Message ID | 505A0BCF.5040905@xenotime.net |
---|---|
State | Not Applicable |
Delegated to: | David Miller |
Headers | show |
On 09/19/2012 11:15 AM, Randy Dunlap wrote: > From: Randy Dunlap <rdunlap@xenotime.net> > ping. This build error is still present in linux-next of 20120928. > Fix build errors in sata_highbank.c by also building libahci.o. > Fixes these build errors: > > drivers/built-in.o: In function `ahci_highbank_hardreset': > sata_highbank.c:(.text+0x1edc9a): undefined reference to `ahci_stop_engine' > sata_highbank.c:(.text+0x1edfab): undefined reference to `ahci_start_engine' > sata_highbank.c:(.text+0x1edfd5): undefined reference to `ahci_dev_classify' > drivers/built-in.o: In function `ahci_highbank_resume': > sata_highbank.c:(.text+0x1ee0af): undefined reference to `ahci_reset_controller' > sata_highbank.c:(.text+0x1ee0e1): undefined reference to `ahci_init_controller' > drivers/built-in.o: In function `ahci_highbank_probe': > sata_highbank.c:(.init.text+0xc577): undefined reference to `ahci_save_initial_config' > sata_highbank.c:(.init.text+0xc5ca): undefined reference to `ahci_set_em_messages' > sata_highbank.c:(.init.text+0xc630): undefined reference to `ahci_ignore_sss' > sata_highbank.c:(.init.text+0xc660): undefined reference to `ahci_reset_em' > sata_highbank.c:(.init.text+0xc72f): undefined reference to `ahci_reset_controller' > sata_highbank.c:(.init.text+0xc75a): undefined reference to `ahci_init_controller' > sata_highbank.c:(.init.text+0xc774): undefined reference to `ahci_print_info' > sata_highbank.c:(.init.text+0xc77c): undefined reference to `ahci_interrupt' > drivers/built-in.o:(.data+0x1d5ec): undefined reference to `ahci_ops' > drivers/built-in.o:(.data+0x1d690): undefined reference to `ahci_shost_attrs' > drivers/built-in.o:(.data+0x1d694): undefined reference to `ahci_sdev_attrs' > > Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> > Cc: Mark Langsdorf <mark.langsdorf@calxeda.com> > --- > drivers/ata/Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > --- linux-next-20120919.orig/drivers/ata/Makefile > +++ linux-next-20120919/drivers/ata/Makefile > @@ -9,7 +9,7 @@ obj-$(CONFIG_SATA_FSL) += sata_fsl.o > obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o > obj-$(CONFIG_SATA_SIL24) += sata_sil24.o > obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o > -obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o > +obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o > > # SFF w/ custom DMA > obj-$(CONFIG_PDC_ADMA) += pdc_adma.o >
On 09/28/2012 12:13 PM, Randy Dunlap wrote: > On 09/19/2012 11:15 AM, Randy Dunlap wrote: > >> From: Randy Dunlap <rdunlap@xenotime.net> >> > > > ping. > This build error is still present in linux-next of 20120928. > >> Fix build errors in sata_highbank.c by also building libahci.o. >> Fixes these build errors: >> >> drivers/built-in.o: In function `ahci_highbank_hardreset': >> sata_highbank.c:(.text+0x1edc9a): undefined reference to `ahci_stop_engine' >> sata_highbank.c:(.text+0x1edfab): undefined reference to `ahci_start_engine' >> sata_highbank.c:(.text+0x1edfd5): undefined reference to `ahci_dev_classify' >> drivers/built-in.o: In function `ahci_highbank_resume': >> sata_highbank.c:(.text+0x1ee0af): undefined reference to `ahci_reset_controller' >> sata_highbank.c:(.text+0x1ee0e1): undefined reference to `ahci_init_controller' >> drivers/built-in.o: In function `ahci_highbank_probe': >> sata_highbank.c:(.init.text+0xc577): undefined reference to `ahci_save_initial_config' >> sata_highbank.c:(.init.text+0xc5ca): undefined reference to `ahci_set_em_messages' >> sata_highbank.c:(.init.text+0xc630): undefined reference to `ahci_ignore_sss' >> sata_highbank.c:(.init.text+0xc660): undefined reference to `ahci_reset_em' >> sata_highbank.c:(.init.text+0xc72f): undefined reference to `ahci_reset_controller' >> sata_highbank.c:(.init.text+0xc75a): undefined reference to `ahci_init_controller' >> sata_highbank.c:(.init.text+0xc774): undefined reference to `ahci_print_info' >> sata_highbank.c:(.init.text+0xc77c): undefined reference to `ahci_interrupt' >> drivers/built-in.o:(.data+0x1d5ec): undefined reference to `ahci_ops' >> drivers/built-in.o:(.data+0x1d690): undefined reference to `ahci_shost_attrs' >> drivers/built-in.o:(.data+0x1d694): undefined reference to `ahci_sdev_attrs' >> >> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> >> Cc: Mark Langsdorf <mark.langsdorf@calxeda.com> >> --- >> drivers/ata/Makefile | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> --- linux-next-20120919.orig/drivers/ata/Makefile >> +++ linux-next-20120919/drivers/ata/Makefile >> @@ -9,7 +9,7 @@ obj-$(CONFIG_SATA_FSL) += sata_fsl.o >> obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o >> obj-$(CONFIG_SATA_SIL24) += sata_sil24.o >> obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o >> -obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o >> +obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o >> >> # SFF w/ custom DMA >> obj-$(CONFIG_PDC_ADMA) += pdc_adma.o Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com> -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
--- linux-next-20120919.orig/drivers/ata/Makefile +++ linux-next-20120919/drivers/ata/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_SATA_FSL) += sata_fsl.o obj-$(CONFIG_SATA_INIC162X) += sata_inic162x.o obj-$(CONFIG_SATA_SIL24) += sata_sil24.o obj-$(CONFIG_SATA_DWC) += sata_dwc_460ex.o -obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o +obj-$(CONFIG_SATA_HIGHBANK) += sata_highbank.o libahci.o # SFF w/ custom DMA obj-$(CONFIG_PDC_ADMA) += pdc_adma.o