Patchwork [U-Boot] M68K: eb_cpu5282: general update and enhanced board support

login
register
mail settings
Submitter esw@bus-elektronik.de
Date Oct. 29, 2012, 3:16 p.m.
Message ID <1351523776-28777-1-git-send-email-esw@bus-elektronik.de>
Download mbox | patch
Permalink /patch/195028/
State Superseded
Delegated to: Jason Jin
Headers show

Comments

esw@bus-elektronik.de - Oct. 29, 2012, 3:16 p.m.
From: "Jens Scharsig (BuS Elektronik)" <esw@bus-elektronik.de>

- update clock settings for higher perfomance
- change standard baud rate to 115200
- fix flash base address
- remove unused defines
- add I2C support
- switch form board dependent flash to cfi
- remove board dependent flash code
- use sdram bank 0 instead of bank 1 on boot
- enable on board frame buffer instead external
- remove fake mac address form config
- add watchdog support
- add status led support

Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
---
 board/BuS/eb_cpu5282/Makefile     |    2 +-
 board/BuS/eb_cpu5282/cfm_flash.c  |  212 -------------------
 board/BuS/eb_cpu5282/cfm_flash.h  |   40 ----
 board/BuS/eb_cpu5282/config.mk    |   27 ---
 board/BuS/eb_cpu5282/eb_cpu5282.c |  102 ++++++---
 board/BuS/eb_cpu5282/flash.c      |  415 -------------------------------------
 boards.cfg                        |    2 +-
 include/configs/eb_cpu5282.h      |  101 +++++----
 8 files changed, 142 insertions(+), 759 deletions(-)
 delete mode 100644 board/BuS/eb_cpu5282/cfm_flash.c
 delete mode 100644 board/BuS/eb_cpu5282/cfm_flash.h
 delete mode 100644 board/BuS/eb_cpu5282/config.mk
 delete mode 100644 board/BuS/eb_cpu5282/flash.c

Patch

diff --git a/board/BuS/eb_cpu5282/Makefile b/board/BuS/eb_cpu5282/Makefile
index 0f14699..ac860c1 100644
--- a/board/BuS/eb_cpu5282/Makefile
+++ b/board/BuS/eb_cpu5282/Makefile
@@ -25,7 +25,7 @@  include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	= $(BOARD).o cfm_flash.o flash.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/BuS/eb_cpu5282/cfm_flash.c b/board/BuS/eb_cpu5282/cfm_flash.c
deleted file mode 100644
index fe03b17..0000000
--- a/board/BuS/eb_cpu5282/cfm_flash.c
+++ /dev/null
@@ -1,212 +0,0 @@ 
-/*
- * Basic Flash Driver for Freescale MCF 5281/5282 internal FLASH
- *
- * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/m5282.h>
-#include  "cfm_flash.h"
-
-#if defined(CONFIG_M5281) || defined(CONFIG_M5282)
-
-#if (CONFIG_SYS_CLK>20000000)
-	#define CFM_CLK  (((long) CONFIG_SYS_CLK / (400000 * 8) + 1) | 0x40)
-#else
-	#define CFM_CLK  ((long) CONFIG_SYS_CLK / 400000 + 1)
-#endif
-
-#define cmf_backdoor_address(addr)	(((addr) & 0x0007FFFF) | 0x04000000 | \
-					 (CONFIG_SYS_MBAR & 0xC0000000))
-
-void cfm_flash_print_info (flash_info_t * info)
-{
-	printf ("Freescale: ");
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FREESCALE_ID_MCF5281 & FLASH_TYPEMASK:
-		printf ("MCF5281 internal FLASH\n");
-		break;
-	case FREESCALE_ID_MCF5282 & FLASH_TYPEMASK:
-		printf ("MCF5282 internal FLASH\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-}
-
-void cfm_flash_init (flash_info_t * info)
-{
-	int sector;
-	ulong protection;
-	MCFCFM_MCR = 0;
-	MCFCFM_CLKD = CFM_CLK;
-	debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
-		CONFIG_SYS_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
-		CONFIG_SYS_CLK);
-	MCFCFM_SACC = 0;
-	MCFCFM_DACC = 0;
-
-	if (MCFCFM_SEC & MCFCFM_SEC_KEYEN)
-		puts("CFM backdoor access is enabled\n");
-	if (MCFCFM_SEC & MCFCFM_SEC_SECSTAT)
-		puts("CFM securety is enabled\n");
-
-	#ifdef CONFIG_M5281
-		info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
-				 (FREESCALE_ID_MCF5281 & FLASH_TYPEMASK);
-		info->size = 256*1024;
-		info->sector_count = 16;
-	#else
-		info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
-				 (FREESCALE_ID_MCF5282 & FLASH_TYPEMASK);
-		info->size = 512*1024;
-		info->sector_count = 32;
-	#endif
-	protection = MCFCFM_PROT;
-	for (sector = 0; sector < info->sector_count; sector++)
-	{
-		if (sector == 0)
-		{
-			info->start[sector] = CONFIG_SYS_INT_FLASH_BASE;
-		}
-		else
-		{
-			info->start[sector] = info->start[sector-1] + 0x04000;
-		}
-		info->protect[sector] = protection & 1;
-		protection >>= 1;
-	}
-}
-
-int cfm_flash_readycheck(int checkblank)
-{
-	int	rc;
-	unsigned char state;
-
-	rc	= ERR_OK;
-	while (!(MCFCFM_USTAT & MCFCFM_USTAT_CCIF));
-	state = MCFCFM_USTAT;
-	if (state & MCFCFM_USTAT_ACCERR)
-	{
-		debug ("%s(): CFM access error",__FUNCTION__);
-		rc = ERR_PROG_ERROR;
-	}
-	if (state & MCFCFM_USTAT_PVIOL)
-	{
-		debug ("%s(): CFM protection violation",__FUNCTION__);
-		rc = ERR_PROTECTED;
-	}
-	if (checkblank)
-	{
-		if (!(state & MCFCFM_USTAT_BLANK))
-		{
-			debug ("%s(): CFM erras error",__FUNCTION__);
-			rc = ERR_NOT_ERASED;
-		}
-	}
-	MCFCFM_USTAT = state & 0x34; /* reset state */
-	return rc;
-}
-
-/* Erase 16KiB = 8 2KiB pages */
-
-int cfm_flash_erase_sector (flash_info_t * info, int sector)
-{
-	ulong address;
-	int page;
-	int rc;
-	rc= ERR_OK;
-	address = cmf_backdoor_address(info->start[sector]);
-	for (page=0; (page<8) && (rc==ERR_OK); page++)
-	{
-		*(volatile __u32*) address = 0;
-		MCFCFM_CMD = MCFCFM_CMD_PGERS;
-		MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
-		rc = cfm_flash_readycheck(0);
-		if (rc==ERR_OK)
-		{
-			*(volatile __u32*) address = 0;
-			MCFCFM_CMD = MCFCFM_CMD_PGERSVER;
-			MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
-			rc = cfm_flash_readycheck(1);
-		}
-		address += 0x800;
-	}
-	return rc;
-}
-
-int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int rc;
-	ulong dest, data;
-
-	rc = ERR_OK;
-	if (addr & 3)
-	{
-		debug ("Byte and Word alignment not supported\n");
-		rc = ERR_ALIGN;
-	}
-	if (cnt & 3)
-	{
-		debug ("Byte and Word transfer not supported\n");
-		rc = ERR_ALIGN;
-	}
-	dest = cmf_backdoor_address(addr);
-	while ((cnt>=4) && (rc == ERR_OK))
-	{
-		data = *((volatile u32 *) src);
-		*(volatile u32*) dest = data;
-		MCFCFM_CMD = MCFCFM_CMD_PGM;
-		MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
-		rc = cfm_flash_readycheck(0);
-		if (*(volatile u32*) addr != data) rc = ERR_PROG_ERROR;
-		src +=4;
-		dest +=4;
-		addr +=4;
-		cnt -=4;
-	}
-	return rc;
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-
-int cfm_flash_protect(flash_info_t * info,long sector,int prot)
-{
-	int rc;
-
-	rc= ERR_OK;
-	if (prot)
-	{
-		MCFCFM_PROT |= (1<<sector);
-		info->protect[sector]=1;
-	}
-	else
-	{
-		MCFCFM_PROT &= ~(1<<sector);
-		info->protect[sector]=0;
-	}
-	return rc;
-}
-
-#endif
-
-#endif
diff --git a/board/BuS/eb_cpu5282/cfm_flash.h b/board/BuS/eb_cpu5282/cfm_flash.h
deleted file mode 100644
index ed4e794..0000000
--- a/board/BuS/eb_cpu5282/cfm_flash.h
+++ /dev/null
@@ -1,40 +0,0 @@ 
-/*
- * Basic Flash Driver for Freescale MCF 5282 internal FLASH
- *
- * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CFM_FLASH_H_
-#define __CFM_FLASH_H_
-
-#define	FREESCALE_MANUFACT 0xFACFFACF
-#define	FREESCALE_ID_MCF5281 0x5281
-#define	FREESCALE_ID_MCF5282 0x5282
-
-extern void cfm_flash_print_info (flash_info_t * info);
-extern int cfm_flash_erase_sector (flash_info_t * info, int sector);
-extern void cfm_flash_init (flash_info_t * info);
-extern int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-extern int cfm_flash_protect(flash_info_t * info,long sector,int prot);
-#endif
-
-#endif
diff --git a/board/BuS/eb_cpu5282/config.mk b/board/BuS/eb_cpu5282/config.mk
deleted file mode 100644
index 18fb84e..0000000
--- a/board/BuS/eb_cpu5282/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@ 
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFE000000
-endif
diff --git a/board/BuS/eb_cpu5282/eb_cpu5282.c b/board/BuS/eb_cpu5282/eb_cpu5282.c
index d64ad1b..231ff77 100644
--- a/board/BuS/eb_cpu5282/eb_cpu5282.c
+++ b/board/BuS/eb_cpu5282/eb_cpu5282.c
@@ -35,18 +35,19 @@ 
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_VIDEO
 unsigned long display_width;
 unsigned long display_height;
+#endif
 
