@@ -19,6 +19,8 @@
#define S35390A_CMD_STATUS1 0
#define S35390A_CMD_STATUS2 1
#define S35390A_CMD_TIME1 2
+#define S35390A_CMD_TIME2 3
+#define S35390A_CMD_INT2_REG1 5
#define S35390A_BYTE_YEAR 0
#define S35390A_BYTE_MONTH 1
@@ -28,12 +30,23 @@
#define S35390A_BYTE_MINS 5
#define S35390A_BYTE_SECS 6
+#define S35390A_ALRM_BYTE_WDAY 0
+#define S35390A_ALRM_BYTE_HOURS 1
+#define S35390A_ALRM_BYTE_MINS 2
+
#define S35390A_FLAG_POC 0x01
#define S35390A_FLAG_BLD 0x02
#define S35390A_FLAG_24H 0x40
#define S35390A_FLAG_RESET 0x80
#define S35390A_FLAG_TEST 0x01
+#define S35390A_INT2_MODE_MASK 0xF0
+
+#define S35390A_INT2_MODE_NOINTR 0x00
+#define S35390A_INT2_MODE_FREQ 0x10
+#define S35390A_INT2_MODE_ALARM 0x40
+#define S35390A_INT2_MODE_PMIN_EDG 0x20
+
static const struct i2c_device_id s35390a_id[] = {
{ "s35390a", 0 },
{ }
@@ -184,6 +197,104 @@ static int s35390a_get_datetime(struct i2c_client
*client, struct rtc_time *tm)
return rtc_valid_tm(tm);
}
+static int s35390a_set_alarm(struct i2c_client *client, struct
rtc_wkalrm *alm)
+{
+ struct s35390a *s35390a = i2c_get_clientdata(client);
+ char buf[3], sts = 0;
+ int err, i;
+
+ dev_dbg(&client->dev, "%s: alm is secs=%d, mins=%d, hours=%d
mday=%d, "\
+ "mon=%d, year=%d, wday=%d\n", __func__, alm->time.tm_sec,
+ alm->time.tm_min, alm->time.tm_hour, alm->time.tm_mday,
+ alm->time.tm_mon, alm->time.tm_year, alm->time.tm_wday);
+
+ /* disable interrupt */
+ err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
+ if (err < 0)
+ return err;
+
+ /* clear pending interrupt, if any */
+ err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS1, &sts, sizeof(sts));
+ if (err < 0)
+ return err;
+
+ if (alm->enabled)
+ sts = S35390A_INT2_MODE_ALARM;
+ else
+ sts = S35390A_INT2_MODE_NOINTR;
+
+ /* This chip expects the bits of each byte to be in reverse order */
+ sts = bitrev8(sts);
+
+ /* set interupt mode*/
+ err = s35390a_set_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
+ if (err < 0)
+ return err;
+
+ if (alm->time.tm_wday != -1)
+ buf[S35390A_ALRM_BYTE_WDAY] = bin2bcd(alm->time.tm_wday) | 0x80;
+
+ buf[S35390A_ALRM_BYTE_HOURS] = s35390a_hr2reg(s35390a,
+ alm->time.tm_hour) | 0x80;
+ buf[S35390A_ALRM_BYTE_MINS] = bin2bcd(alm->time.tm_min) | 0x80;
+
+ if (alm->time.tm_hour >= 12)
+ buf[S35390A_ALRM_BYTE_HOURS] |= 0x40;
+
+ for (i = 0; i < 3; ++i)
+ buf[i] = bitrev8(buf[i]);
+
+ err = s35390a_set_reg(s35390a, S35390A_CMD_INT2_REG1, buf,
+ sizeof(buf));
+
+ return err;
+}
+
+static int s35390a_read_alarm(struct i2c_client *client, struct
rtc_wkalrm *alm)
+{
+ struct s35390a *s35390a = i2c_get_clientdata(client);
+ char buf[3], sts;
+ int i, err;
+
+ err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
+ if (err < 0)
+ return err;
+
+ if (bitrev8(sts) != S35390A_INT2_MODE_ALARM)
+ return -EINVAL;
+
+ err = s35390a_get_reg(s35390a, S35390A_CMD_INT2_REG1, buf,
sizeof(buf));
+ if (err < 0)
+ return err;
+
+ /* This chip returns the bits of each byte in reverse order */
+ for (i = 0; i < 3; ++i) {
+ buf[i] = bitrev8(buf[i]);
+ buf[i] &= ~0x80;
+ }
+
+ alm->time.tm_wday = bcd2bin(buf[S35390A_ALRM_BYTE_WDAY]);
+ alm->time.tm_hour = s35390a_reg2hr(s35390a,
+ buf[S35390A_ALRM_BYTE_HOURS]);
+ alm->time.tm_min = bcd2bin(buf[S35390A_ALRM_BYTE_MINS]);
+
+ dev_dbg(&client->dev, "%s: alm is mins=%d, hours=%d, wday=%d\n",
+ __func__, alm->time.tm_min, alm->time.tm_hour,
+ alm->time.tm_wday);
+
+ return 0;
+}
+
+static int s35390a_rtc_read_alarm(struct device *dev, struct rtc_wkalrm
*alm)
+{
+ return s35390a_read_alarm(to_i2c_client(dev), alm);
+}
+
+static int s35390a_rtc_set_alarm(struct device *dev, struct rtc_wkalrm
*alm)