[v2,3/4] serial: add windows inf file for the pci card to docs

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 docs/qemupciserial.inf |  107 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 107 insertions(+), 0 deletions(-)
 create mode 100644 docs/qemupciserial.inf

On Wed, Sep 26, 2012 at 12:14 PM, Gerd Hoffmann <kraxel@redhat.com> wrote:
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
> ---
>  docs/qemupciserial.inf |  107 ++++++++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 107 insertions(+), 0 deletions(-)
>  create mode 100644 docs/qemupciserial.inf
>
> diff --git a/docs/qemupciserial.inf b/docs/qemupciserial.inf
> new file mode 100644
> index 0000000..905a929
> --- /dev/null
> +++ b/docs/qemupciserial.inf
> @@ -0,0 +1,107 @@
> +; qemupciserial.inf for qemu, based on MSPORTS.INF

QEMU

> +
> +; The driver itself is shipped with windows (serial.sys).  This is

Windows

> +; just a inf file to tell windows which pci id the serial pci card
> +; emulated by qemu has, and to apply a name tag to it which windows
> +; will show in the device manager.
> +
> +; Installing the driver: Go to device manager.  You should find a "pci
> +; serial card" tagged with a yellow question mark.  Open properties.
> +; Pick "update driver".  Then "select driver manually".  Pick "Ports
> +; (Com+Lpt)" from the list.  Click "Have a disk".  Select this file.
> +; Procedure may vary a bit depending on the windows version.
> +
> +[Version]
> +Signature="$CHICAGO$"
> +Class=Ports
> +ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
> +Provider=%QEMU%
> +DriverVer=09/24/2012,1.3.0
> +
> +[SourceDisksNames]
> +3426=windows cd
> +
> +[SourceDisksFiles]
> +serial.sys             = 3426
> +serenum.sys            = 3426
> +
> +[DestinationDirs]
> +DefaultDestDir  = 11        ;LDID_SYS
> +ComPort.NT.Copy = 12        ;DIRID_DRIVERS
> +SerialEnumerator.NT.Copy=12 ;DIRID_DRIVERS
> +
> +; Drivers
> +;----------------------------------------------------------
> +[Manufacturer]
> +%QEMU%=QEMU,NTx86
> +
> +[QEMU.NTx86]
> +%QEMU-PCI_SERIAL.DeviceDesc% = ComPort, "PCI\VEN_1b36&DEV_0002&CC_0700"
> +
> +; COM sections
> +;----------------------------------------------------------
> +[ComPort.AddReg]
> +HKR,,PortSubClass,1,01
> +
> +[ComPort.NT]
> +AddReg=ComPort.AddReg, ComPort.NT.AddReg
> +LogConfig=caa
> +SyssetupPnPFlags = 1
> +
> +[ComPort.NT.HW]
> +AddReg=ComPort.NT.HW.AddReg
> +
> +[ComPort.NT.AddReg]
> +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
> +
> +[ComPort.NT.HW.AddReg]
> +HKR,,"UpperFilters",0x00010000,"serenum"
> +
> +;-------------- Service installation
> +; Port Driver (function driver for this device)
> +[ComPort.NT.Services]
> +AddService = Serial, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst
> +AddService = Serenum,,Serenum_Service_Inst
> +
> +; -------------- Serial Port Driver install sections
> +[Serial_Service_Inst]
> +DisplayName    = %Serial.SVCDESC%
> +ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
> +StartType      = 1               ; SERVICE_SYSTEM_START (this driver may do detection)
> +ErrorControl   = 0               ; SERVICE_ERROR_IGNORE
> +ServiceBinary  = %12%\serial.sys
> +LoadOrderGroup = Extended base
> +
> +; -------------- Serenum Driver install section
> +[Serenum_Service_Inst]
> +DisplayName    = %Serenum.SVCDESC%
> +ServiceType    = 1               ; SERVICE_KERNEL_DRIVER
> +StartType      = 3               ; SERVICE_DEMAND_START
> +ErrorControl   = 1               ; SERVICE_ERROR_NORMAL
> +ServiceBinary  = %12%\serenum.sys
> +LoadOrderGroup = PNP Filter
> +
> +[Serial_EventLog_Inst]
> +AddReg = Serial_EventLog_AddReg
> +
> +[Serial_EventLog_AddReg]
> +HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\serial.sys"
> +HKR,,TypesSupported,0x00010001,7
> +
> +; The following sections are COM port resource configs.
> +; Section name format means:
> +; Char 1 = c (COM port)
> +; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any)
> +; Char 3 = IRQ config: #, a (any)
> +
> +[caa]                   ; Any base, any IRQ
> +ConfigPriority=HARDRECONFIG
> +IOConfig=8@100-ffff%fff8(3ff::)
> +IRQConfig=S:3,4,5,7,9,10,11,12,14,15
> +
> +[Strings]
> +QEMU="QEMU"
> +QEMU-PCI_SERIAL.DeviceDesc="QEMU Serial PCI Card"
> +
> +Serial.SVCDESC   = "Serial port driver"
> +Serenum.SVCDESC = "Serenum Filter Driver"
> --
> 1.7.1
>
>