 /*---------------------------------------------------------------------------*/
 
 int checkboard (void)
 {
-	puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n");
+	puts("Board: EB+CPU5282 (BuS Elektronik GmbH & Co. KG)\n");
 #if (CONFIG_SYS_TEXT_BASE ==  CONFIG_SYS_INT_FLASH_BASE)
-	puts ("       Boot from Internal FLASH\n");
+	puts("       Boot from Internal FLASH\n");
 #endif
-
 	return 0;
 }
 
@@ -55,29 +56,39 @@  phys_size_t initdram (int board_type)
 	int size, i;
 
 	size = 0;
-	MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6
-			| MCFSDRAMC_DCR_RC ((15 * CONFIG_SYS_CLK) >> 4);
+	MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6 |
+			MCFSDRAMC_DCR_RC((15 * CONFIG_SYS_CLK / 1000000) >> 4);
+		asm (" nop");
 #ifdef CONFIG_SYS_SDRAM_BASE0
-
-	MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE0)
-			| MCFSDRAMC_DACR_CASL (1)
-			| MCFSDRAMC_DACR_CBM (3)
-			| MCFSDRAMC_DACR_PS_16;
+	MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CONFIG_SYS_SDRAM_BASE0)|
+		MCFSDRAMC_DACR_CASL(1) | MCFSDRAMC_DACR_CBM(3) |
+		MCFSDRAMC_DACR_PS_32;
+	asm (" nop");
 
 	MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V;
+	asm (" nop");
 
 	MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
+	asm (" nop");
+	for (i = 0; i < 10; i++)
+		asm (" nop");
 
