@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-COBJS = timer.o clock.o
+COBJS = timer.o clock.o prcmu.o
SOBJS = lowlevel.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
new file mode 100644
@@ -0,0 +1,164 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson SA
+ *
+ * Adapted from the Linux version:
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+/*
+ * NOTE: This currently does not support the I2C workaround access method.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/prcmu.h>
+
+/* CPU mailbox registers */
+#define PRCM_MBOX_CPU_VAL (U8500_PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET (U8500_PRCMU_BASE + 0x100)
+#define PRCM_MBOX_CPU_CLR (U8500_PRCMU_BASE + 0x104)
+
+static int prcmu_is_ready(void)
+{
+ int ready = readb(PRCM_XP70_CUR_PWR_STATE) == AP_EXECUTE;
+ if (!ready)
+ printf("PRCMU firmware not ready\n");
+ return ready;
+}
+
+static int _wait_for_req_complete(int num)
+{
+ int timeout = 1000;
+
+ /* checking any already on-going transaction */
+ while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout)
+ timeout--;
+
+ timeout = 1000;
+
+ /* Set an interrupt to XP70 */
+ writel(1 << num, PRCM_MBOX_CPU_SET);
+
+ while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout)
+ timeout--;
+
+ if (!timeout) {
+ printf("PRCMU operation timed out\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/**
+ * prcmu_i2c_read - PRCMU - 4500 communication using PRCMU I2C
+ * @reg: - db8500 register bank to be accessed
+ * @slave: - db8500 register to be accessed
+ * Returns: ACK_MB5 value containing the status
+ */
+int prcmu_i2c_read(u8 reg, u16 slave)
+{
+ uint8_t i2c_status;
+ uint8_t i2c_val;
+
+ if (!prcmu_is_ready())
+ return -1;
+
+ debug("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n",
+ reg, slave);
+
+ /* prepare the data for mailbox 5 */
+ writeb((reg << 1) | I2CREAD, PRCM_REQ_MB5_I2COPTYPE_REG);
+ writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS);
+ writeb(slave, PRCM_REQ_MB5_I2CSLAVE);
+ writeb(0, PRCM_REQ_MB5_I2CVAL);
+
+ _wait_for_req_complete(REQ_MB5);
+
+ /* retrieve values */
+ debug("ack-mb5:transfer status = %x\n",
+ readb(PRCM_ACK_MB5_STATUS));
+ debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1);
+ debug("ack-mb5:slave_add = %x\n",
+ readb(PRCM_ACK_MB5_SLAVE));
+ debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL));
+
+ i2c_status = readb(PRCM_ACK_MB5_STATUS);
+ i2c_val = readb(PRCM_ACK_MB5_VAL);
+
+ if (i2c_status == I2C_RD_OK)
+ return i2c_val;
+ else {
+
+ printf("prcmu_i2c_read:read return status= %d\n",
+ i2c_status);
+ return -1;
+ }
+
+}
+
+/**
+ * prcmu_i2c_write - PRCMU-db8500 communication using PRCMU I2C
+ * @reg: - db8500 register bank to be accessed
+ * @slave: - db800 register to be written to
+ * @reg_data: - the data to write
+ * Returns: ACK_MB5 value containing the status
+ */
+int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data)
+{
+ uint8_t i2c_status;
+
+ if (!prcmu_is_ready())
+ return -1;
+
+ debug("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n",
+ reg, slave);
+
+ /* prepare the data for mailbox 5 */
+ writeb((reg << 1) | I2CWRITE, PRCM_REQ_MB5_I2COPTYPE_REG);
+ writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS);
+ writeb(slave, PRCM_REQ_MB5_I2CSLAVE);
+ writeb(reg_data, PRCM_REQ_MB5_I2CVAL);
+
+ debug("\ncpu_is_u8500v11\n");
+ _wait_for_req_complete(REQ_MB5);
+
+ /* retrieve values */
+ debug("ack-mb5:transfer status = %x\n",
