diff mbox

[U-Boot,V3,1/9] doc/README.fec_mxc: add documentation

Message ID 1350960047-23404-2-git-send-email-troy.kisky@boundarydevices.com
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Commit Message

Troy Kisky Oct. 23, 2012, 2:40 a.m. UTC 
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

---
v2: add README.fec_mxc for config options currently used
	in fec_mxc
---
 doc/README.fec_mxc |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)
 create mode 100644 doc/README.fec_mxc
diff mbox

Patch

diff --git a/doc/README.fec_mxc b/doc/README.fec_mxc
new file mode 100644
index 0000000..72a1d59
--- /dev/null
+++ b/doc/README.fec_mxc
@@ -0,0 +1,27 @@ 
+U-boot config options used in fec_mxc.c
+
+CONFIG_FEC_MXC
+	Selects fec_mxc.c to be compiled into u-boot.
+
+CONFIG_MII
+	Must be defined if CONFIG_FEC_MXC is defined.
+
+CONFIG_FEC_XCV_TYPE
+	Defaults to MII100 for 100 Base-tx.
+	RGMII selects 1000 Base-tx reduced pin count interface.
+	RMII selects 100 Base-tx reduced pin count interface.
+
+CONFIG_FEC_MXC_SWAP_PACKET
+	Forced on iff MX28.
+	Swaps the bytes order of all words(4 byte units) in the packet.
+	This should not be specified by a board file. It is cpu specific.
+
+CONFIG_PHYLIB
+	fec_mxc supports PHYLIB and should be used for new boards.
+
+CONFIG_FEC_MXC_NO_ANEG
+	Relevant only if PHYLIB not used. Skips auto-negotiation restart.
+
+CONFIG_FEC_MXC_PHYADDR
+	Optional, selects the exact phy address that should be connected
+	and function fecmxc_initialize will try to initialize it.