-	*(unsigned short *) (CONFIG_SYS_SDRAM_BASE0) = 0xA5A5;
+	*(unsigned long *)(CONFIG_SYS_SDRAM_BASE0) = 0xA5A5A5A5;
+	asm (" nop");
 	MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE;
+	asm (" nop");
+
 	for (i = 0; i < 2000; i++)
 		asm (" nop");
-	mbar_writeLong (MCFSDRAMC_DACR0,
-			mbar_readLong (MCFSDRAMC_DACR0) | MCFSDRAMC_DACR_IMRS);
-	*(unsigned int *) (CONFIG_SYS_SDRAM_BASE0 + 0x220) = 0xA5A5;
-	size += CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+
+	MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IMRS;
+	asm (" nop");
+	/* write SDRAM mode register */
+	*(unsigned long *)(CONFIG_SYS_SDRAM_BASE0 + 0x80440) = 0xA5A5A5A5;
+	asm (" nop");
+	size += CONFIG_SYS_SDRAM_SIZE0 * 1024 * 1024;
 #endif
-#ifdef CONFIG_SYS_SDRAM_BASE1
+#ifdef CONFIG_SYS_SDRAM_BASE1xx
 	MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE1)
 			| MCFSDRAMC_DACR_CASL (1)
 			| MCFSDRAMC_DACR_CBM (3)
@@ -139,19 +150,53 @@  int misc_init_r(void)
 #ifdef	CONFIG_HW_WATCHDOG
 	hw_watchdog_init();
 #endif
-#ifndef CONFIG_VIDEO
-	vcxk_init(16, 16);
-#endif
 	return 1;
 }
 
-#if defined(CONFIG_VIDEO)
+#if defined(CONFIG_HW_WATCHDOG)
 
-/*
- ****h* EB+CPU5282-T1/drv_video_init
- * FUNCTION
- ***
- */
+void hw_watchdog_init(void)
+{
+	char *s;
+	int enable;
+
+	enable = 1;
+	s = getenv("watchdog");
+	if (s != NULL)
+		if ((strncmp(s, "off", 3) == 0) || (strncmp(s, "0", 1) == 0))
+			enable = 0;
+	if (enable)
+		MCFGPTA_GPTDDR  |= (1<<2);
+	else
+		MCFGPTA_GPTDDR  &= ~(1<<2);
+}
+
+void hw_watchdog_reset(void)
+{
+	MCFGPTA_GPTPORT  ^= (1<<2);
+}
+#endif
+
+void __led_toggle(led_id_t mask)
+{
+	MCFGPTA_GPTPORT ^= (1 << 3);
+}
+
+void __led_init(led_id_t mask, int state)
+{
+	__led_set(mask, state);
+	MCFGPTA_GPTDDR  |= (1 << 3) ;
+}
+
+void __led_set(led_id_t mask, int state)
+{
+	if (state == STATUS_LED_ON)
+		MCFGPTA_GPTPORT |= (1 << 3);
+	else
+		MCFGPTA_GPTPORT &= ~(1 << 3);
+}
+
+#if defined(CONFIG_VIDEO)
 
 int drv_video_init(void)
 {
@@ -159,13 +204,14 @@  int drv_video_init(void)
 	unsigned long splash;
 
 	printf("Init Video as ");
-
-	if ((s = getenv("displaywidth")) != NULL)
+	s = getenv("displaywidth");
+	if (s != NULL)
 		display_width = simple_strtoul(s, NULL, 10);
 	else
 		display_width = 256;
 
