diff mbox

[SH] PR 54760 - Add thread pointer built-ins and GBR displacement addressing

Message ID 1349473467.9306.222.camel@yam-132-YW-E178-FTW
State New
Headers show

Commit Message

Oleg Endo Oct. 5, 2012, 9:44 p.m. UTC 
On Fri, 2012-10-05 at 21:55 +0900, Kaz Kojima wrote:
> Oleg Endo <oleg.endo@t-online.de> wrote:
> > Do you mean something like the attached patch as a preparation step?
> > (checked with 'make all')
> 
> Yes.  The patch is OK with removing the first line of the ChangeLog
> entry for PR number.

Done.
The attached patch is the next step that adds the thread pointer
builtins.  The GBR address mode stuff will follow afterwards separately.
Tested on rev 192142 with 'make all' and
'make -k check-gcc RUNTESTFLAGS="sh.exp --target_board=sh-sim
\{-m2/-ml,-m2/-mb,-m2a/-mb,-m4/-ml,-m4/-mb,-m4a/-ml,-m4a/-mb}"'

Cheers,
Oleg


gcc/ChangeLog:

	PR target/54760
	* config/sh/sh.md (define_constants): Add UNSPECV_GBR.
	(get_thread_pointer, set_thread_pointer): New expanders.
	(load_gbr): Rename to store_gbr.  Remove GBR_REG use.
	(store_gbr): New insn.
	* config/sh/sh.c (prepare_move_operands): Use gen_store_gbr 
	instead of gen_load_gbr in TLS_MODEL_LOCAL_EXEC case.
	(sh1_builtin_p): New function.
	(signature_args): Add SH_BLTIN_VP.
	(bdesc): Add __builtin_thread_pointer and 
	__builtin_set_thread_pointer.

testsuite/ChangeLog:

	PR target/54760
	* gcc.target/sh/pr54760-1.c: New.

Comments

Kaz Kojima Oct. 6, 2012, 3:31 a.m. UTC | #1 
Oleg Endo <oleg.endo@t-online.de> wrote:
> The attached patch is the next step that adds the thread pointer
> builtins.  The GBR address mode stuff will follow afterwards separately.
> Tested on rev 192142 with 'make all' and
> 'make -k check-gcc RUNTESTFLAGS="sh.exp --target_board=sh-sim
> \{-m2/-ml,-m2/-mb,-m2a/-mb,-m4/-ml,-m4/-mb,-m4a/-ml,-m4a/-mb}"'

The patch is OK.

Regards,
	kaz
diff mbox

Patch

Index: gcc/testsuite/gcc.target/sh/pr54760-1.c
===================================================================
--- gcc/testsuite/gcc.target/sh/pr54760-1.c	(revision 0)
+++ gcc/testsuite/gcc.target/sh/pr54760-1.c	(revision 0)
@@ -0,0 +1,20 @@ 
+/* Check that the __builtin_thread_pointer and __builtin_set_thread_pointer
+   built-in functions result in gbr store / load instructions.  */
+/* { dg-do compile { target "sh*-*-*" } } */
+/* { dg-options "-O1" } */
+/* { dg-skip-if "" { "sh*-*-*" } { "-m5*"} { "" } }  */
+/* { dg-final { scan-assembler-times "ldc" 1 } } */
+/* { dg-final { scan-assembler-times "stc" 1 } } */
+/* { dg-final { scan-assembler-times "gbr" 2 } } */
+
+void*
+test00 (void)
+{
+  return __builtin_thread_pointer ();
+}
+
+void
+test01 (void* p)
+{
+  __builtin_set_thread_pointer (p);
+}
Index: gcc/config/sh/sh.md
===================================================================
--- gcc/config/sh/sh.md	(revision 192142)
+++ gcc/config/sh/sh.md	(working copy)
@@ -175,6 +175,7 @@ 
   (UNSPECV_WINDOW_END	10)
   (UNSPECV_CONST_END	11)
   (UNSPECV_EH_RETURN	12)
+  (UNSPECV_GBR		13)
 ])
 
