Patchwork [v2] esp: add Tekram DC-390 emulation (PC SCSI adapter)

login
register
mail settings
Submitter Paolo Bonzini
Date Aug. 2, 2012, 2:55 p.m.
Message ID <501A94D0.3080502@redhat.com>
Download mbox | patch
Permalink /patch/174765/
State New
Headers show

Comments

Paolo Bonzini - Aug. 2, 2012, 2:55 p.m.
Il 02/08/2012 10:37, Hervé Poussineau ha scritto:
> Difference with AMD PCscsi is that DC-390 contains a EEPROM,
> and that a romfile is available to add INT13 support.
> 
> This has been successfully tested on:
> - MS DOS 6.22 (using DC390 ASPI driver)
> - MS Windows 98 SE (using DC390 driver)
> - MS Windows NT 3.1 (using DC390 driver)
> - MS Windows NT 4.0 (using DC390 driver)
> - hard disk and cdrom boot
> 
> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>

I can take this patch in the SCSI tree, but... do we really need two
models, considering that the PCI id is the same and that (for the
coolness factor of installing NT 3.1 onto an empty VM) we can just add
ESP support to SeaBIOS?  Does the option ROM not work without the EEPROM?

(Regarding ESP support in SeaBIOS, I have an almost working patch;
however, Windows XP setup fails at "Starting Windows" and I don't have
any older images nor time to investigate... I attach both the QEMU and
SeaBIOS changes, feel free to pick them up).

Paolo
Hervé Poussineau - Aug. 2, 2012, 3:09 p.m.
Paolo Bonzini a écrit :
> Il 02/08/2012 10:37, Hervé Poussineau ha scritto:
>> Difference with AMD PCscsi is that DC-390 contains a EEPROM,
>> and that a romfile is available to add INT13 support.
>>
>> This has been successfully tested on:
>> - MS DOS 6.22 (using DC390 ASPI driver)
>> - MS Windows 98 SE (using DC390 driver)
>> - MS Windows NT 3.1 (using DC390 driver)
>> - MS Windows NT 4.0 (using DC390 driver)
>> - hard disk and cdrom boot
>>
>> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
> 
> I can take this patch in the SCSI tree, but... do we really need two
> models, considering that the PCI id is the same and that (for the
> coolness factor of installing NT 3.1 onto an empty VM) we can just add
> ESP support to SeaBIOS?  Does the option ROM not work without the EEPROM?

No, the option ROM requires the EEPROM.

DC-390 also has a very broad support with (at least):
- SCO Unix 3.2/v4.x
- SCO OpenServer 5.0.x
- NetWare 3.11/3.12/SFT-III
- NetWare 4.00/4.01/4.02/4.1x
- OS/2 v2.0/2.1/2.11/WARP 3.0 & 4.0
- Windows NT 3.51/4.x
- Windows NT 3.1/3.5
- Windows 3.x & WFWG 3.x
- Windows 95 (OSR2) & Windows 98
where a driver is provided by Tekram, but the ones I tried require the 
EEPROM too.
I'm not sure you'll be able to find as much drivers for this card, which 
don't require the EEPROM (except the default driver on Windows 98 SE and 
NT 4.0)

> 
> (Regarding ESP support in SeaBIOS, I have an almost working patch;
> however, Windows XP setup fails at "Starting Windows" and I don't have
> any older images nor time to investigate... I attach both the QEMU and
> SeaBIOS changes, feel free to pick them up).

BTW, ack for your QEMU changes, if you want to put them in your tree...

Regards,

Hervé
Hervé Poussineau - Aug. 2, 2012, 3:09 p.m.
Paolo Bonzini a écrit :
> Il 02/08/2012 10:37, Hervé Poussineau ha scritto:
>> Difference with AMD PCscsi is that DC-390 contains a EEPROM,
>> and that a romfile is available to add INT13 support.
>>
>> This has been successfully tested on:
>> - MS DOS 6.22 (using DC390 ASPI driver)
>> - MS Windows 98 SE (using DC390 driver)
>> - MS Windows NT 3.1 (using DC390 driver)
>> - MS Windows NT 4.0 (using DC390 driver)
>> - hard disk and cdrom boot
>>
>> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
> 
> I can take this patch in the SCSI tree, but... do we really need two
> models, considering that the PCI id is the same and that (for the
> coolness factor of installing NT 3.1 onto an empty VM) we can just add
> ESP support to SeaBIOS?  Does the option ROM not work without the EEPROM?

