diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index d7138cc..55c4a61 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -1294,8 +1294,7 @@ static int ep0_prime_status(struct fsl_udc *udc, int direction)
 		udc->ep0_dir = USB_DIR_OUT;
 
 	ep = &udc->eps[0];
-	if (udc->ep0_state != DATA_STATE_XMIT)
-		udc->ep0_state = WAIT_FOR_OUT_STATUS;
+	udc->ep0_state = WAIT_FOR_OUT_STATUS;
 
 	req->ep = ep;
 	req->req.length = 0;
@@ -1400,8 +1399,6 @@ static void ch9getstatus(struct fsl_udc *udc, u8 request_type, u16 value,
 
 	list_add_tail(&req->queue, &ep->queue);
 	udc->ep0_state = DATA_STATE_XMIT;
-	if (ep0_prime_status(udc, EP_DIR_OUT))
-		ep0stall(udc);
 
 	return;
 stall:
@@ -1511,14 +1508,6 @@ static void setup_received_irq(struct fsl_udc *udc,
 		spin_lock(&udc->lock);
 		udc->ep0_state = (setup->bRequestType & USB_DIR_IN)
 				?  DATA_STATE_XMIT : DATA_STATE_RECV;
-		/*
-		 * If the data stage is IN, send status prime immediately.
-		 * See 2.0 Spec chapter 8.5.3.3 for detail.
-		 */
-		if (udc->ep0_state == DATA_STATE_XMIT)
-			if (ep0_prime_status(udc, EP_DIR_OUT))
-				ep0stall(udc);
-
 	} else {
 		/* No data phase, IN status from gadget */
 		udc->ep0_dir = USB_DIR_IN;
@@ -1548,7 +1537,8 @@ static void ep0_req_complete(struct fsl_udc *udc, struct fsl_ep *ep0,
 	switch (udc->ep0_state) {
 	case DATA_STATE_XMIT:
 		/* already primed at setup_received_irq */
-		udc->ep0_state = WAIT_FOR_OUT_STATUS;
+		if (ep0_prime_status(udc, EP_DIR_OUT))
+			ep0stall(udc);
 		break;
 	case DATA_STATE_RECV:
 		/* send status phase */