@@ -31,17 +31,33 @@
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/boot_mode.h>
+struct scu_regs {
+ u32 ctrl;
+ u32 config;
+ u32 status;
+ u32 invalidate;
+ u32 fpga_rev;
+};
+
u32 get_cpu_rev(void)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
- int reg = readl(&anatop->digprog);
-
- /* Read mx6 variant: quad, dual or solo */
- int system_rev = (reg >> 4) & 0xFF000;
- /* Read mx6 silicon revision */
- system_rev |= (reg & 0xFF) + 0x10;
-
- return system_rev;
+ u32 reg = readl(&anatop->digprog_sololite);
+ u32 type = ((reg >> 16) & 0xff);
+
+ if (type != MXC_CPU_MX6SL) {
+ reg = readl(&anatop->digprog);
+ type = ((reg >> 16) & 0xff);
+ if (type == MXC_CPU_MX6DL) {
+ struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
+ u32 cfg = readl(&scu->config) & 3;
+
+ if (!cfg)
+ type = MXC_CPU_MX6SOLO;
+ }
+ }
+ reg &= 0xff; /* mx6 silicon revision */
+ return (type << 12) | (reg + 0x10);
}
void init_aips(void)
@@ -67,18 +67,20 @@ char *get_reset_cause(void)
#if defined(CONFIG_DISPLAY_CPUINFO)
-static const char *get_imx_type(u32 imxtype)
+const char *get_imx_type(u32 imxtype)
{
switch (imxtype) {
- case 0x63:
+ case MXC_CPU_MX6Q:
return "6Q"; /* Quad-core version of the mx6 */
- case 0x61:
- return "6DS"; /* Dual/Solo version of the mx6 */
- case 0x60:
+ case MXC_CPU_MX6DL:
+ return "6DL"; /* Dual Lite version of the mx6 */
+ case MXC_CPU_MX6SOLO:
+ return "6SOLO"; /* Solo version of the mx6 */
+ case MXC_CPU_MX6SL:
return "6SL"; /* Solo-Lite version of the mx6 */
- case 0x51:
+ case MXC_CPU_MX51:
return "51";
- case 0x53:
+ case MXC_CPU_MX53:
return "53";
default:
return "??";
@@ -24,8 +24,15 @@
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
-u32 get_cpu_rev(void);
+#define MXC_CPU_MX51 0x51
+#define MXC_CPU_MX53 0x53
+#define MXC_CPU_MX6SL 0x60
+#define MXC_CPU_MX6DL 0x61
+#define MXC_CPU_MX6SOLO 0x62
+#define MXC_CPU_MX6Q 0x63
+
#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev)
+u32 get_cpu_rev(void);
void sdelay(unsigned long);
void set_chipselect_size(int const);
@@ -564,6 +564,8 @@ struct anatop_regs {
u32 usb2_misc_clr; /* 0x258 */
u32 usb2_misc_tog; /* 0x25c */
u32 digprog; /* 0x260 */
+ u32 reserved1[7];
+ u32 digprog_sololite; /* 0x280 */
};
#define ANATOP_PFD_480_PFD0_FRAC_SHIFT 0
@@ -24,9 +24,16 @@
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
-#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev)
+#define MXC_CPU_MX51 0x51
+#define MXC_CPU_MX53 0x53
+#define MXC_CPU_MX6SL 0x60
+#define MXC_CPU_MX6DL 0x61
+#define MXC_CPU_MX6SOLO 0x62
+#define MXC_CPU_MX6Q 0x63
+#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev)
u32 get_cpu_rev(void);
+const char *get_imx_type(u32 imxtype);
void set_vddsoc(u32 mv);
Previously, the same value was returned for both mx6dl and mx6solo. Check number of processors to differeniate. Also, a freescale patch says that sololite has its cpu/rev stored at 0x280 instead of 0x260. I don't have a sololite to verify. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> --- --- arch/arm/cpu/armv7/mx6/soc.c | 32 +++++++++++++++++++++-------- arch/arm/imx-common/cpu.c | 16 ++++++++------- arch/arm/include/asm/arch-mx5/sys_proto.h | 9 +++++++- arch/arm/include/asm/arch-mx6/imx-regs.h | 2 ++ arch/arm/include/asm/arch-mx6/sys_proto.h | 9 +++++++- 5 files changed, 51 insertions(+), 17 deletions(-)