Patchwork [U-Boot,1/6] arm: Remove support for lpc2292

login
register
mail settings
Submitter Marek Vasut
Date Sept. 30, 2012, 6:07 p.m.
Message ID <1349028459-17025-1-git-send-email-marex@denx.de>
Download mbox | patch
Permalink /patch/188184/
State Superseded
Delegated to: Albert ARIBAUD
Headers show

Comments

Marek Vasut - Sept. 30, 2012, 6:07 p.m.
This stuff has been rotting in the tree for a year now. Remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
---
 arch/arm/cpu/arm720t/cpu.c                         |    2 +-
 arch/arm/cpu/arm720t/interrupts.c                  |   28 +--
 arch/arm/cpu/arm720t/lpc2292/Makefile              |   50 ----
 arch/arm/cpu/arm720t/lpc2292/flash.c               |  249 --------------------
 arch/arm/cpu/arm720t/lpc2292/iap_entry.S           |    7 -
 arch/arm/cpu/arm720t/lpc2292/mmc.c                 |  131 ----------
 arch/arm/cpu/arm720t/lpc2292/mmc_hw.c              |  233 ------------------
 arch/arm/cpu/arm720t/lpc2292/mmc_hw.h              |   29 ---
 arch/arm/cpu/arm720t/lpc2292/spi.c                 |   40 ----
 arch/arm/cpu/arm720t/start.S                       |   69 +-----
 arch/arm/include/asm/arch-lpc2292/hardware.h       |   33 ---
 .../include/asm/arch-lpc2292/lpc2292_registers.h   |  225 ------------------
 arch/arm/include/asm/arch-lpc2292/spi.h            |   82 -------
 drivers/i2c/soft_i2c.c                             |    3 -
 drivers/serial/Makefile                            |    1 -
 drivers/serial/serial_lpc2292.c                    |  104 --------
 include/flash.h                                    |    1 -
 17 files changed, 3 insertions(+), 1284 deletions(-)
 delete mode 100644 arch/arm/cpu/arm720t/lpc2292/Makefile
 delete mode 100644 arch/arm/cpu/arm720t/lpc2292/flash.c
 delete mode 100644 arch/arm/cpu/arm720t/lpc2292/iap_entry.S
 delete mode 100644 arch/arm/cpu/arm720t/lpc2292/mmc.c
 delete mode 100644 arch/arm/cpu/arm720t/lpc2292/mmc_hw.c
 delete mode 100644 arch/arm/cpu/arm720t/lpc2292/mmc_hw.h
 delete mode 100644 arch/arm/cpu/arm720t/lpc2292/spi.c
 delete mode 100644 arch/arm/include/asm/arch-lpc2292/hardware.h
 delete mode 100644 arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h
 delete mode 100644 arch/arm/include/asm/arch-lpc2292/spi.h
 delete mode 100644 drivers/serial/serial_lpc2292.c

Patch

diff --git a/arch/arm/cpu/arm720t/cpu.c b/arch/arm/cpu/arm720t/cpu.c
index ce7b3c9..e25f6f2 100644
--- a/arch/arm/cpu/arm720t/cpu.c
+++ b/arch/arm/cpu/arm720t/cpu.c
@@ -46,7 +46,7 @@  int cleanup_before_linux (void)
 	 * and we set the CPU-speed to 73 MHz - see start.S for details
 	 */
 
-#if defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) || defined(CONFIG_LPC2292)
+#if defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B)
 	disable_interrupts ();
 	/* Nothing more needed */
 #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c
index c2f898f..5b21cc3 100644
--- a/arch/arm/cpu/arm720t/interrupts.c
+++ b/arch/arm/cpu/arm720t/interrupts.c
@@ -37,11 +37,6 @@ 
 /* macro to read the 16 bit timer */
 #define READ_TIMER (IO_TC1D & 0xffff)
 
-#ifdef CONFIG_LPC2292
-#undef READ_TIMER
-#define READ_TIMER (0xFFFFFFFF - GET32(T0TC))
-#endif
-
 #else
 #define IRQEN	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE))
 #define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL))
@@ -73,13 +68,6 @@  void do_irq (struct pt_regs *pt_regs)
 	}
 #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
 	/* No do_irq() for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
-
-    void (*pfnct)(void);
-
-    pfnct = (void (*)(void))VICVectAddr;
-
-    (*pfnct)();
 #else
 #error do_irq() not defined for this CPU type
 #endif
@@ -172,14 +160,6 @@  int timer_init (void)
 
 	/* Start timer */
 	SET_REG( REG_TMOD, TM0_RUN);
-#elif defined(CONFIG_LPC2292)
-	PUT32(T0IR, 0);		/* disable all timer0 interrupts */
-	PUT32(T0TCR, 0);	/* disable timer0 */
-	PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ);
-	PUT32(T0MCR, 0);
-	PUT32(T0TC, 0);
-	PUT32(T0TCR, 1);	/* enable timer0 */
-
 #elif defined(CONFIG_TEGRA)
 	/* No timer routines for tegra as yet */
 	lastdec = 0;
@@ -198,7 +178,7 @@  int timer_init (void)
  */
 
 
-#if defined(CONFIG_NETARM) || defined(CONFIG_LPC2292)
+#if defined(CONFIG_NETARM)
 
 ulong get_timer (ulong base)
 {
@@ -216,12 +196,6 @@  void __udelay (unsigned long usec)
 	tmo += get_timer (0);
 
 	while (get_timer_masked () < tmo)
-#ifdef CONFIG_LPC2292
-		/* GJ - not sure whether this is really needed or a misunderstanding */
-		__asm__ __volatile__(" nop");
-#else
-		/*NOP*/;
-#endif
 }
 
 ulong get_timer_masked (void)
diff --git a/arch/arm/cpu/arm720t/lpc2292/Makefile b/arch/arm/cpu/arm720t/lpc2292/Makefile
deleted file mode 100644
index 1b93008..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@ 
-#
-# (C) Copyright 2000-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-COBJS	= flash.o mmc.o mmc_hw.o spi.o
-SOBJS	= $(obj)iap_entry.o
-
-SRCS	:= $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-# this MUST be compiled as thumb code!
-$(SOBJS):
-	$(CC) $(AFLAGS) -march=armv4t -c -o $(SOBJS) iap_entry.S
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/arch/arm/cpu/arm720t/lpc2292/flash.c b/arch/arm/cpu/arm720t/lpc2292/flash.c
deleted file mode 100644
index 3d2dc32..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/flash.c
+++ /dev/null
@@ -1,249 +0,0 @@ 
-/*
- * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
- *
- * Modified to remove all but the IAP-command related code by
- * Gary Jennejohn <garyj@denx.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-/* IAP commands use 32 bytes at the top of CPU internal sram, we
-   use 512 bytes below that */
-#define COPY_BUFFER_LOCATION 0x40003de0
-
-#define IAP_LOCATION 0x7ffffff1
-#define IAP_CMD_PREPARE 50
-#define IAP_CMD_COPY 51
-#define IAP_CMD_ERASE 52
-#define IAP_CMD_CHECK 53
-#define IAP_CMD_ID 54
-#define IAP_CMD_VERSION 55
-#define IAP_CMD_COMPARE 56
-
-#define IAP_RET_CMD_SUCCESS 0
-
-static unsigned long command[5];
-static unsigned long result[2];
-
-extern void iap_entry(unsigned long * command, unsigned long * result);
-
-/*-----------------------------------------------------------------------
- *
- */
-static int get_flash_sector(flash_info_t * info, ulong flash_addr)
-{
-	int i;
-
-	for(i = 1; i < (info->sector_count); i++) {
-		if (flash_addr < (info->start[i]))
-			break;
-	}
-
-	return (i-1);
-}
-
-/*-----------------------------------------------------------------------
- * This function assumes that flash_addr is aligned on 512 bytes boundary
- * in flash. This function also assumes that prepare have been called
- * for the sector in question.
- */
-int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr)
-{
-	int first_sector;
-	int last_sector;
-
-	first_sector = get_flash_sector(info, flash_addr);
-	last_sector = get_flash_sector(info, flash_addr + 512 - 1);
-
-	/* prepare sectors for write */
-	command[0] = IAP_CMD_PREPARE;
-	command[1] = first_sector;
-	command[2] = last_sector;
-	iap_entry(command, result);
-	if (result[0] != IAP_RET_CMD_SUCCESS) {
-		printf("IAP prepare failed\n");
-		return ERR_PROG_ERROR;
-	}
-
-	command[0] = IAP_CMD_COPY;
-	command[1] = flash_addr;
-	command[2] = COPY_BUFFER_LOCATION;
-	command[3] = 512;
-	command[4] = CONFIG_SYS_SYS_CLK_FREQ >> 10;
-	iap_entry(command, result);
-	if (result[0] != IAP_RET_CMD_SUCCESS) {
-		printf("IAP copy failed\n");
-		return 1;
-	}
-
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag;
-	int prot;
-	int sect;
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot)
-		return ERR_PROTECTED;
-
-
-	flag = disable_interrupts();
-
-	printf ("Erasing %d sectors starting at sector %2d.\n"
-	"This make take some time ... ",
-	s_last - s_first + 1, s_first);
-
-	command[0] = IAP_CMD_PREPARE;
-	command[1] = s_first;
-	command[2] = s_last;
-	iap_entry(command, result);
-	if (result[0] != IAP_RET_CMD_SUCCESS) {
-		printf("IAP prepare failed\n");
-		return ERR_PROTECTED;
-	}
-
-	command[0] = IAP_CMD_ERASE;
-	command[1] = s_first;
-	command[2] = s_last;
-	command[3] = CONFIG_SYS_SYS_CLK_FREQ >> 10;
-	iap_entry(command, result);
-	if (result[0] != IAP_RET_CMD_SUCCESS) {
-		printf("IAP erase failed\n");
-		return ERR_PROTECTED;
-	}
-
-	if (flag)
-		enable_interrupts();
-
-	return ERR_OK;
-}
-
-int lpc2292_write_buff (flash_info_t * info, uchar * src, ulong addr,
-			ulong cnt)
-{
-	int first_copy_size;
-	int last_copy_size;
-	int first_block;
-	int last_block;
-	int nbr_mid_blocks;
-	uchar memmap_value;
-	ulong i;
-	uchar* src_org;
-	uchar* dst_org;
-	int ret = ERR_OK;
-
-	src_org = src;
-	dst_org = (uchar*)addr;
-
-	first_block = addr / 512;
-	last_block = (addr + cnt) / 512;
-	nbr_mid_blocks = last_block - first_block - 1;
-
-	first_copy_size = 512 - (addr % 512);
-	last_copy_size = (addr + cnt) % 512;
-
-	debug("\ncopy first block: (1) %lX -> %lX 0x200 bytes, "
-		"(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n",
-	(ulong)(first_block * 512),
-	(ulong)COPY_BUFFER_LOCATION,
-	(ulong)src,
-	(ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
-	first_copy_size,
-	(ulong)COPY_BUFFER_LOCATION,
-	(ulong)(first_block * 512));
-
-	/* copy first block */
-	memcpy((void*)COPY_BUFFER_LOCATION,
-		(void*)(first_block * 512), 512);
-	memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
-		src, first_copy_size);
-	lpc2292_copy_buffer_to_flash(info, first_block * 512);
-	src += first_copy_size;
-	addr += first_copy_size;
-
-	/* copy middle blocks */
-	for (i = 0; i < nbr_mid_blocks; i++) {
-		debug("copy middle block: %lX -> %lX 512 bytes, "
-		"%lX -> %lX 512 bytes\n",
-		(ulong)src,
-		(ulong)COPY_BUFFER_LOCATION,
-		(ulong)COPY_BUFFER_LOCATION,
-		(ulong)addr);
-
-		memcpy((void*)COPY_BUFFER_LOCATION, src, 512);
-		lpc2292_copy_buffer_to_flash(info, addr);
-		src += 512;
-		addr += 512;
-	}
-
-
-	if (last_copy_size > 0) {
-		debug("copy last block: (1) %lX -> %lX 0x200 bytes, "
-		"(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n",
-		(ulong)(last_block * 512),
-		(ulong)COPY_BUFFER_LOCATION,
-		(ulong)src,
-		(ulong)(COPY_BUFFER_LOCATION),
-		last_copy_size,
-		(ulong)COPY_BUFFER_LOCATION,
-		(ulong)addr);
-
-		/* copy last block */
-		memcpy((void*)COPY_BUFFER_LOCATION,
-			(void*)(last_block * 512), 512);
-		memcpy((void*)COPY_BUFFER_LOCATION,
-			src, last_copy_size);
-		lpc2292_copy_buffer_to_flash(info, addr);
-	}
-
-	/* verify write */
-	memmap_value = GET8(MEMMAP);
-
-	disable_interrupts();
-
-	PUT8(MEMMAP, 01);		/* we must make sure that initial 64
-							   bytes are taken from flash when we
-							   do the compare */
-
-	for (i = 0; i < cnt; i++) {
-		if (*dst_org != *src_org){
-			printf("Write failed. Byte %lX differs\n", i);
-			ret = ERR_PROG_ERROR;
-			break;
-		}
-		dst_org++;
-		src_org++;
-	}
-
-	PUT8(MEMMAP, memmap_value);
-	enable_interrupts();
-
-	return ret;
-}
diff --git a/arch/arm/cpu/arm720t/lpc2292/iap_entry.S b/arch/arm/cpu/arm720t/lpc2292/iap_entry.S
deleted file mode 100644
index c31d519..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/iap_entry.S
+++ /dev/null
@@ -1,7 +0,0 @@ 
-IAP_ADDRESS:	.word	0x7FFFFFF1
-
-.globl iap_entry
-iap_entry:
-	ldr	r2, IAP_ADDRESS
-	bx	r2
-	mov	pc, lr
diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc.c b/arch/arm/cpu/arm720t/lpc2292/mmc.c
deleted file mode 100644
index beaffe9..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/mmc.c
+++ /dev/null
@@ -1,131 +0,0 @@ 
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <mmc.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include <part.h>
-#include <fat.h>
-#include "mmc_hw.h"
-#include <asm/arch/spi.h>
-
-#ifdef CONFIG_MMC
-
-#undef MMC_DEBUG
-
-static block_dev_desc_t mmc_dev;
-
-/* these are filled out by a call to mmc_hw_get_parameters */
-static int hw_size;		/* in kbytes */
-static int hw_nr_sects;
-static int hw_sect_size;	/* in bytes */
-
-block_dev_desc_t * mmc_get_dev(int dev)
-{
-	return (block_dev_desc_t *)(&mmc_dev);
-}
-
-unsigned long mmc_block_read(int dev,
-			     unsigned long start,
-			     lbaint_t blkcnt,
-			     void *buffer)
-{
-	unsigned long rc = 0;
-	unsigned char *p = (unsigned char *)buffer;
-	unsigned long i;
-	unsigned long addr = start;
-
-#ifdef MMC_DEBUG
-	printf("mmc_block_read: start=%lu, blkcnt=%lu\n", start,
-		 (unsigned long)blkcnt);
-#endif
-
-	for(i = 0; i < (unsigned long)blkcnt; i++) {
-#ifdef MMC_DEBUG
-		printf("mmc_read_sector: addr=%lu, buffer=%p\n", addr, p);
-#endif
-		(void)mmc_read_sector(addr, p);
-		rc++;
-		addr++;
-		p += hw_sect_size;
-	}
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------------
- * Read hardware paramterers (sector size, size, number of sectors)
- */
-static int mmc_hw_get_parameters(void)
-{
-	unsigned char csddata[16];
-	unsigned int sizemult;
-	unsigned int size;
-
-	mmc_read_csd(csddata);
-	hw_sect_size = 1<<(csddata[5] & 0x0f);
-	size = ((csddata[6]&0x03)<<10)+(csddata[7]<<2)+(csddata[8]&0xc0);
-	sizemult = ((csddata[10] & 0x80)>>7)+((csddata[9] & 0x03)<<1);
-	hw_nr_sects = (size+1)*(1<<(sizemult+2));
-	hw_size = hw_nr_sects*hw_sect_size/1024;
-
-#ifdef MMC_DEBUG
-	printf("mmc_hw_get_parameters: hw_sect_size=%d, hw_nr_sects=%d, "
-		 "hw_size=%d\n", hw_sect_size, hw_nr_sects, hw_size);
-#endif
-
-	return 0;
-}
-
-int mmc_legacy_init(int verbose)
-{
-	int ret = -ENODEV;
-
-	if (verbose)
-		printf("mmc_legacy_init\n");
-
-	spi_init();
-	/* this meeds to be done twice */
-	mmc_hw_init();
-	udelay(1000);
-	mmc_hw_init();
-
-	mmc_hw_get_parameters();
-
-	mmc_dev.if_type = IF_TYPE_MMC;
-	mmc_dev.part_type = PART_TYPE_DOS;
-	mmc_dev.dev = 0;
-	mmc_dev.lun = 0;
-	mmc_dev.type = 0;
-	mmc_dev.blksz = hw_sect_size;
-	mmc_dev.lba = hw_nr_sects;
-	sprintf((char*)mmc_dev.vendor, "Unknown vendor");
-	sprintf((char*)mmc_dev.product, "Unknown product");
-	sprintf((char*)mmc_dev.revision, "N/A");
-	mmc_dev.removable = 0;	/* should be true??? */
-	mmc_dev.block_read = mmc_block_read;
-
-	fat_register_device(&mmc_dev, 1);
-
-	ret = 0;
-
-	return ret;
-}
-
-#endif /* CONFIG_MMC */
diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c b/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c
deleted file mode 100644
index bd6a5b1..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c
+++ /dev/null
@@ -1,233 +0,0 @@ 
-/*
-    This code was original written by Ulrich Radig and modified by
-    Embedded Artists AB (www.embeddedartists.com).
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spi.h>
-
-#define MMC_Enable() PUT32(IO1CLR, 1l << 22)
-#define MMC_Disable() PUT32(IO1SET, 1l << 22)
-#define mmc_spi_cfg() spi_set_clock(8); spi_set_cfg(0, 1, 0);
-
-static unsigned char Write_Command_MMC (unsigned char *CMD);
-static void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer,
-		    unsigned short int Bytes);
-
-/* initialize the hardware */
-int mmc_hw_init(void)
-{
-	unsigned long a;
-	unsigned short int Timeout = 0;
-	unsigned char b;
-	unsigned char CMD[] = {0x40, 0x00, 0x00, 0x00, 0x00, 0x95};
-
-	/* set-up GPIO and SPI */
-	(*((volatile unsigned long *)PINSEL2)) &= ~(1l << 3); /* clear bit 3 */
-	(*((volatile unsigned long *)IO1DIR)) |= (1l << 22); /* set bit 22 (output) */
-
-	MMC_Disable();
-
-	spi_lock();
-	spi_set_clock(248);
-	spi_set_cfg(0, 1, 0);
-	MMC_Enable();
-
-	/* waste some time */
-	for(a=0; a < 20000; a++)
-		asm("nop");
-
-	/* Put the MMC/SD-card into SPI-mode */
-	for (b = 0; b < 10; b++) /* Sends min 74+ clocks to the MMC/SD-card */
-		spi_write(0xff);
-
-	/* Sends command CMD0 to MMC/SD-card */
-	while (Write_Command_MMC(CMD) != 1) {
-		if (Timeout++ > 200) {
-			MMC_Disable();
-			spi_unlock();
-			return(1); /* Abort with command 1 (return 1) */
-		}
-	}
-	/* Sends Command CMD1 an MMC/SD-card */
-	Timeout = 0;
-	CMD[0] = 0x41;/* Command 1 */
-	CMD[5] = 0xFF;
-
-	while (Write_Command_MMC(CMD) != 0) {
-		if (Timeout++ > 200) {
-			MMC_Disable();
-			spi_unlock();
-			return (2); /* Abort with command 2 (return 2) */
-		}
-	}
-
-	MMC_Disable();
-	spi_unlock();
-
-	return 0;
-}
-
-/* ############################################################################
-   Sends a command to the MMC/SD-card
-   ######################################################################### */
-static unsigned char Write_Command_MMC (unsigned char *CMD)
-{
-	unsigned char a, tmp = 0xff;
-	unsigned short int Timeout = 0;
-
-	MMC_Disable();
-	spi_write(0xFF);
-	MMC_Enable();
-
-	for (a = 0; a < 0x06; a++)
-		spi_write(*CMD++);
-
-	while (tmp == 0xff) {
-		tmp = spi_read();
-		if (Timeout++ > 5000)
-		  break;
-	}
-
-	return (tmp);
-}
-
-/* ############################################################################
-   Routine to read the CID register from the MMC/SD-card (16 bytes)
-   ######################################################################### */
-void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, unsigned short
-	int Bytes)
-{
-	unsigned short int a;
-
-	spi_lock();
-	mmc_spi_cfg();
-	MMC_Enable();
-
-	if (Write_Command_MMC(CMD) != 0) {
-		MMC_Disable();
-		spi_unlock();
-		return;
-	}
-
-	while (spi_read() != 0xfe) {};
-	for (a = 0; a < Bytes; a++)
-		*Buffer++ = spi_read();
-
-	/* Read the CRC-byte */
-	spi_read(); /* CRC - byte is discarded */
-	spi_read(); /* CRC - byte is discarded */
-	/* set MMC_Chip_Select to high (MMC/SD-card Inaktiv) */
-	MMC_Disable();
-	spi_unlock();
-
-	return;
-}
-
-/* ############################################################################
-   Routine to read a block (512 bytes) from the MMC/SD-card
-   ######################################################################### */
-unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer)
-{
-	/* Command 16 to read aBlocks from the MMC/SD - caed */
-	unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF};
-
-	/* The address on the MMC/SD-card is in bytes,
-	addr is transformed from blocks to bytes and the result is
-	placed into the command */
-
-	addr = addr << 9; /* addr = addr * 512 */
-
-	CMD[1] = ((addr & 0xFF000000) >> 24);
-	CMD[2] = ((addr & 0x00FF0000) >> 16);
-	CMD[3] = ((addr & 0x0000FF00) >> 8 );
-
-	MMC_Read_Block(CMD, Buffer, 512);
-
-	return (0);
-}
-
-/* ############################################################################
-   Routine to write a block (512 byte) to the MMC/SD-card
-   ######################################################################### */
-unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer)
-{
-	unsigned char tmp, a;
-	unsigned short int b;
-	/* Command 24 to write a block to the MMC/SD - card */
-	unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF};
-
-	/* The address on the MMC/SD-card is in bytes,
-	addr is transformed from blocks to bytes and the result is
-	placed into the command */
-
-	addr = addr << 9; /* addr = addr * 512 */
-
-	CMD[1] = ((addr & 0xFF000000) >> 24);
-	CMD[2] = ((addr & 0x00FF0000) >> 16);
-	CMD[3] = ((addr & 0x0000FF00) >> 8 );
-
-	spi_lock();
-	mmc_spi_cfg();
-	MMC_Enable();
-
-	/* Send command CMD24 to the MMC/SD-card (Write 1 Block/512 Bytes) */
-	tmp = Write_Command_MMC(CMD);
-	if (tmp != 0) {
-		MMC_Disable();
-		spi_unlock();
-		return(tmp);
-	}
-
-	/* Do a short delay and send a clock-pulse to the MMC/SD-card */
-	for (a = 0; a < 100; a++)
-		spi_read();
-
-	/* Send a start byte to the MMC/SD-card */
-	spi_write(0xFE);
-
-	/* Write the block (512 bytes) to the MMC/SD-card */
-	for (b = 0; b < 512; b++)
-		spi_write(*Buffer++);
-
-	/* write the CRC-Byte */
-	spi_write(0xFF); /* write a dummy CRC */
-	spi_write(0xFF); /* CRC code is not used */
-
-	/* Wait for MMC/SD-card busy */
-	while (spi_read() != 0xff) {};
-
-	/* set MMC_Chip_Select to high (MMC/SD-card inactive) */
-	MMC_Disable();
-	spi_unlock();
-	return (0);
-}
-
-/* #########################################################################
-   Routine to read the CSD register from the MMC/SD-card (16 bytes)
-   ######################################################################### */
-unsigned char mmc_read_csd (unsigned char *Buffer)
-{
-	/* Command to read the CSD register */
-	unsigned char CMD[] = {0x49, 0x00, 0x00, 0x00, 0x00, 0xFF};
-
-	MMC_Read_Block(CMD, Buffer, 16);
-
-	return (0);
-}
diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.h b/arch/arm/cpu/arm720t/lpc2292/mmc_hw.h
deleted file mode 100644
index 3687dbf..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.h
+++ /dev/null
@@ -1,29 +0,0 @@ 
-/*
-    This module implements a linux character device driver for the 24c256 chip.
-    Copyright (C) 2006  Embedded Artists AB (www.embeddedartists.com)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#ifndef _MMC_HW_
-#define _MMC_HW_
-
-unsigned char mmc_read_csd(unsigned char *Buffer);
-unsigned char mmc_read_sector (unsigned long addr,
-			       unsigned char *Buffer);
-unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer);
-int mmc_hw_init(void);
-
-#endif /* _MMC_HW_ */
diff --git a/arch/arm/cpu/arm720t/lpc2292/spi.c b/arch/arm/cpu/arm720t/lpc2292/spi.c
deleted file mode 100644
index d296bda..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/spi.c
+++ /dev/null
@@ -1,40 +0,0 @@ 
-/*
-    This module implements an interface to the SPI on the lpc22xx.
-    Copyright (C) 2006  Embedded Artists AB (www.embeddedartists.com)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spi.h>
-
-unsigned long spi_flags;
-unsigned char spi_idle = 0x00;
-
-int spi_init(void)
-{
-	unsigned long pinsel0_value;
-
-	/* activate spi pins */
-	pinsel0_value = GET32(PINSEL0);
-	pinsel0_value &= ~(0xFFl << 8);
-	pinsel0_value |= (0x55l << 8);
-	PUT32(PINSEL0, pinsel0_value);
-
-	return 0;
-}
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index 2f914e9..0daf848 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -43,11 +43,7 @@  _start: b	reset
 	ldr	pc, _software_interrupt
 	ldr	pc, _prefetch_abort
 	ldr	pc, _data_abort
-#ifdef CONFIG_LPC2292
-	.word	0xB4405F76 /* 2's complement of the checksum of the vectors */
-#else
 	ldr	pc, _not_used
-#endif
 	ldr	pc, _irq
 	ldr	pc, _fiq
 
@@ -151,10 +147,6 @@  reset:
 	bl	cpu_init_crit
 #endif
 
-#ifdef CONFIG_LPC2292
-	bl	lowlevel_init
-#endif
-
 /* Set stackpointer in internal RAM to call board_init_f */
 call_board_init_f:
 	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
@@ -291,16 +283,6 @@  _dynsym_start_ofs:
  *************************************************************************
  */
 
-#if defined(CONFIG_LPC2292)
-PLLCFG_ADR:	.word	PLLCFG
-PLLFEED_ADR:	.word	PLLFEED
-PLLCON_ADR:	.word	PLLCON
-PLLSTAT_ADR:	.word	PLLSTAT
-VPBDIV_ADR:	.word	VPBDIV
-MEMMAP_ADR:	.word	MEMMAP
-
-#endif
-
 cpu_init_crit:
 #if defined(CONFIG_NETARM)
 	/*
@@ -371,50 +353,6 @@  cpu_init_crit:
 
 #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
 	/* No specific initialisation for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
-	/* Set-up PLL */
-	mov	r3, #0xAA
-	mov	r4, #0x55
-	/* First disconnect and disable the PLL */
-	ldr	r0, PLLCON_ADR
-	mov	r1, #0x00
-	str	r1, [r0]
-	ldr	r0, PLLFEED_ADR /* start feed sequence */
-	str	r3, [r0]
-	str	r4, [r0]	/* feed sequence done */
-	/* Set new M and P values */
-	ldr	r0, PLLCFG_ADR
-	mov	r1, #0x23	/* M=4 and P=2 */
-	str	r1, [r0]
-	ldr	r0, PLLFEED_ADR /* start feed sequence */
-	str	r3, [r0]
-	str	r4, [r0]	/* feed sequence done */
-	/* Then enable the PLL */
-	ldr	r0, PLLCON_ADR
-	mov	r1, #0x01	/* PLL enable bit */
-	str	r1, [r0]
-	ldr	r0, PLLFEED_ADR /* start feed sequence */
-	str	r3, [r0]
-	str	r4, [r0]	/* feed sequence done */
-	/* Wait for the lock */
-	ldr	r0, PLLSTAT_ADR
-	mov	r1, #0x400	/* lock bit */
-lock_loop:
-	ldr	r2, [r0]
-	and	r2, r1, r2
-	cmp	r2, #0
-	beq	lock_loop
-	/* And finally connect the PLL */
-	ldr	r0, PLLCON_ADR
-	mov	r1, #0x03	/* PLL enable bit and connect bit */
-	str	r1, [r0]
-	ldr	r0, PLLFEED_ADR /* start feed sequence */
-	str	r3, [r0]
-	str	r4, [r0]	/* feed sequence done */
-	/* Set-up VPBDIV register */
-	ldr	r0, VPBDIV_ADR
-	mov	r1, #0x01	/* VPB clock is same as process clock */
-	str	r1, [r0]
 #elif defined(CONFIG_TEGRA)
 	/* No cpu_init_crit for tegra as yet */
 #else
@@ -432,7 +370,7 @@  lock_loop:
 	str	r1, [r0]
 #endif
 
-#if !defined(CONFIG_LPC2292) && !defined(CONFIG_TEGRA)
+#if !defined(CONFIG_TEGRA)
 	mov	ip, lr
 	/*
 	 * before relocating, we have to setup RAM timing
@@ -636,11 +574,6 @@  reset_cpu:
  * on external peripherals such as watchdog timers, etc. */
 #elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
 	/* No specific reset actions for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
-	.align	5
-.globl reset_cpu
-reset_cpu:
-	mov	pc, r0
 #elif defined(CONFIG_TEGRA)
 	/* No specific reset actions for tegra as yet */
 #else
diff --git a/arch/arm/include/asm/arch-lpc2292/hardware.h b/arch/arm/include/asm/arch-lpc2292/hardware.h
deleted file mode 100644
index 5e227e3..0000000
--- a/arch/arm/include/asm/arch-lpc2292/hardware.h
+++ /dev/null
@@ -1,33 +0,0 @@ 
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#if defined(CONFIG_LPC2292)
-#include <asm/arch-lpc2292/lpc2292_registers.h>
-#else
-#error No hardware file defined for this configuration
-#endif
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h b/arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h
deleted file mode 100644
index 5715f3e..0000000
--- a/arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h
+++ /dev/null
@@ -1,225 +0,0 @@ 
-#ifndef __LPC2292_REGISTERS_H
-#define __LPC2292_REGISTERS_H
-
-#include <config.h>
-
-/* Macros for reading/writing registers */
-#define PUT8(reg, value) (*(volatile unsigned char*)(reg) = (value))
-#define PUT16(reg, value) (*(volatile unsigned short*)(reg) = (value))
-#define PUT32(reg, value) (*(volatile unsigned int*)(reg) = (value))
-#define GET8(reg) (*(volatile unsigned char*)(reg))
-#define GET16(reg) (*(volatile unsigned short*)(reg))
-#define GET32(reg) (*(volatile unsigned int*)(reg))
-
-/* External Memory Controller */
-
-#define BCFG0 0xFFE00000	/* 32-bits */
-#define BCFG1 0xFFE00004	/* 32-bits */
-#define BCFG2 0xFFE00008	/* 32-bits */
-#define BCFG3 0xFFE0000c	/* 32-bits */
-
-/* System Control Block */
-
-#define EXTINT   0xE01FC140
-#define EXTWAKE  0xE01FC144
-#define EXTMODE  0xE01FC148
-#define EXTPOLAR 0xE01FC14C
-#define MEMMAP   0xE01FC040
-#define PLLCON   0xE01FC080
-#define PLLCFG   0xE01FC084
-#define PLLSTAT  0xE01FC088
-#define PLLFEED  0xE01FC08C
-#define PCON     0xE01FC0C0
-#define PCONP    0xE01FC0C4
-#define VPBDIV   0xE01FC100
-
-/* Memory Acceleration Module */
-
-#define MAMCR  0xE01FC000
-#define MAMTIM 0xE01FC004
-
-/* Vectored Interrupt Controller */
-
-#define VICIRQStatus    0xFFFFF000
-#define VICFIQStatus    0xFFFFF004
-#define VICRawIntr      0xFFFFF008
-#define VICIntSelect    0xFFFFF00C
-#define VICIntEnable    0xFFFFF010
-#define VICIntEnClr     0xFFFFF014
-#define VICSoftInt      0xFFFFF018
-#define VICSoftIntClear 0xFFFFF01C
-#define VICProtection   0xFFFFF020
-#define VICVectAddr     0xFFFFF030
-#define VICDefVectAddr  0xFFFFF034
-#define VICVectAddr0    0xFFFFF100
-#define VICVectAddr1    0xFFFFF104
-#define VICVectAddr2    0xFFFFF108
-#define VICVectAddr3    0xFFFFF10C
-#define VICVectAddr4    0xFFFFF110
-#define VICVectAddr5    0xFFFFF114
-#define VICVectAddr6    0xFFFFF118
-#define VICVectAddr7    0xFFFFF11C
-#define VICVectAddr8    0xFFFFF120
-#define VICVectAddr9    0xFFFFF124
-#define VICVectAddr10   0xFFFFF128
-#define VICVectAddr11   0xFFFFF12C
-#define VICVectAddr12   0xFFFFF130
-#define VICVectAddr13   0xFFFFF134
-#define VICVectAddr14   0xFFFFF138
-#define VICVectAddr15   0xFFFFF13C
-#define VICVectCntl0    0xFFFFF200
-#define VICVectCntl1	0xFFFFF204
-#define VICVectCntl2	0xFFFFF208
-#define VICVectCntl3	0xFFFFF20C
-#define VICVectCntl4	0xFFFFF210
-#define VICVectCntl5	0xFFFFF214
-#define VICVectCntl6	0xFFFFF218
-#define VICVectCntl7	0xFFFFF21C
-#define VICVectCntl8	0xFFFFF220
-#define VICVectCntl9	0xFFFFF224
-#define VICVectCntl10	0xFFFFF228
-#define VICVectCntl11	0xFFFFF22C
-#define VICVectCntl12	0xFFFFF230
-#define VICVectCntl13	0xFFFFF234
-#define VICVectCntl14	0xFFFFF238
-#define VICVectCntl15	0xFFFFF23C
-
-/* Pin connect block */
-
-#define PINSEL0 0xE002C000	/* 32 bits */
-#define PINSEL1 0xE002C004	/* 32 bits */
-#define PINSEL2 0xE002C014	/* 32 bits */
-
-/* GPIO */
-
-#define IO0PIN 0xE0028000
-#define IO0SET 0xE0028004
-#define IO0DIR 0xE0028008
-#define IO0CLR 0xE002800C
-#define IO1PIN 0xE0028010
-#define IO1SET 0xE0028014
-#define IO1DIR 0xE0028018
-#define IO1CLR 0xE002801C
-#define IO2PIN 0xE0028020
-#define IO2SET 0xE0028024
-#define IO2DIR 0xE0028028
-#define IO2CLR 0xE002802C
-#define IO3PIN 0xE0028030
-#define IO3SET 0xE0028034
-#define IO3DIR 0xE0028038
-#define IO3CLR 0xE002803C
-
-/* Uarts */
-
-#define U0RBR 0xE000C000
-#define U0THR 0xE000C000
-#define U0IER 0xE000C004
-#define U0IIR 0xE000C008
-#define U0FCR 0xE000C008
-#define U0LCR 0xE000C00C
-#define U0LSR 0xE000C014
-#define U0SCR 0xE000C01C
-#define U0DLL 0xE000C000
-#define U0DLM 0xE000C004
-
-#define U1RBR 0xE0010000
-#define U1THR 0xE0010000
-#define U1IER 0xE0010004
-#define U1IIR 0xE0010008
-#define U1FCR 0xE0010008
-#define U1LCR 0xE001000C
-#define U1MCR 0xE0010010
-#define U1LSR 0xE0010014
-#define U1MSR 0xE0010018
-#define U1SCR 0xE001001C
-#define U1DLL 0xE0010000
-#define U1DLM 0xE0010004
-
-/* I2C */
-
-#define I2CONSET 0xE001C000
-#define I2STAT   0xE001C004
-#define I2DAT    0xE001C008
-#define I2ADR    0xE001C00C
-#define I2SCLH   0xE001C010
-#define I2SCLL   0xE001C014
-#define I2CONCLR 0xE001C018
-
-/* SPI */
-
-#define S0SPCR  0xE0020000
-#define S0SPSR  0xE0020004
-#define S0SPDR  0xE0020008
-#define S0SPCCR 0xE002000C
-#define S0SPINT 0xE002001C
-
-#define S1SPCR  0xE0030000
-#define S1SPSR  0xE0030004
-#define S1SPDR  0xE0030008
-#define S1SPCCR 0xE003000C
-#define S1SPINT 0xE003001C
-
-/* CAN controller */
-
-/* skip for now */
-
-/* Timers */
-
-#define T0IR  0xE0004000
-#define T0TCR 0xE0004004
-#define T0TC  0xE0004008
-#define T0PR  0xE000400C
-#define T0PC  0xE0004010
-#define T0MCR 0xE0004014
-#define T0MR0 0xE0004018
-#define T0MR1 0xE000401C
-#define T0MR2 0xE0004020
-#define T0MR3 0xE0004024
-#define T0CCR 0xE0004028
-#define T0CR0 0xE000402C
-#define T0CR1 0xE0004030
-#define T0CR2 0xE0004034
-#define T0CR3 0xE0004038
-#define T0EMR 0xE000403C
-
-#define T1IR  0xE0008000
-#define T1TCR 0xE0008004
-#define T1TC  0xE0008008
-#define T1PR  0xE000800C
-#define T1PC  0xE0008010
-#define T1MCR 0xE0008014
-#define T1MR0 0xE0008018
-#define T1MR1 0xE000801C
-#define T1MR2 0xE0008020
-#define T1MR3 0xE0008024
-#define T1CCR 0xE0008028
-#define T1CR0 0xE000802C
-#define T1CR1 0xE0008030
-#define T1CR2 0xE0008034
-#define T1CR3 0xE0008038
-#define T1EMR 0xE000803C
-
-/* PWM */
-
-/* skip for now */
-
-/* A/D converter */
-
-/* skip for now */
-
-/* Real Time Clock */
-
-/* skip for now */
-
-/* Watchdog */
-
-#define WDMOD  0xE0000000
-#define WDTC   0xE0000004
-#define WDFEED 0xE0000008
-#define WDTV   0xE000000C
-
-/* EmbeddedICE LOGIC */
-
-/* skip for now */
-
-#endif
diff --git a/arch/arm/include/asm/arch-lpc2292/spi.h b/arch/arm/include/asm/arch-lpc2292/spi.h
deleted file mode 100644
index 6ae66e8..0000000
--- a/arch/arm/include/asm/arch-lpc2292/spi.h
+++ /dev/null
@@ -1,82 +0,0 @@ 
-/*
-    This file defines the interface to the lpc22xx SPI module.
-    Copyright (C) 2006  Embedded Artists AB (www.embeddedartists.com)
-
-    This file may be included in software not adhering to the GPL.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#ifndef SPI_H
-#define SPI_H
-
-#include <config.h>
-#include <common.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-
-#define SPIF 0x80
-
-#define spi_lock() disable_interrupts();
-#define spi_unlock() enable_interrupts();
-
-extern unsigned long spi_flags;
-extern unsigned char spi_idle;
-
-int spi_init(void);
-
-static inline unsigned char spi_read(void)
-{
-	unsigned char b;
-
-	PUT8(S0SPDR, spi_idle);
-	while (!(GET8(S0SPSR) & SPIF));
-	b = GET8(S0SPDR);
-
-	return b;
-}
-
-static inline void spi_write(unsigned char b)
-{
-	PUT8(S0SPDR, b);
-	while (!(GET8(S0SPSR) & SPIF));
-	GET8(S0SPDR);		/* this will clear the SPIF bit */
-}
-
-static inline void spi_set_clock(unsigned char clk_value)
-{
-	PUT8(S0SPCCR, clk_value);
-}
-
-static inline void spi_set_cfg(unsigned char phase,
-			       unsigned char polarity,
-			       unsigned char lsbf)
-{
-	unsigned char v = 0x20;	/* master bit set */
-
-	if (phase)
-		v |= 0x08;			/* set phase bit */
-	if (polarity) {
-		v |= 0x10;			/* set polarity bit */
-		spi_idle = 0xFF;
-	} else {
-		spi_idle = 0x00;
-	}
-	if (lsbf)
-		v |= 0x40;			/* set lsbf bit */
-
-	PUT8(S0SPCR, v);
-}
-#endif /* SPI_H */
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 36c6114..1595c07 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -41,9 +41,6 @@ 
 #ifdef	CONFIG_IXP425			/* only valid for IXP425 */
 #include <asm/arch/ixp425.h>
 #endif
-#ifdef CONFIG_LPC2292
-#include <asm/arch/hardware.h>
-#endif
 #if defined(CONFIG_MPC852T) || defined(CONFIG_MPC866)
 #include <asm/io.h>
 #endif
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 65d0f23..cae15f9 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -42,7 +42,6 @@  COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o
 COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
 COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o
 COBJS-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o
-COBJS-$(CONFIG_LPC2292_SERIAL) += serial_lpc2292.o
 COBJS-$(CONFIG_LH7A40X_SERIAL) += serial_lh7a40x.o
 COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
 COBJS-$(CONFIG_MXC_UART) += serial_mxc.o
diff --git a/drivers/serial/serial_lpc2292.c b/drivers/serial/serial_lpc2292.c
deleted file mode 100644
index e3a60b6..0000000
--- a/drivers/serial/serial_lpc2292.c
+++ /dev/null
@@ -1,104 +0,0 @@ 
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void serial_setbrg (void)
-{
-	unsigned short divisor = 0;
-
-	switch (gd->baudrate) {
-	case   1200:	divisor = 3072;	break;
-	case   9600:	divisor =  384;	break;
-	case  19200:	divisor =  192;	break;
-	case  38400:	divisor =   96;	break;
-	case  57600:	divisor =   64;	break;
-	case 115200:	divisor =   32;	break;
-	default:	hang ();	break;
-	}
-
-	/* init serial UART0 */
-	PUT8(U0LCR, 0);
-	PUT8(U0IER, 0);
-	PUT8(U0LCR, 0x80);	/* DLAB=1 */
-	PUT8(U0DLL, (unsigned char)(divisor & 0x00FF));
-	PUT8(U0DLM, (unsigned char)(divisor >> 8));
-	PUT8(U0LCR, 0x03);	/* 8N1, DLAB=0  */
-	PUT8(U0FCR, 1);		/* Enable RX and TX FIFOs */
-}
-
-int serial_init (void)
-{
-	unsigned long pinsel0;
-
-	serial_setbrg ();
-
-	pinsel0 = GET32(PINSEL0);
-	pinsel0 &= ~(0x00000003);
-	pinsel0 |= 5;
-	PUT32(PINSEL0, pinsel0);
-
-	return (0);
-}
-
-void serial_putc (const char c)
-{
-	if (c == '\n')
-	{
-		while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */
-		PUT8(U0THR, '\r');
-	}
-
-	while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */
-	PUT8(U0THR, c);
-}
-
-int serial_getc (void)
-{
-	while((GET8(U0LSR) & 1) == 0);
-	return GET8(U0RBR);
-}
-
-void
-serial_puts (const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
-/* Test if there is a byte to read */
-int serial_tstc (void)
-{
-	return (GET8(U0LSR) & 1);
-}
diff --git a/include/flash.h b/include/flash.h
index 6d70bdd..7db599e 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -348,7 +348,6 @@  extern flash_info_t *flash_get_info(ulong base);
 
 #define TOSH_ID_FVT160	0xC2		/* TC58FVT160 ID (16 M, top )		*/
 #define TOSH_ID_FVB160	0x43		/* TC58FVT160 ID (16 M, bottom )	*/
-#define PHILIPS_LPC2292 0x0401FF13  /* LPC2292 internal FLASH			*/
 #define NUMONYX_256MBIT	0x8922		/* Numonyx P33/30 256MBit 65nm	*/
 
 /*-----------------------------------------------------------------------