diff mbox

[U-Boot] mx6qsabrelite:Use IMX_GPIO_NR Macro

Message ID 504B3BFC.2070803@gmail.com
State Accepted
Commit 5d20881eec7e25d453755a930cbee3ba441d9ec7
Delegated to: Stefano Babic
Headers show

Commit Message

Ashok Sept. 8, 2012, 12:37 p.m. UTC 
From 803f3d39883abde7be2f8d03f52d1cab59a20e9d Mon Sep 17 00:00:00 2001
From: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
Date: Sat, 8 Sep 2012 17:56:51 +0530
Subject: [PATCH] mx6qsabrelite:Use IMX_GPIO_NR Macro

Signed-off-by: Ashok Kumar Reddy <ashokkourla2000@gmail.com>
---
 board/freescale/mx6qsabrelite/mx6qsabrelite.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
diff mbox

Patch

diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index 909ccca..4b4e89b 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -197,18 +197,18 @@  static iomux_v3_cfg_t button_pads[] = {
 
 static void setup_iomux_enet(void)
 {
-	gpio_direction_output(87, 0);  /* GPIO 3-23 */
-	gpio_direction_output(190, 1); /* GPIO 6-30 */
-	gpio_direction_output(185, 1); /* GPIO 6-25 */
-	gpio_direction_output(187, 1); /* GPIO 6-27 */
-	gpio_direction_output(188, 1); /* GPIO 6-28*/
-	gpio_direction_output(189, 1); /* GPIO 6-29 */
+	gpio_direction_output(IMX_GPIO_NR(3, 23), 0);
+	gpio_direction_output(IMX_GPIO_NR(6, 30), 1);
+	gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
+	gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
+	gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
+	gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
 	imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1));
-	gpio_direction_output(184, 1); /* GPIO 6-24 */
+	gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
 
 	/* Need delay 10ms according to KSZ9021 spec */
 	udelay(1000 * 10);
-	gpio_set_value(87, 1);  /* GPIO 3-23 */
+	gpio_set_value(IMX_GPIO_NR(3, 23), 1);
 
 	imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
 }
@@ -249,11 +249,11 @@  int board_mmc_getcd(struct mmc *mmc)
        int ret;
 
        if (cfg->esdhc_base == USDHC3_BASE_ADDR) {
-	       gpio_direction_input(192); /*GPIO7_0*/
-	       ret = !gpio_get_value(192);
+		gpio_direction_input(IMX_GPIO_NR(7, 0));
+		ret = !gpio_get_value(IMX_GPIO_NR(7, 0));
        } else {
-	       gpio_direction_input(38); /*GPIO2_6*/
-	       ret = !gpio_get_value(38);
+		gpio_direction_input(IMX_GPIO_NR(2, 6));
+		ret = !gpio_get_value(IMX_GPIO_NR(2, 6));
        }
 
        return ret;