+ readb(PRCM_ACK_MB5_STATUS));
+ debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1);
+ debug("ack-mb5:slave_add = %x\n",
+ readb(PRCM_ACK_MB5_SLAVE));
+ debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL));
+
+ i2c_status = readb(PRCM_ACK_MB5_STATUS);
+ debug("\ni2c_status = %x\n", i2c_status);
+ if (i2c_status == I2C_WR_OK)
+ return 0;
+ else {
+ printf("ape-i2c: i2c_status : 0x%x\n", i2c_status);
+ return -1;
+ }
+}
new file mode 100644
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson SA
+ *
+ * Copied from the Linux version:
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __MACH_PRCMU_FW_V1_H
+#define __MACH_PRCMU_FW_V1_H
+
+#define AP_EXECUTE 2
+#define I2CREAD 1
+#define I2C_WR_OK 1
+#define I2C_RD_OK 2
+#define I2CWRITE 0
+
+#define _PRCMU_TCDM_BASE U8500_PRCMU_TCDM_BASE
+#define PRCM_XP70_CUR_PWR_STATE (_PRCMU_TCDM_BASE + 0xFFC) /* 4 BYTES */
+
+#define PRCM_REQ_MB5 (_PRCMU_TCDM_BASE + 0xE44) /* 4 bytes */
+#define PRCM_ACK_MB5 (_PRCMU_TCDM_BASE + 0xDF4) /* 4 bytes */
+
+/* Mailbox 5 Requests */
+#define PRCM_REQ_MB5_I2COPTYPE_REG (PRCM_REQ_MB5 + 0x0)
+#define PRCM_REQ_MB5_BIT_FIELDS (PRCM_REQ_MB5 + 0x1)
+#define PRCM_REQ_MB5_I2CSLAVE (PRCM_REQ_MB5 + 0x2)
+#define PRCM_REQ_MB5_I2CVAL (PRCM_REQ_MB5 + 0x3)
+
+/* Mailbox 5 ACKs */
+#define PRCM_ACK_MB5_STATUS (PRCM_ACK_MB5 + 0x1)
+#define PRCM_ACK_MB5_SLAVE (PRCM_ACK_MB5 + 0x2)
+#define PRCM_ACK_MB5_VAL (PRCM_ACK_MB5 + 0x3)
+
+#define LOW_POWER_WAKEUP 1
+#define EXE_WAKEUP 0
+
+#define REQ_MB5 5
+
+extern int prcmu_i2c_read(u8 reg, u16 slave);
+extern int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data);
+
+#endif /* __MACH_PRCMU_FW_V1_H */
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
CFLAGS += -D__RELEASE -D__STN_8500
LIB = $(obj)lib$(BOARD).o
-COBJS := u8500_href.o gpio.o prcmu.o
+COBJS := u8500_href.o gpio.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
deleted file mode 100644
@@ -1,55 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson SA
- *
- * Copied from the Linux version:
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#ifndef __MACH_PRCMU_FW_V1_H
-#define __MACH_PRCMU_FW_V1_H
-
-#define AP_EXECUTE 2
-#define I2CREAD 1
-#define I2C_WR_OK 1
-#define I2C_RD_OK 2
-#define I2CWRITE 0
-
-#define _PRCMU_TCDM_BASE U8500_PRCMU_TCDM_BASE
-#define PRCM_XP70_CUR_PWR_STATE (_PRCMU_TCDM_BASE + 0xFFC) /* 4 BYTES */
-
-#define PRCM_REQ_MB5 (_PRCMU_TCDM_BASE + 0xE44) /* 4 bytes */
-#define PRCM_ACK_MB5 (_PRCMU_TCDM_BASE + 0xDF4) /* 4 bytes */
-
-/* Mailbox 5 Requests */
-#define PRCM_REQ_MB5_I2COPTYPE_REG (PRCM_REQ_MB5 + 0x0)
-#define PRCM_REQ_MB5_BIT_FIELDS (PRCM_REQ_MB5 + 0x1)
-#define PRCM_REQ_MB5_I2CSLAVE (PRCM_REQ_MB5 + 0x2)
-#define PRCM_REQ_MB5_I2CVAL (PRCM_REQ_MB5 + 0x3)
-
-/* Mailbox 5 ACKs */
-#define PRCM_ACK_MB5_STATUS (PRCM_ACK_MB5 + 0x1)
-#define PRCM_ACK_MB5_SLAVE (PRCM_ACK_MB5 + 0x2)
-#define PRCM_ACK_MB5_VAL (PRCM_ACK_MB5 + 0x3)
-
-#define LOW_POWER_WAKEUP 1
-#define EXE_WAKEUP 0
-
-#define REQ_MB5 5
-
-extern int prcmu_i2c_read(u8 reg, u16 slave);
-extern int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data);
-
-#endif /* __MACH_PRCMU_FW_V1_H */
deleted file mode 100644
@@ -1,165 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson SA
- *
- * Adapted from the Linux version:
- * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- */
-
-/*
- * NOTE: This currently does not support the I2C workaround access method.
- */
-
-#include <common.h>
-#include <config.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/types.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-
-#include "prcmu-fw.h"
-
-/* CPU mailbox registers */
-#define PRCM_MBOX_CPU_VAL (U8500_PRCMU_BASE + 0x0fc)
-#define PRCM_MBOX_CPU_SET (U8500_PRCMU_BASE + 0x100)
-#define PRCM_MBOX_CPU_CLR (U8500_PRCMU_BASE + 0x104)
-
-static int prcmu_is_ready(void)
-{
- int ready = readb(PRCM_XP70_CUR_PWR_STATE) == AP_EXECUTE;
- if (!ready)
- printf("PRCMU firmware not ready\n");
- return ready;
-}
-
-static int _wait_for_req_complete(int num)
-{
- int timeout = 1000;
-
- /* checking any already on-going transaction */
- while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout--)
- ;
-
- timeout = 1000;
-
- /* Set an interrupt to XP70 */
- writel(1 << num, PRCM_MBOX_CPU_SET);
-
- while ((readl(PRCM_MBOX_CPU_VAL) & (1 << num)) && timeout--)
- ;
-
- if (!timeout) {
- printf("PRCMU operation timed out\n");
- return -1;
- }
-
- return 0;
-}
-
-/**
- * prcmu_i2c_read - PRCMU - 4500 communication using PRCMU I2C
- * @reg: - db8500 register bank to be accessed
- * @slave: - db8500 register to be accessed
- * Returns: ACK_MB5 value containing the status
- */
-int prcmu_i2c_read(u8 reg, u16 slave)
-{
- uint8_t i2c_status;
- uint8_t i2c_val;
-
- if (!prcmu_is_ready())
- return -1;
-
- debug("\nprcmu_4500_i2c_read:bank=%x;reg=%x;\n",
- reg, slave);
-
- /* prepare the data for mailbox 5 */
- writeb((reg << 1) | I2CREAD, PRCM_REQ_MB5_I2COPTYPE_REG);
- writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS);
- writeb(slave, PRCM_REQ_MB5_I2CSLAVE);
- writeb(0, PRCM_REQ_MB5_I2CVAL);
-
- _wait_for_req_complete(REQ_MB5);
-
- /* retrieve values */
- debug("ack-mb5:transfer status = %x\n",
- readb(PRCM_ACK_MB5_STATUS));
- debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1);
- debug("ack-mb5:slave_add = %x\n",
- readb(PRCM_ACK_MB5_SLAVE));
- debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL));
-
- i2c_status = readb(PRCM_ACK_MB5_STATUS);
- i2c_val = readb(PRCM_ACK_MB5_VAL);
-
- if (i2c_status == I2C_RD_OK)
- return i2c_val;
- else {
-
- printf("prcmu_i2c_read:read return status= %d\n",
- i2c_status);
- return -1;
- }
-
-}
-
-/**
- * prcmu_i2c_write - PRCMU-db8500 communication using PRCMU I2C
- * @reg: - db8500 register bank to be accessed
- * @slave: - db800 register to be written to
- * @reg_data: - the data to write
- * Returns: ACK_MB5 value containing the status
- */
-int prcmu_i2c_write(u8 reg, u16 slave, u8 reg_data)
-{
- uint8_t i2c_status;
-
- if (!prcmu_is_ready())
- return -1;
-
- debug("\nprcmu_4500_i2c_write:bank=%x;reg=%x;\n",
- reg, slave);
-
- /* prepare the data for mailbox 5 */
- writeb((reg << 1) | I2CWRITE, PRCM_REQ_MB5_I2COPTYPE_REG);
- writeb((1 << 3) | 0x0, PRCM_REQ_MB5_BIT_FIELDS);
- writeb(slave, PRCM_REQ_MB5_I2CSLAVE);
- writeb(reg_data, PRCM_REQ_MB5_I2CVAL);
-
- debug("\ncpu_is_u8500v11\n");
- _wait_for_req_complete(REQ_MB5);
-
- /* retrieve values */
- debug("ack-mb5:transfer status = %x\n",
- readb(PRCM_ACK_MB5_STATUS));
- debug("ack-mb5:reg bank = %x\n", readb(PRCM_ACK_MB5) >> 1);
- debug("ack-mb5:slave_add = %x\n",
- readb(PRCM_ACK_MB5_SLAVE));
- debug("ack-mb5:reg_val = %d\n", readb(PRCM_ACK_MB5_VAL));
-
- i2c_status = readb(PRCM_ACK_MB5_STATUS);
- debug("\ni2c_status = %x\n", i2c_status);
- if (i2c_status == I2C_WR_OK)
- return 0;
- else {
- printf("ape-i2c: i2c_status : 0x%x\n", i2c_status);
- return -1;
- }
-}
@@ -27,7 +27,7 @@
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#ifdef CONFIG_MMC
-#include "prcmu-fw.h"
+#include <asm/arch/prcmu.h>
#include "../../../drivers/mmc/arm_pl180_mmci.h"
#endif