diff mbox

[U-Boot,4/7] Tegra30: Add arch-tegra30 include files

Message ID 1349217955-8729-5-git-send-email-twarren@nvidia.com
State Superseded
Delegated to: Tom Warren
Headers show

Commit Message

Tom Warren Oct. 2, 2012, 10:45 p.m. UTC
Common Tegra files are in arch-tegra, shared between T20 and T30.
Tegra30-specific headers are in arch-tegra30. Note that some of
these will be filled in as more T30 support is added (drivers,
WB/LP0 support, etc.).

Signed-off-by: Tom Warren <twarren@nvidia.com>
---
 arch/arm/include/asm/arch-tegra/clk_rst.h          |  148 +++++-
 arch/arm/include/asm/arch-tegra/clock.h            |    8 +-
 arch/arm/include/asm/arch-tegra/gp_padctrl.h       |   37 ++
 arch/arm/include/asm/arch-tegra/tegra.h            |   11 +-
 arch/arm/include/asm/arch-tegra20/gp_padctrl.h     |   17 +-
 arch/arm/include/asm/arch-tegra30/clock-tables.h   |  378 ++++++++++++
 arch/arm/include/asm/arch-tegra30/clock.h          |   24 +
 arch/arm/include/asm/arch-tegra30/emc.h            |  106 ++++
 arch/arm/include/asm/arch-tegra30/flow.h           |   35 ++
 arch/arm/include/asm/arch-tegra30/funcmux.h        |   47 ++
 arch/arm/include/asm/arch-tegra30/gp_padctrl.h     |   59 ++
 arch/arm/include/asm/arch-tegra30/gpio.h           |  304 ++++++++++
 arch/arm/include/asm/arch-tegra30/hardware.h       |   22 +
 .../asm/arch-tegra30/pinmux-config-common.h        |  339 +++++++++++
 arch/arm/include/asm/arch-tegra30/pinmux.h         |  603 ++++++++++++++++++++
 arch/arm/include/asm/arch-tegra30/pmu.h            |   23 +
 arch/arm/include/asm/arch-tegra30/tegra.h          |   26 +
 17 files changed, 2161 insertions(+), 26 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-tegra/gp_padctrl.h
 create mode 100644 arch/arm/include/asm/arch-tegra30/clock-tables.h
 create mode 100644 arch/arm/include/asm/arch-tegra30/clock.h
 create mode 100644 arch/arm/include/asm/arch-tegra30/emc.h
 create mode 100644 arch/arm/include/asm/arch-tegra30/flow.h
 create mode 100644 arch/arm/include/asm/arch-tegra30/funcmux.h
 create mode 100644 arch/arm/include/asm/arch-tegra30/gp_padctrl.h
 create mode 100644 arch/arm/include/asm/arch-tegra30/gpio.h
 create mode 100644 arch/arm/include/asm/arch-tegra30/hardware.h
 create mode 100644 arch/arm/include/asm/arch-tegra30/pinmux-config-common.h
 create mode 100644 arch/arm/include/asm/arch-tegra30/pinmux.h
 create mode 100644 arch/arm/include/asm/arch-tegra30/pmu.h
 create mode 100644 arch/arm/include/asm/arch-tegra30/tegra.h

Comments

Stephen Warren Oct. 3, 2012, 8:31 p.m. UTC | #1
On 10/02/2012 04:45 PM, Tom Warren wrote:
> Common Tegra files are in arch-tegra, shared between T20 and T30.
> Tegra30-specific headers are in arch-tegra30. Note that some of
> these will be filled in as more T30 support is added (drivers,
> WB/LP0 support, etc.).

> diff --git a/arch/arm/include/asm/arch-tegra/gp_padctrl.h b/arch/arm/include/asm/arch-tegra/gp_padctrl.h

> +/* bit fields definitions for APB_MISC_GP_HIDREV register */
> +#define HIDREV_CHIPID_SHIFT		8
> +#define HIDREV_CHIPID_MASK		(0xff << HIDREV_CHIPID_SHIFT)
> +#define HIDREV_MAJORPREV_SHIFT		4
> +#define HIDREV_MAJORPREV_MASK		(0xf << HIDREV_MAJORPREV_SHIFT)

Patch 1 added the following:

#define GP_HIDREV	0x804

... to arch/arm/cpu/arm720t/tegra-common/cpu.h. I wonder if that line
wouldn't be better place here, alongside the macros that allow you to
use it?

> diff --git a/arch/arm/include/asm/arch-tegra30/emc.h b/arch/arm/include/asm/arch-tegra30/emc.h

This file seems to be:

a) An exact duplicate of the Tegra20 file. Did the register layout
really not change at all? That seems unlikely. If so, shouldn't the file
be shared?

b) Not used by anything in this patch series, so shouldn't be needed.

c) Incorrect; struct emc_ctlr doesn't actually match the register layout
for Tegra20 or Tegra30 (at least, offset 0 is interrupt status in HW in
both chips, not cfg as in the struct). Some fields match though.

> diff --git a/arch/arm/include/asm/arch-tegra30/funcmux.h b/arch/arm/include/asm/arch-tegra30/funcmux.h

> +/**
> + * Select a config for a particular peripheral.
> + *
> + * Each peripheral can operate through a number of configurations,
> + * which are sets of pins that it uses to bring out its signals.
> + * The basic config is 0, and higher numbers indicate different
> + * pinmux settings to bring the peripheral out on other pins,
> + *
> + * This function also disables tristate for the function's pins,
> + * so that they operate in normal mode.
> + *
> + * @param id		Peripheral id
> + * @param config	Configuration to use (FUNCMUX_...), 0 for default
> + * @return 0 if ok, -1 on error (e.g. incorrect id or config)
> + */
> +int funcmux_select(enum periph_id id, int config);

That prototype is identical to Tegra20. Shouldn't there be a common
funcmux.h that defines the prototype, either include from the
SoC-specific file, or itself including the SoC-specific file? This is
important since common code (stuff that's not specific to Tegra20 or
Tegra30) calls this function, so it shouldn't be prototyped in multiple
places (with associated possibility of divergence) even if the
implementation is entirely separate for the two SoCs.

> diff --git a/arch/arm/include/asm/arch-tegra30/gpio.h b/arch/arm/include/asm/arch-tegra30/gpio.h

> + * The Tegra 3x GPIO controller has 246 GPIOS in 8 banks of 4 ports,
> + *  each with 8 GPIOs.

Extra space there after *.

> diff --git a/arch/arm/include/asm/arch-tegra30/hardware.h b/arch/arm/include/asm/arch-tegra30/hardware.h

This file is empty except for comments. Is it really useful? The Tegra20
file is empty too.

> diff --git a/arch/arm/include/asm/arch-tegra30/pinmux-config-common.h b/arch/arm/include/asm/arch-tegra30/pinmux-config-common.h

The content of this file presumably describes Cardhu (which revision?)
Surely it should be in board/nvidia/cardhu/*.c?

> diff --git a/arch/arm/include/asm/arch-tegra30/pinmux.h b/arch/arm/include/asm/arch-tegra30/pinmux.h

> +/*
> + * Functions which can be assigned to each of the pin groups. The values here
> + * bear no relation to the values programmed into pinmux registers and are
> + * purely a convenience. The translation is done through a table search.
> + */
> +enum pmux_func {
> +	PMUX_FUNC_RSVD = 0x8000,
> +	PMUX_FUNC_RSVD0 = PMUX_FUNC_RSVD,
> +	PMUX_FUNC_BAD = 0x4000,		/* Invalid! */
> +	PMUX_FUNC_NONE = 0,

I think all four of those should be deleted.

> +	PMUX_FUNC_I2C,
> +	PMUX_FUNC_I2C1 = PMUX_FUNC_I2C,

I don't think there's a need for duplicate names for any of these.
Tom Warren Oct. 3, 2012, 9:48 p.m. UTC | #2
Stephen,

On Wed, Oct 3, 2012 at 1:31 PM, Stephen Warren <swarren@wwwdotorg.org> wrote:
> On 10/02/2012 04:45 PM, Tom Warren wrote:
>> Common Tegra files are in arch-tegra, shared between T20 and T30.
>> Tegra30-specific headers are in arch-tegra30. Note that some of
>> these will be filled in as more T30 support is added (drivers,
>> WB/LP0 support, etc.).
>
>> diff --git a/arch/arm/include/asm/arch-tegra/gp_padctrl.h b/arch/arm/include/asm/arch-tegra/gp_padctrl.h
>
>> +/* bit fields definitions for APB_MISC_GP_HIDREV register */
>> +#define HIDREV_CHIPID_SHIFT          8
>> +#define HIDREV_CHIPID_MASK           (0xff << HIDREV_CHIPID_SHIFT)
>> +#define HIDREV_MAJORPREV_SHIFT               4
>> +#define HIDREV_MAJORPREV_MASK                (0xf << HIDREV_MAJORPREV_SHIFT)
>
> Patch 1 added the following:
>
> #define GP_HIDREV       0x804
>
> ... to arch/arm/cpu/arm720t/tegra-common/cpu.h. I wonder if that line
> wouldn't be better place here, alongside the macros that allow you to
> use it?

Sure, that would be better. The code that uses this in cpu.c was
munged a few times and I may have added this in the wrong file.

>
>> diff --git a/arch/arm/include/asm/arch-tegra30/emc.h b/arch/arm/include/asm/arch-tegra30/emc.h
>
> This file seems to be:
>
> a) An exact duplicate of the Tegra20 file. Did the register layout
> really not change at all? That seems unlikely. If so, shouldn't the file
> be shared?
>
> b) Not used by anything in this patch series, so shouldn't be needed.
>
> c) Incorrect; struct emc_ctlr doesn't actually match the register layout
> for Tegra20 or Tegra30 (at least, offset 0 is interrupt status in HW in
> both chips, not cfg as in the struct). Some fields match though.

I'll revisit it in our internal U-Boot source. I tried to go through
all the include files and make sure any not used on T30 initially were
removed, but if it's used in a common file, I didn't want to add #if
defined(CONFIG_TEGRA20) fencing if not necessary.

>
>> diff --git a/arch/arm/include/asm/arch-tegra30/funcmux.h b/arch/arm/include/asm/arch-tegra30/funcmux.h
>
>> +/**
>> + * Select a config for a particular peripheral.
>> + *
>> + * Each peripheral can operate through a number of configurations,
>> + * which are sets of pins that it uses to bring out its signals.
>> + * The basic config is 0, and higher numbers indicate different
>> + * pinmux settings to bring the peripheral out on other pins,
>> + *
>> + * This function also disables tristate for the function's pins,
>> + * so that they operate in normal mode.
>> + *
>> + * @param id         Peripheral id
>> + * @param config     Configuration to use (FUNCMUX_...), 0 for default
>> + * @return 0 if ok, -1 on error (e.g. incorrect id or config)
>> + */
>> +int funcmux_select(enum periph_id id, int config);
>
> That prototype is identical to Tegra20. Shouldn't there be a common
> funcmux.h that defines the prototype, either include from the
> SoC-specific file, or itself including the SoC-specific file? This is
> important since common code (stuff that's not specific to Tegra20 or
> Tegra30) calls this function, so it shouldn't be prototyped in multiple
> places (with associated possibility of divergence) even if the
> implementation is entirely separate for the two SoCs.

Yep, I can do that.
>
>> diff --git a/arch/arm/include/asm/arch-tegra30/gpio.h b/arch/arm/include/asm/arch-tegra30/gpio.h
>
>> + * The Tegra 3x GPIO controller has 246 GPIOS in 8 banks of 4 ports,
>> + *  each with 8 GPIOs.
>
> Extra space there after *.
>
>> diff --git a/arch/arm/include/asm/arch-tegra30/hardware.h b/arch/arm/include/asm/arch-tegra30/hardware.h
>
> This file is empty except for comments. Is it really useful? The Tegra20
> file is empty too

It's included from include/asm/hardware.h, which is included in 3 or
so arm720t files, so it's mandatory. I hate empty files, but I don't
see a way around it without polluting some arm720t files with
#ifdef's. the integratorap_cm720t does the same thing.

>
>> diff --git a/arch/arm/include/asm/arch-tegra30/pinmux-config-common.h b/arch/arm/include/asm/arch-tegra30/pinmux-config-common.h
>
> The content of this file presumably describes Cardhu (which revision?)
> Surely it should be in board/nvidia/cardhu/*.c?

On the previous review cycle (before I commonized Tegra files), this
file lived in board/nvidia/cardhu, and I think it was Tom Rini (or
maybe Simon) that pointed out that it had no 'cardhu' identifiers in
it, so it should be moved to a more Tegra30-centric area, hence the
move to arch-tegra30. Again, this is from our internal repo, and I
don't believe there's any rev info in that file (except for
commented-out tables that aren't used, so I removed them).  I think
it's valid to say this file is common to all Tegra30 builds, and
additional sparse pinmux tables could be added in board files/areas
for board-specific / rev-specific mux changes.
>
>> diff --git a/arch/arm/include/asm/arch-tegra30/pinmux.h b/arch/arm/include/asm/arch-tegra30/pinmux.h
>
>> +/*
>> + * Functions which can be assigned to each of the pin groups. The values here
>> + * bear no relation to the values programmed into pinmux registers and are
>> + * purely a convenience. The translation is done through a table search.
>> + */
>> +enum pmux_func {
>> +     PMUX_FUNC_RSVD = 0x8000,
>> +     PMUX_FUNC_RSVD0 = PMUX_FUNC_RSVD,
>> +     PMUX_FUNC_BAD = 0x4000,         /* Invalid! */
>> +     PMUX_FUNC_NONE = 0,
>
> I think all four of those should be deleted.

I'll look into it after the pinmux table rewrite you pointed out.

>
>> +     PMUX_FUNC_I2C,
>> +     PMUX_FUNC_I2C1 = PMUX_FUNC_I2C,
>
> I don't think there's a need for duplicate names for any of these.

I'll look into it.

Thanks,

Tom
Stephen Warren Oct. 3, 2012, 10:32 p.m. UTC | #3
On 10/03/2012 03:48 PM, Tom Warren wrote:
> Stephen,
> 
> On Wed, Oct 3, 2012 at 1:31 PM, Stephen Warren <swarren@wwwdotorg.org> wrote:
>> On 10/02/2012 04:45 PM, Tom Warren wrote:
>>> Common Tegra files are in arch-tegra, shared between T20 and T30.
>>> Tegra30-specific headers are in arch-tegra30. Note that some of
>>> these will be filled in as more T30 support is added (drivers,
>>> WB/LP0 support, etc.).
...
>>> diff --git a/arch/arm/include/asm/arch-tegra30/emc.h b/arch/arm/include/asm/arch-tegra30/emc.h
>>
>> This file seems to be:
>>
>> a) An exact duplicate of the Tegra20 file. Did the register layout
>> really not change at all? That seems unlikely. If so, shouldn't the file
>> be shared?
>>
>> b) Not used by anything in this patch series, so shouldn't be needed.
>>
>> c) Incorrect; struct emc_ctlr doesn't actually match the register layout
>> for Tegra20 or Tegra30 (at least, offset 0 is interrupt status in HW in
>> both chips, not cfg as in the struct). Some fields match though.
> 
> I'll revisit it in our internal U-Boot source. I tried to go through
> all the include files and make sure any not used on T30 initially were
> removed, but if it's used in a common file, I didn't want to add #if
> defined(CONFIG_TEGRA20) fencing if not necessary.

Hmm. I guess this should be conditional on something like
CONFIG_TEGRA_EMC irrespective of the new Tegra30 changes; I imagine any
EMC-related code is quite optional even on Tegra20 where there is a
driver coded up.

>>> diff --git a/arch/arm/include/asm/arch-tegra30/gpio.h b/arch/arm/include/asm/arch-tegra30/gpio.h
>>
>>> + * The Tegra 3x GPIO controller has 246 GPIOS in 8 banks of 4 ports,
>>> + *  each with 8 GPIOs.
>>
>> Extra space there after *.
>>
>>> diff --git a/arch/arm/include/asm/arch-tegra30/hardware.h b/arch/arm/include/asm/arch-tegra30/hardware.h
>>
>> This file is empty except for comments. Is it really useful? The Tegra20
>> file is empty too
> 
> It's included from include/asm/hardware.h, which is included in 3 or
> so arm720t files, so it's mandatory. I hate empty files, but I don't
> see a way around it without polluting some arm720t files with
> #ifdef's. the integratorap_cm720t does the same thing.

OK, makes sense.

>>> diff --git a/arch/arm/include/asm/arch-tegra30/pinmux-config-common.h b/arch/arm/include/asm/arch-tegra30/pinmux-config-common.h
>>
>> The content of this file presumably describes Cardhu (which revision?)
>> Surely it should be in board/nvidia/cardhu/*.c?
> 
> On the previous review cycle (before I commonized Tegra files), this
> file lived in board/nvidia/cardhu, and I think it was Tom Rini (or
> maybe Simon) that pointed out that it had no 'cardhu' identifiers in
> it, so it should be moved to a more Tegra30-centric area, hence the
> move to arch-tegra30. Again, this is from our internal repo, and I
> don't believe there's any rev info in that file (except for
> commented-out tables that aren't used, so I removed them).  I think
> it's valid to say this file is common to all Tegra30 builds, and
> additional sparse pinmux tables could be added in board files/areas
> for board-specific / rev-specific mux changes.

Sorry, there's no way those tables aren't Cardhu-specific; they're
picking specific pinmux options for all/many of the pins, and there's no
reason in general to believe that every Tegra30 board will use the exact
same pinmux setup.

In practice, I know that e.g. Waluigi and Beaver use a very similar
pinmux, but I imagine there are some differences even there. So, chunks
of the table could be re-used, but certainly not the whole thing. I
think the best way forward here is to put this current file into the
Cardhu directory, and then implement pinmux-from-device-tree before
adding support for any other boards that need a different pinmux.
diff mbox

Patch

diff --git a/arch/arm/include/asm/arch-tegra/clk_rst.h b/arch/arm/include/asm/arch-tegra/clk_rst.h
index 7b548c2..6a6e507 100644
--- a/arch/arm/include/asm/arch-tegra/clk_rst.h
+++ b/arch/arm/include/asm/arch-tegra/clk_rst.h
@@ -21,8 +21,8 @@ 
  * MA 02111-1307 USA
  */
 
-#ifndef _CLK_RST_H_
-#define _CLK_RST_H_
+#ifndef _TEGRA_CLK_RST_H_
+#define _TEGRA_CLK_RST_H_
 
 /* PLL registers - there are several PLLs in the clock controller */
 struct clk_pll {
@@ -37,6 +37,12 @@  struct clk_pll_simple {
 	uint pll_misc;		/* other misc things */
 };
 
+/* RST_DEV_(L,H,U,V,W)_(SET,CLR) and CLK_ENB_(L,H,U,V,W)_(SET,CLR) */
+struct clk_set_clr {
+	uint set;
+	uint clr;
+};
+
 /*
  * Most PLLs use the clk_pll structure, but some have a simpler two-member
  * structure for which we use clk_pll_simple. The reason for this non-
@@ -45,8 +51,10 @@  struct clk_pll_simple {
 enum {
 	TEGRA_CLK_PLLS		= 6,	/* Number of normal PLLs */
 	TEGRA_CLK_SIMPLE_PLLS	= 3,	/* Number of simple PLLs */
-	TEGRA_CLK_REGS		= 3,	/* Number of clock enable registers */
-	TEGRA_CLK_SOURCES	= 64,	/* Number of peripheral clock sources */
+	TEGRA_CLK_REGS		= 3,	/* Number of clock enable regs L/H/U */
+	TEGRA_CLK_SOURCES	= 64,	/* Number of ppl clock sources L/H/U */
+	TEGRA_CLK_REGS_VW	= 2,	/* Number of clock enable regs V/W */
+	TEGRA_CLK_SOURCES_VW	= 32,	/* Number of ppl clock sources V/W*/
 };
 
 /* Clock/Reset Controller (CLK_RST_CONTROLLER_) regs */
@@ -82,14 +90,53 @@  struct clk_rst_ctlr {
 	uint crc_reserved11;		/* _reserved_11,	0xFC */
 
 	uint crc_clk_src[TEGRA_CLK_SOURCES]; /*_I2S1_0...	0x100-1fc */
-	uint crc_reserved20[80];	/*			0x200-33C */
-	uint crc_cpu_cmplx_set;		/* _CPU_CMPLX_SET_0,	0x340	  */
-	uint crc_cpu_cmplx_clr;		/* _CPU_CMPLX_CLR_0,	0x344     */
+
+	uint crc_reserved20[64];	/* _reserved_20,	0x200-2fc */
+
+	/* _RST_DEV_L/H/U_SET_0 0x300 ~ 0x314 */
+	struct clk_set_clr crc_rst_dev_ex[TEGRA_CLK_REGS];
+
+	uint crc_reserved30[2];		/* _reserved_30,	0x318, 0x31c */
+
+	/* _CLK_ENB_L/H/U_CLR_0 0x320 ~ 0x334 */
+	struct clk_set_clr crc_clk_enb_ex[TEGRA_CLK_REGS];
+
+	uint crc_reserved31[2];		/* _reserved_31,	0x338, 0x33c */
+
+	uint crc_cpu_cmplx_set;		/* _RST_CPU_CMPLX_SET_0,    0x340 */
+	uint crc_cpu_cmplx_clr;		/* _RST_CPU_CMPLX_CLR_0,    0x344 */
+
+	/* Additional (T30) registers */
+	uint crc_clk_cpu_cmplx_set;	/* _CLK_CPU_CMPLX_SET_0,    0x348 */
+	uint crc_clk_cpu_cmplx_clr;	/* _CLK_CPU_CMPLX_SET_0,    0x34c */
+
+	uint crc_reserved32[2];		/* _reserved_32,      0x350,0x354 */
+
+	uint crc_rst_dev_vw[TEGRA_CLK_REGS_VW]; /* _RST_DEVICES_V/W_0 */
+	uint crc_clk_out_enb_vw[TEGRA_CLK_REGS_VW]; /* _CLK_OUT_ENB_V/W_0 */
+	uint crc_cclkg_brst_pol;	/* _CCLKG_BURST_POLICY_0,   0x368 */
+	uint crc_super_cclkg_div;	/* _SUPER_CCLKG_DIVIDER_0,  0x36C */
+	uint crc_cclklp_brst_pol;	/* _CCLKLP_BURST_POLICY_0,  0x370 */
+	uint crc_super_cclkp_div;	/* _SUPER_CCLKLP_DIVIDER_0, 0x374 */
+	uint crc_clk_cpug_cmplx;	/* _CLK_CPUG_CMPLX_0,       0x378 */
+	uint crc_clk_cpulp_cmplx;	/* _CLK_CPULP_CMPLX_0,      0x37C */
+	uint crc_cpu_softrst_ctrl;	/* _CPU_SOFTRST_CTRL_0,     0x380 */
+	uint crc_reserved33[11];	/* _reserved_33,        0x384-3ac */
+	uint crc_clk_src_vw[TEGRA_CLK_SOURCES_VW]; /* _G3D2_0..., 0x3b0-0x42c */
+	/* _RST_DEV_V/W_SET_0 0x430 ~ 0x43c */
+	struct clk_set_clr crc_rst_dev_ex_vw[TEGRA_CLK_REGS_VW];
+	/* _CLK_ENB_V/W_CLR_0 0x440 ~ 0x44c */
+	struct clk_set_clr crc_clk_enb_ex_vw[TEGRA_CLK_REGS_VW];
+	uint crc_reserved40[12];	/* _reserved_40,	0x450-47C */
+	uint crc_pll_cfg0;		/* _PLL_CFG0_0,		0x480 */
+	uint crc_pll_cfg1;		/* _PLL_CFG1_0,		0x484 */
+	uint crc_pll_cfg2;		/* _PLL_CFG2_0,		0x488 */
 };
 
 /* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */
+#define CPU3_CLK_STP_SHIFT	11
+#define CPU2_CLK_STP_SHIFT	10
 #define CPU1_CLK_STP_SHIFT	9
-
 #define CPU0_CLK_STP_SHIFT	8
 #define CPU0_CLK_STP_MASK	(1U << CPU0_CLK_STP_SHIFT)
 
@@ -120,6 +167,12 @@  struct clk_rst_ctlr {
 #define PLL_OUT_RATIO_MASK	(0xffU << PLL_OUT_RATIO_SHIFT)
 
 /* CLK_RST_CONTROLLER_PLLx_MISC_0 */
+#define PLL_DCCON_SHIFT		20
+#define PLL_DCCON_MASK		(1U << PLL_DCCON_SHIFT)
+
+#define PLL_LOCK_ENABLE_SHIFT	18
+#define PLL_LOCK_ENABLE_MASK	(1U << PLL_LOCK_ENABLE_SHIFT)
+
 #define PLL_CPCON_SHIFT		8
 #define PLL_CPCON_MASK		(15U << PLL_CPCON_SHIFT)
 
@@ -129,6 +182,22 @@  struct clk_rst_ctlr {
 #define PLLU_VCO_FREQ_SHIFT	20
 #define PLLU_VCO_FREQ_MASK	(1U << PLLU_VCO_FREQ_SHIFT)
 
+#define PLLP_OUT1_OVR		(1 << 2)
+#define PLLP_OUT2_OVR		(1 << 18)
+#define PLLP_OUT3_OVR		(1 << 2)
+#define PLLP_OUT4_OVR		(1 << 18)
+#define PLLP_OUT1_RATIO		8
+#define PLLP_OUT2_RATIO		24
+#define PLLP_OUT3_RATIO		8
+#define PLLP_OUT4_RATIO		24
+
+enum {
+	IN_408_OUT_204_DIVISOR = 2,
+	IN_408_OUT_102_DIVISOR = 6,
+	IN_408_OUT_48_DIVISOR = 15,
+	IN_408_OUT_9_6_DIVISOR = 83,
+};
+
 /* CLK_RST_CONTROLLER_OSC_CTRL_0 */
 #define OSC_FREQ_SHIFT		30
 #define OSC_FREQ_MASK		(3U << OSC_FREQ_SHIFT)
@@ -151,4 +220,65 @@  struct clk_rst_ctlr {
 #define OUT_CLK_SOURCE4_SHIFT	28
 #define OUT_CLK_SOURCE4_MASK	(15U << OUT_CLK_SOURCE4_SHIFT)
 
