diff mbox

[RFC,12/16] qcow2: Handle dependencies earlier

Message ID 1347968442-8860-13-git-send-email-kwolf@redhat.com
State New
Headers show

Commit Message

Kevin Wolf Sept. 18, 2012, 11:40 a.m. UTC
Handling overlapping allocations aren't just a detail of cluster
allocation. They are rather one of three ways to get the host cluster
offset for a write request:

1. If a request overlaps an in-flight allocations, the cluster offset
   can be taken from there (this is what handle_dependencies will evolve
   into) or the request must just wait until the allocation has
   completed. Accessing the L2 is not valid in this case, it has
   outdated information.

2. Outside overlapping areas, check the clusters that can be written to
   as they are, with no COW involved.

3. If a COW is required, allocate new clusters

Changing the code to reflect this doesn't change the behaviour because
overlaps cannot exist for clusters that are kept in step 2. It does
however make it easier for later patches to work on clusters that belong
to an allocation that is still in flight.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/qcow2-cluster.c |   55 ++++++++++++++++++++++++++++++++++--------------
 block/qcow2.h         |    5 ++++
 2 files changed, 44 insertions(+), 16 deletions(-)
diff mbox

Patch

diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 0f50888..4d5c3da 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -889,16 +889,10 @@  static int do_alloc_cluster_offset(BlockDriverState *bs, uint64_t guest_offset,
     uint64_t *host_offset, unsigned int *nb_clusters)
 {
     BDRVQcowState *s = bs->opaque;
-    int ret;
 
     trace_qcow2_do_alloc_clusters_offset(qemu_coroutine_self(), guest_offset,
                                          *host_offset, *nb_clusters);
 
-    ret = handle_dependencies(bs, guest_offset, nb_clusters);
-    if (ret < 0) {
-        return ret;
-    }
-
     /* Allocate new clusters */
     trace_qcow2_cluster_alloc_phys(qemu_coroutine_self());
     if (*host_offset == 0) {
@@ -910,7 +904,7 @@  static int do_alloc_cluster_offset(BlockDriverState *bs, uint64_t guest_offset,
         *host_offset = cluster_offset;
         return 0;
     } else {
-        ret = qcow2_alloc_clusters_at(bs, *host_offset, *nb_clusters);
+        int ret = qcow2_alloc_clusters_at(bs, *host_offset, *nb_clusters);
         if (ret < 0) {
             return ret;
         }
@@ -950,20 +944,51 @@  int qcow2_alloc_cluster_offset(BlockDriverState *bs, uint64_t offset,
     trace_qcow2_alloc_clusters_offset(qemu_coroutine_self(), offset,
                                       n_start, n_end);
 
-    /* Find L2 entry for the first involved cluster */
 again:
-    ret = get_cluster_table(bs, offset, &l2_table, &l2_index);
-    if (ret < 0) {
-        return ret;
-    }
-
     /*
      * Calculate the number of clusters to look for. We stop at L2 table
      * boundaries to keep things simple.
      */
+    l2_index = offset_to_l2_index(s, offset);
     nb_clusters = MIN(size_to_clusters(s, n_end << BDRV_SECTOR_BITS),
                       s->l2_size - l2_index);
 
+    /*
+     * Now start gathering as many contiguous clusters as possible:
+     *
+     * 1. Check for overlaps with in-flight allocations
+     *
+     *      a) Overlap not in the first cluster -> shorten this request and let
+     *         the caller handle the rest in its next loop iteration.
+     *
+     *      b) Real overlaps of two requests. Yield and restart the search for
+     *         contiguous clusters (the situation could have changed while we
+     *         were sleeping)
+     *
+     *      c) TODO: Request starts in the same cluster as the in-flight
+     *         allocation ends. Shorten the COW of the in-fight allocation, set
+     *         cluster_offset to write to the same cluster and set up the right
+     *         synchronisation between the in-flight request and the new one.
+     *
+     * 2. Count contiguous COPIED clusters.
+     *    TODO: Consider cluster_offset if set in step 1c.
+     *
+     * 3. If the request still hasn't completed, allocate new clusters,
+     *    considering any cluster_offset of steps 1c or 2.
+     */
+    ret = handle_dependencies(bs, offset, &nb_clusters);
+    if (ret == -EAGAIN) {
+        goto again;
+    } else if (ret < 0) {
+        return ret;
+    }
+
+    /* Find L2 entry for the first involved cluster */
+    ret = get_cluster_table(bs, offset, &l2_table, &l2_index);
+    if (ret < 0) {
+        return ret;
+    }
+
     cluster_offset = be64_to_cpu(l2_table[l2_index]);
 
     /*
@@ -1028,9 +1053,7 @@  again:
         /* Allocate, if necessary at a given offset in the image file */
         ret = do_alloc_cluster_offset(bs, alloc_offset, &alloc_cluster_offset,
                                       &nb_clusters);
-        if (ret == -EAGAIN) {
-            goto again;
-        } else if (ret < 0) {
+        if (ret < 0) {
             goto fail;
         }
 
diff --git a/block/qcow2.h b/block/qcow2.h
index 1c4dc0e..eb94463 100644
--- a/block/qcow2.h
+++ b/block/qcow2.h
@@ -302,6 +302,11 @@  static inline int size_to_l1(BDRVQcowState *s, int64_t size)
     return (size + (1ULL << shift) - 1) >> shift;
 }
 
+static inline int offset_to_l2_index(BDRVQcowState *s, int64_t offset)
+{
+    return (offset >> s->cluster_bits) & (s->l2_size - 1);
+}
+
 static inline int64_t align_offset(int64_t offset, int n)
 {
     offset = (offset + n - 1) & ~(n - 1);