[v2,17/19] target-mips: use deposit instead of hardcoded version

Submitted by Aurelien Jarno on Oct. 30, 2012, 12:12 a.m.

Details

Message ID 1351555932-19695-18-git-send-email-aurelien@aurel32.net
State New
Headers show

Commit Message

Aurelien Jarno Oct. 30, 2012, 12:12 a.m.
Use the deposit op instead of and hardcoded bit field insertion. It
allows the host to emit the corresponding instruction if available.

At the same time remove the (lsb > msb) test. The MIPS64R2 instruction
set manual says "Because of the instruction format, lsb can never be
greater than msb, so there is no UNPREDICATABLE case for this
instruction."

(Bug reported as LP:1071149.)
Cc: Никита Канунников <n.kanunnikov@sbtcom.ru>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
---
 target-mips/translate.c |   32 ++++----------------------------
 1 file changed, 4 insertions(+), 28 deletions(-)

Patch hide | download patch | download mbox

diff --git a/target-mips/translate.c b/target-mips/translate.c
index bfc7cc7..1734aa7 100644
--- a/target-mips/translate.c
+++ b/target-mips/translate.c
@@ -3386,7 +3386,6 @@  static void gen_bitops (DisasContext *ctx, uint32_t opc, int rt,
 {
     TCGv t0 = tcg_temp_new();
     TCGv t1 = tcg_temp_new();
-    target_ulong mask;
 
     gen_load_gpr(t1, rs);
     switch (opc) {
@@ -3419,45 +3418,22 @@  static void gen_bitops (DisasContext *ctx, uint32_t opc, int rt,
     case OPC_INS:
         if (lsb > msb)
             goto fail;
-        mask = ((msb - lsb + 1 < 32) ? ((1 << (msb - lsb + 1)) - 1) : ~0) << lsb;
         gen_load_gpr(t0, rt);
-        tcg_gen_andi_tl(t0, t0, ~mask);
-        tcg_gen_shli_tl(t1, t1, lsb);
-        tcg_gen_andi_tl(t1, t1, mask);
-        tcg_gen_or_tl(t0, t0, t1);
+        tcg_gen_deposit_tl(t0, t0, t1, lsb, msb - lsb + 1);
         tcg_gen_ext32s_tl(t0, t0);
         break;
 #if defined(TARGET_MIPS64)
     case OPC_DINSM:
-        if (lsb > msb)
-            goto fail;
-        mask = ((msb - lsb + 1 + 32 < 64) ? ((1ULL << (msb - lsb + 1 + 32)) - 1) : ~0ULL) << lsb;
         gen_load_gpr(t0, rt);
-        tcg_gen_andi_tl(t0, t0, ~mask);
-        tcg_gen_shli_tl(t1, t1, lsb);
-        tcg_gen_andi_tl(t1, t1, mask);
-        tcg_gen_or_tl(t0, t0, t1);
+        tcg_gen_deposit_tl(t0, t0, t1, lsb, msb + 32 - lsb + 1);
         break;
     case OPC_DINSU:
-        if (lsb > msb)
-            goto fail;
-        mask = ((1ULL << (msb - lsb + 1)) - 1) << (lsb + 32);
         gen_load_gpr(t0, rt);
-        tcg_gen_andi_tl(t0, t0, ~mask);
-        tcg_gen_shli_tl(t1, t1, lsb + 32);
-        tcg_gen_andi_tl(t1, t1, mask);
-        tcg_gen_or_tl(t0, t0, t1);
+        tcg_gen_deposit_tl(t0, t0, t1, lsb + 32, msb - lsb + 1);
         break;
     case OPC_DINS:
-        if (lsb > msb)
-            goto fail;
         gen_load_gpr(t0, rt);
-        mask = ((1ULL << (msb - lsb + 1)) - 1) << lsb;
-        gen_load_gpr(t0, rt);
-        tcg_gen_andi_tl(t0, t0, ~mask);
-        tcg_gen_shli_tl(t1, t1, lsb);
-        tcg_gen_andi_tl(t1, t1, mask);
-        tcg_gen_or_tl(t0, t0, t1);
+        tcg_gen_deposit_tl(t0, t0, t1, lsb, msb - lsb + 1);
         break;
 #endif
     default: