From patchwork Sat Oct 27 01:07:47 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Xiangfu Liu X-Patchwork-Id: 194594 X-Patchwork-Delegate: daniel.schwierzeck@googlemail.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id 32ACB2C00A6 for ; Sat, 27 Oct 2012 12:08:34 +1100 (EST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id CB9254A026; Sat, 27 Oct 2012 03:08:25 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id onvI3oN+r8aG; Sat, 27 Oct 2012 03:08:25 +0200 (CEST) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id E26424A02F; Sat, 27 Oct 2012 03:08:18 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 1FD1F4A027 for ; Sat, 27 Oct 2012 03:08:16 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id bOFtASKhyZKy for ; Sat, 27 Oct 2012 03:08:07 +0200 (CEST) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from mail-ea0-f172.google.com (mail-ea0-f172.google.com [209.85.215.172]) by theia.denx.de (Postfix) with ESMTPS id 655744A01F for ; Sat, 27 Oct 2012 03:08:06 +0200 (CEST) Received: by mail-ea0-f172.google.com with SMTP id k13so1094104eaa.3 for ; Fri, 26 Oct 2012 18:08:06 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=from:to:cc:subject:date:message-id:x-mailer:in-reply-to:references :x-gm-message-state; bh=cKOuvvGo5c8H6lWyzPSMfH/BzNG5hyB5FmGaqeQUUnU=; b=AFkJMlxYwOkHm0UrKrjiSk7TiL8SXrH4x61YCErAkCXi1o3cgK3dlRjBXqnKS0MbF0 G9//GjiJe9TXVk/RX4GHiZ5YkU+PcEF9JUqDlYRfFRQUOcczfdXh2ohYcSxPbNbtdF38 XAJtjF2z+kN4fPn34s+ELmJp0KV6Duq45bOufmW5k8aEDyzZMKgiVEHyIAa4/YR+aLyB uvFWlupbSsTIv57j0WhJAAia7GaIaw5bwIwCGx/7RXeGcn4fGaHkRasTGKXK6H5dygOB SCrqVZqVHrs/+nFtVl32ULivCS4hTDJeeXevSbSQTSV/qkgBGQAHiqCEfKuVmeBZpVvJ Q6Yw== Received: by 10.14.172.137 with SMTP id t9mr38167931eel.2.1351300085993; Fri, 26 Oct 2012 18:08:05 -0700 (PDT) Received: from localhost.localdomain (fidelio.qi-hardware.com. [213.239.211.82]) by mx.google.com with ESMTPS id e1sm6029310eem.3.2012.10.26.18.08.00 (version=TLSv1/SSLv3 cipher=OTHER); Fri, 26 Oct 2012 18:08:05 -0700 (PDT) From: xiangfu@openmobilefree.net To: u-boot@lists.denx.de Date: Sat, 27 Oct 2012 09:07:47 +0800 Message-Id: <1351300067-10182-2-git-send-email-xiangfu@openmobilefree.net> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1351300067-10182-1-git-send-email-xiangfu@openmobilefree.net> References: <1351300067-10182-1-git-send-email-xiangfu@openmobilefree.net> X-Gm-Message-State: ALoCoQk6LCeHJciDIVHJkieWUaZThGFk7RTnHqezQ2AK9EEaKofEiUmEnIdcPyrwDfg4D512Uh4n Subject: [U-Boot] [PATCH v7] qi_lb60: add nand spl support X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.11 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: u-boot-bounces@lists.denx.de Errors-To: u-boot-bounces@lists.denx.de From: Xiangfu The JZ4740 CPU can load 8KB from two different addresses: 1. the normal area up to 8KB starting from NAND flash address 0x00000000 2. the backup area up to 8KB starting from NAND flash address 0x00002000 Signed-off-by: Xiangfu Acked-by: Scott Wood --- Makefile | 12 +++ arch/mips/cpu/xburst/Makefile | 7 +- arch/mips/cpu/xburst/cpu.c | 4 + arch/mips/cpu/xburst/jz4740.c | 82 +++++++---------- arch/mips/cpu/xburst/spl/Makefile | 47 ++++++++++ arch/mips/cpu/xburst/spl/start.S | 63 +++++++++++++ board/qi/qi_lb60/Makefile | 4 + board/qi/qi_lb60/qi_lb60-spl.c | 30 +++++++ board/qi/qi_lb60/qi_lb60.c | 8 +- board/qi/qi_lb60/u-boot-spl.lds | 61 +++++++++++++ drivers/mtd/nand/jz4740_nand.c | 39 ++++++++- include/configs/qi_lb60.h | 175 ++++++++++++++++++------------------- 12 files changed, 386 insertions(+), 146 deletions(-) create mode 100644 arch/mips/cpu/xburst/spl/Makefile create mode 100644 arch/mips/cpu/xburst/spl/start.S create mode 100644 board/qi/qi_lb60/qi_lb60-spl.c create mode 100644 board/qi/qi_lb60/u-boot-spl.lds diff --git a/Makefile b/Makefile index 34d9075..a22778e 100644 --- a/Makefile +++ b/Makefile @@ -393,6 +393,10 @@ ALL-y += $(obj)u-boot-nodtb-tegra.bin endif endif +ifeq ($(CPU),xburst) +ALL-y += $(obj)u-boot-xburst.bin +endif + all: $(ALL-y) $(SUBDIR_EXAMPLES) $(obj)u-boot.dtb: $(obj)u-boot @@ -506,6 +510,14 @@ $(obj)u-boot-nodtb-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin endif endif +ifeq ($(CPU),xburst) +$(obj)u-boot-xburst.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin + dd if=$(obj)spl/u-boot-spl.bin of=$(obj)spl/u-boot-pad.bin conv=sync bs=8192 count=1 + dd if=$(obj)spl/u-boot-spl.bin of=$(obj)spl/u-boot-pad.bin conv=sync,notrunc oflag=append bs=8192 count=1 + tr '\0' '\377' < /dev/zero | dd of=$(obj)spl/u-boot-pad.bin conv=sync,notrunc oflag=append bs=16384 count=1 + cat $(obj)spl/u-boot-pad.bin u-boot.bin > $@ +endif + ifeq ($(CONFIG_SANDBOX),y) GEN_UBOOT = \ cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \ diff --git a/arch/mips/cpu/xburst/Makefile b/arch/mips/cpu/xburst/Makefile index b1f2ae4..ec35e55 100644 --- a/arch/mips/cpu/xburst/Makefile +++ b/arch/mips/cpu/xburst/Makefile @@ -24,9 +24,12 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).o +COBJS-y = cpu.o jz_serial.o + +ifneq ($(CONFIG_SPL_BUILD),y) START = start.o -SOBJS-y = -COBJS-y = cpu.o timer.o jz_serial.o +COBJS-y += timer.o +endif COBJS-$(CONFIG_JZ4740) += jz4740.o diff --git a/arch/mips/cpu/xburst/cpu.c b/arch/mips/cpu/xburst/cpu.c index ddcbfaa..1432838 100644 --- a/arch/mips/cpu/xburst/cpu.c +++ b/arch/mips/cpu/xburst/cpu.c @@ -42,6 +42,8 @@ : \ : "i" (op), "R" (*(unsigned char *)(addr))) +#ifndef CONFIG_SPL_BUILD + void __attribute__((weak)) _machine_restart(void) { struct jz4740_wdt *wdt = (struct jz4740_wdt *)JZ4740_WDT_BASE; @@ -109,6 +111,8 @@ void invalidate_dcache_range(ulong start_addr, ulong stop) cache_op(Hit_Invalidate_D, addr); } +#endif + void flush_icache_all(void) { u32 addr, t = 0; diff --git a/arch/mips/cpu/xburst/jz4740.c b/arch/mips/cpu/xburst/jz4740.c index c0b9817..8816aa3 100644 --- a/arch/mips/cpu/xburst/jz4740.c +++ b/arch/mips/cpu/xburst/jz4740.c @@ -32,31 +32,19 @@ int disable_interrupts(void) return 0; } -/* - * PLL output clock = EXTAL * NF / (NR * NO) - * NF = FD + 2, NR = RD + 2 - * NO = 1 (if OD = 0), NO = 2 (if OD = 1 or 2), NO = 4 (if OD = 3) - */ void pll_init(void) { struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE; - register unsigned int cfcr, plcr1; - int n2FR[33] = { - 0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0, - 7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0, - 9 - }; - int div[5] = {1, 3, 3, 3, 3}; /* divisors of I:S:P:L:M */ - int nf, pllout2; + register unsigned int cfcr, plcr; + unsigned int nf, pllout2; cfcr = CPM_CPCCR_CLKOEN | - CPM_CPCCR_PCS | - (n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) | - (n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) | - (n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) | - (n2FR[div[3]] << CPM_CPCCR_MDIV_BIT) | - (n2FR[div[4]] << CPM_CPCCR_LDIV_BIT); + (0 << CPM_CPCCR_CDIV_BIT) | + (2 << CPM_CPCCR_HDIV_BIT) | + (2 << CPM_CPCCR_PDIV_BIT) | + (2 << CPM_CPCCR_MDIV_BIT) | + (2 << CPM_CPCCR_LDIV_BIT); pllout2 = (cfcr & CPM_CPCCR_PCS) ? CONFIG_SYS_CPU_SPEED : (CONFIG_SYS_CPU_SPEED / 2); @@ -65,15 +53,18 @@ void pll_init(void) writel(pllout2 / 48000000 - 1, &cpm->uhccdr); nf = CONFIG_SYS_CPU_SPEED * 2 / CONFIG_SYS_EXTAL; - plcr1 = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */ + plcr = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */ (0 << CPM_CPPCR_PLLN_BIT) | /* RD=0, NR=2 */ (0 << CPM_CPPCR_PLLOD_BIT) | /* OD=0, NO=1 */ - (0x20 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */ + (0x32 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */ CPM_CPPCR_PLLEN; /* enable PLL */ /* init PLL */ writel(cfcr, &cpm->cpccr); - writel(plcr1, &cpm->cppcr); + writel(plcr, &cpm->cppcr); + + while (!(readl(&cpm->cppcr) & CPM_CPPCR_PLLS)) + ; } void sdram_init(void) @@ -92,26 +83,12 @@ void sdram_init(void) 2 << EMC_DMCR_TCL_BIT /* CAS latency is 3 */ }; - int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32}; - cpu_clk = CONFIG_SYS_CPU_SPEED; - mem_clk = cpu_clk * div[__cpm_get_cdiv()] / div[__cpm_get_mdiv()]; + mem_clk = 84000000; writel(0, &emc->bcr); /* Disable bus release */ writew(0, &emc->rtcsr); /* Disable clock for counting */ - /* Fault DMCR value for mode register setting*/ -#define SDRAM_ROW0 11 -#define SDRAM_COL0 8 -#define SDRAM_BANK40 0 - - dmcr0 = ((SDRAM_ROW0 - 11) << EMC_DMCR_RA_BIT) | - ((SDRAM_COL0 - 8) << EMC_DMCR_CA_BIT) | - (SDRAM_BANK40 << EMC_DMCR_BA_BIT) | - (SDRAM_BW16 << EMC_DMCR_BW_BIT) | - EMC_DMCR_EPIN | - cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)]; - /* Basic DMCR value */ dmcr = ((SDRAM_ROW - 11) << EMC_DMCR_RA_BIT) | ((SDRAM_COL - 8) << EMC_DMCR_CA_BIT) | @@ -128,31 +105,31 @@ void sdram_init(void) if (tmp > 11) tmp = 11; dmcr |= (tmp - 4) << EMC_DMCR_TRAS_BIT; - tmp = SDRAM_RCD / ns; + tmp = SDRAM_RCD / ns; if (tmp > 3) tmp = 3; dmcr |= tmp << EMC_DMCR_RCD_BIT; - tmp = SDRAM_TPC / ns; + tmp = SDRAM_TPC / ns; if (tmp > 7) tmp = 7; dmcr |= tmp << EMC_DMCR_TPC_BIT; - tmp = SDRAM_TRWL / ns; + tmp = SDRAM_TRWL / ns; if (tmp > 3) tmp = 3; dmcr |= tmp << EMC_DMCR_TRWL_BIT; - tmp = (SDRAM_TRAS + SDRAM_TPC) / ns; + tmp = (SDRAM_TRAS + SDRAM_TPC) / ns; if (tmp > 14) tmp = 14; dmcr |= ((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT; /* SDRAM mode value */ - sdmode = EMC_SDMR_BT_SEQ | - EMC_SDMR_OM_NORMAL | - EMC_SDMR_BL_4 | + sdmode = EMC_SDMR_BT_SEQ | + EMC_SDMR_OM_NORMAL | + EMC_SDMR_BL_4 | cas_latency_sdmr[((SDRAM_CASL == 3) ? 1 : 0)]; /* Stage 1. Precharge all banks by writing SDMR with DMCR.MRSET=0 */ @@ -172,8 +149,8 @@ void sdram_init(void) if (tmp > 0xff) tmp = 0xff; writew(tmp, &emc->rtcor); + writew(0, &emc->rtcnt); - /* Divisor is 64, CKO/64 */ writew(EMC_RTCSR_CKS_64, &emc->rtcsr); /* Wait for number of auto-refresh cycles */ @@ -182,13 +159,17 @@ void sdram_init(void) ; /* Stage 3. Mode Register Set */ + dmcr0 = (11 << EMC_DMCR_RA_BIT) | + (8 << EMC_DMCR_CA_BIT) | + (0 << EMC_DMCR_BA_BIT) | + EMC_DMCR_EPIN | + (SDRAM_BW16 << EMC_DMCR_BW_BIT) | + cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)]; writel(dmcr0 | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr); writeb(0, JZ4740_EMC_SDMR0 | sdmode); /* Set back to basic DMCR value */ writel(dmcr | EMC_DMCR_RFSH | EMC_DMCR_MRSET, &emc->dmcr); - - /* everything is ok now */ } DECLARE_GLOBAL_DATA_PTR; @@ -232,9 +213,10 @@ void rtc_init(void) phys_size_t initdram(int board_type) { struct jz4740_emc *emc = (struct jz4740_emc *)JZ4740_EMC_BASE; - u32 dmcr; - u32 rows, cols, dw, banks; - ulong size; + + unsigned int dmcr; + unsigned int rows, cols, dw, banks; + unsigned long size; dmcr = readl(&emc->dmcr); rows = 11 + ((dmcr & EMC_DMCR_RA_MASK) >> EMC_DMCR_RA_BIT); diff --git a/arch/mips/cpu/xburst/spl/Makefile b/arch/mips/cpu/xburst/spl/Makefile new file mode 100644 index 0000000..f45e8c8 --- /dev/null +++ b/arch/mips/cpu/xburst/spl/Makefile @@ -0,0 +1,47 @@ +# +# Copyright (C) 2011 Xiangfu Liu +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(CPU).o + +START = start.o +SOBJS-y = +COBJS-y = + +SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) +START := $(addprefix $(obj),$(START)) + +all: $(obj).depend $(START) $(LIB) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/arch/mips/cpu/xburst/spl/start.S b/arch/mips/cpu/xburst/spl/start.S new file mode 100644 index 0000000..e31c4c8 --- /dev/null +++ b/arch/mips/cpu/xburst/spl/start.S @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2010 Xiangfu Liu + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 3 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include + +#include + + .set noreorder + + .globl _start + .text +_start: + .word JZ4740_NANDBOOT_CFG /* fetched during NAND Boot */ +reset: + /* + * STATUS register + * CU0=UM=EXL=IE=0, BEV=ERL=1, IP2~7=1 + */ + li t0, 0x0040FC04 + mtc0 t0, CP0_STATUS + /* + * CAUSE register + * IV=1, use the specical interrupt vector (0x200) + */ + li t1, 0x00800000 + mtc0 t1, CP0_CAUSE + + bal 1f + nop + .word _GLOBAL_OFFSET_TABLE_ +1: + move gp, ra + lw t1, 0(ra) + move gp, t1 + + la sp, 0x80004000 + la t9, nand_spl_boot + j t9 + nop diff --git a/board/qi/qi_lb60/Makefile b/board/qi/qi_lb60/Makefile index 5dae11b..e399246 100644 --- a/board/qi/qi_lb60/Makefile +++ b/board/qi/qi_lb60/Makefile @@ -22,7 +22,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o +ifeq ($(CONFIG_SPL_BUILD),y) +COBJS := $(BOARD)-spl.o +else COBJS := $(BOARD).o +endif SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/board/qi/qi_lb60/qi_lb60-spl.c b/board/qi/qi_lb60/qi_lb60-spl.c new file mode 100644 index 0000000..3fe3fa3 --- /dev/null +++ b/board/qi/qi_lb60/qi_lb60-spl.c @@ -0,0 +1,30 @@ +/* + * Authors: Xiangfu Liu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 3 of the License, or (at your option) any later version. + */ + +#include +#include +#include +#include + +void nand_spl_boot(void) +{ + __gpio_as_sdram_16bit_4720(); + __gpio_as_uart0(); + __gpio_jtag_to_uart0(); + + serial_init(); + + pll_init(); + sdram_init(); + + nand_init(); + + puts("\nQi LB60 SPL: Starting U-Boot ...