-	if ((s = getenv("displayheight")) != NULL)
+	s = getenv("displayheight");
+	if (s != NULL)
 		display_height = simple_strtoul(s, NULL, 10);
 	else
 		display_height = 256;
diff --git a/board/BuS/eb_cpu5282/flash.c b/board/BuS/eb_cpu5282/flash.c
deleted file mode 100644
index 8b7f957..0000000
--- a/board/BuS/eb_cpu5282/flash.c
+++ /dev/null
@@ -1,415 +0,0 @@ 
-/*
- * (C) Copyright 2005
- * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * Based On
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include  "cfm_flash.h"
-
-#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
-#define FLASH_BANK_SIZE 0x200000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case (AMD_MANUFACT & FLASH_VENDMASK):
-		printf ("AMD: ");
-		switch (info->flash_id & FLASH_TYPEMASK) {
-		case (AMD_ID_LV160B & FLASH_TYPEMASK):
-			printf ("AM29LV160B (16Bit)\n");
-			break;
-		default:
-			printf ("Unknown Chip Type\n");
-			break;
-		}
-		break;
-	case FREESCALE_MANUFACT & FLASH_VENDMASK:
-		cfm_flash_print_info (info);
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	puts ("  Size: ");
-	if ((info->size >> 20) > 0)
-	{
-		printf ("%ld MiB",info->size >> 20);
-	}
-	else
-	{
-		printf ("%ld KiB",info->size >> 10);
-	}
-	printf (" in %d Sectors\n", info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 4) == 0) {
-			printf ("\n    ");
-		}
-		printf ("%02d: %08lX%s  ", i,info->start[i],
-			info->protect[i] ? " P" : "  ");
-	}
-	printf ("\n\n");
-}
-
-unsigned long flash_init (void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-
-		switch (i)
-		{
-		case 1:
-			flash_info[i].flash_id =
-				(AMD_MANUFACT & FLASH_VENDMASK) |
-				(AMD_ID_LV160B & FLASH_TYPEMASK);
-			flash_info[i].size = FLASH_BANK_SIZE;
-			flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-			memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-			flashbase = PHYS_FLASH_1;
-			for (j = 0; j < flash_info[i].sector_count; j++) {
-				if (j == 0) {
-					/* 1st is 16 KiB */
-					flash_info[i].start[j] = flashbase;
-				}
-				if ((j >= 1) && (j <= 2)) {
-				/* 2nd and 3rd are 8 KiB */
-					flash_info[i].start[j] =
-						flashbase + 0x4000 + 0x2000 * (j - 1);
-				}
-				if (j == 3) {
-					/* 4th is 32 KiB */
-					flash_info[i].start[j] = flashbase + 0x8000;
-				}
-				if ((j >= 4) && (j <= 34)) {
-					/* rest is 256 KiB */
-					flash_info[i].start[j] =
-						flashbase + 0x10000 + 0x10000 * (j - 4);
-				}
-			}
-			break;
-		case 0:
-			cfm_flash_init (&flash_info[i]);
-			break;
-		default:
-			panic ("configured to many flash banks!\n");
-		}
-
-		size += flash_info[i].size;
-	}
-
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + 0xffff, &flash_info[0]);
-
-	return size;
-}
-
-#define CMD_READ_ARRAY		0x00F0
-#define CMD_UNLOCK1		0x00AA
-#define CMD_UNLOCK2		0x0055
-#define CMD_ERASE_SETUP		0x0080
-#define CMD_ERASE_CONFIRM	0x0030
-#define CMD_PROGRAM		0x00A0
-#define CMD_UNLOCK_BYPASS	0x0020
-
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(info->start[0] + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(info->start[0] + (0x000002AA<<1)))
-
-
-#define BIT_ERASE_DONE		0x0080
-#define BIT_RDY_MASK		0x0080
-#define BIT_PROGRAM_ERROR	0x0020
-#define BIT_TIMEOUT		0x80000000	/* our flag */
-
-#define ERR_READY -1
-
-int amd_flash_erase_sector(flash_info_t * info, int sector)
-{
-	int state;
-	ulong result;
-	ulong start;
-
-	volatile u16 *addr =
-				(volatile u16 *) (info->start[sector]);
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	*addr = CMD_ERASE_CONFIRM;
-
-	/* wait until flash is ready */
-	state = 0;
-	start = get_timer(0);
-
-	do {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-			state = ERR_TIMOUT;
-		}
-
-		if (!state && (result & 0xFFFF) & BIT_ERASE_DONE)
-			state = ERR_READY;
-	}
-	while (!state);
-	if (state == ERR_READY)
-		state = ERR_OK;
-
-	MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
-	return state;
-}
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int iflag, cflag;
-	int sector;
-	int rc;
-
-	rc = ERR_OK;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-	{
-		rc = ERR_UNKNOWN_FLASH_TYPE;
-	} /* (info->flash_id == FLASH_UNKNOWN) */
-
-	if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count)
-	{
-		rc = ERR_INVAL;
-	}
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) {
-
-		if (info->protect[sector])
-		{
