Patchwork [U-Boot] Please pull u-boot-staging/trini@ti.com

login
register
mail settings
Submitter Tom Rini
Date Aug. 17, 2012, 9:52 p.m.
Message ID <20120817215201.GG3255@bill-the-cat>
Download mbox
Permalink /patch/178399/
State Accepted
Delegated to: Albert ARIBAUD
Headers show

Pull-request

git://git.denx.de/u-boot-staging trini@ti.com

Comments

Tom Rini - Aug. 17, 2012, 9:52 p.m.
Hello,

This replaces my previous pull-request and is new warning free on
MAKEALL -a arm for ELDK4.2/5.1/5.2.1.

The following changes since commit 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:

  zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)

are available in the git repository at:

  git://git.denx.de/u-boot-staging trini@ti.com

for you to fetch changes up to 5d26e4de33fab7b132e8a8036ac54176f537d79f:

  ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15 09:43:47 -0700)

----------------------------------------------------------------
John Rigby (1):
      u8500: Separating mmc config parameters from driver

Mathieu J. Poirier (10):
      snowball: Add support for ux500 based snowball board
      u8500: Moving prcmu to cpu directory
      snowball: Adding architecture dependent initialisation
      snowball: Adding CPU clock initialisation
      snowball: Moving to ux500.v2 addess scheme for PRCMU access
      snowball: applying power to LAN and GBF controllers
      u8500: Moving processor-specific functions to cpu area.
      u8500: Enabling power to MMC device on AB8500 V2
      armv7: Adding cpu specific cache managmenent
      snowball: Adding board specific cache cleanup routine

Stephen Warren (4):
      README: fix references to config_cmd_default.h
      ARM: arm1176: enable instruction cache in arch_cpu_init()
      ARM: add basic support for the Broadcom BCM2835 SoC
      ARM: add Raspberry Pi model B board, using BCM2835 SoC

 MAINTAINERS                                        |    8 +
 README                                             |    4 +-
 arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
 arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
 arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
 arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
 arch/arm/cpu/arm1176/cpu.c                         |    7 +
 arch/arm/cpu/armv7/cpu.c                           |    8 +
 arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
 arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
 arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
 .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
 arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
 arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
 arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
 arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
 arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
 arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
 arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
 .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
 arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
 board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
 board/raspberrypi/rpi_b/Makefile                   |   34 +
 board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
 board/st-ericsson/snowball/Makefile                |   49 ++
 board/st-ericsson/snowball/db8500_pins.h           |  745 ++++++++++++++++++++
 board/st-ericsson/snowball/snowball.c              |  348 +++++++++
 board/st-ericsson/u8500/Makefile                   |    2 +-
 board/st-ericsson/u8500/u8500_href.c               |  100 +--
 boards.cfg                                         |    2 +
 drivers/gpio/Makefile                              |    2 +
 drivers/gpio/bcm2835_gpio.c                        |   89 +++
 drivers/gpio/db8500_gpio.c                         |  221 ++++++
 drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
 drivers/mmc/arm_pl180_mmci.h                       |   27 +-
 drivers/serial/serial_pl01x.c                      |    2 +
 include/configs/rpi_b.h                            |  104 +++
 include/configs/snowball.h                         |  266 +++++++
 39 files changed, 2937 insertions(+), 213 deletions(-)
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/Makefile
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/config.mk
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/reset.c
 create mode 100644 arch/arm/cpu/arm1176/bcm2835/timer.c
 create mode 100644 arch/arm/cpu/armv7/u8500/cpu.c
 rename {board/st-ericsson => arch/arm/cpu/armv7}/u8500/prcmu.c (58%)
 create mode 100644 arch/arm/include/asm/arch-bcm2835/gpio.h
 create mode 100644 arch/arm/include/asm/arch-bcm2835/timer.h
 create mode 100644 arch/arm/include/asm/arch-bcm2835/wdog.h
 create mode 100644 arch/arm/include/asm/arch-u8500/db8500_gpio.h
 create mode 100644 arch/arm/include/asm/arch-u8500/db8500_pincfg.h
 rename board/st-ericsson/u8500/prcmu-fw.h => arch/arm/include/asm/arch-u8500/prcmu.h (55%)
 create mode 100644 board/raspberrypi/rpi_b/Makefile
 create mode 100644 board/raspberrypi/rpi_b/rpi_b.c
 create mode 100644 board/st-ericsson/snowball/Makefile
 create mode 100644 board/st-ericsson/snowball/db8500_pins.h
 create mode 100644 board/st-ericsson/snowball/snowball.c
 create mode 100644 drivers/gpio/bcm2835_gpio.c
 create mode 100644 drivers/gpio/db8500_gpio.c
 create mode 100644 include/configs/rpi_b.h
 create mode 100644 include/configs/snowball.h
Albert ARIBAUD - Aug. 18, 2012, 6:28 a.m.
Hi Tom,

On Fri, 17 Aug 2012 14:52:01 -0700, Tom Rini <trini@ti.com> wrote:

> Hello,
> 
> This replaces my previous pull-request and is new warning free on
> MAKEALL -a arm for ELDK4.2/5.1/5.2.1.
> 
> The following changes since commit
> 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:
> 
>   zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)
> 
> are available in the git repository at:
> 
>   git://git.denx.de/u-boot-staging trini@ti.com
> 
> for you to fetch changes up to
> 5d26e4de33fab7b132e8a8036ac54176f537d79f:
> 
>   ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15
> 09:43:47 -0700)
> 
> ----------------------------------------------------------------
> John Rigby (1):
>       u8500: Separating mmc config parameters from driver
> 
> Mathieu J. Poirier (10):
>       snowball: Add support for ux500 based snowball board
>       u8500: Moving prcmu to cpu directory
>       snowball: Adding architecture dependent initialisation
>       snowball: Adding CPU clock initialisation
>       snowball: Moving to ux500.v2 addess scheme for PRCMU access
>       snowball: applying power to LAN and GBF controllers
>       u8500: Moving processor-specific functions to cpu area.
>       u8500: Enabling power to MMC device on AB8500 V2
>       armv7: Adding cpu specific cache managmenent
>       snowball: Adding board specific cache cleanup routine
> 
> Stephen Warren (4):
>       README: fix references to config_cmd_default.h
>       ARM: arm1176: enable instruction cache in arch_cpu_init()
>       ARM: add basic support for the Broadcom BCM2835 SoC
>       ARM: add Raspberry Pi model B board, using BCM2835 SoC
> 
>  MAINTAINERS                                        |    8 +
>  README                                             |    4 +-
>  arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
>  arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
>  arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
>  arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
>  arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
>  arch/arm/cpu/arm1176/cpu.c                         |    7 +
>  arch/arm/cpu/armv7/cpu.c                           |    8 +
>  arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
>  arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
>  arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
>  .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
>  arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
>  arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
>  arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
>  arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
>  arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
>  arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
>  arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
>  .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
>  arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
>  board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
>  board/raspberrypi/rpi_b/Makefile                   |   34 +
>  board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
>  board/st-ericsson/snowball/Makefile                |   49 ++
>  board/st-ericsson/snowball/db8500_pins.h           |  745
> ++++++++++++++++++++
> board/st-ericsson/snowball/snowball.c              |  348 +++++++++
> board/st-ericsson/u8500/Makefile                   |    2 +-
> board/st-ericsson/u8500/u8500_href.c               |  100 +--
> boards.cfg                                         |    2 +
> drivers/gpio/Makefile                              |    2 +
> drivers/gpio/bcm2835_gpio.c                        |   89 +++
> drivers/gpio/db8500_gpio.c                         |  221 ++++++
> drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
> drivers/mmc/arm_pl180_mmci.h                       |   27 +-
> drivers/serial/serial_pl01x.c                      |    2 +
> include/configs/rpi_b.h                            |  104 +++
> include/configs/snowball.h                         |  266 +++++++ 39
> files changed, 2937 insertions(+), 213 deletions(-) create mode
> 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644
> arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644
> arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644
> arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644
> arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644
> arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson =>
> arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644
> arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644
> arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644
> arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644
> arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644
> arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename
> board/st-ericsson/u8500/prcmu-fw.h =>
> arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644
> board/raspberrypi/rpi_b/Makefile create mode 100644
> board/raspberrypi/rpi_b/rpi_b.c create mode 100644
> board/st-ericsson/snowball/Makefile create mode 100644
> board/st-ericsson/snowball/db8500_pins.h create mode 100644
> board/st-ericsson/snowball/snowball.c create mode 100644
> drivers/gpio/bcm2835_gpio.c create mode 100644
> drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h
> create mode 100644 include/configs/snowball.h
> 

Are you sure you want me to only pull the top 15 patches of
u-boot-staging/trini@ti.com, but not the tens of ones that that are
below it in u-boot-staging/master? These are nowhere else, especially
not in u-boot/master, so I am wondering why your your request takes
staging/master as its base.

Amicalement,
Tom Rini - Aug. 18, 2012, 2:15 p.m.
On Sat, Aug 18, 2012 at 08:28:55AM +0200, Albert ARIBAUD wrote:
> Hi Tom,
> 
> On Fri, 17 Aug 2012 14:52:01 -0700, Tom Rini <trini@ti.com> wrote:
> 
> > Hello,
> > 
> > This replaces my previous pull-request and is new warning free on
> > MAKEALL -a arm for ELDK4.2/5.1/5.2.1.
> > 
> > The following changes since commit
> > 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:
> > 
> >   zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)
> > 
> > are available in the git repository at:
> > 
> >   git://git.denx.de/u-boot-staging trini@ti.com
> > 
> > for you to fetch changes up to
> > 5d26e4de33fab7b132e8a8036ac54176f537d79f:
> > 
> >   ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15
> > 09:43:47 -0700)
> > 
> > ----------------------------------------------------------------
> > John Rigby (1):
> >       u8500: Separating mmc config parameters from driver
> > 
> > Mathieu J. Poirier (10):
> >       snowball: Add support for ux500 based snowball board
> >       u8500: Moving prcmu to cpu directory
> >       snowball: Adding architecture dependent initialisation
> >       snowball: Adding CPU clock initialisation
> >       snowball: Moving to ux500.v2 addess scheme for PRCMU access
> >       snowball: applying power to LAN and GBF controllers
> >       u8500: Moving processor-specific functions to cpu area.
> >       u8500: Enabling power to MMC device on AB8500 V2
> >       armv7: Adding cpu specific cache managmenent
> >       snowball: Adding board specific cache cleanup routine
> > 
> > Stephen Warren (4):
> >       README: fix references to config_cmd_default.h
> >       ARM: arm1176: enable instruction cache in arch_cpu_init()
> >       ARM: add basic support for the Broadcom BCM2835 SoC
> >       ARM: add Raspberry Pi model B board, using BCM2835 SoC
> > 
> >  MAINTAINERS                                        |    8 +
> >  README                                             |    4 +-
> >  arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
> >  arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
> >  arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
> >  arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
> >  arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
> >  arch/arm/cpu/arm1176/cpu.c                         |    7 +
> >  arch/arm/cpu/armv7/cpu.c                           |    8 +
> >  arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
> >  arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
> >  arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
> >  .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
> >  arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
> >  arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
> >  arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
> >  arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
> >  arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
> >  arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
> >  arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
> >  .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
> >  arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
> >  board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
> >  board/raspberrypi/rpi_b/Makefile                   |   34 +
> >  board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
> >  board/st-ericsson/snowball/Makefile                |   49 ++
> >  board/st-ericsson/snowball/db8500_pins.h           |  745
> > ++++++++++++++++++++
> > board/st-ericsson/snowball/snowball.c              |  348 +++++++++
> > board/st-ericsson/u8500/Makefile                   |    2 +-
> > board/st-ericsson/u8500/u8500_href.c               |  100 +--
> > boards.cfg                                         |    2 +
> > drivers/gpio/Makefile                              |    2 +
> > drivers/gpio/bcm2835_gpio.c                        |   89 +++
> > drivers/gpio/db8500_gpio.c                         |  221 ++++++
> > drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
> > drivers/mmc/arm_pl180_mmci.h                       |   27 +-
> > drivers/serial/serial_pl01x.c                      |    2 +
> > include/configs/rpi_b.h                            |  104 +++
> > include/configs/snowball.h                         |  266 +++++++ 39
> > files changed, 2937 insertions(+), 213 deletions(-) create mode
> > 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644
> > arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644
> > arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644
> > arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644
> > arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644
> > arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson =>
> > arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644
> > arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644
> > arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644
> > arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644
> > arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644
> > arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename
> > board/st-ericsson/u8500/prcmu-fw.h =>
> > arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644
> > board/raspberrypi/rpi_b/Makefile create mode 100644
> > board/raspberrypi/rpi_b/rpi_b.c create mode 100644
> > board/st-ericsson/snowball/Makefile create mode 100644
> > board/st-ericsson/snowball/db8500_pins.h create mode 100644
> > board/st-ericsson/snowball/snowball.c create mode 100644
> > drivers/gpio/bcm2835_gpio.c create mode 100644
> > drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h
> > create mode 100644 include/configs/snowball.h
> 
> Are you sure you want me to only pull the top 15 patches of
> u-boot-staging/trini@ti.com, but not the tens of ones that that are
> below it in u-boot-staging/master? These are nowhere else, especially
> not in u-boot/master, so I am wondering why your your request takes
> staging/master as its base.

I don't see any patches like that.  And I did a quick re-confirm of what
is in trini@ti.com and that's what I want to replace the commits in
u-boot-arm/master from before.
Tom Rini - Aug. 18, 2012, 8:53 p.m.
On Sat, Aug 18, 2012 at 07:15:56AM -0700, Tom Rini wrote:
> On Sat, Aug 18, 2012 at 08:28:55AM +0200, Albert ARIBAUD wrote:
> > Hi Tom,
> > 
> > On Fri, 17 Aug 2012 14:52:01 -0700, Tom Rini <trini@ti.com> wrote:
> > 
> > > Hello,
> > > 
> > > This replaces my previous pull-request and is new warning free on
> > > MAKEALL -a arm for ELDK4.2/5.1/5.2.1.
> > > 
> > > The following changes since commit
> > > 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:
> > > 
> > >   zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)
> > > 
> > > are available in the git repository at:
> > > 
> > >   git://git.denx.de/u-boot-staging trini@ti.com
> > > 
> > > for you to fetch changes up to
> > > 5d26e4de33fab7b132e8a8036ac54176f537d79f:
> > > 
> > >   ARM: add Raspberry Pi model B board, using BCM2835 SoC (2012-08-15
> > > 09:43:47 -0700)
> > > 
> > > ----------------------------------------------------------------
> > > John Rigby (1):
> > >       u8500: Separating mmc config parameters from driver
> > > 
> > > Mathieu J. Poirier (10):
> > >       snowball: Add support for ux500 based snowball board
> > >       u8500: Moving prcmu to cpu directory
> > >       snowball: Adding architecture dependent initialisation
> > >       snowball: Adding CPU clock initialisation
> > >       snowball: Moving to ux500.v2 addess scheme for PRCMU access
> > >       snowball: applying power to LAN and GBF controllers
> > >       u8500: Moving processor-specific functions to cpu area.
> > >       u8500: Enabling power to MMC device on AB8500 V2
> > >       armv7: Adding cpu specific cache managmenent
> > >       snowball: Adding board specific cache cleanup routine
> > > 
> > > Stephen Warren (4):
> > >       README: fix references to config_cmd_default.h
> > >       ARM: arm1176: enable instruction cache in arch_cpu_init()
> > >       ARM: add basic support for the Broadcom BCM2835 SoC
> > >       ARM: add Raspberry Pi model B board, using BCM2835 SoC
> > > 
> > >  MAINTAINERS                                        |    8 +
> > >  README                                             |    4 +-
> > >  arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
> > >  arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
> > >  arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
> > >  arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
> > >  arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
> > >  arch/arm/cpu/arm1176/cpu.c                         |    7 +
> > >  arch/arm/cpu/armv7/cpu.c                           |    8 +
> > >  arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
> > >  arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
> > >  arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
> > >  .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
> > >  arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
> > >  arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
> > >  arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
> > >  arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
> > >  arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
> > >  arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
> > >  arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
> > >  .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
> > >  arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
> > >  board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
> > >  board/raspberrypi/rpi_b/Makefile                   |   34 +
> > >  board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
> > >  board/st-ericsson/snowball/Makefile                |   49 ++
> > >  board/st-ericsson/snowball/db8500_pins.h           |  745
> > > ++++++++++++++++++++
> > > board/st-ericsson/snowball/snowball.c              |  348 +++++++++
> > > board/st-ericsson/u8500/Makefile                   |    2 +-
> > > board/st-ericsson/u8500/u8500_href.c               |  100 +--
> > > boards.cfg                                         |    2 +
> > > drivers/gpio/Makefile                              |    2 +
> > > drivers/gpio/bcm2835_gpio.c                        |   89 +++
> > > drivers/gpio/db8500_gpio.c                         |  221 ++++++
> > > drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
> > > drivers/mmc/arm_pl180_mmci.h                       |   27 +-
> > > drivers/serial/serial_pl01x.c                      |    2 +
> > > include/configs/rpi_b.h                            |  104 +++
> > > include/configs/snowball.h                         |  266 +++++++ 39
> > > files changed, 2937 insertions(+), 213 deletions(-) create mode
> > > 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create mode 100644
> > > arch/arm/cpu/arm1176/bcm2835/config.mk create mode 100644
> > > arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode 100644
> > > arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644
> > > arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644
> > > arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson =>
> > > arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644
> > > arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644
> > > arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644
> > > arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644
> > > arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644
> > > arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename
> > > board/st-ericsson/u8500/prcmu-fw.h =>
> > > arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644
> > > board/raspberrypi/rpi_b/Makefile create mode 100644
> > > board/raspberrypi/rpi_b/rpi_b.c create mode 100644
> > > board/st-ericsson/snowball/Makefile create mode 100644
> > > board/st-ericsson/snowball/db8500_pins.h create mode 100644
> > > board/st-ericsson/snowball/snowball.c create mode 100644
> > > drivers/gpio/bcm2835_gpio.c create mode 100644
> > > drivers/gpio/db8500_gpio.c create mode 100644 include/configs/rpi_b.h
> > > create mode 100644 include/configs/snowball.h
> > 
> > Are you sure you want me to only pull the top 15 patches of
> > u-boot-staging/trini@ti.com, but not the tens of ones that that are
> > below it in u-boot-staging/master? These are nowhere else, especially
> > not in u-boot/master, so I am wondering why your your request takes
> > staging/master as its base.
> 
> I don't see any patches like that.  And I did a quick re-confirm of what
> is in trini@ti.com and that's what I want to replace the commits in
> u-boot-arm/master from before.

To be clear, u-boot-staging/trini@ti.com is based on a somewhat older,
but not top of tree u-boot/master than what u-boot-arm is based on
today.  I think your local u-boot/master is out of date.
http://git.denx.de/?p=u-boot.git;a=commit;h=4d3c95f5ea7c737a21cd6b9c59435ee693b3f127
is what my branch is on top of.
Albert ARIBAUD - Aug. 30, 2012, 7:44 a.m.
Hi Tom,

On Sat, 18 Aug 2012 13:53:16 -0700, Tom Rini <trini@ti.com> wrote:

> On Sat, Aug 18, 2012 at 07:15:56AM -0700, Tom Rini wrote:
> > On Sat, Aug 18, 2012 at 08:28:55AM +0200, Albert ARIBAUD wrote:
> > > Hi Tom,
> > > 
> > > On Fri, 17 Aug 2012 14:52:01 -0700, Tom Rini <trini@ti.com> wrote:
> > > 
> > > > Hello,
> > > > 
> > > > This replaces my previous pull-request and is new warning free
> > > > on MAKEALL -a arm for ELDK4.2/5.1/5.2.1.
> > > > 
> > > > The following changes since commit
> > > > 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:
> > > > 
> > > >   zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)
> > > > 
> > > > are available in the git repository at:
> > > > 
> > > >   git://git.denx.de/u-boot-staging trini@ti.com
> > > > 
> > > > for you to fetch changes up to
> > > > 5d26e4de33fab7b132e8a8036ac54176f537d79f:
> > > > 
> > > >   ARM: add Raspberry Pi model B board, using BCM2835 SoC
> > > > (2012-08-15 09:43:47 -0700)
> > > > 
> > > > ----------------------------------------------------------------
> > > > John Rigby (1):
> > > >       u8500: Separating mmc config parameters from driver
> > > > 
> > > > Mathieu J. Poirier (10):
> > > >       snowball: Add support for ux500 based snowball board
> > > >       u8500: Moving prcmu to cpu directory
> > > >       snowball: Adding architecture dependent initialisation
> > > >       snowball: Adding CPU clock initialisation
> > > >       snowball: Moving to ux500.v2 addess scheme for PRCMU
> > > > access snowball: applying power to LAN and GBF controllers
> > > >       u8500: Moving processor-specific functions to cpu area.
> > > >       u8500: Enabling power to MMC device on AB8500 V2
> > > >       armv7: Adding cpu specific cache managmenent
> > > >       snowball: Adding board specific cache cleanup routine
> > > > 
> > > > Stephen Warren (4):
> > > >       README: fix references to config_cmd_default.h
> > > >       ARM: arm1176: enable instruction cache in arch_cpu_init()
> > > >       ARM: add basic support for the Broadcom BCM2835 SoC
> > > >       ARM: add Raspberry Pi model B board, using BCM2835 SoC
> > > > 
> > > >  MAINTAINERS                                        |    8 +
> > > >  README                                             |    4 +-
> > > >  arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
> > > >  arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
> > > >  arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
> > > >  arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
> > > >  arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
> > > >  arch/arm/cpu/arm1176/cpu.c                         |    7 +
> > > >  arch/arm/cpu/armv7/cpu.c                           |    8 +
> > > >  arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
> > > >  arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
> > > >  arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
> > > >  .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
> > > >  arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
> > > >  arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
> > > >  arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
> > > >  arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
> > > >  arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
> > > >  arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
> > > >  arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
> > > >  .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
> > > >  arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
