Patchwork [7/8] ppc/pnv: using PCI core to do resource assignment

login
register
mail settings
Submitter Gavin Shan
Date Aug. 20, 2012, 1:49 p.m.
Message ID <1345470561-17785-8-git-send-email-shangw@linux.vnet.ibm.com>
Download mbox | patch
Permalink /patch/178799/
State Accepted, archived
Commit c40a4210a4b55284a71ed52721d9894b5bdb1953
Delegated to: Benjamin Herrenschmidt
Headers show

Comments

Gavin Shan - Aug. 20, 2012, 1:49 p.m.
Currently, the PCI probe flags "PCI_PROBE_ONLY | PCI_REASSIGN_ALL_RSRC"
used on powernv platform. That means the platform has to do the PCI
resource assignment by itself.

The patch changes the PCI probe flag to "PCI_REASSIGN_ALL_RSRC" so
that the PCI core will do the resource assignment. Also, the I/O
and MMIO minimal alignment for P2P bridges have been configured
while doing fixup for the PHBs.

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Reviewed-by: Ram Pai <linuxram@us.ibm.com>
Reviewed-by: Richard Yang <weiyang@linux.vnet.ibm.com>
---
 arch/powerpc/platforms/powernv/pci-ioda.c |   43 +++++------------------------
 1 files changed, 7 insertions(+), 36 deletions(-)

Patch

diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index c856f90..ead4eff 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1124,36 +1124,6 @@  static void pnv_pci_init_ioda_msis(struct pnv_phb *phb)
 static void pnv_pci_init_ioda_msis(struct pnv_phb *phb) { }
 #endif /* CONFIG_PCI_MSI */
 
-/* This is the starting point of our IODA specific resource
- * allocation process
- */
-static void __devinit pnv_pci_ioda_fixup_phb(struct pci_controller *hose)
-{
-	resource_size_t size, align;
-	struct pci_bus *child;
-
-	/* Associate PEs per functions */
-	pnv_ioda_setup_PEs(hose->bus);
-
-	/* Calculate all resources */
-	pnv_ioda_calc_bus(hose->bus, IORESOURCE_IO, &size, &align);
-	pnv_ioda_calc_bus(hose->bus, IORESOURCE_MEM, &size, &align);
-
-	/* Apply then to HW */
-	pnv_ioda_update_resources(hose->bus);
-
-	/* Setup DMA */
-	pnv_ioda_setup_dma(hose->private_data);
-
-	/* Configure PCI Express settings */
-	list_for_each_entry(child, &hose->bus->children, node) {
-		struct pci_dev *self = child->self;
-		if (!self)
-			continue;
-		pcie_bus_configure_settings(child, self->pcie_mpss);
-	}
-}
-
 /*
  * This function is supposed to be called on basis of PE from top
  * to bottom style. So the the I/O or MMIO segment assigned to
@@ -1473,16 +1443,17 @@  void __init pnv_pci_init_ioda1_phb(struct device_node *np)
 	/* Setup MSI support */
 	pnv_pci_init_ioda_msis(phb);
 
-	/* We set both PCI_PROBE_ONLY and PCI_REASSIGN_ALL_RSRC. This is an
-	 * odd combination which essentially means that we skip all resource
-	 * fixups and assignments in the generic code, and do it all
-	 * ourselves here
+	/*
+	 * We pass the PCI probe flag PCI_REASSIGN_ALL_RSRC here
+	 * to let the PCI core do resource assignment. It's supposed
+	 * that the PCI core will do correct I/O and MMIO alignment
+	 * for the P2P bridge bars so that each PCI bus (excluding
+	 * the child P2P bridges) can form individual PE.
 	 */
-	ppc_md.pcibios_fixup_phb = pnv_pci_ioda_fixup_phb;
 	ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
 	ppc_md.pcibios_enable_device_hook = pnv_pci_enable_device_hook;
 	ppc_md.pcibios_window_alignment = pnv_pci_window_alignment;
-	pci_add_flags(PCI_PROBE_ONLY | PCI_REASSIGN_ALL_RSRC);
+	pci_add_flags(PCI_REASSIGN_ALL_RSRC);
 
 	/* Reset IODA tables to a clean state */
 	rc = opal_pci_reset(phb_id, OPAL_PCI_IODA_TABLE_RESET, OPAL_ASSERT_RESET);