diff mbox

[v2,1/9] net/macb: Add support for Gigabit Ethernet mode

Message ID 2a96e330d7952f6d2fd61b62c25bc4bed43413a2.1348055112.git.nicolas.ferre@atmel.com
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

Nicolas Ferre Sept. 19, 2012, 11:55 a.m. UTC 
From: Patrice Vilchez <patrice.vilchez@atmel.com>

Add Gigabit Ethernet mode to GEM cadence IP and enable RGMII connection.

Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 drivers/net/ethernet/cadence/macb.c | 15 ++++++++++++---
 drivers/net/ethernet/cadence/macb.h |  4 ++++
 2 files changed, 16 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index c4834c2..56375e2 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -152,13 +152,17 @@  static void macb_handle_link_change(struct net_device *dev)
 
 			reg = macb_readl(bp, NCFGR);
 			reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
+			if (macb_is_gem(bp))
+				reg &= ~GEM_BIT(GBE);
 
 			if (phydev->duplex)
 				reg |= MACB_BIT(FD);
 			if (phydev->speed == SPEED_100)
 				reg |= MACB_BIT(SPD);
+			if (phydev->speed == SPEED_1000)
+				reg |= GEM_BIT(GBE);
 
-			macb_writel(bp, NCFGR, reg);
+			macb_or_gem_writel(bp, NCFGR, reg);
 
 			bp->speed = phydev->speed;
 			bp->duplex = phydev->duplex;
@@ -213,7 +217,10 @@  static int macb_mii_probe(struct net_device *dev)
 	}
 
 	/* mask with MAC supported features */
-	phydev->supported &= PHY_BASIC_FEATURES;
+	if (macb_is_gem(bp))
+		phydev->supported &= PHY_GBIT_FEATURES;
+	else
+		phydev->supported &= PHY_BASIC_FEATURES;
 
 	phydev->advertising = phydev->supported;
 
@@ -1377,7 +1384,9 @@  static int __init macb_probe(struct platform_device *pdev)
 		bp->phy_interface = err;
 	}
 
-	if (bp->phy_interface == PHY_INTERFACE_MODE_RMII)
+	if (bp->phy_interface == PHY_INTERFACE_MODE_RGMII)
+		macb_or_gem_writel(bp, USRIO, GEM_BIT(RGMII));
+	else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII)
 #if defined(CONFIG_ARCH_AT91)
 		macb_or_gem_writel(bp, USRIO, (MACB_BIT(RMII) |
 					       MACB_BIT(CLKEN)));
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 335e288..f69ceef 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -145,6 +145,8 @@ 
 #define MACB_IRXFCS_SIZE			1
 
 /* GEM specific NCFGR bitfields. */
+#define GEM_GBE_OFFSET				10
+#define GEM_GBE_SIZE				1
 #define GEM_CLK_OFFSET				18
 #define GEM_CLK_SIZE				3
 #define GEM_DBW_OFFSET				21
@@ -246,6 +248,8 @@ 
 /* Bitfields in USRIO (AT91) */
 #define MACB_RMII_OFFSET			0
 #define MACB_RMII_SIZE				1
+#define GEM_RGMII_OFFSET			0	/* GEM gigabit mode */
+#define GEM_RGMII_SIZE				1
 #define MACB_CLKEN_OFFSET			1
 #define MACB_CLKEN_SIZE				1