 ;; -------------------------------------------------------------------------
@@ -10029,13 +10030,37 @@ 
   DONE;
 })
 
-(define_insn "load_gbr"
-  [(set (match_operand:SI 0 "register_operand" "=r") (reg:SI GBR_REG))
-   (use (reg:SI GBR_REG))]
+;;------------------------------------------------------------------------------
+;; Thread pointer getter and setter.
+;;
+;; On SH the thread pointer is kept in the GBR.
+;; These patterns are usually expanded from the respective built-in functions.
+(define_expand "get_thread_pointer"
+  [(set (match_operand:SI 0 "register_operand") (reg:SI GBR_REG))]
+  "TARGET_SH1")
+
+;; The store_gbr insn can also be used on !TARGET_SH1 for doing TLS accesses.
+(define_insn "store_gbr"
+  [(set (match_operand:SI 0 "register_operand" "=r") (reg:SI GBR_REG))]
   ""
   "stc	gbr,%0"
   [(set_attr "type" "tls_load")])
 
+(define_expand "set_thread_pointer"
+  [(set (reg:SI GBR_REG)
+	(unspec_volatile:SI [(match_operand:SI 0 "register_operand")]
+	 UNSPECV_GBR))]
+  "TARGET_SH1")
+
+(define_insn "load_gbr"
+  [(set (reg:SI GBR_REG)
+	(unspec_volatile:SI [(match_operand:SI 0 "register_operand" "r")]
+	 UNSPECV_GBR))]
+  "TARGET_SH1"
+  "ldc	%0,gbr"
+  [(set_attr "type" "move")])
+
+;;------------------------------------------------------------------------------
 ;; case instruction for switch statements.
 
 ;; Operand 0 is index
Index: gcc/config/sh/sh.c
===================================================================
--- gcc/config/sh/sh.c	(revision 192142)
+++ gcc/config/sh/sh.c	(working copy)
@@ -1887,7 +1887,7 @@ 
 
 	    case TLS_MODEL_LOCAL_EXEC:
 	      tmp2 = gen_reg_rtx (Pmode);
-	      emit_insn (gen_load_gbr (tmp2));
+	      emit_insn (gen_store_gbr (tmp2));
 	      tmp = gen_reg_rtx (Pmode);
 	      emit_insn (gen_symTPOFF2reg (tmp, op1));
 
@@ -11521,6 +11521,12 @@ 
   return TARGET_SHMEDIA;
 }
 
+static bool
+sh1_builtin_p (void)
+{
+  return TARGET_SH1;
+}
+
 /* describe number and signedness of arguments; arg[0] == result
    (1: unsigned, 2: signed, 4: don't care, 8: pointer 0: no argument */
 /* 9: 64-bit pointer, 10: 32-bit pointer */
@@ -11578,6 +11584,8 @@ 
   { 1, 1, 1, 1 },
 #define SH_BLTIN_PV 23
   { 0, 8 },
+#define SH_BLTIN_VP 24
+  { 8, 0 },
 };
 /* mcmv: operands considered unsigned.  */
 /* mmulsum_wq, msad_ubq: result considered unsigned long long.  */
@@ -11753,6 +11761,12 @@ 
     CODE_FOR_byterev,	"__builtin_sh_media_BYTEREV", SH_BLTIN_2, 0 },
   { shmedia_builtin_p,
     CODE_FOR_prefetch,	"__builtin_sh_media_PREFO", SH_BLTIN_PSSV, 0 },
+
+  { sh1_builtin_p,
+    CODE_FOR_get_thread_pointer, "__builtin_thread_pointer", SH_BLTIN_VP, 0 },
+  { sh1_builtin_p,
+    CODE_FOR_set_thread_pointer, "__builtin_set_thread_pointer",
+    SH_BLTIN_PV, 0 },
 };
 
 static void