diff mbox

[3/3] uhci: Raise interrupt when requested even for non active tds

Message ID 1349955622-15183-4-git-send-email-kraxel@redhat.com
State New
Headers show

Commit Message

Gerd Hoffmann Oct. 11, 2012, 11:40 a.m. UTC 
From: Hans de Goede <hdegoede@redhat.com>

According to the spec we must raise an interrupt when one is requested
even for non active tds.

Linux depends on this, for bulk transfers it runs an inactivity timer
to work around a bug in early uhci revisions, when we take longer then
200 ms to process a packet, this timer goes of, and as part of the
handling Linux then unlinks the qh, and relinks it after the frindex
has increased by atleast 1, the problem is Linux only checks for the
frindex increases on an interrupt, and we don't send that, causing
the qh to go inactive for more then 32 frames, at which point we
consider the packet cancelled.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/usb/hcd-uhci.c |   10 +++++++++-
 1 files changed, 9 insertions(+), 1 deletions(-)
diff mbox

Patch

diff --git a/hw/usb/hcd-uhci.c b/hw/usb/hcd-uhci.c
index cdc8bc3..c2f08e3 100644
--- a/hw/usb/hcd-uhci.c
+++ b/hw/usb/hcd-uhci.c
@@ -826,8 +826,16 @@  static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td,
     USBEndpoint *ep;
 
     /* Is active ? */
-    if (!(td->ctrl & TD_CTRL_ACTIVE))
+    if (!(td->ctrl & TD_CTRL_ACTIVE)) {
+        /*
+         * ehci11d spec page 22: "Even if the Active bit in the TD is already
+         * cleared when the TD is fetched ... an IOC interrupt is generated"
+         */
+        if (td->ctrl & TD_CTRL_IOC) {
+                *int_mask |= 0x01;
+        }
         return TD_RESULT_NEXT_QH;
+    }
 
     async = uhci_async_find_td(s, addr, td);
     if (async) {