> > > >  board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
> > > >  board/raspberrypi/rpi_b/Makefile                   |   34 +
> > > >  board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
> > > >  board/st-ericsson/snowball/Makefile                |   49 ++
> > > >  board/st-ericsson/snowball/db8500_pins.h           |  745
> > > > ++++++++++++++++++++
> > > > board/st-ericsson/snowball/snowball.c              |  348
> > > > +++++++++ board/st-ericsson/u8500/Makefile
> > > > |    2 +- board/st-ericsson/u8500/u8500_href.c               |
> > > > 100 +-- boards.cfg                                         |
> > > > 2 + drivers/gpio/Makefile                              |    2 +
> > > > drivers/gpio/bcm2835_gpio.c                        |   89 +++
> > > > drivers/gpio/db8500_gpio.c                         |  221 ++++++
> > > > drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
> > > > drivers/mmc/arm_pl180_mmci.h                       |   27 +-
> > > > drivers/serial/serial_pl01x.c                      |    2 +
> > > > include/configs/rpi_b.h                            |  104 +++
> > > > include/configs/snowball.h                         |  266
> > > > +++++++ 39 files changed, 2937 insertions(+), 213 deletions(-)
> > > > create mode 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create
> > > > mode 100644 arch/arm/cpu/arm1176/bcm2835/config.mk create mode
> > > > 100644 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode
> > > > 100644 arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644
> > > > arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644
> > > > arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson =>
> > > > arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644
> > > > arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644
> > > > arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644
> > > > arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644
> > > > arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644
> > > > arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename
> > > > board/st-ericsson/u8500/prcmu-fw.h =>
> > > > arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644
> > > > board/raspberrypi/rpi_b/Makefile create mode 100644
> > > > board/raspberrypi/rpi_b/rpi_b.c create mode 100644
> > > > board/st-ericsson/snowball/Makefile create mode 100644
> > > > board/st-ericsson/snowball/db8500_pins.h create mode 100644
> > > > board/st-ericsson/snowball/snowball.c create mode 100644
> > > > drivers/gpio/bcm2835_gpio.c create mode 100644
> > > > drivers/gpio/db8500_gpio.c create mode 100644
> > > > include/configs/rpi_b.h create mode 100644
> > > > include/configs/snowball.h
> > > 
> > > Are you sure you want me to only pull the top 15 patches of
> > > u-boot-staging/trini@ti.com, but not the tens of ones that that
> > > are below it in u-boot-staging/master? These are nowhere else,
> > > especially not in u-boot/master, so I am wondering why your your
> > > request takes staging/master as its base.
> > 
> > I don't see any patches like that.  And I did a quick re-confirm of
> > what is in trini@ti.com and that's what I want to replace the
> > commits in u-boot-arm/master from before.
> 
> To be clear, u-boot-staging/trini@ti.com is based on a somewhat older,
> but not top of tree u-boot/master than what u-boot-arm is based on
> today.  I think your local u-boot/master is out of date.
> http://git.denx.de/?p=u-boot.git;a=commit;h=4d3c95f5ea7c737a21cd6b9c59435ee693b3f127
> is what my branch is on top of.

Top 15 patches ("snowball: Add support for ux500 based snowball
board" to "ARM: add Raspberry Pi model B board, using BCM2835 SoC")
applied to u-boot-arm/master, resulting in the total number of boards
built rising up from 314 to 315.

Please make sure this is what you wanted.

Thanks and apologies for the time it took!