-#endif	/* CLK_RST_H */
+/* CLK_RST_CONTROLLER_SCLK_BURST_POLICY */
+#define SCLK_SYS_STATE_SHIFT    28U
+#define SCLK_SYS_STATE_MASK     (15U << SCLK_SYS_STATE_SHIFT)
+enum {
+	SCLK_SYS_STATE_STDBY,
+	SCLK_SYS_STATE_IDLE,
+	SCLK_SYS_STATE_RUN,
+	SCLK_SYS_STATE_IRQ = 4U,
+	SCLK_SYS_STATE_FIQ = 8U,
+};
+#define SCLK_COP_FIQ_MASK       (1 << 27)
+#define SCLK_CPU_FIQ_MASK       (1 << 26)
+#define SCLK_COP_IRQ_MASK       (1 << 25)
+#define SCLK_CPU_IRQ_MASK       (1 << 24)
+
+#define SCLK_SWAKEUP_FIQ_SOURCE_SHIFT		12
+#define SCLK_SWAKEUP_FIQ_SOURCE_MASK		\
+		(7 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT)
+#define SCLK_SWAKEUP_IRQ_SOURCE_SHIFT		8
+#define SCLK_SWAKEUP_IRQ_SOURCE_MASK		\
+		(7 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT)
+#define SCLK_SWAKEUP_RUN_SOURCE_SHIFT		4
+#define SCLK_SWAKEUP_RUN_SOURCE_MASK		\
+		(7 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT)
+#define SCLK_SWAKEUP_IDLE_SOURCE_SHIFT		0
+
+#define SCLK_SWAKEUP_IDLE_SOURCE_MASK		\
+		(7 << SCLK_SWAKEUP_FIQ_SOURCE_SHIFT)
+enum {
+	SCLK_SOURCE_CLKM,
+	SCLK_SOURCE_PLLC_OUT1,
+	SCLK_SOURCE_PLLP_OUT4,
+	SCLK_SOURCE_PLLP_OUT3,
+	SCLK_SOURCE_PLLP_OUT2,
+	SCLK_SOURCE_CLKD,
+	SCLK_SOURCE_CLKS,
+	SCLK_SOURCE_PLLM_OUT1,
+};
+#define SCLK_SWAKE_FIQ_SRC_PLLM_OUT1    (7 << 12)
+#define SCLK_SWAKE_IRQ_SRC_PLLM_OUT1    (7 << 8)
+#define SCLK_SWAKE_RUN_SRC_PLLM_OUT1    (7 << 4)
+#define SCLK_SWAKE_IDLE_SRC_PLLM_OUT1   (7 << 0)
+
+/* CLK_RST_CONTROLLER_SUPER_SCLK_DIVIDER */
+#define SUPER_SCLK_ENB_SHIFT		31U
+#define SUPER_SCLK_ENB_MASK		(1U << 31)
+#define SUPER_SCLK_DIVIDEND_SHIFT	8
+#define SUPER_SCLK_DIVIDEND_MASK	(0xff << SUPER_SCLK_DIVIDEND_SHIFT)
+#define SUPER_SCLK_DIVISOR_SHIFT	0
+#define SUPER_SCLK_DIVISOR_MASK		(0xff << SUPER_SCLK_DIVISOR_SHIFT)
+
+/* CLK_RST_CONTROLLER_CLK_SYSTEM_RATE */
+#define CLK_SYS_RATE_HCLK_DISABLE_SHIFT 7
+#define CLK_SYS_RATE_HCLK_DISABLE_MASK  (1 << CLK_SYS_RATE_HCLK_DISABLE_SHIFT)
+#define CLK_SYS_RATE_AHB_RATE_SHIFT     4
+#define CLK_SYS_RATE_AHB_RATE_MASK      (3 << CLK_SYS_RATE_AHB_RATE_SHIFT)
+#define CLK_SYS_RATE_PCLK_DISABLE_SHIFT 3
+#define CLK_SYS_RATE_PCLK_DISABLE_MASK  (1 << CLK_SYS_RATE_PCLK_DISABLE_SHIFT)
+#define CLK_SYS_RATE_APB_RATE_SHIFT     0
+#define CLK_SYS_RATE_APB_RATE_MASK      (3 << CLK_SYS_RATE_AHB_RATE_SHIFT)
+
+#endif	/* _TEGRA_CLK_RST_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/clock.h b/arch/arm/include/asm/arch-tegra/clock.h
index eac1dc2..01f86ab 100644
--- a/arch/arm/include/asm/arch-tegra/clock.h
+++ b/arch/arm/include/asm/arch-tegra/clock.h
@@ -21,8 +21,8 @@ 
 
 /* Tegra clock control functions */
 
-#ifndef _CLOCK_H
-#define _CLOCK_H
+#ifndef _TEGRA_CLOCK_H_
+#define _TEGRA_CLOCK_H_
 
 /* Set of oscillator frequencies supported in the internal API. */
 enum clock_osc_freq {
@@ -136,7 +136,7 @@  enum crc_reset_id {
 /**
  * Put parts of the CPU complex into or out of reset.\
  *
- * @param cpu		cpu number (0 or 1 on Tegra2)
+ * @param cpu		cpu number (0 or 1 on Tegra2, 0-3 on Tegra3)
  * @param which		which parts of the complex to affect (OR of crc_reset_id)
  * @param reset		1 to assert reset, 0 to de-assert
  */
@@ -262,4 +262,4 @@  void clock_init(void);
 /* Initialize the PLLs */
 void clock_early_init(void);
 
-#endif	/* _CLOCK_H_ */
+#endif	/* _TEGRA_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/gp_padctrl.h b/arch/arm/include/asm/arch-tegra/gp_padctrl.h
new file mode 100644
index 0000000..d347e97
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra/gp_padctrl.h
@@ -0,0 +1,37 @@ 
+/*
+ *  (C) Copyright 2010-2012
+ *  NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA_GP_PADCTRL_H_
+#define _TEGRA_GP_PADCTRL_H_
+
+/* bit fields definitions for APB_MISC_GP_HIDREV register */
+#define HIDREV_CHIPID_SHIFT		8
+#define HIDREV_CHIPID_MASK		(0xff << HIDREV_CHIPID_SHIFT)
+#define HIDREV_MAJORPREV_SHIFT		4
+#define HIDREV_MAJORPREV_MASK		(0xf << HIDREV_MAJORPREV_SHIFT)
+
+/* CHIPID field returned from APB_MISC_GP_HIDREV register */
+#define CHIPID_TEGRA20				0x20
+#define CHIPID_TEGRA30				0x30
+
+#endif	/* _TEGRA_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra/tegra.h b/arch/arm/include/asm/arch-tegra/tegra.h
index 6d2e62f..405abd8 100644
--- a/arch/arm/include/asm/arch-tegra/tegra.h
+++ b/arch/arm/include/asm/arch-tegra/tegra.h
@@ -72,12 +72,21 @@  enum {
 	SKU_ID_T25		= 0x18,
 	SKU_ID_AP25E		= 0x1b,
 	SKU_ID_T25E		= 0x1c,
+	SKU_ID_T30		= 0x81, /* Cardhu value */
 };
 
-/* These are the SOC categories that affect clocking */
+/*
+ * These are used to distinguish SOC types for setting up clocks. Mostly
+ * we can tell the clocking required by looking at the SOC sku_id, but
+ * for T30 it is a user option as to whether to run PLLP in fast or slow
+ * mode, so we have two options there.
+ */
 enum {
 	TEGRA_SOC_T20,
 	TEGRA_SOC_T25,
+	TEGRA_SOC_T30,
+	TEGRA_SOC_T30_408MHZ,   /* A T30 with faster PLLP */
+	TEGRA_SOC2_SLOW,	/* T2x needs to run at slow clock initially */
 
 	TEGRA_SOC_COUNT,
 	TEGRA_SOC_UNKNOWN	= -1,
diff --git a/arch/arm/include/asm/arch-tegra20/gp_padctrl.h b/arch/arm/include/asm/arch-tegra20/gp_padctrl.h
index 865af5b..eaaf903 100644
--- a/arch/arm/include/asm/arch-tegra20/gp_padctrl.h
+++ b/arch/arm/include/asm/arch-tegra20/gp_padctrl.h
@@ -21,8 +21,10 @@ 
  * MA 02111-1307 USA
  */
 
-#ifndef _GP_PADCTRL_H_
-#define _GP_PADCTRL_H_
+#ifndef _TEGRA20_GP_PADCTRL_H_
+#define _TEGRA20_GP_PADCTRL_H_
+
+#include <asm/arch-tegra/gp_padctrl.h>
 
 /* APB_MISC_GP and padctrl registers */
 struct apb_misc_gp_ctlr {
@@ -61,13 +63,4 @@  struct apb_misc_gp_ctlr {
 	u32	memcomp;	/* 0xD4: APB_MISC_GP_MEMCOMPPADCTRL */
 };
 
