Patchwork [v3,01/10] net/macb: Add support for Gigabit Ethernet mode

login
register
mail settings
Submitter Nicolas Ferre
Date Oct. 30, 2012, 10:17 a.m.
Message ID <f614a440bd48509e8f36c84794808dd05110b5e6.1351591858.git.nicolas.ferre@atmel.com>
Download mbox | patch
Permalink /patch/195407/
State Superseded
Delegated to: David Miller
Headers show

Comments

Nicolas Ferre - Oct. 30, 2012, 10:17 a.m.
From: Patrice Vilchez <patrice.vilchez@atmel.com>

Add Gigabit Ethernet mode to GEM cadence IP and enable RGMII connection.

Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 drivers/net/ethernet/cadence/macb.c | 15 ++++++++++++---
 drivers/net/ethernet/cadence/macb.h |  4 ++++
 2 files changed, 16 insertions(+), 3 deletions(-)

Patch

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index 6a4f499..0931cb7 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -152,13 +152,17 @@  static void macb_handle_link_change(struct net_device *dev)
 
 			reg = macb_readl(bp, NCFGR);
 			reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
+			if (macb_is_gem(bp))
+				reg &= ~GEM_BIT(GBE);
 
 			if (phydev->duplex)
 				reg |= MACB_BIT(FD);
 			if (phydev->speed == SPEED_100)
 				reg |= MACB_BIT(SPD);
+			if (phydev->speed == SPEED_1000)
+				reg |= GEM_BIT(GBE);
 
-			macb_writel(bp, NCFGR, reg);
+			macb_or_gem_writel(bp, NCFGR, reg);
 
 			bp->speed = phydev->speed;
 			bp->duplex = phydev->duplex;
@@ -216,7 +220,10 @@  static int macb_mii_probe(struct net_device *dev)
 	}
 
 	/* mask with MAC supported features */
-	phydev->supported &= PHY_BASIC_FEATURES;
+	if (macb_is_gem(bp))
+		phydev->supported &= PHY_GBIT_FEATURES;
+	else
+		phydev->supported &= PHY_BASIC_FEATURES;
 
 	phydev->advertising = phydev->supported;
 
@@ -1388,7 +1395,9 @@  static int __init macb_probe(struct platform_device *pdev)
 		bp->phy_interface = err;
 	}
 
-	if (bp->phy_interface == PHY_INTERFACE_MODE_RMII)
+	if (bp->phy_interface == PHY_INTERFACE_MODE_RGMII)
+		macb_or_gem_writel(bp, USRIO, GEM_BIT(RGMII));
+	else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII)
 #if defined(CONFIG_ARCH_AT91)
 		macb_or_gem_writel(bp, USRIO, (MACB_BIT(RMII) |
 					       MACB_BIT(CLKEN)));
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index a362751..33a050f 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -149,6 +149,8 @@ 
 #define MACB_IRXFCS_SIZE			1
 
 /* GEM specific NCFGR bitfields. */
+#define GEM_GBE_OFFSET				10
+#define GEM_GBE_SIZE				1
 #define GEM_CLK_OFFSET				18
 #define GEM_CLK_SIZE				3
 #define GEM_DBW_OFFSET				21
@@ -252,6 +254,8 @@ 
 /* Bitfields in USRIO (AT91) */
 #define MACB_RMII_OFFSET			0
 #define MACB_RMII_SIZE				1
+#define GEM_RGMII_OFFSET			0	/* GEM gigabit mode */
+#define GEM_RGMII_SIZE				1
 #define MACB_CLKEN_OFFSET			1
 #define MACB_CLKEN_SIZE				1