Amicalement,
Tom Rini - Aug. 30, 2012, 3:50 p.m.
On Thu, Aug 30, 2012 at 09:44:54AM +0200, Albert ARIBAUD wrote:
> Hi Tom,
> 
> On Sat, 18 Aug 2012 13:53:16 -0700, Tom Rini <trini@ti.com> wrote:
> 
> > On Sat, Aug 18, 2012 at 07:15:56AM -0700, Tom Rini wrote:
> > > On Sat, Aug 18, 2012 at 08:28:55AM +0200, Albert ARIBAUD wrote:
> > > > Hi Tom,
> > > > 
> > > > On Fri, 17 Aug 2012 14:52:01 -0700, Tom Rini <trini@ti.com> wrote:
> > > > 
> > > > > Hello,
> > > > > 
> > > > > This replaces my previous pull-request and is new warning free
> > > > > on MAKEALL -a arm for ELDK4.2/5.1/5.2.1.
> > > > > 
> > > > > The following changes since commit
> > > > > 4d3c95f5ea7c737a21cd6b9c59435ee693b3f127:
> > > > > 
> > > > >   zfs: Add ZFS filesystem support (2012-08-09 23:42:20 +0200)
> > > > > 
> > > > > are available in the git repository at:
> > > > > 
> > > > >   git://git.denx.de/u-boot-staging trini@ti.com
> > > > > 
> > > > > for you to fetch changes up to
> > > > > 5d26e4de33fab7b132e8a8036ac54176f537d79f:
> > > > > 
> > > > >   ARM: add Raspberry Pi model B board, using BCM2835 SoC
> > > > > (2012-08-15 09:43:47 -0700)
> > > > > 
> > > > > ----------------------------------------------------------------
> > > > > John Rigby (1):
> > > > >       u8500: Separating mmc config parameters from driver
> > > > > 
> > > > > Mathieu J. Poirier (10):
> > > > >       snowball: Add support for ux500 based snowball board
> > > > >       u8500: Moving prcmu to cpu directory
> > > > >       snowball: Adding architecture dependent initialisation
> > > > >       snowball: Adding CPU clock initialisation
> > > > >       snowball: Moving to ux500.v2 addess scheme for PRCMU
> > > > > access snowball: applying power to LAN and GBF controllers
> > > > >       u8500: Moving processor-specific functions to cpu area.
> > > > >       u8500: Enabling power to MMC device on AB8500 V2
> > > > >       armv7: Adding cpu specific cache managmenent
> > > > >       snowball: Adding board specific cache cleanup routine
> > > > > 
> > > > > Stephen Warren (4):
> > > > >       README: fix references to config_cmd_default.h
> > > > >       ARM: arm1176: enable instruction cache in arch_cpu_init()
> > > > >       ARM: add basic support for the Broadcom BCM2835 SoC
> > > > >       ARM: add Raspberry Pi model B board, using BCM2835 SoC
> > > > > 
> > > > >  MAINTAINERS                                        |    8 +
> > > > >  README                                             |    4 +-
> > > > >  arch/arm/cpu/arm1176/bcm2835/Makefile              |   37 +
> > > > >  arch/arm/cpu/arm1176/bcm2835/config.mk             |   19 +
> > > > >  arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S       |   19 +
> > > > >  arch/arm/cpu/arm1176/bcm2835/reset.c               |   35 +
> > > > >  arch/arm/cpu/arm1176/bcm2835/timer.c               |   55 ++
> > > > >  arch/arm/cpu/arm1176/cpu.c                         |    7 +
> > > > >  arch/arm/cpu/armv7/cpu.c                           |    8 +
> > > > >  arch/arm/cpu/armv7/u8500/Makefile                  |    2 +-
> > > > >  arch/arm/cpu/armv7/u8500/clock.c                   |   34 +
> > > > >  arch/arm/cpu/armv7/u8500/cpu.c                     |  192 +++++
> > > > >  .../arm/cpu/armv7}/u8500/prcmu.c                   |  128 +++-
> > > > >  arch/arm/include/asm/arch-bcm2835/gpio.h           |   66 ++
> > > > >  arch/arm/include/asm/arch-bcm2835/timer.h          |   37 +
> > > > >  arch/arm/include/asm/arch-bcm2835/wdog.h           |   36 +
> > > > >  arch/arm/include/asm/arch-u8500/clock.h            |    5 +-
> > > > >  arch/arm/include/asm/arch-u8500/db8500_gpio.h      |   42 ++
> > > > >  arch/arm/include/asm/arch-u8500/db8500_pincfg.h    |  170 +++++
> > > > >  arch/arm/include/asm/arch-u8500/hardware.h         |   33 +-
> > > > >  .../arm/include/asm/arch-u8500/prcmu.h             |   35 +-
> > > > >  arch/arm/include/asm/arch-u8500/sys_proto.h        |    1 +
> > > > >  board/armltd/vexpress/ca9x4_ct_vxp.c               |   21 +-
> > > > >  board/raspberrypi/rpi_b/Makefile                   |   34 +
> > > > >  board/raspberrypi/rpi_b/rpi_b.c                    |   34 +
> > > > >  board/st-ericsson/snowball/Makefile                |   49 ++
> > > > >  board/st-ericsson/snowball/db8500_pins.h           |  745
> > > > > ++++++++++++++++++++
> > > > > board/st-ericsson/snowball/snowball.c              |  348
> > > > > +++++++++ board/st-ericsson/u8500/Makefile
> > > > > |    2 +- board/st-ericsson/u8500/u8500_href.c               |
> > > > > 100 +-- boards.cfg                                         |
> > > > > 2 + drivers/gpio/Makefile                              |    2 +
> > > > > drivers/gpio/bcm2835_gpio.c                        |   89 +++
> > > > > drivers/gpio/db8500_gpio.c                         |  221 ++++++
> > > > > drivers/mmc/arm_pl180_mmci.c                       |  131 ++--
> > > > > drivers/mmc/arm_pl180_mmci.h                       |   27 +-
> > > > > drivers/serial/serial_pl01x.c                      |    2 +
> > > > > include/configs/rpi_b.h                            |  104 +++
> > > > > include/configs/snowball.h                         |  266
> > > > > +++++++ 39 files changed, 2937 insertions(+), 213 deletions(-)
> > > > > create mode 100644 arch/arm/cpu/arm1176/bcm2835/Makefile create
> > > > > mode 100644 arch/arm/cpu/arm1176/bcm2835/config.mk create mode
> > > > > 100644 arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S create mode
> > > > > 100644 arch/arm/cpu/arm1176/bcm2835/reset.c create mode 100644
> > > > > arch/arm/cpu/arm1176/bcm2835/timer.c create mode 100644
> > > > > arch/arm/cpu/armv7/u8500/cpu.c rename {board/st-ericsson =>
> > > > > arch/arm/cpu/armv7}/u8500/prcmu.c (58%) create mode 100644
> > > > > arch/arm/include/asm/arch-bcm2835/gpio.h create mode 100644
> > > > > arch/arm/include/asm/arch-bcm2835/timer.h create mode 100644
> > > > > arch/arm/include/asm/arch-bcm2835/wdog.h create mode 100644
> > > > > arch/arm/include/asm/arch-u8500/db8500_gpio.h create mode 100644
> > > > > arch/arm/include/asm/arch-u8500/db8500_pincfg.h rename
> > > > > board/st-ericsson/u8500/prcmu-fw.h =>
> > > > > arch/arm/include/asm/arch-u8500/prcmu.h (55%) create mode 100644
> > > > > board/raspberrypi/rpi_b/Makefile create mode 100644
> > > > > board/raspberrypi/rpi_b/rpi_b.c create mode 100644
> > > > > board/st-ericsson/snowball/Makefile create mode 100644
> > > > > board/st-ericsson/snowball/db8500_pins.h create mode 100644
> > > > > board/st-ericsson/snowball/snowball.c create mode 100644
> > > > > drivers/gpio/bcm2835_gpio.c create mode 100644
> > > > > drivers/gpio/db8500_gpio.c create mode 100644
> > > > > include/configs/rpi_b.h create mode 100644
> > > > > include/configs/snowball.h
> > > > 
> > > > Are you sure you want me to only pull the top 15 patches of
> > > > u-boot-staging/trini@ti.com, but not the tens of ones that that
> > > > are below it in u-boot-staging/master? These are nowhere else,
> > > > especially not in u-boot/master, so I am wondering why your your
> > > > request takes staging/master as its base.
> > > 
> > > I don't see any patches like that.  And I did a quick re-confirm of
> > > what is in trini@ti.com and that's what I want to replace the
> > > commits in u-boot-arm/master from before.
> > 
> > To be clear, u-boot-staging/trini@ti.com is based on a somewhat older,
> > but not top of tree u-boot/master than what u-boot-arm is based on
> > today.  I think your local u-boot/master is out of date.
> > http://git.denx.de/?p=u-boot.git;a=commit;h=4d3c95f5ea7c737a21cd6b9c59435ee693b3f127
> > is what my branch is on top of.
> 
> Top 15 patches ("snowball: Add support for ux500 based snowball
> board" to "ARM: add Raspberry Pi model B board, using BCM2835 SoC")
> applied to u-boot-arm/master, resulting in the total number of boards
> built rising up from 314 to 315.
> 
> Please make sure this is what you wanted.
> 
> Thanks and apologies for the time it took!

Thanks for taking it.  Things look good.  You only saw one new board
built because the patch from Allen Martin that makes 'MAKEALL arm' work
like 'MAKEALL -a arm' isn't in yet :)  (rpi_b is arm1176 which isn't in
MAKEALL arm but is I believe in -a arm).