-/* bit fields definitions for APB_MISC_GP_HIDREV register */
-#define HIDREV_CHIPID_SHIFT		8
-#define HIDREV_CHIPID_MASK		(0xff << HIDREV_CHIPID_SHIFT)
-#define HIDREV_MAJORPREV_SHIFT		4
-#define HIDREV_MAJORPREV_MASK		(0xf << HIDREV_MAJORPREV_SHIFT)
-
-/* CHIPID field returned from APB_MISC_GP_HIDREV register */
-#define CHIPID_TEGRA20				0x20
-
-#endif
+#endif	/* _TEGRA20_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/clock-tables.h b/arch/arm/include/asm/arch-tegra30/clock-tables.h
new file mode 100644
index 0000000..b55e09d
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/clock-tables.h
@@ -0,0 +1,378 @@ 
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra30 clock PLL tables */
+
+#ifndef _TEGRA30_CLOCK_TABLES_H_
+#define _TEGRA30_CLOCK_TABLES_H_
+
+/* The PLLs supported by the hardware */
+enum clock_id {
+	CLOCK_ID_FIRST,
+	CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
+	CLOCK_ID_MEMORY,
+	CLOCK_ID_PERIPH,
+	CLOCK_ID_AUDIO,
+	CLOCK_ID_USB,
+	CLOCK_ID_DISPLAY,
+
+	/* now the simple ones */
+	CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
+	CLOCK_ID_EPCI,
+	CLOCK_ID_SFROM32KHZ,
+
+	/* These are the base clocks (inputs to the Tegra SOC) */
+	CLOCK_ID_32KHZ,
+	CLOCK_ID_OSC,
+
+	CLOCK_ID_COUNT,	/* number of PLLs */
+	CLOCK_ID_DISPLAY2,	/* Tegra3, placeholder */
+	CLOCK_ID_NONE = -1,
+};
+
+/* The clocks supported by the hardware */
+enum periph_id {
+	PERIPH_ID_FIRST,
+
+	/* Low word: 31:0 */
+	PERIPH_ID_CPU = PERIPH_ID_FIRST,
+	PERIPH_ID_COP,
+	PERIPH_ID_TRIGSYS,
+	PERIPH_ID_RESERVED3,
+	PERIPH_ID_RESERVED4,
+	PERIPH_ID_TMR,
+	PERIPH_ID_UART1,
+	PERIPH_ID_UART2,
+
+	/* 8 */
+	PERIPH_ID_GPIO,
+	PERIPH_ID_SDMMC2,
+	PERIPH_ID_SPDIF,
+	PERIPH_ID_I2S1,
+	PERIPH_ID_I2C1,
+	PERIPH_ID_NDFLASH,
+	PERIPH_ID_SDMMC1,
+	PERIPH_ID_SDMMC4,
+
+	/* 16 */
+	PERIPH_ID_RESERVED16,
+	PERIPH_ID_PWM,
+	PERIPH_ID_I2S2,
+	PERIPH_ID_EPP,
+	PERIPH_ID_VI,
+	PERIPH_ID_2D,
+	PERIPH_ID_USBD,
+	PERIPH_ID_ISP,
+
+	/* 24 */
+	PERIPH_ID_3D,
+	PERIPH_ID_RESERVED24,
+	PERIPH_ID_DISP2,
+	PERIPH_ID_DISP1,
+	PERIPH_ID_HOST1X,
+	PERIPH_ID_VCP,
+	PERIPH_ID_I2S0,
+	PERIPH_ID_CACHE2,
+
+	/* Middle word: 63:32 */
+	PERIPH_ID_MEM,
+	PERIPH_ID_AHBDMA,
+	PERIPH_ID_APBDMA,
+	PERIPH_ID_RESERVED35,
+	PERIPH_ID_KBC,
+	PERIPH_ID_STAT_MON,
+	PERIPH_ID_PMC,
+	PERIPH_ID_FUSE,
+
+	/* 40 */
+	PERIPH_ID_KFUSE,
+	PERIPH_ID_SBC1,
+	PERIPH_ID_SNOR,
+	PERIPH_ID_RESERVED43,
+	PERIPH_ID_SBC2,
+	PERIPH_ID_RESERVED45,
+	PERIPH_ID_SBC3,
+	PERIPH_ID_DVC_I2C,
+
+	/* 48 */
+	PERIPH_ID_DSI,
+	PERIPH_ID_TVO,
+	PERIPH_ID_MIPI,
+	PERIPH_ID_HDMI,
+	PERIPH_ID_CSI,
+	PERIPH_ID_TVDAC,
+	PERIPH_ID_I2C2,
+	PERIPH_ID_UART3,
+
+	/* 56 */
+	PERIPH_ID_RESERVED56,
+	PERIPH_ID_EMC,
+	PERIPH_ID_USB2,
+	PERIPH_ID_USB3,
+	PERIPH_ID_MPE,
+	PERIPH_ID_VDE,
+	PERIPH_ID_BSEA,
+	PERIPH_ID_BSEV,
+
+	/* Upper word 95:64 */
+	PERIPH_ID_SPEEDO,
+	PERIPH_ID_UART4,
+	PERIPH_ID_UART5,
+	PERIPH_ID_I2C3,
+	PERIPH_ID_SBC4,
+	PERIPH_ID_SDMMC3,
+	PERIPH_ID_PCIE,
+	PERIPH_ID_OWR,
+
+	/* 72 */
+	PERIPH_ID_AFI,
+	PERIPH_ID_CORESIGHT,
+	PERIPH_ID_PCIEXCLK,
+	PERIPH_ID_AVPUCQ,
+	PERIPH_ID_RESERVED76,
+	PERIPH_ID_RESERVED77,
+	PERIPH_ID_RESERVED78,
+	PERIPH_ID_DTV,
+
+	/* 80 */
+	PERIPH_ID_NANDSPEED,
+	PERIPH_ID_I2CSLOW,
+	PERIPH_ID_DSIB,
+	PERIPH_ID_RESERVED83,
+	PERIPH_ID_IRAMA,
+	PERIPH_ID_IRAMB,
+	PERIPH_ID_IRAMC,
+	PERIPH_ID_IRAMD,
+
+	/* 88 */
+	PERIPH_ID_CRAM2,
+	PERIPH_ID_RESERVED89,
+	PERIPH_ID_MDOUBLER,
+	PERIPH_ID_RESERVED91,
+	PERIPH_ID_SUSOUT,
+	PERIPH_ID_RESERVED93,
+	PERIPH_ID_RESERVED94,
+	PERIPH_ID_RESERVED95,
+
+	PERIPH_ID_VW_FIRST,
+	/* V word: 31:0 */
+	PERIPH_ID_CPUG = PERIPH_ID_VW_FIRST,
+	PERIPH_ID_CPULP,
+	PERIPH_ID_3D2,
+	PERIPH_ID_MSELECT,
+	PERIPH_ID_TSENSOR,
+	PERIPH_ID_I2S3,
+	PERIPH_ID_I2S4,
+	PERIPH_ID_I2C4,
+
+	/* 08 */
+	PERIPH_ID_SBC5,
+	PERIPH_ID_SBC6,
+	PERIPH_ID_AUDIO,
+	PERIPH_ID_APBIF,
+	PERIPH_ID_DAM0,
+	PERIPH_ID_DAM1,
+	PERIPH_ID_DAM2,
+	PERIPH_ID_HDA2CODEC2X,
+
+	/* 16 */
+	PERIPH_ID_ATOMICS,
+	PERIPH_ID_EX_RESERVED17,
+	PERIPH_ID_EX_RESERVED18,
+	PERIPH_ID_EX_RESERVED19,
+	PERIPH_ID_EX_RESERVED20,
+	PERIPH_ID_EX_RESERVED21,
+	PERIPH_ID_EX_RESERVED22,
+	PERIPH_ID_ACTMON,
+
+	/* 24 */
+	PERIPH_ID_EX_RESERVED24,
+	PERIPH_ID_EX_RESERVED25,
+	PERIPH_ID_EX_RESERVED26,
+	PERIPH_ID_EX_RESERVED27,
+	PERIPH_ID_SATA,
+	PERIPH_ID_HDA,
+	PERIPH_ID_EX_RESERVED30,
+	PERIPH_ID_EX_RESERVED31,
+
+	/* W word: 31:0 */
+	PERIPH_ID_HDA2HDMICODEC,
+	PERIPH_ID_SATACOLD,
+	PERIPH_ID_RESERVED0_PCIERX0,
+	PERIPH_ID_RESERVED1_PCIERX1,
+	PERIPH_ID_RESERVED2_PCIERX2,
+	PERIPH_ID_RESERVED3_PCIERX3,
+	PERIPH_ID_RESERVED4_PCIERX4,
+	PERIPH_ID_RESERVED5_PCIERX5,
+
+	/* 40 */
+	PERIPH_ID_CEC,
+	PERIPH_ID_RESERVED6_PCIE2,
+	PERIPH_ID_RESERVED7_EMC,
+	PERIPH_ID_RESERVED8_HDMI,
+	PERIPH_ID_RESERVED9_SATA,
+	PERIPH_ID_RESERVED10_MIPI,
+	PERIPH_ID_EX_RESERVED46,
+	PERIPH_ID_EX_RESERVED47,
+
+	PERIPH_ID_COUNT,
+	PERIPH_ID_NONE = -1,
+};
+
+enum pll_out_id {
+	PLL_OUT1,
+	PLL_OUT2,
+	PLL_OUT3,
+	PLL_OUT4
+};
+
+/*
+ * Clock peripheral IDs which sadly don't match up with PERIPH_ID. we want
+ * callers to use the PERIPH_ID for all access to peripheral clocks to avoid
+ * confusion bewteen PERIPH_ID_... and PERIPHC_...
+ *
+ * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
+ * confusing.
+ */
+enum periphc_internal_id {
+	/* 0x00 */
+	PERIPHC_I2S1,
+	PERIPHC_I2S2,
+	PERIPHC_SPDIF_OUT,
+	PERIPHC_SPDIF_IN,
+	PERIPHC_PWM,
+	PERIPHC_05h,
+	PERIPHC_SBC2,
+	PERIPHC_SBC3,
+
+	/* 0x08 */
+	PERIPHC_08h,
+	PERIPHC_I2C1,
+	PERIPHC_DVC_I2C,
+	PERIPHC_0bh,
+	PERIPHC_0ch,
+	PERIPHC_SBC1,
+	PERIPHC_DISP1,
+	PERIPHC_DISP2,
+
+	/* 0x10 */
+	PERIPHC_CVE,
+	PERIPHC_11h,
+	PERIPHC_VI,
+	PERIPHC_13h,
+	PERIPHC_SDMMC1,
+	PERIPHC_SDMMC2,
+	PERIPHC_G3D,
+	PERIPHC_G2D,
+
+	/* 0x18 */
+	PERIPHC_NDFLASH,
+	PERIPHC_SDMMC4,
+	PERIPHC_VFIR,
+	PERIPHC_EPP,
+	PERIPHC_MPE,
+	PERIPHC_MIPI,
+	PERIPHC_UART1,
+	PERIPHC_UART2,
+
+	/* 0x20 */
+	PERIPHC_HOST1X,
+	PERIPHC_21h,
+	PERIPHC_TVO,
+	PERIPHC_HDMI,
+	PERIPHC_24h,
+	PERIPHC_TVDAC,
+	PERIPHC_I2C2,
+	PERIPHC_EMC,
+
+	/* 0x28 */
+	PERIPHC_UART3,
+	PERIPHC_29h,
+	PERIPHC_VI_SENSOR,
+	PERIPHC_2bh,
+	PERIPHC_2ch,
+	PERIPHC_SBC4,
+	PERIPHC_I2C3,
+	PERIPHC_SDMMC3,
+
+	/* 0x30 */
+	PERIPHC_UART4,
+	PERIPHC_UART5,
+	PERIPHC_VDE,
+	PERIPHC_OWR,
+	PERIPHC_NOR,
+	PERIPHC_CSITE,
+	PERIPHC_I2S0,
+	PERIPHC_37h,
+
+	PERIPHC_VW_FIRST,
+	/* 0x38 */
+	PERIPHC_G3D2 = PERIPHC_VW_FIRST,
+	PERIPHC_MSELECT,
+	PERIPHC_TSENSOR,
+	PERIPHC_I2S3,
+	PERIPHC_I2S4,
+	PERIPHC_I2C4,
+	PERIPHC_SBC5,
+	PERIPHC_SBC6,
+
+	/* 0x40 */
+	PERIPHC_AUDIO,
+	PERIPHC_41h,
+	PERIPHC_DAM0,
+	PERIPHC_DAM1,
+	PERIPHC_DAM2,
+	PERIPHC_HDA2CODEC2X,
+	PERIPHC_ACTMON,
+	PERIPHC_EXTPERIPH1,
+
+	/* 0x48 */
+	PERIPHC_EXTPERIPH2,
+	PERIPHC_EXTPERIPH3,
+	PERIPHC_NANDSPEED,
+	PERIPHC_I2CSLOW,
+	PERIPHC_SYS,
+	PERIPHC_SPEEDO,
+	PERIPHC_4eh,
+	PERIPHC_4fh,
+
+	/* 0x50 */
+	PERIPHC_SATAOOB,
+	PERIPHC_SATA,
+	PERIPHC_HDA,
+
+	PERIPHC_COUNT,
+
+	PERIPHC_NONE = -1,
+};
+
+/* Converts a clock number to a clock register: 0=L, 1=H, 2=U, 0=V, 1=W */
+#define PERIPH_REG(id) \
+	(id < PERIPH_ID_VW_FIRST) ? \
+		((id) >> 5) : ((id - PERIPH_ID_VW_FIRST) >> 5)
+
+/* Mask value for a clock (within PERIPH_REG(id)) */
+#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
+
+/* return 1 if a PLL ID is in range */
+#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT)
+
+/* return 1 if a peripheral ID is in range */
+#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \
+		(id) < PERIPH_ID_COUNT)
+
+#endif	/* _TEGRA30_CLOCK_TABLES_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/clock.h b/arch/arm/include/asm/arch-tegra30/clock.h
new file mode 100644
index 0000000..61fc4c8
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/clock.h
@@ -0,0 +1,24 @@ 
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra30 clock control functions */
+
+#ifndef _TEGRA30_CLOCK_H_
+#define _TEGRA30_CLOCK_H_
+
+#include <asm/arch-tegra/clock.h>
+
+#endif	/* _TEGRA30_CLOCK_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/emc.h b/arch/arm/include/asm/arch-tegra30/emc.h
new file mode 100644
index 0000000..16b9ae0
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/emc.h
@@ -0,0 +1,106 @@ 
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA30_EMC_H_
+#define _TEGRA30_EMC_H_
+
+#include <asm/types.h>
+
+#define TEGRA_EMC_NUM_REGS	46
+
+/* EMC Registers */
+struct emc_ctlr {
+	u32 cfg;		/* 0x00: EMC_CFG */
+	u32 reserved0[3];	/* 0x04 ~ 0x0C */
+	u32 adr_cfg;		/* 0x10: EMC_ADR_CFG */
+	u32 adr_cfg1;		/* 0x14: EMC_ADR_CFG_1 */
+	u32 reserved1[2];	/* 0x18 ~ 0x18 */
+	u32 refresh_ctrl;	/* 0x20: EMC_REFCTRL */
+	u32 pin;		/* 0x24: EMC_PIN */
+	u32 timing_ctrl;	/* 0x28: EMC_TIMING_CONTROL */
+	u32 rc;			/* 0x2C: EMC_RC */
+	u32 rfc;		/* 0x30: EMC_RFC */
+	u32 ras;		/* 0x34: EMC_RAS */
+	u32 rp;			/* 0x38: EMC_RP */
+	u32 r2w;		/* 0x3C: EMC_R2W */
+	u32 w2r;		/* 0x40: EMC_W2R */
+	u32 r2p;		/* 0x44: EMC_R2P */
+	u32 w2p;		/* 0x48: EMC_W2P */
+	u32 rd_rcd;		/* 0x4C: EMC_RD_RCD */
+	u32 wd_rcd;		/* 0x50: EMC_WD_RCD */
+	u32 rrd;		/* 0x54: EMC_RRD */
+	u32 rext;		/* 0x58: EMC_REXT */
+	u32 wdv;		/* 0x5C: EMC_WDV */
+	u32 quse;		/* 0x60: EMC_QUSE */
+	u32 qrst;		/* 0x64: EMC_QRST */
+	u32 qsafe;		/* 0x68: EMC_QSAFE */
+	u32 rdv;		/* 0x6C: EMC_RDV */
+	u32 refresh;		/* 0x70: EMC_REFRESH */
+	u32 burst_refresh_num;	/* 0x74: EMC_BURST_REFRESH_NUM */
+	u32 pdex2wr;		/* 0x78: EMC_PDEX2WR */
+	u32 pdex2rd;		/* 0x7c: EMC_PDEX2RD */
+	u32 pchg2pden;		/* 0x80: EMC_PCHG2PDEN */
+	u32 act2pden;		/* 0x84: EMC_ACT2PDEN */
+	u32 ar2pden;		/* 0x88: EMC_AR2PDEN */
+	u32 rw2pden;		/* 0x8C: EMC_RW2PDEN */
+	u32 txsr;		/* 0x90: EMC_TXSR */
+	u32 tcke;		/* 0x94: EMC_TCKE */
+	u32 tfaw;		/* 0x98: EMC_TFAW */
+	u32 trpab;		/* 0x9C: EMC_TRPAB */
+	u32 tclkstable;		/* 0xA0: EMC_TCLKSTABLE */
+	u32 tclkstop;		/* 0xA4: EMC_TCLKSTOP */
+	u32 trefbw;		/* 0xA8: EMC_TREFBW */
+	u32 quse_extra;		/* 0xAC: EMC_QUSE_EXTRA */