No, the option ROM requires the EEPROM.

DC-390 also has a very broad support with (at least):
- SCO Unix 3.2/v4.x
- SCO OpenServer 5.0.x
- NetWare 3.11/3.12/SFT-III
- NetWare 4.00/4.01/4.02/4.1x
- OS/2 v2.0/2.1/2.11/WARP 3.0 & 4.0
- Windows NT 3.51/4.x
- Windows NT 3.1/3.5
- Windows 3.x & WFWG 3.x
- Windows 95 (OSR2) & Windows 98
where a driver is provided by Tekram, but the ones I tried require the 
EEPROM too.
I'm not sure you'll be able to find as much drivers for this card, which 
don't require the EEPROM (except the default driver on Windows 98 SE and 
NT 4.0)

> 
> (Regarding ESP support in SeaBIOS, I have an almost working patch;
> however, Windows XP setup fails at "Starting Windows" and I don't have
> any older images nor time to investigate... I attach both the QEMU and
> SeaBIOS changes, feel free to pick them up).

BTW, ack for your QEMU changes, if you want to commit them via your tree...

Regards,

Hervé
Paolo Bonzini - Aug. 2, 2012, 3:12 p.m.
Il 02/08/2012 17:09, Hervé Poussineau ha scritto:
> Paolo Bonzini a écrit :
>> Il 02/08/2012 10:37, Hervé Poussineau ha scritto:
>>> Difference with AMD PCscsi is that DC-390 contains a EEPROM,
>>> and that a romfile is available to add INT13 support.
>>>
>>> This has been successfully tested on:
>>> - MS DOS 6.22 (using DC390 ASPI driver)
>>> - MS Windows 98 SE (using DC390 driver)
>>> - MS Windows NT 3.1 (using DC390 driver)
>>> - MS Windows NT 4.0 (using DC390 driver)
>>> - hard disk and cdrom boot
>>>
>>> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
>>
>> I can take this patch in the SCSI tree, but... do we really need two
>> models, considering that the PCI id is the same and that (for the
>> coolness factor of installing NT 3.1 onto an empty VM) we can just add
>> ESP support to SeaBIOS?  Does the option ROM not work without the EEPROM?
> 
> No, the option ROM requires the EEPROM.

Ok, then let's add the EEPROM unconditionally?

>> (Regarding ESP support in SeaBIOS, I have an almost working patch;
>> however, Windows XP setup fails at "Starting Windows" and I don't have
>> any older images nor time to investigate... I attach both the QEMU and
>> SeaBIOS changes, feel free to pick them up).
> 
> BTW, ack for your QEMU changes, if you want to put them in your tree...

Thanks.  I must have an NT 4.0 CD somewhere, just need to find it... :)

Paolo
Paolo Bonzini - Aug. 2, 2012, 4:26 p.m.
Il 02/08/2012 17:12, Paolo Bonzini ha scritto:
>>> >> I can take this patch in the SCSI tree, but... do we really need two
>>> >> models, considering that the PCI id is the same and that (for the
>>> >> coolness factor of installing NT 3.1 onto an empty VM) we can just add
>>> >> ESP support to SeaBIOS?  Does the option ROM not work without the EEPROM?
>> > 
>> > No, the option ROM requires the EEPROM.
> Ok, then let's add the EEPROM unconditionally?

Nah, applied to scsi-next branch as is.  Thanks!

Paolo

Patch

From 59d5f4c18187a0b20ab4e1b93f4619e48f909df8 Mon Sep 17 00:00:00 2001
From: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu, 2 Aug 2012 14:56:05 +0200
Subject: [PATCH] scsi: add AMD PCscsi driver
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

This is a driver for an AMD PCscsi (am53c974) SCSI card.  It can be
used together with DOS or old operating systems such as Windows NT 3.1,
Windows 3.1 or Windows 98.

Cc: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
 Makefile       |    2 +-
 src/Kconfig    |    6 ++
 src/block.c    |    1 +
 src/blockcmd.c |    3 +
 src/disk.h     |    1 +
 src/esp-scsi.c |  231 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 src/post.c     |    2 +
 7 files changed, 245 insertions(+), 1 deletion(-)
 create mode 100644 src/esp-scsi.c

diff --git a/Makefile b/Makefile
index 1167799..4dce77b 100644
--- a/Makefile
+++ b/Makefile
@@ -13,7 +13,7 @@  SRCBOTH=misc.c stacks.c pmm.c output.c util.c block.c floppy.c ata.c mouse.c \
     pnpbios.c pirtable.c vgahooks.c ramdisk.c pcibios.c blockcmd.c \
     usb.c usb-uhci.c usb-ohci.c usb-ehci.c usb-hid.c usb-msc.c \
     virtio-ring.c virtio-pci.c virtio-blk.c virtio-scsi.c apm.c ahci.c \
-    usb-uas.c lsi-scsi.c
+    usb-uas.c lsi-scsi.c esp-scsi.c
 SRC16=$(SRCBOTH) system.c disk.c font.c
 SRC32FLAT=$(SRCBOTH) post.c shadow.c memmap.c coreboot.c boot.c \
     acpi.c smm.c mptable.c smbios.c pciinit.c optionroms.c mtrr.c \
diff --git a/src/Kconfig b/src/Kconfig
index bc343ee..6de3e71 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -119,6 +119,12 @@  menu "Hardware support"
         default y
         help
             Support boot from virtio-scsi storage.
+    config ESP_SCSI
+        depends on DRIVES && !COREBOOT
+        bool "AMD PCscsi controllers"
+        default y
+        help
+            Support boot from AMD PCscsi storage.
     config LSI_SCSI
         depends on DRIVES && !COREBOOT
         bool "lsi53c895a scsi controllers"
diff --git a/src/block.c b/src/block.c
index 1c200cc..243428e 100644
--- a/src/block.c
+++ b/src/block.c
@@ -335,6 +335,7 @@  process_op(struct disk_op_s *op)
     case DTYPE_UAS:
     case DTYPE_VIRTIO_SCSI:
     case DTYPE_LSI_SCSI:
+    case DTYPE_ESP_SCSI:
         return process_scsi_op(op);
     default:
         op->count = 0;
diff --git a/src/blockcmd.c b/src/blockcmd.c
index 4365650..97c72a6 100644
--- a/src/blockcmd.c
+++ b/src/blockcmd.c
@@ -15,6 +15,7 @@ 
 #include "usb-uas.h" // usb_cmd_data
 #include "virtio-scsi.h" // virtio_scsi_cmd_data
 #include "lsi-scsi.h" // lsi_scsi_cmd_data
+#include "esp-scsi.h" // esp_scsi_cmd_data
 #include "boot.h" // boot_add_hd
 
 // Route command to low-level handler.
@@ -35,6 +36,8 @@  cdb_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize)
         return virtio_scsi_cmd_data(op, cdbcmd, blocksize);
     case DTYPE_LSI_SCSI:
         return lsi_scsi_cmd_data(op, cdbcmd, blocksize);
+    case DTYPE_ESP_SCSI:
+        return esp_scsi_cmd_data(op, cdbcmd, blocksize);
     default:
         op->count = 0;
         return DISK_RET_EPARAM;
diff --git a/src/disk.h b/src/disk.h
index 2b2511f..3d07372 100644
--- a/src/disk.h
+++ b/src/disk.h
@@ -234,6 +234,7 @@  struct drive_s {
 #define DTYPE_USB          0x0a
 #define DTYPE_UAS          0x0b
 #define DTYPE_LSI_SCSI     0x0c
+#define DTYPE_ESP_SCSI     0x0d
 
 #define MAXDESCSIZE 80
 
diff --git a/src/esp-scsi.c b/src/esp-scsi.c
new file mode 100644
index 0000000..daafa1e
--- /dev/null
+++ b/src/esp-scsi.c
@@ -0,0 +1,231 @@ 
+// AMD PCscsi boot support.
+//
+// Copyright (C) 2012 Red Hat Inc.
+//
+// Authors:
+//  Paolo Bonzini <pbonzini@redhat.com>
+//
+// based on lsi-scsi.c which is written by:
+//  Gerd Hoffman <kraxel@redhat.com>
+//
+// This file may be distributed under the terms of the GNU LGPLv3 license.
+
+#include "util.h" // dprintf
+#include "pci.h" // foreachpci
+#include "config.h" // CONFIG_*
+#include "biosvar.h" // GET_GLOBAL
+#include "pci_ids.h" // PCI_DEVICE_ID
+#include "pci_regs.h" // PCI_VENDOR_ID
+#include "boot.h" // bootprio_find_scsi_device
+#include "blockcmd.h" // scsi_init_drive
+#include "disk.h"
+
+#define ESP_TCLO      0x00
+#define ESP_TCMID     0x04
+#define ESP_FIFO      0x08
+#define ESP_CMD       0x0c
+#define ESP_WBUSID    0x10
+#define ESP_TCHI      0x38
+
+#define ESP_RSTAT     0x10
+#define ESP_RINTR     0x14
+#define ESP_RFLAGS    0x1c
+
+#define ESP_DMA_CMD   0x40
+#define ESP_DMA_STC   0x44
+#define ESP_DMA_SPA   0x48
+#define ESP_DMA_WBC   0x4c
+#define ESP_DMA_WAC   0x50
+#define ESP_DMA_STAT  0x54
+#define ESP_DMA_SMDLA 0x58
+#define ESP_DMA_WMAC  0x58c
+
+#define ESP_CMD_DMA      0x80
+#define ESP_CMD_RESET    0x02
+#define ESP_CMD_TI       0x10
+#define ESP_CMD_ICCS     0x11
+#define ESP_CMD_SELATN   0x42
+
+#define ESP_STAT_DI      0x01
+#define ESP_STAT_CD      0x02
+#define ESP_STAT_MSG     0x04
+#define ESP_STAT_TC      0x10
+
+#define ESP_INTR_DC      0x20
+
+struct esp_lun_s {
+    struct drive_s drive;
+    struct pci_device *pci;
+    u32 iobase;
+    u8 target;
+    u8 lun;
+};
+
+static void
+esp_scsi_dma(u32 iobase, u32 buf, u32 len, int read)
+{
+    outb(len         & 0xff, iobase + ESP_TCLO);
+    outb((len >> 8)  & 0xff, iobase + ESP_TCMID);
+    outb((len >> 16) & 0xff, iobase + ESP_TCHI);
+    outl(buf,                iobase + ESP_DMA_SPA);
+    outl(len,                iobase + ESP_DMA_STC);
+    outb(read ? 0x83 : 0x03, iobase + ESP_DMA_CMD);
+}
+
+static int
+esp_scsi_cmd(struct esp_lun_s *llun, struct disk_op_s *op,
+             u8 *cdbcmd, u16 target, u16 lun, u16 blocksize)
+{
+    u32 iobase = GET_GLOBAL(llun->iobase);
+    int i, state;
+    u8 status;
+
+    outb(target, iobase + ESP_WBUSID);
+
+    /*
+     * We need to pass the LUN at the beginning of the command, and the FIFO
+     * is only 16 bytes, so we cannot support 16-byte CDBs.  The alternative
+     * would be to use DMA for the 17-byte command too, which is quite
+     * overkill.
+     */
+    outb(lun, iobase + ESP_FIFO);
+    cdbcmd[1] &= 0x1f;
+    cdbcmd[1] |= lun << 5;
+    for (i = 0; i < 12; i++)
+        outb(cdbcmd[i], iobase + ESP_FIFO);
+    outb(ESP_CMD_SELATN, iobase + ESP_CMD);
+
+    for (state = 0;;) {
+        u8 stat = inb(iobase + ESP_RSTAT);
+
+        /* Detect disconnected device.  */
+        if (state == 0 && (inb(iobase + ESP_RINTR) & ESP_INTR_DC)) {
+            return DISK_RET_ENOTREADY;
+        }
+
+        /* HBA reads command, clears CD, sets TC -> do DMA if needed.  */
+        if (state == 0 && (stat & ESP_STAT_TC)) {
+            state++;
+            if (op->count && blocksize) {
+                /* Data phase.  */
+                u32 count = (u32)op->count * blocksize;
+                esp_scsi_dma(iobase, (u32)op->buf_fl, count,
+                             cdb_is_read(cdbcmd, blocksize));
+                outb(ESP_CMD_TI | ESP_CMD_DMA,   iobase + ESP_CMD);
+                continue;
+            }
+        }
+
+	/* At end of DMA TC is set again -> complete command.  */
+        if (state == 1 && (stat & ESP_STAT_TC)) {
+            state++;
+            outb(ESP_CMD_ICCS, iobase + ESP_CMD);
+            continue;
+        }
+
+	/* Finally read data from the message in phase.  */
+        if (state == 2 && (stat & ESP_STAT_MSG)) {
+            state++;
+            status = inb(iobase + ESP_FIFO);
+            inb(iobase + ESP_FIFO);
+            break;
+        }
+        usleep(5);
+    }
+
+    if (status == 0) {
+        return DISK_RET_SUCCESS;
+    }
+
+    return DISK_RET_EBADTRACK;
+}
+
+int
+esp_scsi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize)
+{
+    if (!CONFIG_ESP_SCSI)
+        return DISK_RET_EBADTRACK;
+
+    struct esp_lun_s *llun =
+        container_of(op->drive_g, struct esp_lun_s, drive);
+
+    return esp_scsi_cmd(llun, op, cdbcmd,
+                        GET_GLOBAL(llun->target), GET_GLOBAL(llun->lun),
+                        blocksize);
+}
+
+static int
+esp_scsi_add_lun(struct pci_device *pci, u32 iobase, u8 target, u8 lun)
+{
+    struct esp_lun_s *llun = malloc_fseg(sizeof(*llun));
+    if (!llun) {
+        warn_noalloc();
+        return -1;
+    }
+    memset(llun, 0, sizeof(*llun));
+    llun->drive.type = DTYPE_ESP_SCSI;
+    llun->drive.cntl_id = pci->bdf;
+    llun->pci = pci;
+    llun->target = target;
+    llun->lun = lun;
+    llun->iobase = iobase;
+
+    char *name = znprintf(16, "esp %02x:%02x.%x %d:%d",
+                          pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf),
+                          pci_bdf_to_fn(pci->bdf), target, lun);
+    int prio = bootprio_find_scsi_device(pci, target, lun);
+    int ret = scsi_init_drive(&llun->drive, name, prio);
+    free(name);
+    if (ret)
+        goto fail;
+    return 0;
+
+fail:
+    free(llun);
+    return -1;
+}
+
+static void
+esp_scsi_scan_target(struct pci_device *pci, u32 iobase, u8 target)
+{
+    esp_scsi_add_lun(pci, iobase, target, 0);
+}
+
+static void
+init_esp_scsi(struct pci_device *pci)
+{
+    u16 bdf = pci->bdf;
+    u32 iobase = pci_config_readl(pci->bdf, PCI_BASE_ADDRESS_0)
+        & PCI_BASE_ADDRESS_IO_MASK;
+
+    dprintf(1, "found esp at %02x:%02x.%x, io @ %x\n",
+            pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf),
+            pci_bdf_to_fn(bdf), iobase);
+
+    // reset
+    outb(ESP_CMD_RESET, iobase + ESP_CMD);
+
+    int i;
+    for (i = 0; i <= 7; i++)
+        esp_scsi_scan_target(pci, iobase, i);
+
+    return;
+}
+
+void
+esp_scsi_setup(void)
+{
+    ASSERT32FLAT();
+    if (!CONFIG_ESP_SCSI)
+        return;
+
+    dprintf(3, "init esp\n");
+
+    struct pci_device *pci;
+    foreachpci(pci) {
+        if (pci->vendor != PCI_VENDOR_ID_AMD
+            || pci->device != PCI_DEVICE_ID_AMD_SCSI)
+            continue;
+        init_esp_scsi(pci);
+    }
+}
diff --git a/src/post.c b/src/post.c
index 0f31b4c..924b311 100644
--- a/src/post.c
+++ b/src/post.c
@@ -28,6 +28,7 @@ 
 #include "virtio-blk.h" // virtio_blk_setup
 #include "virtio-scsi.h" // virtio_scsi_setup
 #include "lsi-scsi.h" // lsi_scsi_setup
+#include "esp-scsi.h" // esp_scsi_setup
 
 
 /****************************************************************
@@ -196,6 +197,7 @@  init_hw(void)
     virtio_blk_setup();
     virtio_scsi_setup();
     lsi_scsi_setup();
+    esp_scsi_setup();
 }
 
 // Begin the boot process by invoking an int0x19 in 16bit mode.
-- 
1.7.10.4