-			putc('P'); /*  protected sector will not erase */
-		}
-		else
-		{
-			/* erase on unprotected sector */
-			puts("E\b");
-			switch (info->flash_id & FLASH_VENDMASK)
-			{
-			case (AMD_MANUFACT & FLASH_VENDMASK):
-				rc = amd_flash_erase_sector(info,sector);
-				break;
-			case (FREESCALE_MANUFACT & FLASH_VENDMASK):
-				rc = cfm_flash_erase_sector(info,sector);
-				break;
-			default:
-				return ERR_UNKNOWN_FLASH_VENDOR;
-			}
-			putc('.');
-		}
-	}
-	if (rc!=ERR_OK)
-	{
-		printf ("\n   ");
-		flash_perror (rc);
-	}
-	else
-	{
-		printf (" done\n");
-	}
-
-	udelay (10000);	/* allow flash to settle - wait 10 ms */
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return rc;
-}
-
-volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
-{
-	volatile u16 *addr;
-	ulong result;
-	int cflag, iflag;
-	int state;
-	ulong start;
-
-	/*
-	 * Check if Flash is (sufficiently) erased
-	 */
-	addr = (volatile u16 *) dest;
-
-	result = *addr;
-	if ((result & data) != data)
-		return ERR_NOT_ERASED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_PROGRAM;
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0);
-
-	/* wait until flash is ready */
-	state = 0;
-	do {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-				state = ERR_TIMOUT;
-		}
-		if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
-			state = ERR_READY;
-
-	} while (!state);
-
-	*addr = CMD_READ_ARRAY;
-
-	if (state == ERR_READY)
-		state = ERR_OK;
-	if ((*addr != data) && (state != ERR_TIMOUT))
-		state = ERR_PROG_ERROR;
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return state;
-}
-
-int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int rc;
-	ulong dest;
-	u16 data;
-
-	rc = ERR_OK;
-	if (addr & 1)
-	{
-		debug ("Byte alignment not supported\n");
-		rc = ERR_ALIGN;
-	}
-	if (cnt & 1)
-	{
-		debug ("Byte transfer not supported\n");
-		rc = ERR_ALIGN;
-	}
-
-	dest = addr;
-	while ((cnt>=2) && (rc == ERR_OK))
-	{
-		data = *((volatile u16 *) src);
-		rc=amd_write_word (info,dest,data);
-		src +=2;
-		dest +=2;
-		cnt -=2;
-	}
-	return rc;
-}
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	int rc;
-
-	switch (info->flash_id & FLASH_VENDMASK)
-	{
-		case (AMD_MANUFACT & FLASH_VENDMASK):
-			rc = amd_flash_write_buff(info,src,addr,cnt);
-			break;
-		case (FREESCALE_MANUFACT & FLASH_VENDMASK):
-			rc = cfm_flash_write_buff(info,src,addr,cnt);
-			break;
-		default:
-			rc = ERR_UNKNOWN_FLASH_VENDOR;
-	}
-	return rc;
-
-}
-int amd_flash_protect(flash_info_t * info,long sector,int prot)
-{
-	int rc;
-	rc= ERR_OK;
-	if (prot)
-	{
-		info->protect[sector]=1;
-	}
-	else
-	{
-		info->protect[sector]=0;
-	}
-	return rc;
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-
-int flash_real_protect(flash_info_t * info,long sector,int prot)
-{
-	int rc;
-
-	switch (info->flash_id & FLASH_VENDMASK)
-	{
-		case (AMD_MANUFACT & FLASH_VENDMASK):
-			rc = amd_flash_protect(info,sector,prot);
-			break;
-		case (FREESCALE_MANUFACT & FLASH_VENDMASK):
-			rc = cfm_flash_protect(info,sector,prot);
-			break;
-		default:
-			rc = ERR_UNKNOWN_FLASH_VENDOR;
-	}
-	return rc;
-}
-
-#endif
diff --git a/boards.cfg b/boards.cfg
index 7c1fc74..07699f7 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -361,7 +361,7 @@  M5235EVB                     m68k        mcf523x     m5235evb            freesca
 M5235EVB_Flash32             m68k        mcf523x     m5235evb            freescale      -           M5235EVB:NORFLASH_PS32BIT,SYS_TEXT_BASE=0xFFC00000
 cobra5272                    m68k        mcf52x2     cobra5272           -
 idmr                         m68k        mcf52x2
-eb_cpu5282                   m68k        mcf52x2     eb_cpu5282          BuS            -           eb_cpu5282:SYS_TEXT_BASE=0xFFE00000
+eb_cpu5282                   m68k        mcf52x2     eb_cpu5282          BuS            -           eb_cpu5282:SYS_TEXT_BASE=0xFF000000
 eb_cpu5282_internal          m68k        mcf52x2     eb_cpu5282          BuS            -           eb_cpu5282:SYS_TEXT_BASE=0xF0000000
 TASREG                       m68k        mcf52x2     tasreg              esd
 M5208EVBE                    m68k        mcf52x2     m5208evbe           freescale
diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h
index 9ecc10b..f1ce94e 100644
--- a/include/configs/eb_cpu5282.h
+++ b/include/configs/eb_cpu5282.h
@@ -38,7 +38,7 @@ 
 
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_BAUDRATE			115200
 
 #undef	CONFIG_MONITOR_IS_IN_RAM		/* starts uboot direct */
 
@@ -52,20 +52,24 @@ 
 #define CONFIG_RESET_TO_RETRY
 #define CONFIG_SPLASH_SCREEN
 
+#define CONFIG_HW_WATCHDOG
+
+#define CONFIG_STATUS_LED
+#define CONFIG_BOARD_SPECIFIC_LED
+#define STATUS_LED_ACTIVE		0
+#define STATUS_LED_BIT			0x0008	/* Timer7 GPIO */
+#define STATUS_LED_BOOT			0
+#define STATUS_LED_PERIOD		(CONFIG_SYS_HZ / 2)
+#define STATUS_LED_STATE		STATUS_LED_OFF
+
 /*----------------------------------------------------------------------*
  * Configuration for environment					*
  * Environment is in the second sector of the first 256k of flash	*
  *----------------------------------------------------------------------*/
 
-#ifndef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_ENV_ADDR		0xF003C000	/* End of 256K */
-#define CONFIG_ENV_SECT_SIZE	0x4000
-#define CONFIG_ENV_IS_IN_FLASH	1
-#else
-#define CONFIG_ENV_ADDR		0xFFE04000
-#define CONFIG_ENV_SECT_SIZE	0x2000
+#define CONFIG_ENV_ADDR		0xFF040000
+#define CONFIG_ENV_SECT_SIZE	0x00020000
 #define CONFIG_ENV_IS_IN_FLASH	1
-#endif
 
 /*
  * BOOTP options
@@ -78,26 +82,24 @@ 
 /*
  * Command line configuration.
  */
+#define CONFIG_CMDLINE_EDITING
 #include <config_cmd_default.h>
 
 #undef CONFIG_CMD_LOADB
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_LED
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 
 #define CONFIG_MCFTMR
 
-
 #define CONFIG_BOOTDELAY	5
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT	"\nEB+CPU5282> "
 #define	CONFIG_SYS_LONGHELP	1
 
-#if defined(CONFIG_CMD_KGDB)
 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size	*/
-#endif
 #define	CONFIG_SYS_PBSIZE 	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 #define	CONFIG_SYS_MAXARGS	16	/* max number of command args	*/
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
@@ -112,12 +114,12 @@ 
 /*----------------------------------------------------------------------*
  * Clock and PLL Configuration						*
  *----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ			10000000
-#define	CONFIG_SYS_CLK			58982400       /* 9,8304MHz * 6 */
+#define CONFIG_SYS_HZ			1000
+#define	CONFIG_SYS_CLK			80000000      /* 8MHz * 8 */
 
-/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
+/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
 
-#define CONFIG_SYS_MFD		0x01	/* PLL Multiplication Factor Devider */
+#define CONFIG_SYS_MFD		0x02	/* PLL Multiplication Factor Devider */
 #define CONFIG_SYS_RFD		0x00	/* PLL Reduce Frecuency Devider */
 
 /*----------------------------------------------------------------------*
@@ -135,7 +137,6 @@ 
 #define CONFIG_SYS_FEC0_MIIBASE		CONFIG_SYS_FEC0_IOBASE
 #define MCFFEC_TOUT_LOOP		50000
 
-#define CONFIG_ETHADDR			00:CF:52:82:EB:01
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
 
 /*-------------------------------------------------------------------------
@@ -151,7 +152,7 @@ 
  *-----------------------------------------------------------------------*/
 