+	u32 odt_write;		/* 0xB0: EMC_ODT_WRITE */
+	u32 odt_read;		/* 0xB4: EMC_ODT_READ */
+	u32 reserved2[5];	/* 0xB8 ~ 0xC8 */
+	u32 mrs;		/* 0xCC: EMC_MRS */
+	u32 emrs;		/* 0xD0: EMC_EMRS */
+	u32 ref;		/* 0xD4: EMC_REF */
+	u32 pre;		/* 0xD8: EMC_PRE */
+	u32 nop;		/* 0xDC: EMC_NOP */
+	u32 self_ref;		/* 0xE0: EMC_SELF_REF */
+	u32 dpd;		/* 0xE4: EMC_DPD */
+	u32 mrw;		/* 0xE8: EMC_MRW */
+	u32 mrr;		/* 0xEC: EMC_MRR */
+	u32 reserved3;		/* 0xF0: */
+	u32 fbio_cfg1;		/* 0xF4: EMC_FBIO_CFG1 */
+	u32 fbio_dqsib_dly;	/* 0xF8: EMC_FBIO_DQSIB_DLY */
+	u32 fbio_dqsib_dly_msb;	/* 0xFC: EMC_FBIO_DQSIB_DLY_MSG */
+	u32 fbio_spare;		/* 0x100: SBIO_SPARE */
+				/* There are more registers ... */
+};
+
+/**
+ * Set up the EMC for the given rate. The timing parameters are retrieved
+ * from the device tree "nvidia,tegra20-emc" node and its
+ * "nvidia,tegra20-emc-table" sub-nodes.
+ *
+ * @param blob	Device tree blob
+ * @param rate	Clock speed of memory controller in Hz (=2x memory bus rate)
+ * @return 0 if ok, else -ve error code (look in emc.c to decode it)
+ */
+int tegra_set_emc(const void *blob, unsigned rate);
+
+/**
+ * Get a pointer to the EMC controller from the device tree.
+ *
+ * @param blob	Device tree blob
+ * @return pointer to EMC controller
+ */
+struct emc_ctlr *emc_get_controller(const void *blob);
+
+#endif	/* _TEGRA30_EMC_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/flow.h b/arch/arm/include/asm/arch-tegra30/flow.h
new file mode 100644
index 0000000..f5966a8
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/flow.h
@@ -0,0 +1,35 @@ 
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA30_FLOW_H_
+#define _TEGRA30_FLOW_H_
+
+struct flow_ctlr {
+	u32 halt_cpu_events;
+	u32 halt_cop_events;
+	u32 cpu_csr;
+	u32 cop_csr;
+	u32 xrq_events;
+	u32 halt_cpu1_events;
+	u32 cpu1_csr;
+	u32 halt_cpu2_events;
+	u32 cpu2_csr;
+	u32 halt_cpu3_events;
+	u32 cpu3_csr;
+	u32 cluster_control;
+};
+
+#endif	/* _TEGRA30_FLOW_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/funcmux.h b/arch/arm/include/asm/arch-tegra30/funcmux.h
new file mode 100644
index 0000000..7a30c27
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/funcmux.h
@@ -0,0 +1,47 @@ 
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/* Tegra high-level function multiplexing */
+
+#ifndef _TEGRA30_FUNCMUX_H_
+#define _TEGRA30_FUNCMUX_H_
+
+/* Configs supported by the func mux */
+enum {
+	FUNCMUX_DEFAULT = 0,	/* default config */
+
+	/* UART configs */
+	FUNCMUX_UART1_ULPI = 0,
+};
+
+/**
+ * Select a config for a particular peripheral.
+ *
+ * Each peripheral can operate through a number of configurations,
+ * which are sets of pins that it uses to bring out its signals.
+ * The basic config is 0, and higher numbers indicate different
+ * pinmux settings to bring the peripheral out on other pins,
+ *
+ * This function also disables tristate for the function's pins,
+ * so that they operate in normal mode.
+ *
+ * @param id		Peripheral id
+ * @param config	Configuration to use (FUNCMUX_...), 0 for default
+ * @return 0 if ok, -1 on error (e.g. incorrect id or config)
+ */
+int funcmux_select(enum periph_id id, int config);
+
+#endif	/* _TEGRA30_FUNCMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/gp_padctrl.h b/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
new file mode 100644
index 0000000..9b383d0
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/gp_padctrl.h
@@ -0,0 +1,59 @@ 
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA30_GP_PADCTRL_H_
+#define _TEGRA30_GP_PADCTRL_H_
+
+#include <asm/arch-tegra/gp_padctrl.h>
+
+/* APB_MISC_GP and padctrl registers */
+struct apb_misc_gp_ctlr {
+	u32	modereg;	/* 0x00: APB_MISC_GP_MODEREG */
+	u32	hidrev;		/* 0x04: APB_MISC_GP_HIDREV */
+	u32	reserved0[22];	/* 0x08 - 0x5C: */
+	u32	emu_revid;	/* 0x60: APB_MISC_GP_EMU_REVID */
+	u32	xactor_scratch;	/* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
+	u32	aocfg1;		/* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
+	u32	aocfg2;		/* 0x6c: APB_MISC_GP_AOCFG2PADCTRL */
+	u32	atcfg1;		/* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
+	u32	atcfg2;		/* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
+	u32	atcfg3;		/* 0x78: APB_MISC_GP_ATCFG3PADCTRL */
+	u32	atcfg4;		/* 0x7C: APB_MISC_GP_ATCFG4PADCTRL */
+	u32	atcfg5;		/* 0x80: APB_MISC_GP_ATCFG5PADCTRL */
+	u32	cdev1cfg;	/* 0x84: APB_MISC_GP_CDEV1CFGPADCTRL */
+	u32	cdev2cfg;	/* 0x88: APB_MISC_GP_CDEV2CFGPADCTRL */
+	u32	csuscfg;	/* 0x8C: APB_MISC_GP_CSUSCFGPADCTRL */
+	u32	dap1cfg;	/* 0x90: APB_MISC_GP_DAP1CFGPADCTRL */
+	u32	dap2cfg;	/* 0x94: APB_MISC_GP_DAP2CFGPADCTRL */
+	u32	dap3cfg;	/* 0x98: APB_MISC_GP_DAP3CFGPADCTRL */
+	u32	dap4cfg;	/* 0x9C: APB_MISC_GP_DAP4CFGPADCTRL */
+	u32	dbgcfg;		/* 0xA0: APB_MISC_GP_DBGCFGPADCTRL */
+	u32	lcdcfg1;	/* 0xA4: APB_MISC_GP_LCDCFG1PADCTRL */
+	u32	lcdcfg2;	/* 0xA8: APB_MISC_GP_LCDCFG2PADCTRL */
+	u32	sdio2cfg;	/* 0xAC: APB_MISC_GP_SDIO2CFGPADCTRL */
+	u32	sdio3cfg;	/* 0xB0: APB_MISC_GP_SDIO3CFGPADCTRL */
+	u32	spicfg;		/* 0xB4: APB_MISC_GP_SPICFGPADCTRL */
+	u32	uaacfg;		/* 0xB8: APB_MISC_GP_UAACFGPADCTRL */
+	u32	uabcfg;		/* 0xBC: APB_MISC_GP_UABCFGPADCTRL */
+	u32	uart2cfg;	/* 0xC0: APB_MISC_GP_UART2CFGPADCTRL */
+	u32	uart3cfg;	/* 0xC4: APB_MISC_GP_UART3CFGPADCTRL */
+	u32	vicfg1;		/* 0xC8: APB_MISC_GP_VICFG1PADCTRL */
+	u32	vivttgen;	/* 0xCC: APB_MISC_GP_VIVTTGENPADCTRL */
+	u32	reserved1[7];	/* 0xD0-0xE8: */
+	u32	sdio1cfg;	/* 0xEC: APB_MISC_GP_SDIO1CFGPADCTRL */
+};
+
+#endif	/* _TEGRA30_GP_PADCTRL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/gpio.h b/arch/arm/include/asm/arch-tegra30/gpio.h
new file mode 100644
index 0000000..d0d16b4
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/gpio.h
@@ -0,0 +1,304 @@ 
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA30_GPIO_H_
+#define _TEGRA30_GPIO_H_
+
+/*
+ * The Tegra 3x GPIO controller has 246 GPIOS in 8 banks of 4 ports,
+ *  each with 8 GPIOs.
+ */
+#define TEGRA_GPIO_PORTS	4	/* number of ports per bank */
+#define TEGRA_GPIO_BANKS	8	/* number of banks */
+
+#include <asm/arch-tegra/gpio.h>
+
+/* GPIO Controller registers for a single bank */
+struct gpio_ctlr_bank {
+	uint gpio_config[TEGRA_GPIO_PORTS];
+	uint gpio_dir_out[TEGRA_GPIO_PORTS];
+	uint gpio_out[TEGRA_GPIO_PORTS];
+	uint gpio_in[TEGRA_GPIO_PORTS];
+	uint gpio_int_status[TEGRA_GPIO_PORTS];
+	uint gpio_int_enable[TEGRA_GPIO_PORTS];
+	uint gpio_int_level[TEGRA_GPIO_PORTS];
+	uint gpio_int_clear[TEGRA_GPIO_PORTS];
+	uint gpio_masked_config[TEGRA_GPIO_PORTS];
+	uint gpio_masked_dir_out[TEGRA_GPIO_PORTS];
+	uint gpio_masked_out[TEGRA_GPIO_PORTS];
+	uint gpio_masked_in[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_status[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_enable[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_level[TEGRA_GPIO_PORTS];
+	uint gpio_masked_int_clear[TEGRA_GPIO_PORTS];
+};
+
+struct gpio_ctlr {
+	struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
+};
+
+enum gpio_pin {
+	GPIO_PA0 = 0,	/* pin 0 */
+	GPIO_PA1,
+	GPIO_PA2,
+	GPIO_PA3,
+	GPIO_PA4,
+	GPIO_PA5,
+	GPIO_PA6,
+	GPIO_PA7,
+	GPIO_PB0,	/* pin 8 */
+	GPIO_PB1,
+	GPIO_PB2,
+	GPIO_PB3,
+	GPIO_PB4,
+	GPIO_PB5,
+	GPIO_PB6,
+	GPIO_PB7,
+	GPIO_PC0,	/* pin 16 */
+	GPIO_PC1,
+	GPIO_PC2,
+	GPIO_PC3,
+	GPIO_PC4,
+	GPIO_PC5,
+	GPIO_PC6,
+	GPIO_PC7,
+	GPIO_PD0,	/* pin 24 */
+	GPIO_PD1,
+	GPIO_PD2,
+	GPIO_PD3,
+	GPIO_PD4,
+	GPIO_PD5,
+	GPIO_PD6,
+	GPIO_PD7,
+	GPIO_PE0,	/* pin 32 */
+	GPIO_PE1,
+	GPIO_PE2,
+	GPIO_PE3,
+	GPIO_PE4,
+	GPIO_PE5,
+	GPIO_PE6,
+	GPIO_PE7,
+	GPIO_PF0,	/* pin 40 */
+	GPIO_PF1,
+	GPIO_PF2,
+	GPIO_PF3,
+	GPIO_PF4,
+	GPIO_PF5,
+	GPIO_PF6,
+	GPIO_PF7,
+	GPIO_PG0,	/* pin 48 */
+	GPIO_PG1,
+	GPIO_PG2,
+	GPIO_PG3,
+	GPIO_PG4,
+	GPIO_PG5,
+	GPIO_PG6,
+	GPIO_PG7,
+	GPIO_PH0,	/* pin 56 */
+	GPIO_PH1,
+	GPIO_PH2,
+	GPIO_PH3,
+	GPIO_PH4,
+	GPIO_PH5,
+	GPIO_PH6,
+	GPIO_PH7,
+	GPIO_PI0,	/* pin 64 */
+	GPIO_PI1,
+	GPIO_PI2,
+	GPIO_PI3,
+	GPIO_PI4,
+	GPIO_PI5,
+	GPIO_PI6,
+	GPIO_PI7,
+	GPIO_PJ0,	/* pin 72 */
+	GPIO_PJ1,
+	GPIO_PJ2,
+	GPIO_PJ3,
+	GPIO_PJ4,
+	GPIO_PJ5,
+	GPIO_PJ6,
+	GPIO_PJ7,
+	GPIO_PK0,	/* pin 80 */
+	GPIO_PK1,
+	GPIO_PK2,
+	GPIO_PK3,
+	GPIO_PK4,
+	GPIO_PK5,
+	GPIO_PK6,
+	GPIO_PK7,
+	GPIO_PL0,	/* pin 88 */
+	GPIO_PL1,
+	GPIO_PL2,
+	GPIO_PL3,
+	GPIO_PL4,
+	GPIO_PL5,
+	GPIO_PL6,
+	GPIO_PL7,
+	GPIO_PM0,	/* pin 96 */
+	GPIO_PM1,
+	GPIO_PM2,
+	GPIO_PM3,
+	GPIO_PM4,
+	GPIO_PM5,
+	GPIO_PM6,
+	GPIO_PM7,
+	GPIO_PN0,	/* pin 104 */
+	GPIO_PN1,
+	GPIO_PN2,
+	GPIO_PN3,
+	GPIO_PN4,
+	GPIO_PN5,
+	GPIO_PN6,
+	GPIO_PN7,
+	GPIO_PO0,	/* pin 112 */
+	GPIO_PO1,
+	GPIO_PO2,
+	GPIO_PO3,
+	GPIO_PO4,
+	GPIO_PO5,
+	GPIO_PO6,
+	GPIO_PO7,
+	GPIO_PP0,	/* pin 120 */
+	GPIO_PP1,
+	GPIO_PP2,
+	GPIO_PP3,
+	GPIO_PP4,
+	GPIO_PP5,
+	GPIO_PP6,
+	GPIO_PP7,
+	GPIO_PQ0,	/* pin 128 */
+	GPIO_PQ1,
+	GPIO_PQ2,
+	GPIO_PQ3,
+	GPIO_PQ4,
+	GPIO_PQ5,
+	GPIO_PQ6,
+	GPIO_PQ7,
+	GPIO_PR0,	/* pin 136 */
+	GPIO_PR1,
+	GPIO_PR2,
+	GPIO_PR3,
+	GPIO_PR4,
+	GPIO_PR5,
+	GPIO_PR6,
+	GPIO_PR7,
+	GPIO_PS0,	/* pin 144 */
+	GPIO_PS1,
+	GPIO_PS2,
+	GPIO_PS3,
+	GPIO_PS4,
+	GPIO_PS5,
+	GPIO_PS6,
+	GPIO_PS7,
+	GPIO_PT0,	/* pin 152 */
+	GPIO_PT1,
+	GPIO_PT2,
+	GPIO_PT3,
+	GPIO_PT4,
+	GPIO_PT5,
+	GPIO_PT6,
+	GPIO_PT7,
+	GPIO_PU0,	/* pin 160 */
+	GPIO_PU1,
+	GPIO_PU2,
+	GPIO_PU3,
+	GPIO_PU4,
+	GPIO_PU5,
+	GPIO_PU6,
+	GPIO_PU7,
+	GPIO_PV0,	/* pin 168 */
+	GPIO_PV1,
+	GPIO_PV2,
+	GPIO_PV3,
+	GPIO_PV4,
+	GPIO_PV5,
+	GPIO_PV6,
+	GPIO_PV7,
+	GPIO_PW0,	/* pin 176 */
+	GPIO_PW1,
+	GPIO_PW2,
+	GPIO_PW3,
+	GPIO_PW4,
+	GPIO_PW5,
+	GPIO_PW6,
+	GPIO_PW7,
+	GPIO_PX0,	/* pin 184 */
+	GPIO_PX1,
+	GPIO_PX2,
+	GPIO_PX3,
+	GPIO_PX4,
+	GPIO_PX5,
+	GPIO_PX6,
+	GPIO_PX7,
+	GPIO_PY0,	/* pin 192 */
+	GPIO_PY1,
+	GPIO_PY2,
+	GPIO_PY3,
+	GPIO_PY4,
+	GPIO_PY5,
+	GPIO_PY6,
+	GPIO_PY7,
+	GPIO_PZ0,	/* pin 200 */
+	GPIO_PZ1,
+	GPIO_PZ2,
+	GPIO_PZ3,
+	GPIO_PZ4,
+	GPIO_PZ5,
+	GPIO_PZ6,
+	GPIO_PZ7,
+	GPIO_PAA0,	/* pin 208 */
+	GPIO_PAA1,
+	GPIO_PAA2,
+	GPIO_PAA3,
+	GPIO_PAA4,
+	GPIO_PAA5,
+	GPIO_PAA6,
+	GPIO_PAA7,
+	GPIO_PBB0,	/* pin 216 */
+	GPIO_PBB1,
+	GPIO_PBB2,
+	GPIO_PBB3,
+	GPIO_PBB4,
+	GPIO_PBB5,
+	GPIO_PBB6,
+	GPIO_PBB7,
+	GPIO_PCC0,	/* pin 224 */
+	GPIO_PCC1,
+	GPIO_PCC2,
+	GPIO_PCC3,
+	GPIO_PCC4,
+	GPIO_PCC5,
+	GPIO_PCC6,
+	GPIO_PCC7,
+	GPIO_PDD0,	/* pin 232 */
+	GPIO_PDD1,
+	GPIO_PDD2,
+	GPIO_PDD3,
+	GPIO_PDD4,
+	GPIO_PDD5,
+	GPIO_PDD6,
+	GPIO_PDD7,
+	GPIO_PEE0,	/* pin 240 */
+	GPIO_PEE1,
+	GPIO_PEE2,
+	GPIO_PEE3,
+	GPIO_PEE4,
+	GPIO_PEE5,
+	GPIO_PEE6,
+	GPIO_PEE7,	/* pin 247 */
+};
+
+#endif	/* _TEGRA30_GPIO_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/hardware.h b/arch/arm/include/asm/arch-tegra30/hardware.h
new file mode 100644
index 0000000..b1a5aa9
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/hardware.h
@@ -0,0 +1,22 @@ 
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA30_HARDWARE_H_
+#define _TEGRA30_HARDWARE_H_
+
+/* include tegra specific hardware definitions */
+
+#endif /* _TEGRA30-HARDWARE_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/pinmux-config-common.h b/arch/arm/include/asm/arch-tegra30/pinmux-config-common.h
new file mode 100644
index 0000000..9fa3375
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/pinmux-config-common.h
@@ -0,0 +1,339 @@ 
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA30_PINMUX_CONFIG_COMMON_H_
+#define _TEGRA30_PINMUX_CONFIG_COMMON_H_
+
+#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io)	\
+	{							\
+		.pingroup	= PINGRP_##_pingroup,		\
+		.func		= PMUX_FUNC_##_mux,		\
+		.pull		= PMUX_PULL_##_pull,		\
+		.tristate	= PMUX_TRI_##_tri,		\
+		.io		= PMUX_PIN_##_io,		\
+		.lock		= PMUX_PIN_LOCK_DEFAULT,	\
+		.od		= PMUX_PIN_OD_DEFAULT,		\
+		.ioreset	= PMUX_PIN_IO_RESET_DEFAULT,	\
+	}
+
+#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \
+	{							\
+		.pingroup	= PINGRP_##_pingroup,		\
+		.func		= PMUX_FUNC_##_mux,		\
+		.pull		= PMUX_PULL_##_pull,		\
+		.tristate	= PMUX_TRI_##_tri,		\
+		.io		= PMUX_PIN_##_io,		\
+		.lock		= PMUX_PIN_LOCK_##_lock,	\
+		.od		= PMUX_PIN_OD_##_od,		\
+		.ioreset	= PMUX_PIN_IO_RESET_DEFAULT,	\
+	}
+
+#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \
+	{							\
+		.pingroup	= PINGRP_##_pingroup,		\
+		.func		= PMUX_FUNC_##_mux,		\
+		.pull		= PMUX_PULL_##_pull,		\
+		.tristate	= PMUX_TRI_##_tri,		\
+		.io		= PMUX_PIN_##_io,		\
+		.lock		= PMUX_PIN_LOCK_##_lock,	\
+		.od		= PMUX_PIN_OD_DEFAULT,		\
+		.ioreset	= PMUX_PIN_IO_RESET_##_ioreset	\
+	}
+
+static struct pingroup_config tegra3_pinmux_common[] = {
+	/* SDMMC1 pinmux */
+	DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT),
+
+	/* SDMMC3 pinmux */
+	DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT6, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT7, RSVD1, NORMAL, NORMAL, INPUT),
+
+	/* SDMMC4 pinmux */
+	LV_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(SDMMC4_RST_N, RSVD1, DOWN, NORMAL, INPUT, DISABLE, DISABLE),
+
+	/* I2C1 pinmux */
+	I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+	/* I2C2 pinmux */
+	I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+	/* I2C3 pinmux */
+	I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+	/* I2C4 pinmux */
+	I2C_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+	/* Power I2C pinmux */
+	I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+	I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+	DEFAULT_PINMUX(ULPI_DATA0, UARTA, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(ULPI_DATA1, UARTA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_DATA2, UARTA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_DATA3, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_DATA4, UARTA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_DATA5, UARTA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_DATA6, UARTA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_DATA7, UARTA, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(ULPI_CLK, UARTD, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(ULPI_DIR, UARTD, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_NXT, UARTD, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(ULPI_STP, UARTD, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(DAP3_FS, I2S2, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP3_DIN, I2S2, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP3_DOUT, I2S2, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP3_SCLK, I2S2, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PV2, OWR, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(GPIO_PV3, RSVD1, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(CLK2_REQ, DAP, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_PWR1, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_PWR2, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_SDIN, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_SDOUT, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_WR_N, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_CS0_N, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_DC0, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_SCK, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_PWR0, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_PCLK, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_DE, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_HSYNC, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_VSYNC, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D0, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D1, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D2, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D3, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D4, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D5, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D6, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D7, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D8, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D9, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D10, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D11, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D12, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D13, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D14, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D15, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D16, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D17, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D18, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D19, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D20, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D21, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D22, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_D23, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_CS1_N, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_M1, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(LCD_DC1, DISPA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(CRT_HSYNC, CRT, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(CRT_VSYNC, CRT, NORMAL, NORMAL, OUTPUT),
+	LV_PINMUX(VI_D0, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D1, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D2, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D3, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D4, VI, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D5, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D7, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D10, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_MCLK, VI, UP, NORMAL, INPUT, DISABLE, DISABLE),
+	DEFAULT_PINMUX(UART2_RXD, IRDA, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(UART2_TXD, IRDA, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(GPIO_PU0, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PU1, RSVD1, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(GPIO_PU2, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PU3, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PU4, PWM1, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(GPIO_PU5, PWM2, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(GPIO_PU6, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(CLK3_REQ, DEV3, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_WP_N, GMI, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_CS2_N, RSVD1, UP, NORMAL, INPUT), /* EN_VDD_BL1 */
+	DEFAULT_PINMUX(GMI_AD8, PWM0, NORMAL, NORMAL, OUTPUT), /* LCD1_BL_PWM */
+	DEFAULT_PINMUX(GMI_AD10, NAND, NORMAL, NORMAL, OUTPUT), /* LCD1_BL_EN */
+	DEFAULT_PINMUX(GMI_A16, SPI4, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_A17, SPI4, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_A18, SPI4, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_A19, SPI4, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(CAM_MCLK, VI_ALT2, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PBB0, RSVD1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PBB3, VGP3, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PBB5, VGP5, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PBB6, VGP6, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PBB7, I2S4, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PCC2, I2S4, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT),
+
+	/* KBC keys */
+	DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW3, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW4, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW5, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW6, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW7, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW9, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW10, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW11, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW12, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW13, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW14, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW15, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL4, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PV0, RSVD, UP, NORMAL, INPUT),
+
+	DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(CLK1_REQ, DAP, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, INPUT),
+#ifdef CONFIG_SND_HDA_CODEC_REALTEK
+	DEFAULT_PINMUX(SPDIF_IN, DAP2, DOWN, NORMAL, INPUT),
+#else
+	DEFAULT_PINMUX(SPDIF_IN, SPDIF, NORMAL, NORMAL, INPUT),
+#endif
+	DEFAULT_PINMUX(SPDIF_OUT, SPDIF, NORMAL, NORMAL, OUTPUT),
+#ifdef CONFIG_SND_HDA_CODEC_REALTEK
+	DEFAULT_PINMUX(DAP2_FS, HDA, DOWN, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP2_DIN, HDA, DOWN, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP2_DOUT, HDA, DOWN, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP2_SCLK, HDA, DOWN, NORMAL, INPUT),
+#else
+	DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT),
+#endif
+	DEFAULT_PINMUX(SPI2_CS1_N, SPI2, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(SPI1_MOSI, SPI1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SPI1_SCK, SPI1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SPI1_CS0_N, SPI1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(SPI1_MISO, SPI1, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_L0_PRSNT_N, PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_L0_RST_N, PCIE, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(PEX_L0_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_WAKE_N, PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_L1_PRSNT_N, PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_L1_RST_N, PCIE, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(PEX_L1_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_L2_PRSNT_N, PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(PEX_L2_RST_N, PCIE, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(PEX_L2_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(HDMI_INT, RSVD0, NORMAL, TRISTATE, INPUT),
+
+	/* Gpios */
+	/* SDMMC1 CD gpio */
+	DEFAULT_PINMUX(GMI_IORDY, RSVD1, UP, NORMAL, INPUT),
+	/* SDMMC1 WP gpio */
+	LV_PINMUX(VI_D11, RSVD1, UP, NORMAL, INPUT, DISABLE, DISABLE),
+
+	/* Touch panel GPIO */
+	/* Touch IRQ */
+	DEFAULT_PINMUX(GMI_AD12, NAND, UP, NORMAL, INPUT),
+
+	/* Touch RESET */
+	DEFAULT_PINMUX(GMI_AD14, NAND, NORMAL, NORMAL, OUTPUT),
+
+	/* Power rails GPIO */
+	DEFAULT_PINMUX(SPI2_SCK, GMI, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(GPIO_PBB4, VGP4, NORMAL, NORMAL, INPUT),
+	DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT5, SDMMC3, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(SDMMC3_DAT4, SDMMC3, UP, NORMAL, INPUT),
+
+	LV_PINMUX(VI_D6, VI, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D8, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_D9, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_PCLK, RSVD1, UP, TRISTATE, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_HSYNC, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+	LV_PINMUX(VI_VSYNC, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+};
+
+static struct pingroup_config unused_pins_lowpower[] = {
+	DEFAULT_PINMUX(GMI_WAIT, NAND, UP, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_ADV_N, NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_CLK, NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_CS3_N, NAND, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(GMI_CS7_N, NAND, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_AD0, NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD1, NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD2, NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD3, NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD4, NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD5, NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD6, NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD7, NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD11, NAND, NORMAL, NORMAL, OUTPUT),
+	DEFAULT_PINMUX(GMI_AD13, NAND, UP, NORMAL, INPUT),
+	DEFAULT_PINMUX(GMI_WR_N, NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_OE_N, NAND, NORMAL, TRISTATE, OUTPUT),
+	DEFAULT_PINMUX(GMI_DQS, NAND, NORMAL, TRISTATE, OUTPUT),
+};
+
+#endif /* _TEGRA30_PINMUX_CONFIG_COMMON_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/pinmux.h b/arch/arm/include/asm/arch-tegra30/pinmux.h
new file mode 100644
index 0000000..e169c49
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/pinmux.h
@@ -0,0 +1,603 @@ 
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA30_PINMUX_H_
+#define _TEGRA30_PINMUX_H_
+
+/*
+ * Pin groups which we adjust. There are three basic attributes of each pin
+ * group which use this enum:
+ *
+ *	- function
+ *	- pullup / pulldown
+ *	- tristate or normal
+ */
+enum pmux_pingrp {
+	PINGRP_ULPI_DATA0 = 0,  /* offset 0x3000 */
+	PINGRP_ULPI_DATA1,
+	PINGRP_ULPI_DATA2,
+	PINGRP_ULPI_DATA3,
+	PINGRP_ULPI_DATA4,
+	PINGRP_ULPI_DATA5,
+	PINGRP_ULPI_DATA6,
+	PINGRP_ULPI_DATA7,
+	PINGRP_ULPI_CLK,
+	PINGRP_ULPI_DIR,
+	PINGRP_ULPI_NXT,
+	PINGRP_ULPI_STP,
+	PINGRP_DAP3_FS,
+	PINGRP_DAP3_DIN,
+	PINGRP_DAP3_DOUT,
+	PINGRP_DAP3_SCLK,
+	PINGRP_GPIO_PV0,
+	PINGRP_GPIO_PV1,
+	PINGRP_SDMMC1_CLK,
+	PINGRP_SDMMC1_CMD,
+	PINGRP_SDMMC1_DAT3,
+	PINGRP_SDMMC1_DAT2,
+	PINGRP_SDMMC1_DAT1,
+	PINGRP_SDMMC1_DAT0,
+	PINGRP_GPIO_PV2,
+	PINGRP_GPIO_PV3,
+	PINGRP_CLK2_OUT,
+	PINGRP_CLK2_REQ,
+	PINGRP_LCD_PWR1,
+	PINGRP_LCD_PWR2,
+	PINGRP_LCD_SDIN,
+	PINGRP_LCD_SDOUT,
+	PINGRP_LCD_WR_N,
+	PINGRP_LCD_CS0_N,
+	PINGRP_LCD_DC0,
+	PINGRP_LCD_SCK,
+	PINGRP_LCD_PWR0,
+	PINGRP_LCD_PCLK,
+	PINGRP_LCD_DE,
+	PINGRP_LCD_HSYNC,
+	PINGRP_LCD_VSYNC,
+	PINGRP_LCD_D0,
+	PINGRP_LCD_D1,
+	PINGRP_LCD_D2,
+	PINGRP_LCD_D3,
+	PINGRP_LCD_D4,
+	PINGRP_LCD_D5,
+	PINGRP_LCD_D6,
+	PINGRP_LCD_D7,
+	PINGRP_LCD_D8,
+	PINGRP_LCD_D9,
+	PINGRP_LCD_D10,
+	PINGRP_LCD_D11,
+	PINGRP_LCD_D12,
+	PINGRP_LCD_D13,
+	PINGRP_LCD_D14,
+	PINGRP_LCD_D15,
+	PINGRP_LCD_D16,
+	PINGRP_LCD_D17,
+	PINGRP_LCD_D18,
+	PINGRP_LCD_D19,
+	PINGRP_LCD_D20,
+	PINGRP_LCD_D21,
+	PINGRP_LCD_D22,
+	PINGRP_LCD_D23,
+	PINGRP_LCD_CS1_N,
+	PINGRP_LCD_M1,
+	PINGRP_LCD_DC1,
+	PINGRP_HDMI_INT,
+	PINGRP_DDC_SCL,
+	PINGRP_DDC_SDA,
+	PINGRP_CRT_HSYNC,
+	PINGRP_CRT_VSYNC,
+	PINGRP_VI_D0,
+	PINGRP_VI_D1,
+	PINGRP_VI_D2,
+	PINGRP_VI_D3,
+	PINGRP_VI_D4,
+	PINGRP_VI_D5,
+	PINGRP_VI_D6,
+	PINGRP_VI_D7,
+	PINGRP_VI_D8,
+	PINGRP_VI_D9,
+	PINGRP_VI_D10,
+	PINGRP_VI_D11,
+	PINGRP_VI_PCLK,
+	PINGRP_VI_MCLK,
+	PINGRP_VI_VSYNC,
+	PINGRP_VI_HSYNC,
+	PINGRP_UART2_RXD,
+	PINGRP_UART2_TXD,
+	PINGRP_UART2_RTS_N,
+	PINGRP_UART2_CTS_N,
+	PINGRP_UART3_TXD,
+	PINGRP_UART3_RXD,
+	PINGRP_UART3_CTS_N,
+	PINGRP_UART3_RTS_N,
+	PINGRP_GPIO_PU0,
+	PINGRP_GPIO_PU1,
+	PINGRP_GPIO_PU2,
+	PINGRP_GPIO_PU3,
+	PINGRP_GPIO_PU4,
+	PINGRP_GPIO_PU5,
+	PINGRP_GPIO_PU6,
+	PINGRP_GEN1_I2C_SDA,
+	PINGRP_GEN1_I2C_SCL,
+	PINGRP_DAP4_FS,
+	PINGRP_DAP4_DIN,
+	PINGRP_DAP4_DOUT,
+	PINGRP_DAP4_SCLK,
+	PINGRP_CLK3_OUT,
+	PINGRP_CLK3_REQ,
+	PINGRP_GMI_WP_N,
+	PINGRP_GMI_IORDY,
+	PINGRP_GMI_WAIT,
+	PINGRP_GMI_ADV_N,
+	PINGRP_GMI_CLK,
+	PINGRP_GMI_CS0_N,
+	PINGRP_GMI_CS1_N,
+	PINGRP_GMI_CS2_N,
+	PINGRP_GMI_CS3_N,
+	PINGRP_GMI_CS4_N,
+	PINGRP_GMI_CS6_N,
+	PINGRP_GMI_CS7_N,
+	PINGRP_GMI_AD0,
+	PINGRP_GMI_AD1,
+	PINGRP_GMI_AD2,
+	PINGRP_GMI_AD3,
+	PINGRP_GMI_AD4,
+	PINGRP_GMI_AD5,
+	PINGRP_GMI_AD6,
+	PINGRP_GMI_AD7,
+	PINGRP_GMI_AD8,
+	PINGRP_GMI_AD9,
+	PINGRP_GMI_AD10,
+	PINGRP_GMI_AD11,
+	PINGRP_GMI_AD12,
+	PINGRP_GMI_AD13,
+	PINGRP_GMI_AD14,
+	PINGRP_GMI_AD15,
+	PINGRP_GMI_A16,
+	PINGRP_GMI_A17,
+	PINGRP_GMI_A18,
+	PINGRP_GMI_A19,
+	PINGRP_GMI_WR_N,
+	PINGRP_GMI_OE_N,
+	PINGRP_GMI_DQS,
+	PINGRP_GMI_RST_N,
+	PINGRP_GEN2_I2C_SCL,
+	PINGRP_GEN2_I2C_SDA,
+	PINGRP_SDMMC4_CLK,
+	PINGRP_SDMMC4_CMD,
+	PINGRP_SDMMC4_DAT0,
+	PINGRP_SDMMC4_DAT1,
+	PINGRP_SDMMC4_DAT2,
+	PINGRP_SDMMC4_DAT3,
+	PINGRP_SDMMC4_DAT4,
+	PINGRP_SDMMC4_DAT5,
+	PINGRP_SDMMC4_DAT6,
+	PINGRP_SDMMC4_DAT7,
+	PINGRP_SDMMC4_RST_N,
+	PINGRP_CAM_MCLK,
+	PINGRP_GPIO_PCC1,
+	PINGRP_GPIO_PBB0,
+	PINGRP_CAM_I2C_SCL,
+	PINGRP_CAM_I2C_SDA,
+	PINGRP_GPIO_PBB3,
+	PINGRP_GPIO_PBB4,
+	PINGRP_GPIO_PBB5,
+	PINGRP_GPIO_PBB6,
+	PINGRP_GPIO_PBB7,
+	PINGRP_GPIO_PCC2,
+	PINGRP_JTAG_RTCK,
+	PINGRP_PWR_I2C_SCL,
+	PINGRP_PWR_I2C_SDA,
+	PINGRP_KB_ROW0,
+	PINGRP_KB_ROW1,
+	PINGRP_KB_ROW2,
+	PINGRP_KB_ROW3,
+	PINGRP_KB_ROW4,
+	PINGRP_KB_ROW5,
+	PINGRP_KB_ROW6,
+	PINGRP_KB_ROW7,
+	PINGRP_KB_ROW8,
+	PINGRP_KB_ROW9,
+	PINGRP_KB_ROW10,
+	PINGRP_KB_ROW11,
+	PINGRP_KB_ROW12,
+	PINGRP_KB_ROW13,
+	PINGRP_KB_ROW14,
+	PINGRP_KB_ROW15,
+	PINGRP_KB_COL0,
+	PINGRP_KB_COL1,
+	PINGRP_KB_COL2,
+	PINGRP_KB_COL3,
+	PINGRP_KB_COL4,
+	PINGRP_KB_COL5,
+	PINGRP_KB_COL6,
+	PINGRP_KB_COL7,
+	PINGRP_CLK_32K_OUT,
+	PINGRP_SYS_CLK_REQ,
+	PINGRP_CORE_PWR_REQ,
+	PINGRP_CPU_PWR_REQ,
+	PINGRP_PWR_INT_N,
+	PINGRP_CLK_32K_IN,
+	PINGRP_OWR,
+	PINGRP_DAP1_FS,
+	PINGRP_DAP1_DIN,
+	PINGRP_DAP1_DOUT,
+	PINGRP_DAP1_SCLK,
+	PINGRP_CLK1_REQ,
+	PINGRP_CLK1_OUT,
+	PINGRP_SPDIF_IN,
+	PINGRP_SPDIF_OUT,
+	PINGRP_DAP2_FS,
+	PINGRP_DAP2_DIN,
+	PINGRP_DAP2_DOUT,
+	PINGRP_DAP2_SCLK,
+	PINGRP_SPI2_MOSI,
+	PINGRP_SPI2_MISO,
+	PINGRP_SPI2_CS0_N,
+	PINGRP_SPI2_SCK,
+	PINGRP_SPI1_MOSI,
+	PINGRP_SPI1_SCK,
+	PINGRP_SPI1_CS0_N,
+	PINGRP_SPI1_MISO,
+	PINGRP_SPI2_CS1_N,
+	PINGRP_SPI2_CS2_N,
+	PINGRP_SDMMC3_CLK,
+	PINGRP_SDMMC3_CMD,
+	PINGRP_SDMMC3_DAT0,
+	PINGRP_SDMMC3_DAT1,
+	PINGRP_SDMMC3_DAT2,
+	PINGRP_SDMMC3_DAT3,
+	PINGRP_SDMMC3_DAT4,
+	PINGRP_SDMMC3_DAT5,
+	PINGRP_SDMMC3_DAT6,
+	PINGRP_SDMMC3_DAT7,
+	PINGRP_PEX_L0_PRSNT_N,
+	PINGRP_PEX_L0_RST_N,
+	PINGRP_PEX_L0_CLKREQ_N,
+	PINGRP_PEX_WAKE_N,
+	PINGRP_PEX_L1_PRSNT_N,
+	PINGRP_PEX_L1_RST_N,
+	PINGRP_PEX_L1_CLKREQ_N,
+	PINGRP_PEX_L2_PRSNT_N,
+	PINGRP_PEX_L2_RST_N,
+	PINGRP_PEX_L2_CLKREQ_N,
+	PINGRP_HDMI_CEC,	/* offset 0x33e0 */
+	PINGRP_COUNT,
+};
+
