[7/9] mtd: gpmi: do not set the default values for the extra clocks

Submitted by Huang Shijie on Sept. 11, 2012, 6:17 a.m.

Details

Message ID 1347344231-10295-8-git-send-email-b32955@freescale.com
State Accepted
Commit e1ca95e3a93c9a0392163a7a6791deda48b5eeca
Headers show

Commit Message

Huang Shijie Sept. 11, 2012, 6:17 a.m.
The default frequencies of the extra clocks are 200MHz.
The current code sets the extra clocks to 44.5MHz.

When i add the EDO feature to gpmi, i have to revert the extra clocks
to 200MHz.

So it is better that we do not set the default values for the extra
clocks. The driver runs well even when we do not set the default values for
extra clocks.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
 drivers/mtd/nand/gpmi-nand/gpmi-nand.c |   15 +++++----------
 1 files changed, 5 insertions(+), 10 deletions(-)

Patch hide | download patch | download mbox

diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
index c46be6c..cc74ebf 100644
--- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -513,20 +513,15 @@  static int __devinit gpmi_get_clks(struct gpmi_nand_data *this)
 		r->clock[i] = clk;
 	}
 
-	if (GPMI_IS_MX6Q(this)) {
+	if (GPMI_IS_MX6Q(this))
 		/*
-		 * Set the default values for the clocks in mx6q:
-		 *    The main clock(enfc) : 22MHz
-		 *    The others           : 44.5MHz
+		 * Set the default value for the gpmi clock in mx6q:
 		 *
-		 * These are just the default values. If you want to use
-		 * the ONFI nand which is in the Synchronous Mode, you should
-		 * change the clocks's frequencies as you need.
+		 * If you want to use the ONFI nand which is in the
+		 * Synchronous Mode, you should change the clock as you need.
 		 */
 		clk_set_rate(r->clock[0], 22000000);
-		for (i = 1; i < GPMI_CLK_MAX && r->clock[i]; i++)
-			clk_set_rate(r->clock[i], 44500000);
-	}
+
 	return 0;
 
 err_clock: