@@ -251,6 +251,8 @@ struct adapter_params {
unsigned char rev; /* chip revision */
unsigned char offload;
+ unsigned char bypass;
+
unsigned int ofldq_wr_cred;
};
@@ -642,6 +644,23 @@ extern int dbfifo_int_thresh;
#define for_each_port(adapter, iter) \
for (iter = 0; iter < (adapter)->params.nports; ++iter)
+static inline int is_bypass(struct adapter *adap)
+{
+ return adap->params.bypass;
+}
+
+static inline int is_bypass_device(int device)
+{
+ /* this should be set based upon device capabilities */
+ switch (device) {
+ case 0x440b:
+ case 0x440c:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
static inline unsigned int core_ticks_per_usec(const struct adapter *adap)
{
return adap->params.vpd.cclk / 1000;
@@ -3513,18 +3513,6 @@ static int adap_init0_no_config(struct adapter *adapter, int reset)
if (ret < 0)
goto bye;
-#ifndef CONFIG_CHELSIO_T4_OFFLOAD
- /*
- * If we're a pure NIC driver then disable all offloading facilities.
- * This will allow the firmware to optimize aspects of the hardware
- * configuration which will result in improved performance.
- */
- caps_cmd.ofldcaps = 0;
- caps_cmd.iscsicaps = 0;
- caps_cmd.rdmacaps = 0;
- caps_cmd.fcoecaps = 0;
-#endif
-
if (caps_cmd.niccaps & htons(FW_CAPS_CONFIG_NIC_VM)) {
if (!vf_acls)
caps_cmd.niccaps ^= htons(FW_CAPS_CONFIG_NIC_VM);
@@ -3745,6 +3733,7 @@ static int adap_init0(struct adapter *adap)
u32 v, port_vec;
enum dev_state state;
u32 params[7], val[7];
+ struct fw_caps_config_cmd caps_cmd;
int reset = 1, j;
/*
@@ -3898,6 +3887,9 @@ static int adap_init0(struct adapter *adap)
goto bye;
}
+ if (is_bypass_device(adap->pdev->device))
+ adap->params.bypass = 1;
+
/*
* Grab some of our basic fundamental operating parameters.
*/
@@ -3940,13 +3932,12 @@ static int adap_init0(struct adapter *adap)
adap->tids.aftid_end = val[1];
}
-#ifdef CONFIG_CHELSIO_T4_OFFLOAD
/*
* Get device capabilities so we can determine what resources we need
* to manage.
*/
memset(&caps_cmd, 0, sizeof(caps_cmd));
- caps_cmd.op_to_write = htonl(V_FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
+ caps_cmd.op_to_write = htonl(FW_CMD_OP(FW_CAPS_CONFIG_CMD) |
FW_CMD_REQUEST | FW_CMD_READ);
caps_cmd.retval_len16 = htonl(FW_LEN16(caps_cmd));
ret = t4_wr_mbox(adap, adap->mbox, &caps_cmd, sizeof(caps_cmd),
@@ -3991,15 +3982,6 @@ static int adap_init0(struct adapter *adap)
adap->vres.ddp.size = val[4] - val[3] + 1;
adap->params.ofldq_wr_cred = val[5];
- params[0] = FW_PARAM_PFVF(ETHOFLD_START);
- params[1] = FW_PARAM_PFVF(ETHOFLD_END);
- ret = t4_query_params(adap, adap->mbox, adap->fn, 0, 2,
- params, val);
- if ((val[0] != val[1]) && (ret >= 0)) {
- adap->tids.uotid_base = val[0];
- adap->tids.nuotids = val[1] - val[0] + 1;
- }
-
adap->params.offload = 1;
}
if (caps_cmd.rdmacaps) {
@@ -4048,7 +4030,6 @@ static int adap_init0(struct adapter *adap)
}
#undef FW_PARAM_PFVF
#undef FW_PARAM_DEV
-#endif /* CONFIG_CHELSIO_T4_OFFLOAD */
/*
* These are finalized by FW initialization, load their values now.
@@ -102,6 +102,9 @@ struct tid_info {
unsigned int ftid_base;
unsigned int aftid_base;
unsigned int aftid_end;
+ /* Server filter region */
+ unsigned int sftid_base;
+ unsigned int nsftids;
spinlock_t atid_lock ____cacheline_aligned_in_smp;
union aopen_entry *afree;
This patch also fixes the build failure caused due to removal of #ifdef CONFIG_CHELSIO_T4_OFFLOAD condition Signed-off-by: Vipul Pandya <vipul@chelsio.com> --- drivers/net/ethernet/chelsio/cxgb4/cxgb4.h | 19 +++++++++++++++ drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c | 29 ++++------------------- drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h | 3 ++ 3 files changed, 27 insertions(+), 24 deletions(-)