+enum pdrive_pingrp {
+	PDRIVE_PINGROUP_AO1 = 0, /* offset 0x868 */
+	PDRIVE_PINGROUP_AO2,
+	PDRIVE_PINGROUP_AT1,
+	PDRIVE_PINGROUP_AT2,
+	PDRIVE_PINGROUP_AT3,
+	PDRIVE_PINGROUP_AT4,
+	PDRIVE_PINGROUP_AT5,
+	PDRIVE_PINGROUP_CDEV1,
+	PDRIVE_PINGROUP_CDEV2,
+	PDRIVE_PINGROUP_CSUS,
+	PDRIVE_PINGROUP_DAP1,
+	PDRIVE_PINGROUP_DAP2,
+	PDRIVE_PINGROUP_DAP3,
+	PDRIVE_PINGROUP_DAP4,
+	PDRIVE_PINGROUP_DBG,
+	PDRIVE_PINGROUP_LCD1,
+	PDRIVE_PINGROUP_LCD2,
+	PDRIVE_PINGROUP_SDIO2,
+	PDRIVE_PINGROUP_SDIO3,
+	PDRIVE_PINGROUP_SPI,
+	PDRIVE_PINGROUP_UAA,
+	PDRIVE_PINGROUP_UAB,
+	PDRIVE_PINGROUP_UART2,
+	PDRIVE_PINGROUP_UART3,
+	PDRIVE_PINGROUP_VI1 = 24,	/* offset 0x8c8 */
+	PDRIVE_PINGROUP_SDIO1 = 33,	/* offset 0x8ec */
+	PDRIVE_PINGROUP_CRT = 36,	/* offset 0x8f8 */
+	PDRIVE_PINGROUP_DDC,
+	PDRIVE_PINGROUP_GMA,
+	PDRIVE_PINGROUP_GMB,
+	PDRIVE_PINGROUP_GMC,
+	PDRIVE_PINGROUP_GMD,
+	PDRIVE_PINGROUP_GME,
+	PDRIVE_PINGROUP_GMF,
+	PDRIVE_PINGROUP_GMG,
+	PDRIVE_PINGROUP_GMH,
+	PDRIVE_PINGROUP_OWR,
+	PDRIVE_PINGROUP_UAD,
+	PDRIVE_PINGROUP_GPV,
+	PDRIVE_PINGROUP_DEV3 = 49,	/* offset 0x92c */
+	PDRIVE_PINGROUP_CEC = 52,	/* offset 0x938 */
+	PDRIVE_PINGROUP_COUNT,
+};
+
+/*
+ * Functions which can be assigned to each of the pin groups. The values here
+ * bear no relation to the values programmed into pinmux registers and are
+ * purely a convenience. The translation is done through a table search.
+ */
+enum pmux_func {
+	PMUX_FUNC_RSVD = 0x8000,
+	PMUX_FUNC_RSVD0 = PMUX_FUNC_RSVD,
+	PMUX_FUNC_RSVD1 = 0x8000,
+	PMUX_FUNC_RSVD2 = 0x8001,
+	PMUX_FUNC_RSVD3 = 0x8002,
+	PMUX_FUNC_RSVD4 = 0x8003,
+	PMUX_FUNC_BAD = 0x4000,		/* Invalid! */
+	PMUX_FUNC_NONE = 0,
+
+	PMUX_FUNC_AHB_CLK,
+	PMUX_FUNC_APB_CLK,
+	PMUX_FUNC_AUDIO_SYNC,
+	PMUX_FUNC_CRT,
+	PMUX_FUNC_DAP1,
+	PMUX_FUNC_DAP2,
+	PMUX_FUNC_DAP3,
+	PMUX_FUNC_DAP4,
+	PMUX_FUNC_DAP5,
+	PMUX_FUNC_DISPA,
+	PMUX_FUNC_DISPB,
+	PMUX_FUNC_EMC_TEST0_DLL,
+	PMUX_FUNC_EMC_TEST1_DLL,
+	PMUX_FUNC_GMI,
+	PMUX_FUNC_GMI_INT,
+	PMUX_FUNC_HDMI,
+	PMUX_FUNC_I2C,
+	PMUX_FUNC_I2C1 = PMUX_FUNC_I2C,
+	PMUX_FUNC_I2C2,
+	PMUX_FUNC_I2C3,
+	PMUX_FUNC_IDE,
+	PMUX_FUNC_IRDA,
+	PMUX_FUNC_KBC,
+	PMUX_FUNC_MIO,
+	PMUX_FUNC_MIPI_HS,
+	PMUX_FUNC_NAND,
+	PMUX_FUNC_OSC,
+	PMUX_FUNC_OWR,
+	PMUX_FUNC_PCIE,
+	PMUX_FUNC_PLLA_OUT,
+	PMUX_FUNC_PLLC_OUT1,
+	PMUX_FUNC_PLLM_OUT1,
+	PMUX_FUNC_PLLP_OUT2,
+	PMUX_FUNC_PLLP_OUT3,
+	PMUX_FUNC_PLLP_OUT4,
+	PMUX_FUNC_PWM,
+	PMUX_FUNC_PWR_INTR,
+	PMUX_FUNC_PWR_ON,
+	PMUX_FUNC_RTCK,
+	PMUX_FUNC_SDIO1,
+	PMUX_FUNC_SDMMC1 = PMUX_FUNC_SDIO1,
+	PMUX_FUNC_SDIO2,
+	PMUX_FUNC_SDMMC2 = PMUX_FUNC_SDIO2,
+	PMUX_FUNC_SDIO3,
+	PMUX_FUNC_SDMMC3 = PMUX_FUNC_SDIO3,
+	PMUX_FUNC_SDIO4,
+	PMUX_FUNC_SDMMC4 = PMUX_FUNC_SDIO4,
+	PMUX_FUNC_SFLASH,
+	PMUX_FUNC_SPDIF,
+	PMUX_FUNC_SPI1,
+	PMUX_FUNC_SPI2,
+	PMUX_FUNC_SPI2_ALT,
+	PMUX_FUNC_SPI3,
+	PMUX_FUNC_SPI4,
+	PMUX_FUNC_TRACE,
+	PMUX_FUNC_TWC,
+	PMUX_FUNC_UARTA,
+	PMUX_FUNC_UARTB,
+	PMUX_FUNC_UARTC,
+	PMUX_FUNC_UARTD,
+	PMUX_FUNC_UARTE,
+	PMUX_FUNC_ULPI,
+	PMUX_FUNC_VI,
+	PMUX_FUNC_VI_SENSOR_CLK,
+	PMUX_FUNC_XIO,
+	PMUX_FUNC_BLINK,
+	PMUX_FUNC_CEC,
+	PMUX_FUNC_CLK12,
+	PMUX_FUNC_DAP,
+	PMUX_FUNC_DAPSDMMC2,
+	PMUX_FUNC_DDR,
+	PMUX_FUNC_DEV3,
+	PMUX_FUNC_DTV,
+	PMUX_FUNC_VI_ALT1,
+	PMUX_FUNC_VI_ALT2,
+	PMUX_FUNC_VI_ALT3,
+	PMUX_FUNC_EMC_DLL,
+	PMUX_FUNC_EXTPERIPH1,
+	PMUX_FUNC_EXTPERIPH2,
+	PMUX_FUNC_EXTPERIPH3,
+	PMUX_FUNC_GMI_ALT,
+	PMUX_FUNC_HDA,
+	PMUX_FUNC_HSI,
+	PMUX_FUNC_I2C4,
+	PMUX_FUNC_I2C5,
+	PMUX_FUNC_I2CPWR,
+	PMUX_FUNC_I2S0,
+	PMUX_FUNC_I2S1,
+	PMUX_FUNC_I2S2,
+	PMUX_FUNC_I2S3,
+	PMUX_FUNC_I2S4,
+	PMUX_FUNC_NAND_ALT,
+	PMUX_FUNC_POPSDIO4,
+	PMUX_FUNC_POPSDMMC4,
+	PMUX_FUNC_PWM0,
+	PMUX_FUNC_PWM1,
+	PMUX_FUNC_PWM2,
+	PMUX_FUNC_PWM3,
+	PMUX_FUNC_SATA,
+	PMUX_FUNC_SPI5,
+	PMUX_FUNC_SPI6,
+	PMUX_FUNC_SYSCLK,
+	PMUX_FUNC_VGP1,
+	PMUX_FUNC_VGP2,
+	PMUX_FUNC_VGP3,
+	PMUX_FUNC_VGP4,
+	PMUX_FUNC_VGP5,
+	PMUX_FUNC_VGP6,
+	PMUX_FUNC_SAFE,
+
+	PMUX_FUNC_MAX,
+};
+
+/* return 1 if a pmux_func is in range */
+#define pmux_func_isvalid(func) ((((func) > 0) && ((func) < PMUX_FUNC_MAX)) || \
+		(((func) >= PMUX_FUNC_RSVD0) && ((func) <= PMUX_FUNC_RSVD4)))
+
+/* return 1 if a pingrp is in range */
+#define pmux_pingrp_isvalid(pin) (((pin) >= 0) && ((pin) < PINGRP_COUNT))
+
+/* The pullup/pulldown state of a pin group */
+enum pmux_pull {
+	PMUX_PULL_NORMAL = 0,
+	PMUX_PULL_DOWN,
+	PMUX_PULL_UP,
+};
+/* return 1 if a pin_pupd_is in range */
+#define pmux_pin_pupd_isvalid(pupd) (((pupd) >= PMUX_PULL_NORMAL) && \
+				((pupd) <= PMUX_PULL_UP))
+
+/* Defines whether a pin group is tristated or in normal operation */
+enum pmux_tristate {
+	PMUX_TRI_NORMAL = 0,
+	PMUX_TRI_TRISTATE = 1,
+};
+/* return 1 if a pin_tristate_is in range */
+#define pmux_pin_tristate_isvalid(tristate) (((tristate) >= PMUX_TRI_NORMAL) \
+				&& ((tristate) <= PMUX_TRI_TRISTATE))
+
+enum pmux_pin_io {
+	PMUX_PIN_OUTPUT = 0,
+	PMUX_PIN_INPUT = 1,
+};
+/* return 1 if a pin_io_is in range */
+#define pmux_pin_io_isvalid(io) (((io) >= PMUX_PIN_OUTPUT) && \
+				((io) <= PMUX_PIN_INPUT))
+
+enum pmux_pin_lock {
+	PMUX_PIN_LOCK_DEFAULT = 0,
+	PMUX_PIN_LOCK_DISABLE,
+	PMUX_PIN_LOCK_ENABLE,
+};
+/* return 1 if a pin_lock is in range */
+#define pmux_pin_lock_isvalid(lock) (((lock) >= PMUX_PIN_LOCK_DEFAULT) && \
+				((lock) <= PMUX_PIN_LOCK_ENABLE))
+
+enum pmux_pin_od {
+	PMUX_PIN_OD_DEFAULT = 0,
+	PMUX_PIN_OD_DISABLE,
+	PMUX_PIN_OD_ENABLE,
+};
+/* return 1 if a pin_od is in range */
+#define pmux_pin_od_isvalid(od) (((od) >= PMUX_PIN_OD_DEFAULT) && \
+				((od) <= PMUX_PIN_OD_ENABLE))
+
+enum pmux_pin_ioreset {
+	PMUX_PIN_IO_RESET_DEFAULT = 0,
+	PMUX_PIN_IO_RESET_DISABLE,
+	PMUX_PIN_IO_RESET_ENABLE,
+};
+/* return 1 if a pin_ioreset_is in range */
+#define pmux_pin_ioreset_isvalid(ioreset) \
+				(((ioreset) >= PMUX_PIN_IO_RESET_DEFAULT) && \
+				((ioreset) <= PMUX_PIN_IO_RESET_ENABLE))
+
+/* Available power domains used by pin groups */
+enum pmux_vddio {
+	PMUX_VDDIO_BB = 0,
+	PMUX_VDDIO_LCD,
+	PMUX_VDDIO_VI,
+	PMUX_VDDIO_UART,
+	PMUX_VDDIO_DDR,
+	PMUX_VDDIO_NAND,
+	PMUX_VDDIO_SYS,
+	PMUX_VDDIO_AUDIO,
+	PMUX_VDDIO_SD,
+	PMUX_VDDIO_CAM,
+	PMUX_VDDIO_GMI,
+	PMUX_VDDIO_PEXCTL,
+	PMUX_VDDIO_SDMMC1,
+	PMUX_VDDIO_SDMMC3,
+	PMUX_VDDIO_SDMMC4,
+
+	PMUX_VDDIO_NONE
+};
+
+/* t30 pin drive group and pin mux registers */
+#define PDRIVE_PINGROUP_OFFSET	(0x868 >> 2)
+#define PMUX_OFFSET	((0x3000 >> 2) - PDRIVE_PINGROUP_OFFSET - \
+				PDRIVE_PINGROUP_COUNT)
+struct pmux_tri_ctlr {
+	uint pmt_reserved0;		/* ABP_MISC_PP_ reserved offset 00 */
+	uint pmt_reserved1;		/* ABP_MISC_PP_ reserved offset 04 */
+	uint pmt_strap_opt_a;		/* _STRAPPING_OPT_A_0, offset 08   */
+	uint pmt_reserved2;		/* ABP_MISC_PP_ reserved offset 0C */
+	uint pmt_reserved3;		/* ABP_MISC_PP_ reserved offset 10 */
+	uint pmt_reserved4[4];		/* _TRI_STATE_REG_A/B/C/D in t20 */
+	uint pmt_cfg_ctl;		/* _CONFIG_CTL_0, offset 24        */
+
+	uint pmt_reserved[528];		/* ABP_MISC_PP_ reserved offs 28-864 */
+
+	uint pmt_drive[PDRIVE_PINGROUP_COUNT];	/* pin drive grps offs 868 */
+	uint pmt_reserved5[PMUX_OFFSET];
+	uint pmt_ctl[PINGRP_COUNT];	/* mux/pupd/tri regs, offset 0x3000 */
+};
+
+/*
+ * This defines the configuration for a pin, including the function assigned,
+ * pull up/down settings and tristate settings. Having set up one of these
+ * you can call pinmux_config_pingroup() to configure a pin in one step. Also
+ * available is pinmux_config_table() to configure a list of pins.
+ */
+struct pingroup_config {
+	enum pmux_pingrp pingroup;	/* pin group PINGRP_...             */
+	enum pmux_func func;		/* function to assign FUNC_...      */
+	enum pmux_pull pull;		/* pull up/down/normal PMUX_PULL_...*/
+	enum pmux_tristate tristate;	/* tristate or normal PMUX_TRI_...  */
+	enum pmux_pin_io io;		/* input or output PMUX_PIN_...  */
+	enum pmux_pin_lock lock;	/* lock enable/disable PMUX_PIN...  */
+	enum pmux_pin_od od;		/* open-drain or push-pull driver  */
+	enum pmux_pin_ioreset ioreset;	/* input/output reset PMUX_PIN...  */
+};
+
+/* Set a pin group to tristate */
+void pinmux_tristate_enable(enum pmux_pingrp pin);
+
+/* Set a pin group to normal (non tristate) */
+void pinmux_tristate_disable(enum pmux_pingrp pin);
+
+/* Set the pull up/down feature for a pin group */
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
+
+/* Set the mux function for a pin group */
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
+
+/* Set the complete configuration for a pin group */
+void pinmux_config_pingroup(struct pingroup_config *config);
+
+/* Set a pin group to tristate or normal */
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable);
+
+/* Set a pin group as input or output */
+void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io);
+
+/**
+ * Confiuure a list of pin groups
+ *
+ * @param config	List of config items
+ * @param len		Number of config items in list
+ */
+void pinmux_config_table(struct pingroup_config *config, int len);
+
+#endif	/* _TEGRA30_PINMUX_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/pmu.h b/arch/arm/include/asm/arch-tegra30/pmu.h
new file mode 100644
index 0000000..52bea29
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/pmu.h
@@ -0,0 +1,23 @@ 
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA30_PMU_H_
+#define _TEGRA30_PMU_H_
+
+/* Set core and CPU voltages to nominal levels */
+int pmu_set_nominal(void);
+
+#endif	/* _TEGRA30_PMU_H_ */
diff --git a/arch/arm/include/asm/arch-tegra30/tegra.h b/arch/arm/include/asm/arch-tegra30/tegra.h
new file mode 100644
index 0000000..46a7474
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra30/tegra.h
@@ -0,0 +1,26 @@ 
+/*
+ * Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _TEGRA30_H_
+#define _TEGRA30_H_
+
+#define NV_PA_SDRAM_BASE	0x80000000	/* 0x80000000 for real T30 */
+
+#include <asm/arch-tegra/tegra.h>
+
+#define BCT_ODMDATA_OFFSET	6116	/* 12 bytes from end of BCT */
+
+#endif	/* TEGRA30_H */