 #define CONFIG_SYS_INIT_RAM_ADDR	0x20000000
-#define CONFIG_SYS_INIT_RAM_SIZE		0x10000
+#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
 #define CONFIG_SYS_GBL_DATA_OFFSET	\
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
@@ -161,12 +162,11 @@ 
  * (Set up by the startup code)
  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
-#define CONFIG_SYS_SDRAM_BASE1		0x00000000
-#define	CONFIG_SYS_SDRAM_SIZE1		16	/* SDRAM size in MB */
-
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_SDRAM_BASE1
-#define	CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_SDRAM_SIZE1
+#define CONFIG_SYS_SDRAM_BASE0		0x00000000
+#define	CONFIG_SYS_SDRAM_SIZE0		16	/* SDRAM size in MB */
 
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_SDRAM_BASE0
+#define	CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_SDRAM_SIZE0
 
 /* If M5282 port is fully implemented the monitor base will be behind
  * the vector table. */
@@ -190,16 +190,24 @@ 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
+#define CONFIG_FLASH_SHOW_PROGRESS	45
 
 #define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 #define	CONFIG_SYS_INT_FLASH_BASE	0xF0000000
 #define CONFIG_SYS_INT_FLASH_ENABLE	0x21
 
-#define	CONFIG_SYS_MAX_FLASH_SECT	35
-#define	CONFIG_SYS_MAX_FLASH_BANKS	2
+#define	CONFIG_SYS_MAX_FLASH_SECT	128
+#define	CONFIG_SYS_MAX_FLASH_BANKS	1
 #define	CONFIG_SYS_FLASH_ERASE_TOUT	10000000
 #define	CONFIG_SYS_FLASH_PROTECTION
 
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_SIZE		16*1024*1024
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE }
+
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
@@ -221,12 +229,16 @@ 
  * Memory bank definitions
  */
 
-#define CONFIG_SYS_CS0_BASE		0xFFE00000
+#define CONFIG_SYS_CS0_BASE		0xFF000000
 #define CONFIG_SYS_CS0_CTRL		0x00001980
-#define CONFIG_SYS_CS0_MASK		0x001F0001
+#define CONFIG_SYS_CS0_MASK		0x00FF0001
 
-#define CONFIG_SYS_CS3_BASE		0xE0000000
-#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS2_BASE		0xE0000000
+#define CONFIG_SYS_CS2_CTRL		0x00001980
+#define CONFIG_SYS_CS2_MASK		0x000F0001
+
+#define CONFIG_SYS_CS3_BASE		0xE0100000
+#define CONFIG_SYS_CS3_CTRL		0x00001980
 #define CONFIG_SYS_CS3_MASK		0x000F0001
 
 /*-----------------------------------------------------------------------
@@ -248,23 +260,42 @@ 
 #define CONFIG_SYS_PCDDR		0x0000000
 #define CONFIG_SYS_PCDAT		0x0000000
 
+#define CONFIG_SYS_PASPAR		0x0F0F
 #define CONFIG_SYS_PEHLPAR		0xC0
 #define CONFIG_SYS_PUAPAR		0x0F
 #define CONFIG_SYS_DDRUA		0x05
 #define CONFIG_SYS_PJPAR		0xFF
 
 /*-----------------------------------------------------------------------
+ * I2C
+ */
+
+#define CONFIG_HARD_I2C
+#define CONFIG_FSL_I2C
+
+#define CONFIG_SYS_I2C_OFFSET		0x00000300
+#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
+
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		0
+
+#ifdef CONFIG_CMD_DATE
+#define CONFIG_RTC_DS1338
+#define CONFIG_I2C_RTC_ADDR		0x68
+#endif
+
+/*-----------------------------------------------------------------------
  * VIDEO configuration
  */
 
 #define CONFIG_VIDEO
 
 #ifdef CONFIG_VIDEO
-#define	CONFIG_VIDEO_VCXK			1
+#define CONFIG_VIDEO_VCXK			1
 
 #define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN	2
 #define	CONFIG_SYS_VCXK_DOUBLEBUFFERED		1
-#define CONFIG_SYS_VCXK_BASE			CONFIG_SYS_CS3_BASE
+#define CONFIG_SYS_VCXK_BASE			CONFIG_SYS_CS2_BASE
 #define CONFIG_SYS_VCXK_AUTODETECT		1
 
 #define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT	MCFGPTB_GPTPORT