@@ -326,28 +326,40 @@ static u32 get_ipg_per_clk(void)
return freq / ((pred1 + 1) * (pred2 + 1) * (podf + 1));
}
-/*
- * Get the rate of uart clk.
- */
-static u32 get_uart_clk(void)
+/* Get the output clock rate of a standard PLL MUX for peripherals. */
+static u32 get_standard_pll_sel_clk(u32 clk_sel)
{
- unsigned int freq, reg, pred, podf;
+ u32 freq;
- reg = readl(&mxc_ccm->cscmr1);
- switch (MXC_CCM_CSCMR1_UART_CLK_SEL_RD(reg)) {
- case 0x0:
+ switch (clk_sel & 0x3) {
+ case 0:
freq = decode_pll(mxc_plls[PLL1_CLOCK], MXC_HCLK);
break;
- case 0x1:
+ case 1:
freq = decode_pll(mxc_plls[PLL2_CLOCK], MXC_HCLK);
break;
- case 0x2:
+ case 2:
freq = decode_pll(mxc_plls[PLL3_CLOCK], MXC_HCLK);
break;
- default:
- return 66500000;
+ case 3:
+ freq = get_lp_apm();
+ break;
}
+ return freq;
+}
+
+/*
+ * Get the rate of uart clk.
+ */
+static u32 get_uart_clk(void)
+{
+ unsigned int clk_sel, freq, reg, pred, podf;
+
+ reg = readl(&mxc_ccm->cscmr1);
+ clk_sel = MXC_CCM_CSCMR1_UART_CLK_SEL_RD(reg);
+ freq = get_standard_pll_sel_clk(clk_sel);
+
reg = readl(&mxc_ccm->cscdr1);
pred = MXC_CCM_CSCDR1_UART_CLK_PRED_RD(reg);
podf = MXC_CCM_CSCDR1_UART_CLK_PODF_RD(reg);
This function returned 66500000 instead of the correct lp_apm clock frequency if the CCM.CSCMR1.uart_clk_sel mux is set to 3. This patch fixes this issue by introducing the get_standard_pll_sel_clk() function that will be used by future patches to handle identical muxes used by many other clocks. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> --- This patch supersedes http://patchwork.ozlabs.org/patch/177408/ . Changes for v2: - Consequences from the previous cleanup patches. - Add detailed description. .../arch/arm/cpu/armv7/mx5/clock.c | 36 +++++++++++++------- 1 file changed, 24 insertions(+), 12 deletions(-)