| Submitter | Martyn Welch |
|---|---|
| Date | Sept. 29, 2008, 12:35 p.m. |
| Message ID | <20080929123515.26226.91402.stgit@ubuntu8041.localdomain> |
| Download | mbox | patch |
| Permalink | /patch/1888/ |
| State | Accepted |
| Commit | a969e76a7101bf5f3d369563df1ca1253dd6131b |
| Headers | show |
Comments
On Sep 29, 2008, at 7:35 AM, Martyn Welch wrote: > Support for the SBC610 VPX Single Board Computer from GE Fanuc > (PowerPC > MPC8641D). > > Fixup to correctly reconfigure USB, provided by an NEC uPD720101, > after > device is reset. This requires a set of chip specific registers in the > devices configuration space to be correctly written, enabling all > ports > and switching the device to use an external 48-MHz Oscillator. > > Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> > --- > > arch/powerpc/platforms/86xx/gef_sbc610.c | 17 +++++++++++++++++ > 1 files changed, 17 insertions(+), 0 deletions(-) applied - k
Patch
diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index 3543a9e..605678c 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -12,6 +12,8 @@ * * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines) * Copyright 2006 Freescale Semiconductor Inc. + * + * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c */ #include <linux/stddef.h> @@ -83,6 +85,21 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m) seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } +static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); + + /* Ensure ports 1, 2, 3, 4 & 5 are enabled */ + pci_read_config_dword(pdev, 0xe0, &val); + pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x5); + + /* System clock is 48-MHz Oscillator and EHCI Enabled. */ + pci_write_config_dword(pdev, 0xe4, 1 << 5); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + gef_sbc610_nec_fixup); /* * Called very early, device-tree isn't unflattened
Support for the SBC610 VPX Single Board Computer from GE Fanuc (PowerPC MPC8641D). Fixup to correctly reconfigure USB, provided by an NEC uPD720101, after device is reset. This requires a set of chip specific registers in the devices configuration space to be correctly written, enabling all ports and switching the device to use an external 48-MHz Oscillator. Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com> --- arch/powerpc/platforms/86xx/gef_sbc610.c | 17 +++++++++++++++++ 1 files changed, 17 insertions(+), 0 deletions(-)