| Message ID | 1345032008-29365-1-git-send-email-kraxel@redhat.com |
|---|---|
| State | New |
| Headers | show |
Hi, On 08/15/2012 02:00 PM, Gerd Hoffmann wrote: > First, not all interrupts are subject to Interrupt Threshold Control, > some of them must be delivered without delay. > > Second, Interrupt Threshold Control state must be part of vmstate, > otherwise we might loose IRQs on migration. Looks good except for 2 things: 1) For some reason it does not fix my redirected usb mass storage device not seen until lsusb issue, I will investigate this further 2) Does not apply cleanly to master, there is no vmstate_ehci.pre_seave in master Regards, Hans > > Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> > --- > hw/usb/hcd-ehci.c | 12 ++++++++++-- > 1 files changed, 10 insertions(+), 2 deletions(-) > > diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c > index 2eeef29..b78bf44 100644 > --- a/hw/usb/hcd-ehci.c > +++ b/hw/usb/hcd-ehci.c > @@ -576,7 +576,12 @@ static inline void ehci_update_irq(EHCIState *s) > /* flag interrupt condition */ > static inline void ehci_raise_irq(EHCIState *s, int intr) > { > - s->usbsts_pending |= intr; > + if (intr & (USBSTS_PCD | USBSTS_FLR | USBSTS_HSE)) { > + s->usbsts |= intr; > + ehci_update_irq(s); > + } else { > + s->usbsts_pending |= intr; > + } > } > > /* > @@ -2480,7 +2485,8 @@ static int usb_ehci_post_load(void *opaque, int version_id) > > static const VMStateDescription vmstate_ehci = { > .name = "ehci", > - .version_id = 1, > + .version_id = 2, > + .minimum_version_id = 1, > .pre_save = usb_ehci_pre_save, > .post_load = usb_ehci_post_load, > .fields = (VMStateField[]) { > @@ -2488,6 +2494,8 @@ static const VMStateDescription vmstate_ehci = { > /* mmio registers */ > VMSTATE_UINT32(usbcmd, EHCIState), > VMSTATE_UINT32(usbsts, EHCIState), > + VMSTATE_UINT32_V(usbsts_pending, EHCIState, 2), > + VMSTATE_UINT32_V(usbsts_frindex, EHCIState, 2), > VMSTATE_UINT32(usbintr, EHCIState), > VMSTATE_UINT32(frindex, EHCIState), > VMSTATE_UINT32(ctrldssegment, EHCIState), >
diff --git a/hw/usb/hcd-ehci.c b/hw/usb/hcd-ehci.c index 2eeef29..b78bf44 100644 --- a/hw/usb/hcd-ehci.c +++ b/hw/usb/hcd-ehci.c @@ -576,7 +576,12 @@ static inline void ehci_update_irq(EHCIState *s) /* flag interrupt condition */ static inline void ehci_raise_irq(EHCIState *s, int intr) { - s->usbsts_pending |= intr; + if (intr & (USBSTS_PCD | USBSTS_FLR | USBSTS_HSE)) { + s->usbsts |= intr; + ehci_update_irq(s); + } else { + s->usbsts_pending |= intr; + } } /* @@ -2480,7 +2485,8 @@ static int usb_ehci_post_load(void *opaque, int version_id) static const VMStateDescription vmstate_ehci = { .name = "ehci", - .version_id = 1, + .version_id = 2, + .minimum_version_id = 1, .pre_save = usb_ehci_pre_save, .post_load = usb_ehci_post_load, .fields = (VMStateField[]) { @@ -2488,6 +2494,8 @@ static const VMStateDescription vmstate_ehci = { /* mmio registers */ VMSTATE_UINT32(usbcmd, EHCIState), VMSTATE_UINT32(usbsts, EHCIState), + VMSTATE_UINT32_V(usbsts_pending, EHCIState, 2), + VMSTATE_UINT32_V(usbsts_frindex, EHCIState, 2), VMSTATE_UINT32(usbintr, EHCIState), VMSTATE_UINT32(frindex, EHCIState), VMSTATE_UINT32(ctrldssegment, EHCIState),
First, not all interrupts are subject to Interrupt Threshold Control, some of them must be delivered without delay. Second, Interrupt Threshold Control state must be part of vmstate, otherwise we might loose IRQs on migration. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> --- hw/usb/hcd-ehci.c | 12 ++++++++++-- 1 files changed, 10 insertions(+), 2 deletions(-)