, PMX_ETH_RMII);
+ spear320_enable_pins(PMX_SDMMC, PMX_SDMMC_CD12);
+
+ /* GPIO50 is used for card power on */
+ spear320_configure_pin(50, PMX_GPIO);
+ spear320_plgpio_set(50, 0);
+
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_CMD_NAND)
+/*
+ * board_nand_init - Board specific NAND initialization
+ * @nand: mtd private chip structure
+ *
+ * Called by nand_init_chip to initialize the board specific functions
+ */
+void board_nand_init()
+{
+ struct misc_regs *const misc_regs_p =
+ (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+ struct nand_chip *nand = &nand_chip[0];
+
+ if (((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
+ MISC_SOCCFG30) ||
+ ((readl(&misc_regs_p->auto_cfg_reg) & MISC_SOCCFGMSK) ==
+ MISC_SOCCFG31)) {
+
+ fsmc_nand_init(nand);
+ }
+
+ return;
+}
+#endif
+
+#if defined(CONFIG_CMD_NET)
+int board_eth_init(bd_t *bis)
+{
+ int ret = 0;
+
+#if defined(CONFIG_DESIGNWARE_ETH)
+ u32 interface = PHY_INTERFACE_MODE_MII;
+ if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY,
+ interface) >= 0)
+ ret++;
+#endif
+#if defined(CONFIG_MACB)
+ if (macb_eth_initialize(0, (void *)CONFIG_SYS_MACB0_BASE,
+ CONFIG_MACB0_PHY) >= 0)
+ ret++;
+ if (macb_eth_initialize(1, (void *)CONFIG_SYS_MACB1_BASE,
+ CONFIG_MACB1_PHY) >= 0)
+ ret++;
+#endif
+ return ret;
+}
+#endif
+
+#if defined(CONFIG_CMD_MMC)
+int board_mmc_init(bd_t *bis)
+{
+ int ret = 0;
+#if defined(CONFIG_SPEAR_SDHCI)
+ if (spear_sdhci_init(CONFIG_SYS_MMC_BASE, 24000000, 6000000, 0) >= 0)
+ ret++;
+#endif
+ return ret;
+}
+#endif
@@ -47,6 +47,8 @@ int checkboard(void)
printf("BOARD: SPEAr310-EVB\n");
#elif defined(CONFIG_MACH_SPEAR320EVB)
printf("BOARD: SPEAr320-PLC\n");
+#elif defined(CONFIG_MACH_SPEAR320HMI)
+ printf("BOARD: SPEAr320-HMI\n");
#elif defined(CONFIG_MACH_SPEAR600EVB)
printf("BOARD: SPEAr600-EVB\n");
#else
@@ -210,6 +210,8 @@ spear320 arm arm926ejs spear st
spear320_pnor arm arm926ejs spear st spear spear320-evb:spear320,pnor
spear320_nand arm arm926ejs spear st spear spear320-evb:spear320,nand
spear320_usbtty arm arm926ejs spear st spear spear320-evb:spear320,usbtty
+spear320_hmi arm arm926ejs spear st spear spear320-hmi:spear320
+spear320_hmi_nand arm arm926ejs spear st spear spear320-hmi:spear320,nand
spear600 arm arm926ejs spear st spear spear600-evb:spear600
spear600_nand arm arm926ejs spear st spear spear600-evb:spear600,nand
spear600_usbtty arm arm926ejs spear st spear spear600-evb:spear600,usbtty
new file mode 100644
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2012
+ * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#if defined(CONFIG_usbtty)
+ #define CONFIG_SPEAR_USBTTY
+#endif
+
+#if defined(CONFIG_nand)
+ #define CONFIG_ENV_IS_IN_NAND
+#else
+ #define CONFIG_ENV_IS_IN_FLASH
+#endif
+
+#define CONFIG_MACH_SPEAR320HMI
+#define CONFIG_MACH_TYPE MACH_TYPE_SPEAR320
+
+/* ARASAN SD MMC configuration */
+#if !defined(CONFIG_SPEAR_USBTTY)
+ #define CONFIG_SPEAR_SDHCI
+#endif
+
+/* MACB configurations */
+#if !defined(CONFIG_SPEAR_USBTTY)
+ #define CONFIG_MACB
+ #define CONFIG_MACB0_PHY 0x01
+ #define CONFIG_MACB1_PHY 0x00
+#endif
+
+/* Designware I2C configurations */
+#if !defined(CONFIG_SPEAR_USBTTY)
+ #define CONFIG_DW_I2C
+ #define CONFIG_I2C_CHIPADDRESS 0x50
+ #define CONFIG_SYS_I2C_SPEED 400000
+ #define CONFIG_SYS_I2C_SLAVE 0x02
+#endif
+
+/* AMBA PL011 configurations */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_CONS_INDEX 0
+
+/* GPIO configurations */
+#define CONFIG_SPEAR_GPIO
+
+/* USB EHCI configurations */
+#if !defined(CONFIG_SPEAR_USBTTY)
+ #define CONFIG_USB_EHCI_SPEAR
+#endif
+
+/* Designware UDC configurations */
+#if defined(CONFIG_SPEAR_USBTTY)
+ #define CONFIG_DW_UDC
+#endif
+
+/* FSMC NAND configurations */
+#define CONFIG_NAND_FSMC
+#define CONFIG_SYS_FSMC_NAND_8BIT
+
+/* Flash configurations */
+#define CONFIG_ST_SMI
+
+/* SPL support */
+#define CONFIG_SPL
+#define CONFIG_SPEAR_DDR_2HCLK
+#define CONFIG_DDR_MT47H64M16
+
+/* Environment Variable configs */
+#if defined(CONFIG_ENV_IS_IN_FLASH)
+ /* Environment is in serial NOR flash */
+ #define CONFIG_ENV_ADDR 0xF8060000
+ #define CONFIG_ENV_SECT_SIZE 0x00010000
+ #define CONFIG_SPEAR_ROOTFSBLK "/dev/mtdblock5 "
+ #define CONFIG_BOOTCOMMAND \
+ "bootm 0xf8080000 - 0xf8070000"
+#elif defined(CONFIG_ENV_IS_IN_NAND)
+ /* Environment is in NAND */
+ #define CONFIG_ENV_OFFSET 0x00140000
+ #define CONFIG_SPEAR_ROOTFSBLK "/dev/mtdblock11 "
+
+ #define CONFIG_BOOTCOMMAND "" \
+ "nand read.jffs2 0x800000 0x180000 0x020000; " \
+ "nand read.jffs2 0x900000 0x1c0000 0x4C0000; " \
+ "bootm 0x900000 - 0x800000"
+#endif
+
+#define CONFIG_BOOTARGS "console=ttyAMA0,115200 " \
+ "root="CONFIG_SPEAR_ROOTFSBLK \
+ "rootfstype=jffs2"
+
+#define CONFIG_BOARD_EXTRA_ENV "" \
+ "loados=tftpboot 0x900000 $(rootpath)/spear3xx_uImage\0" \
+ "loaddtb=tftpboot 0x800000 $(rootpath)/spear320-hmi.dtb\0"
+
+#include <configs/spear320.h>
+#endif /* __CONFIG_H */
Signed-off-by: Vipin Kumar <vipin.kumar@st.com> --- MAINTAINERS | 1 + board/st/spear/Makefile | 1 + board/st/spear/spear320hmi.c | 120 +++++++++++++++++++++++++++++++++++++++++ board/st/spear/spear_common.c | 2 + boards.cfg | 2 + include/configs/spear320-hmi.h | 117 ++++++++++++++++++++++++++++++++++++++++ 6 files changed, 243 insertions(+) create mode 100644 board/st/spear/spear320hmi.c create mode 100644 include/configs/spear320-hmi.h