\n"); + nand_boot(); +} diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c index d975209..3bd4e2f 100644 --- a/board/qi/qi_lb60/qi_lb60.c +++ b/board/qi/qi_lb60/qi_lb60.c @@ -1,5 +1,5 @@ /* - * Authors: Xiangfu Liu + * Authors: Xiangfu Liu * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -97,8 +97,10 @@ int board_early_init_f(void) /* U-Boot common routines */ int checkboard(void) { - printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed %ld MHz)\n", - gd->cpu_clk / 1000000); + printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC)\n"); + printf(" CPU: %ld\n", gd->cpu_clk); + printf(" MEM: %ld\n", gd->mem_clk); + printf(" DEV: %ld\n", gd->dev_clk); return 0; } diff --git a/board/qi/qi_lb60/u-boot-spl.lds b/board/qi/qi_lb60/u-boot-spl.lds new file mode 100644 index 0000000..930537f --- /dev/null +++ b/board/qi/qi_lb60/u-boot-spl.lds @@ -0,0 +1,61 @@ +/* + * (C) Copyright 2012 Xiangfu Liu + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips") + +OUTPUT_ARCH(mips) +ENTRY(_start) +SECTIONS +{ + . = 0x80000000; + . = ALIGN(4); + .text : + { + *(.text) + } + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .sdata : { *(.sdata) } + + _gp = ALIGN(16); + + __got_start = .; + .got : { *(.got) } + __got_end = .; + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + uboot_end_data = .; + num_got_entries = (__got_end - __got_start) >> 2; + + . = ALIGN(4); + .sbss : { *(.sbss) } + .bss : { *(.bss) } + uboot_end = .; +} +ASSERT(uboot_end <= 0x80002000, "NAND bootstrap too big"); diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c index 3ec34f3..24a4921 100644 --- a/drivers/mtd/nand/jz4740_nand.c +++ b/drivers/mtd/nand/jz4740_nand.c @@ -15,6 +15,9 @@ #include #include +#ifdef CONFIG_SPL_BUILD +#define printf(s) puts(s) +#endif #define JZ_NAND_DATA_ADDR ((void __iomem *)0xB8000000) #define JZ_NAND_CMD_ADDR (JZ_NAND_DATA_ADDR + 0x8000) #define JZ_NAND_ADDR_ADDR (JZ_NAND_DATA_ADDR + 0x10000) @@ -176,7 +179,7 @@ static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat, for (k = 0; k < 9; k++) writeb(read_ecc[k], &emc->nfpar[k]); } - /* Set PRDY */ + writel(readl(&emc->nfecr) | EMC_NFECR_PRDY, &emc->nfecr); /* Wait for completion */ @@ -184,7 +187,7 @@ static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat, status = readl(&emc->nfints); } while (!(status & EMC_NFINTS_DECF)); - /* disable ecc */ + /* Disable ECC */ writel(readl(&emc->nfecr) & ~EMC_NFECR_ECCE, &emc->nfecr); /* Check decoding */ @@ -192,7 +195,7 @@ static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat, return 0; if (status & EMC_NFINTS_UNCOR) { - printf("uncorrectable ecc\n"); + printf("JZ4740 uncorrectable ECC\n"); return -1; } @@ -230,6 +233,32 @@ static int jz_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat, return errcnt; } +#ifdef CONFIG_SPL_BUILD +static void jz_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + +#if (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B16R3) || \ + (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B16R2) + for (i = 0; i < len; i += 2) + buf[i] = readw(this->IO_ADDR_R); +#elif (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B8R3) || \ + (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B8R2) + for (i = 0; i < len; i++) + buf[i] = readb(this->IO_ADDR_R); +#else + #error JZ4740_NANDBOOT_CFG not defined or wrong +#endif +} + +static uint8_t jz_nand_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + return readb(this->IO_ADDR_R); +} +#endif + /* * Main initialization routine */ @@ -254,6 +283,10 @@ int board_nand_init(struct nand_chip *nand) nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; nand->ecc.layout = &qi_lb60_ecclayout_2gb; +#ifdef CONFIG_SPL_BUILD + nand->read_byte = jz_nand_read_byte; + nand->read_buf = jz_nand_read_buf; +#endif nand->chip_delay = 50; nand->options = NAND_USE_FLASH_BBT; diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h index 4bb5bbc..7bff444 100644 --- a/include/configs/qi_lb60.h +++ b/include/configs/qi_lb60.h @@ -1,5 +1,5 @@ /* - * Authors: Xiangfu Liu + * Authors: Xiangfu Liu * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -14,7 +14,6 @@ #define CONFIG_SYS_LITTLE_ENDIAN #define CONFIG_JZSOC /* Jz SoC */ #define CONFIG_JZ4740 /* Jz4740 SoC */ -#define CONFIG_NAND_JZ4740 #define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */ #define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */ @@ -24,24 +23,43 @@ #define CONFIG_SYS_UART_BASE JZ4740_UART0_BASE /* Base of the UART channel */ #define CONFIG_BAUDRATE 57600 +#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL) +#define CONFIG_BOOTDELAY 0 +#define CONFIG_BOOTARGS "mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait" +#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x280000;bootm" + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ +#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 +#define CONFIG_SYS_LOAD_ADDR 0x80600000 +#define CONFIG_SYS_MEMTEST_START 0x80100000 +#define CONFIG_SYS_MEMTEST_END 0x80A00000 +#define CONFIG_SYS_TEXT_BASE 0x80100000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) +#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) + +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PROMPT "NanoNote# " + #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_SYS_NO_FLASH #define CONFIG_SYS_FLASH_BASE 0 /* init flash_base as 0 */ -#define CONFIG_ENV_OVERWRITE - -#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL) -#define CONFIG_BOOTDELAY 0 -#define CONFIG_BOOTARGS "mem=32M console=tty0 console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait" -#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm" /* - * Command line configuration. + * Command line configuration */ #define CONFIG_CMD_BOOTD /* bootd */ #define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_ECHO /* echo arguments */ - #define CONFIG_CMD_LOADB /* loadb */ #define CONFIG_CMD_LOADS /* loads */ #define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */ @@ -58,45 +76,16 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ /* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "NanoNote# " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) - -#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ -#define CONFIG_SYS_INIT_SP_OFFSET 0x400000 -#define CONFIG_SYS_LOAD_ADDR 0x80600000 -#define CONFIG_SYS_MEMTEST_START 0x80100000 -#define CONFIG_SYS_MEMTEST_END 0x80800000 - -/* - * Environment + * NAND driver configuration */ -#define CONFIG_ENV_IS_IN_NAND /* use NAND for environment vars */ - -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -/* - * if board nand flash is 1GB, set to 1 - * if board nand flash is 2GB, set to 2 - * for change the PAGE_SIZE and BLOCK_SIZE - * will delete when there is no 1GB flash - */ -#define NANONOTE_NAND_SIZE 2 - -#define CONFIG_SYS_NAND_PAGE_SIZE (2048 * NANONOTE_NAND_SIZE) -#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * NANONOTE_NAND_SIZE << 10) -/* nand bad block was marked at this page in a block, start from 0 */ +#define CONFIG_NAND_JZ4740 +#define CONFIG_SYS_NAND_PAGE_SIZE 4096 +#define CONFIG_SYS_NAND_BLOCK_SIZE (512 << 10) +/* NAND bad block was marked at this page in a block, start from 0 */ #define CONFIG_SYS_NAND_BADBLOCK_PAGE 127 #define CONFIG_SYS_NAND_PAGE_COUNT 128 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 -/* ECC offset position in oob area, default value is 6 if it isn't defined */ -#define CONFIG_SYS_NAND_ECC_POS (6 * NANONOTE_NAND_SIZE) +#define CONFIG_SYS_NAND_ECC_POS 12 #define CONFIG_SYS_NAND_ECCSIZE 512 #define CONFIG_SYS_NAND_ECCBYTES 9 #define CONFIG_SYS_NAND_ECCPOS \ @@ -115,10 +104,9 @@ #define CONFIG_SYS_ONENAND_BASE CONFIG_SYS_NAND_BASE #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl.*/ -#define CONFIG_NAND_SPL_TEXT_BASE 0x80000000 /* - * IPL (Initial Program Loader, integrated inside CPU) + * IPL (Initial Program Loader, integrated inside Ingenic Xburst JZ4740 CPU) * Will load first 8k from NAND (SPL) into cache and execute it from there. * * SPL (Secondary Program Loader) @@ -130,77 +118,88 @@ * NUB (NAND U-Boot) * This NAND U-Boot (NUB) is a special U-Boot version which can be started * from RAM. Therefore it mustn't (re-)configure the SDRAM controller. - * */ + +/* + * NAND SPL configuration + */ +#define CONFIG_SPL +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_NAND_LOAD +#define CONFIG_SPL_NAND_SIMPLE +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_TEXT_BASE 0x80000000 +#define CONFIG_SPL_START_S_PATH "arch/mips/cpu/xburst/spl" + +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST +#define JZ4740_NANDBOOT_CFG JZ4740_NANDBOOT_B8R3 + #define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */ #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST -/* Start NUB from this addr*/ + /* Start NUB from this addr */ +#define CONFIG_SYS_NAND_U_BOOT_OFFS (32 << 10) /* Offset of NUB */ +#define CONFIG_SYS_NAND_U_BOOT_SIZE (256 << 10) /* Size of NUB */ /* - * Define the partitioning of the NAND chip (only RAM U-Boot is needed here) + * Environment configuration */ -#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */ -#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */ - +#define CONFIG_ENV_OVERWRITE +#define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE (4 << 10) #define CONFIG_ENV_OFFSET \ (CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE) #define CONFIG_ENV_OFFSET_REDUND \ (CONFIG_ENV_OFFSET + CONFIG_SYS_NAND_BLOCK_SIZE) -#define CONFIG_SYS_TEXT_BASE 0x80100000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - /* - * SDRAM Info. + * CPU cache configuration */ -#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_DCACHE_SIZE 16384 +#define CONFIG_SYS_ICACHE_SIZE 16384 +#define CONFIG_SYS_CACHELINE_SIZE 32 /* - * Cache Configuration + * SDRAM configuration */ -#define CONFIG_SYS_DCACHE_SIZE 16384 -#define CONFIG_SYS_ICACHE_SIZE 16384 -#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_NR_DRAM_BANKS 1 + +#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */ +#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */ +#define SDRAM_ROW 13 /* Row address: 11 to 13 */ +#define SDRAM_COL 9 /* Column address: 8 to 12 */ +#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */ +#define SDRAM_TRAS 45 /* RAS# Active Time */ +#define SDRAM_RCD 20 /* RAS# to CAS# Delay */ +#define SDRAM_TPC 20 /* RAS# Precharge Time */ +#define SDRAM_TRWL 7 /* Write Latency Time */ +#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */ /* - * GPIO definition + * GPIO configuration */ -#define GPIO_LCD_CS (2 * 32 + 21) -#define GPIO_AMP_EN (3 * 32 + 4) +#define GPIO_LCD_CS (2 * 32 + 21) +#define GPIO_AMP_EN (3 * 32 + 4) -#define GPIO_SDPW_EN (3 * 32 + 2) -#define GPIO_SD_DETECT (3 * 32 + 0) +#define GPIO_SDPW_EN (3 * 32 + 2) +#define GPIO_SD_DETECT (3 * 32 + 0) -#define GPIO_BUZZ_PWM (3 * 32 + 27) -#define GPIO_USB_DETECT (3 * 32 + 28) +#define GPIO_BUZZ_PWM (3 * 32 + 27) +#define GPIO_USB_DETECT (3 * 32 + 28) -#define GPIO_AUDIO_POP (1 * 32 + 29) -#define GPIO_COB_TEST (1 * 32 + 30) +#define GPIO_AUDIO_POP (1 * 32 + 29) +#define GPIO_COB_TEST (1 * 32 + 30) #define GPIO_KEYOUT_BASE (2 * 32 + 10) -#define GPIO_KEYIN_BASE (3 * 32 + 18) -#define GPIO_KEYIN_8 (3 * 32 + 26) +#define GPIO_KEYIN_BASE (3 * 32 + 18) +#define GPIO_KEYIN_8 (3 * 32 + 26) -#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */ +#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */ #define GPIO_SD_VCC_EN_N GPIO_SDPW_EN /* SD Card Power Enable */ #define SPEN GPIO_LCD_CS /* LCDCS :Serial command enable */ #define SPDA (2 * 32 + 22) /* LCDSCL:Serial command clock input */ #define SPCK (2 * 32 + 23) /* LCDSDA:Serial command data input */ -/* SDRAM paramters */ -#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */ -#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */ -#define SDRAM_ROW 13 /* Row address: 11 to 13 */ -#define SDRAM_COL 9 /* Column address: 8 to 12 */ -#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */ - -/* SDRAM Timings, unit: ns */ -#define SDRAM_TRAS 45 /* RAS# Active Time */ -#define SDRAM_RCD 20 /* RAS# to CAS# Delay */ -#define SDRAM_TPC 20 /* RAS# Precharge Time */ -#define SDRAM_TRWL 7 /* Write Latency Time */ -#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */ - #endif