From patchwork Thu Oct 11 08:13:09 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Gerlando Falauto X-Patchwork-Id: 190833 X-Patchwork-Delegate: kim.phillips@freescale.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id 90A7C2C047B for ; Thu, 11 Oct 2012 19:14:13 +1100 (EST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 7F4AF4A226; Thu, 11 Oct 2012 10:13:58 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id Jcq57WF64-I3; Thu, 11 Oct 2012 10:13:58 +0200 (CEST) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id B28DD4A12D; Thu, 11 Oct 2012 10:13:28 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 24AF64A088 for ; Thu, 11 Oct 2012 10:13:21 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id GpAxHe9UyU6j for ; Thu, 11 Oct 2012 10:13:19 +0200 (CEST) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from mail-de.keymile.com (mail-de.keymile.com [195.8.104.1]) by theia.denx.de (Postfix) with SMTP id E744A4A094 for ; Thu, 11 Oct 2012 10:13:15 +0200 (CEST) Received: from mailrelay.de.keymile.net ([10.9.1.54]) by eSafe SMTP Relay 1349937517; Thu, 11 Oct 2012 10:13:15 +0200 Received: from chber1-10555x.ch.keymile.net (chber1-10555x.ch.keymile.net [172.31.40.82]) by mailrelay.de.keymile.net (8.12.2/8.12.2) with ESMTP id q9B8BsjD008357; Thu, 11 Oct 2012 10:11:58 +0200 (MEST) From: Gerlando Falauto To: u-boot@lists.denx.de Date: Thu, 11 Oct 2012 10:13:09 +0200 Message-Id: <1349943190-28854-6-git-send-email-gerlando.falauto@keymile.com> X-Mailer: git-send-email 1.7.10.1 In-Reply-To: <1349943190-28854-1-git-send-email-gerlando.falauto@keymile.com> References: <1348648090-861-1-git-send-email-gerlando.falauto@keymile.com><1349943190-28854-1-git-send-email-gerlando.falauto@keymile.com> X-ESAFE-STATUS: [srvhellgate.de.keymile.net] Mail clean Cc: Gerlando Falauto Subject: [U-Boot] [PATCH v2 5/6] km83xx: add common support for km8309 boards X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.11 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: u-boot-bounces@lists.denx.de Errors-To: u-boot-bounces@lists.denx.de Add support for Keymile boards based on mpc8309 (it would be only kmvect1 for now) Signed-off-by: Gerlando Falauto --- board/keymile/km83xx/km83xx.c | 2 +- include/configs/km/km8309-common.h | 176 ++++++++++++++++++++++++++++++++++++ include/configs/km/km83xx-common.h | 6 ++ 3 files changed, 183 insertions(+), 1 deletion(-) create mode 100644 include/configs/km/km8309-common.h diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index e01a633..0d59ce6 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -56,7 +56,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { {5, 2, 1, 0, 1}, /* UART2_RTS */ {5, 3, 2, 0, 2}, /* UART2_SIN */ {5, 1, 2, 0, 3}, /* UART2_CTS */ -#else +#elseif !defined(CONFIG_MPC8309) /* Local Bus */ {0, 16, 1, 0, 3}, /* LA00 */ {0, 17, 1, 0, 3}, /* LA01 */ diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h new file mode 100644 index 0000000..b36e892 --- /dev/null +++ b/include/configs/km/km8309-common.h @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2012 Keymile AG + * Gerlando Falauto + * + * Based on km8321-common.h, see respective copyright notice for credits + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#ifndef __CONFIG_KM8309_COMMON_H +#define __CONFIG_KM8309_COMMON_H + +/* + * High Level Configuration Options + */ +#define CONFIG_E300 1 /* E300 family */ +#define CONFIG_QE 1 /* Has QE */ +#define CONFIG_MPC83xx 1 /* MPC83xx family */ +#define CONFIG_MPC830x 1 /* MPC830x family */ +#define CONFIG_MPC8309 1 /* MPC8309 CPU specific */ + +#define CONFIG_KM_DEF_ARCH "arch=ppc_8xx\0" +#define CONFIG_CMD_DIAG 1 + +/* include common defines/options for all 83xx Keymile boards */ +#include "km83xx-common.h" + +/* QE microcode/firmware address */ +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +/* at end of uboot partition, before env */ +#define CONFIG_SYS_QE_FMAN_FW_ADDR 0xF00B0000 + +#define CONFIG_MISC_INIT_R + +/* + * System IO Config + */ +/* 0x14000180 SICR_1 */ +#define CONFIG_SYS_SICRL (0 \ + | SICR_1_UART1_UART1RTS \ + | SICR_1_I2C_CKSTOP \ + | SICR_1_IRQ_A_IRQ \ + | SICR_1_IRQ_B_IRQ \ + | SICR_1_GPIO_A_GPIO \ + | SICR_1_GPIO_B_GPIO \ + | SICR_1_GPIO_C_GPIO \ + | SICR_1_GPIO_D_GPIO \ + | SICR_1_GPIO_E_GPIO \ + | SICR_1_GPIO_F_GPIO \ + | SICR_1_USB_A_UART2S \ + | SICR_1_USB_B_UART2RTS \ + | SICR_1_FEC1_FEC1 \ + | SICR_1_FEC2_FEC2 \ + ) + +/* 0x00080400 SICR_2 */ +#define CONFIG_SYS_SICRH (0 \ + | SICR_2_FEC3_FEC3 \ + | SICR_2_HDLC1_A_HDLC1 \ + | SICR_2_ELBC_A_LA \ + | SICR_2_ELBC_B_LCLK \ + | SICR_2_HDLC2_A_HDLC2 \ + | SICR_2_USB_D_GPIO \ + | SICR_2_PCI_PCI \ + | SICR_2_HDLC1_B_HDLC1 \ + | SICR_2_HDLC1_C_HDLC1 \ + | SICR_2_HDLC2_B_GPIO \ + | SICR_2_HDLC2_C_HDLC2 \ + | SICR_2_QUIESCE_B \ + ) + +/* GPR_1 */ +#define CONFIG_SYS_GPR1 0x50008060 + +#define CONFIG_SYS_GP1DIR 0x00000000 +#define CONFIG_SYS_GP1ODR 0x00000000 +#define CONFIG_SYS_GP2DIR 0xFF000000 +#define CONFIG_SYS_GP2ODR 0x00000000 + +/* + * Hardware Reset Configuration Word + */ +#define CONFIG_SYS_HRCW_LOW (\ + HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \ + HRCWL_DDR_TO_SCB_CLK_2X1 | \ + HRCWL_CSB_TO_CLKIN_2X1 | \ + HRCWL_CORE_TO_CSB_2X1 | \ + HRCWL_CE_PLL_VCO_DIV_2 | \ + HRCWL_CE_TO_PLL_1X3) + +#define CONFIG_SYS_HRCW_HIGH (\ + HRCWH_PCI_AGENT | \ + HRCWH_PCI_ARBITER_DISABLE | \ + HRCWH_CORE_ENABLE | \ + HRCWH_FROM_0X00000100 | \ + HRCWH_BOOTSEQ_DISABLE | \ + HRCWH_SW_WATCHDOG_DISABLE | \ + HRCWH_ROM_LOC_LOCAL_16BIT | \ + HRCWH_BIG_ENDIAN | \ + HRCWH_LALE_NORMAL) + +#define CONFIG_SYS_DDR_CS0_BNDS 0x0000007f +#define CONFIG_SYS_DDR_SDRAM_CFG (SDRAM_CFG_SDRAM_TYPE_DDR2 | \ + SDRAM_CFG_32_BE | \ + SDRAM_CFG_SREN | \ + SDRAM_CFG_HSE) + +#define CONFIG_SYS_DDR_SDRAM_CFG2 0x00401000 +#define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) +#define CONFIG_SYS_DDR_INTERVAL ((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \ + (0x200 << SDRAM_INTERVAL_REFINT_SHIFT)) + +#define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN | CSCONFIG_AP | \ + CSCONFIG_ODT_RD_NEVER | \ + CSCONFIG_ODT_WR_ONLY_CURRENT | \ + CSCONFIG_ROW_BIT_13 | \ + CSCONFIG_COL_BIT_10) + +#define CONFIG_SYS_DDR_MODE 0x47860242 +#define CONFIG_SYS_DDR_MODE2 0x8080c000 + +#define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \ + (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \ + (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \ + (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \ + (0 << TIMING_CFG0_WWT_SHIFT) | \ + (0 << TIMING_CFG0_RRT_SHIFT) | \ + (0 << TIMING_CFG0_WRT_SHIFT) | \ + (0 << TIMING_CFG0_RWT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_40) | \ + (2 << TIMING_CFG1_WRTORD_SHIFT) | \ + (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \ + (3 << TIMING_CFG1_WRREC_SHIFT) | \ + (7 << TIMING_CFG1_REFREC_SHIFT) | \ + (3 << TIMING_CFG1_ACTTORW_SHIFT) | \ + (7 << TIMING_CFG1_ACTTOPRE_SHIFT) | \ + (3 << TIMING_CFG1_PRETOACT_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \ + (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \ + (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \ + (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \ + (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \ + (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \ + (5 << TIMING_CFG2_CPO_SHIFT)) + +#define CONFIG_SYS_DDR_TIMING_3 0x00000000 + +#define CONFIG_SYS_KMBEC_FPGA_BASE 0xE8000000 +#define CONFIG_SYS_KMBEC_FPGA_SIZE 128 + +/* EEprom support */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 + +/* + * Local Bus Configuration & Clock Setup + */ +#define CONFIG_SYS_LCRR_DBYP 0x80000000 +#define CONFIG_SYS_LCRR_EADC 0x00010000 +#define CONFIG_SYS_LCRR_CLKDIV 0x00000002 + +#define CONFIG_SYS_LBC_LBCR 0x00000000 + +/* + * MMU Setup + */ +#define CONFIG_SYS_IBAT7L (0) +#define CONFIG_SYS_IBAT7U (0) +#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L +#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U + +#endif /* __CONFIG_KM8309_COMMON_H */ diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index 877d841..a9823d6 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -169,9 +169,15 @@ #define UEC_VERBOSE_DEBUG 1 #ifdef CONFIG_UEC_ETH1 +#if defined(CONFIG_MPC8309) +#define CONFIG_SYS_UEC1_UCC_NUM 2 /* UCC3 */ +#define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK12 +#else #define CONFIG_SYS_UEC1_UCC_NUM 3 /* UCC4 */ #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE /* not used in RMII Mode */ #define CONFIG_SYS_UEC1_TX_CLK QE_CLK17 +#endif #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 0 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII