[v3,3/7] mv643xx.c: Add basic device tree support.
diff mbox

Message ID 1344350092-24050-4-git-send-email-ian.molton@codethink.co.uk
State Not Applicable, archived
Delegated to: David Miller
Headers show

Commit Message

Ian Molton Aug. 7, 2012, 2:34 p.m. UTC
This patch adds basic device tree support to the mv643xx ethernet driver.

    It should be enough for most current users of the device, and should allow
    a painless migration.

    Signed-off-by: Ian Molton <ian.molton@codethink.co.uk>
---
 Documentation/devicetree/bindings/net/mv643xx.txt |   75 +++++++++++++++++
 drivers/net/ethernet/marvell/mv643xx_eth.c        |   93 +++++++++++++++++++--
 2 files changed, 161 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/mv643xx.txt

Comments

Arnd Bergmann Aug. 7, 2012, 2:56 p.m. UTC | #1
On Tuesday 07 August 2012, Ian Molton wrote:
>     This patch adds basic device tree support to the mv643xx ethernet driver.
> 
>     It should be enough for most current users of the device, and should allow
>     a painless migration.
> 
>     Signed-off-by: Ian Molton <ian.molton@codethink.co.uk>
> ---
>  Documentation/devicetree/bindings/net/mv643xx.txt |   75 +++++++++++++++++
>  drivers/net/ethernet/marvell/mv643xx_eth.c        |   93 +++++++++++++++++++--
>  2 files changed, 161 insertions(+), 7 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/net/mv643xx.txt

Hi Ian,

Have you had a look at Documentation/devicetree/bindings/marvell.txt ?

I think it documents some of the same thing, so it would be good
to keep all of that in one place. We might also want to move
some of the code from arch/powerpc/sysdev/mv64x60_dev.c
to live in the same place as the device driver.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Ian Molton Aug. 7, 2012, 3:56 p.m. UTC | #2
On 07/08/12 15:56, Arnd Bergmann wrote:

> Hi Ian,
>
> Have you had a look at Documentation/devicetree/bindings/marvell.txt
> ?

Nope. I had no idea it was hiding there.

> I think it documents some of the same thing,

Not really. It documents some godawful hack that recycled the platform
device -based driver and provided a DT binding for it, just for PPC.

I cant even *find* anything that implements code for whatever
"marvell,mv64360-mdio" might be. I'm sure it might exist somewhere.

> We might also want to move some of the
> code from arch/powerpc/sysdev/mv64x60_dev.c to live in the same place
> as the device driver.

I hope not. I don't really want to touch that stuff at all. If it works
the way it
is, then it can stay that way. If the PPC folk want to send patches to
add the
properties they use to the driver, then they can do. I'll send an email
their
way and see if they want to join in.

From my perspective, the next thing that needs to happen to the driver is
for it to be broken up into ethernet and mdio drivers, so that we can
get rid
of all this shared_smi craziness... But that's for another patch series.

-Ian


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Arnd Bergmann Aug. 7, 2012, 8:25 p.m. UTC | #3
On Tuesday 07 August 2012, Ian Molton wrote:
> > I think it documents some of the same thing,
> 
> Not really. It documents some godawful hack that recycled the platform
> device -based driver and provided a DT binding for it, just for PPC.
> 
> I cant even find anything that implements code for whatever
> "marvell,mv64360-mdio" might be. I'm sure it might exist somewhere.

The code dates back to when we had separate buses for platform devices
and of devices, and then it was decided not to add support for both
bus types to each of the marvell drivers. In hindsight it would have
been better to do that, but that was impossible to tell back then.

> > We might also want to move some of the
> > code from arch/powerpc/sysdev/mv64x60_dev.c to live in the same place
> > as the device driver.
> 
> I hope not. I don't really want to touch that stuff at all. If it works
> the way it
> is, then it can stay that way. If the PPC folk want to send patches to
> add the
> properties they use to the driver, then they can do. I'll send an email
> their
> way and see if they want to join in.
> 
> From my perspective, the next thing that needs to happen to the driver is
> for it to be broken up into ethernet and mdio drivers, so that we can
> get rid
> of all this shared_smi craziness... But that's for another patch series.

Adding devicetree-discuss and linuxppc-dev, as well as Dale Farnsworth,
who initially added the bindings for mv643xx.

I would hope that at least some of the properties that are used on
powerpc can be reused in the same way for other architectures.
The method to find the phy address on powerpc does indeed make
more sense than the "port_number" property you suggested, and the
phandle for the phy node is usually called "phy" not "mdio".

I'm not sure if the ethernet-group is required on ARM as well, but
it does sound a lot like what you actually want instead of the
shared_smi property.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/net/mv643xx.txt b/Documentation/devicetree/bindings/net/mv643xx.txt
new file mode 100644
index 0000000..2727f79
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mv643xx.txt
@@ -0,0 +1,75 @@ 
+mv643xx related nodes.
+
+marvell,mdio-mv643xx:
+
+Required properties:
+
+ - interrupts : <a> where a is the SMI interrupt number.
+ - reg : the base address and size of the controllers register space.
+
+Optional properties:
+ - shared_smi : on some chips, the second PHY is "shared", meaning it is
+	really accessed via the first SMI controller. It is passed in this
+	way due to the present structure of the driver, which requires the
+	base address for the MAC to be passed in via the SMI controllers
+	platform data.
+ - tx_csum_limit : on some devices, this option is required for proper
+	operation wrt. jumbo frames.
+
+
+Example:
+
+smi0: mdio@72000 {
+	compatible = "marvell,mdio-mv643xx";
+	reg = <0x72000 0x4000>;
+	interrupts = <46>;
+	tx_csum_limit = <1600>;
+	status = "disabled";
+};
+
+smi1: mdio@76000 {
+	compatible = "marvell,mdio-mv643xx";
+	reg = <0x76000 0x4000>;
+	interrupts = <47>;
+	shared_smi = <&smi0>;
+	tx_csum_limit = <1600>;
+	status = "disabled";
+};
+
+
+
+marvell,mv643xx-eth:
+
+Required properties:
+ - interrupts : the port interrupt number.
+ - mdio : phandle of the smi device as drescribed above
+
+Optional properties:
+ - port_number : the port number on this bus.
+ - phy_addr : the PHY address.
+ - reg : should match the mdio reg this device is attached to.
+	this is a required hack for now due to the way the
+	driver is constructed. This allows the device clock to be
+	kept running so that the MAC is not lost after boot.
+
+
+Example:
+
+egiga0 {
+	compatible = "marvell,mv643xx-eth";
+	reg = <0x72000 0x4000>;
+	mdio = <&smi0>;
+	port_number = <0>;
+	phy_addr = <0x80>;
+	interrupts = <11>;
+};
+
+egiga1 {
+	compatible = "marvell,mv643xx-eth";
+	reg = <0x76000 0x4000>;
+	mdio = <&smi1>;
+	port_number = <0>;
+	phy_addr = <0x81>;
+	interrupts = <15>;
+};
+
diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c
index 92497eb..bb80050 100644
--- a/drivers/net/ethernet/marvell/mv643xx_eth.c
+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
@@ -48,6 +48,9 @@ 
 #include <linux/ethtool.h>
 #include <linux/platform_device.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_irq.h>
 #include <linux/kernel.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
@@ -2601,7 +2604,7 @@  static void infer_hw_params(struct mv643xx_eth_shared_private *msp)
 static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 {
 	static int mv643xx_eth_version_printed;
-	struct mv643xx_eth_shared_platform_data *pd = pdev->dev.platform_data;
+	struct mv643xx_eth_shared_platform_data *pd;
 	struct mv643xx_eth_shared_private *msp;
 	const struct mbus_dram_target_info *dram;
 	struct resource *res;
@@ -2625,6 +2628,26 @@  static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 	if (msp->base == NULL)
 		goto out_free;
 
+	if (pdev->dev.of_node) {
+		struct device_node *np = NULL;
+
+		/* when all users of this driver use FDT, we can remove this */
+		pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+		if (!pd) {
+			dev_dbg(&pdev->dev, "Could not allocate platform data\n");
+			goto out_free;
+		}
+
+		of_property_read_u32(pdev->dev.of_node,
+			"tx_csum_limit", &pd->tx_csum_limit);
+
+		np = of_parse_phandle(pdev->dev.of_node, "shared_smi", 0);
+		if (np)
+			pd->shared_smi = of_find_device_by_node(np);
+
+	} else {
+		pd = pdev->dev.platform_data;
+	}
 	/*
 	 * Set up and register SMI bus.
 	 */
@@ -2657,7 +2680,6 @@  static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (res != NULL) {
 		int err;
-
 		err = request_irq(res->start, mv643xx_eth_err_irq,
 				  IRQF_SHARED, "mv643xx_eth", msp);
 		if (!err) {
@@ -2675,6 +2697,10 @@  static int mv643xx_eth_shared_probe(struct platform_device *pdev)
 
 	msp->tx_csum_limit = (pd != NULL && pd->tx_csum_limit) ?
 					pd->tx_csum_limit : 9 * 1024;
+
+	if (pdev->dev.of_node)
+		kfree(pd);  /* If we created a fake pd, free it now */
+
 	infer_hw_params(msp);
 
 	platform_set_drvdata(pdev, msp);
@@ -2708,12 +2734,21 @@  static int mv643xx_eth_shared_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id mv_mdio_dt_ids[] __devinitdata = {
+	{ .compatible = "marvell,mdio-mv643xx", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mv_mdio_dt_ids);
+#endif
+
 static struct platform_driver mv643xx_eth_shared_driver = {
 	.probe		= mv643xx_eth_shared_probe,
 	.remove		= mv643xx_eth_shared_remove,
 	.driver = {
 		.name	= MV643XX_ETH_SHARED_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(mv_mdio_dt_ids),
 	},
 };
 
@@ -2873,7 +2908,36 @@  static int mv643xx_eth_probe(struct platform_device *pdev)
 	struct resource *res;
 	int err;
 
-	pd = pdev->dev.platform_data;
+	if (pdev->dev.of_node) {
+		struct device_node *np = NULL;
+
+		/* when all users of this driver use FDT, we can remove this */
+		pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+		if (!pd) {
+			dev_dbg(&pdev->dev, "Could not allocate platform data\n");
+			return -ENOMEM;
+		}
+
+		of_property_read_u32(pdev->dev.of_node,
+			"port_number", &pd->port_number);
+
+		if (!of_property_read_u32(pdev->dev.of_node,
+				"phy_addr", &pd->phy_addr))
+			pd->phy_addr = MV643XX_ETH_PHY_ADDR(pd->phy_addr);
+		else
+			pd->phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT;
+
+		np = of_parse_phandle(pdev->dev.of_node, "mdio", 0);
+		if (np) {
+			pd->shared = of_find_device_by_node(np);
+		} else {
+			kfree(pd);
+			return -ENODEV;
+		}
+	} else {
+		pd = pdev->dev.platform_data;
+	}
+
 	if (pd == NULL) {
 		dev_err(&pdev->dev, "no mv643xx_eth_platform_data\n");
 		return -ENODEV;
@@ -2881,12 +2945,15 @@  static int mv643xx_eth_probe(struct platform_device *pdev)
 
 	if (pd->shared == NULL) {
 		dev_err(&pdev->dev, "no mv643xx_eth_platform_data->shared\n");
-		return -ENODEV;
+		err = -ENODEV;
+		goto out_free_pd;
 	}
 
 	dev = alloc_etherdev_mq(sizeof(struct mv643xx_eth_private), 8);
-	if (!dev)
-		return -ENOMEM;
+	if (!dev) {
+		err = -ENOMEM;
+		goto out_free_pd;
+	}
 
 	mp = netdev_priv(dev);
 	platform_set_drvdata(pdev, mp);
@@ -2923,6 +2990,8 @@  static int mv643xx_eth_probe(struct platform_device *pdev)
 
 	init_pscr(mp, pd->speed, pd->duplex);
 
+	if (pdev->dev.of_node)
+		kfree(pd); /* If we created a fake pd, free it now */
 
 	mib_counters_clear(mp);
 
@@ -2942,7 +3011,6 @@  static int mv643xx_eth_probe(struct platform_device *pdev)
 	mp->rx_oom.data = (unsigned long)mp;
 	mp->rx_oom.function = oom_timer_wrapper;
 
-
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	BUG_ON(!res);
 	dev->irq = res->start;
@@ -2991,6 +3059,8 @@  out:
 	}
 #endif
 	free_netdev(dev);
+out_free_pd:
+	kfree(pd);
 
 	return err;
 }
@@ -3030,6 +3100,14 @@  static void mv643xx_eth_shutdown(struct platform_device *pdev)
 		port_reset(mp);
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id mv_eth_dt_ids[] __devinitdata = {
+	{ .compatible = "marvell,mv643xx-eth", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mv_eth_dt_ids);
+#endif
+
 static struct platform_driver mv643xx_eth_driver = {
 	.probe		= mv643xx_eth_probe,
 	.remove		= mv643xx_eth_remove,
@@ -3037,6 +3115,7 @@  static struct platform_driver mv643xx_eth_driver = {
 	.driver = {
 		.name	= MV643XX_ETH_NAME,
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(mv_eth_dt_ids),
 	},
 };