diff --git a/gcc/config/rs6000/constraints.md b/gcc/config/rs6000/constraints.md
index e53320e..4a153d4 100644
--- a/gcc/config/rs6000/constraints.md
+++ b/gcc/config/rs6000/constraints.md
@@ -1,5 +1,5 @@
 ;; Constraint definitions for RS6000
-;; Copyright (C) 2006, 2007, 2009, 2010 Free Software Foundation, Inc.
+;; Copyright (C) 2006-2012 Free Software Foundation, Inc.
 ;;
 ;; This file is part of GCC.
 ;;
@@ -17,7 +17,7 @@
 ;; along with GCC; see the file COPYING3.  If not see
 ;; <http://www.gnu.org/licenses/>.
 
-;; Available constraint letters: "e", "k", "u", "A", "B", "C", "D"
+;; Available constraint letters: "e", "k", "q", "u", "A", "B", "C", "D"
 
 ;; Register constraints
 
@@ -33,9 +33,6 @@ (define_register_constraint "b" "BASE_REGS"
 (define_register_constraint "h" "SPECIAL_REGS"
   "@internal")
 
-(define_register_constraint "q" "MQ_REGS"
-  "@internal")
-
 (define_register_constraint "c" "CTR_REGS"
   "@internal")
 
diff --git a/gcc/config/rs6000/dfp.md b/gcc/config/rs6000/dfp.md
index 4fc7310..d2fd12b 100644
--- a/gcc/config/rs6000/dfp.md
+++ b/gcc/config/rs6000/dfp.md
@@ -1,6 +1,5 @@
 ;; Decimal Floating Point (DFP) patterns.
-;; Copyright (C) 2007, 2008, 2010, 2011
-;; Free Software Foundation, Inc.
+;; Copyright (C) 2007-2012 Free Software Foundation, Inc.
 ;; Contributed by Ben Elliston (bje@au.ibm.com) and Peter Bergner
 ;; (bergner@vnet.ibm.com).
 
@@ -62,8 +61,8 @@ (define_split
 }")
 
 (define_insn "movsd_hardfloat"
-  [(set (match_operand:SD 0 "nonimmediate_operand" "=r,r,m,f,*c*l,*q,!r,*h,!r,!r")
-	(match_operand:SD 1 "input_operand"        "r,m,r,f,r,r,h,0,G,Fn"))]
+  [(set (match_operand:SD 0 "nonimmediate_operand" "=r,r,m,f,*c*l,!r,*h,!r,!r")
+	(match_operand:SD 1 "input_operand"        "r,m,r,f,r,h,0,G,Fn"))]
   "(gpc_reg_operand (operands[0], SDmode)
    || gpc_reg_operand (operands[1], SDmode))
    && (TARGET_HARD_FLOAT && TARGET_FPRS)"
@@ -73,24 +72,22 @@ (define_insn "movsd_hardfloat"
    {st%U0%X0|stw%U0%X0} %1,%0
    fmr %0,%1
    mt%0 %1
-   mt%0 %1
    mf%1 %0
    {cror 0,0,0|nop}
    #
    #"
-  [(set_attr "type" "*,load,store,fp,mtjmpr,*,mfjmpr,*,*,*")
-   (set_attr "length" "4,4,4,4,4,4,4,4,4,8")])
+  [(set_attr "type" "*,load,store,fp,mtjmpr,mfjmpr,*,*,*")
+   (set_attr "length" "4,4,4,4,4,4,4,4,8")])
 
 (define_insn "movsd_softfloat"
-  [(set (match_operand:SD 0 "nonimmediate_operand" "=r,cl,q,r,r,m,r,r,r,r,r,*h")
-	(match_operand:SD 1 "input_operand" "r,r,r,h,m,r,I,L,R,G,Fn,0"))]
+  [(set (match_operand:SD 0 "nonimmediate_operand" "=r,cl,r,r,m,r,r,r,r,r,*h")
+	(match_operand:SD 1 "input_operand" "r,r,h,m,r,I,L,R,G,Fn,0"))]
   "(gpc_reg_operand (operands[0], SDmode)
    || gpc_reg_operand (operands[1], SDmode))
    && (TARGET_SOFT_FLOAT || !TARGET_FPRS)"
   "@
    mr %0,%1
    mt%0 %1
-   mt%0 %1
    mf%1 %0
    {l%U1%X1|lwz%U1%X1} %0,%1
    {st%U0%X0|stw%U0%X0} %1,%0
@@ -100,8 +97,8 @@ (define_insn "movsd_softfloat"
    #
    #
    {cror 0,0,0|nop}"
-  [(set_attr "type" "*,mtjmpr,*,mfjmpr,load,store,*,*,*,*,*,*")
-   (set_attr "length" "4,4,4,4,4,4,4,4,4,4,8,4")])
+  [(set_attr "type" "*,mtjmpr,mfjmpr,load,store,*,*,*,*,*,*")
+   (set_attr "length" "4,4,4,4,4,4,4,4,4,8,4")])
 
 (define_insn "movsd_store"
   [(set (match_operand:DD 0 "nonimmediate_operand" "=m")
diff --git a/gcc/config/rs6000/predicates.md b/gcc/config/rs6000/predicates.md
index f29d091..a68be9b 100644
--- a/gcc/config/rs6000/predicates.md
+++ b/gcc/config/rs6000/predicates.md
@@ -1,6 +1,5 @@
 ;; Predicate definitions for POWER and PowerPC.
-;; Copyright (C) 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
-;; Free Software Foundation, Inc.
+;; Copyright (C) 2005-2012 Free Software Foundation, Inc.
 ;;
 ;; This file is part of GCC.
 ;;
@@ -128,7 +127,7 @@ (define_predicate "gpc_reg_operand"
 	(match_test "(GET_CODE (op) != REG
 		      || (REGNO (op) >= ARG_POINTER_REGNUM
 			  && !CA_REGNO_P (REGNO (op)))
-		      || REGNO (op) < MQ_REGNO)
+		      || REGNO (op) < 64)
 		     && !((TARGET_E500_DOUBLE || TARGET_SPE)
 			  && invalid_e500_subreg (op, mode))")))
 
diff --git a/gcc/config/rs6000/rs6000.c b/gcc/config/rs6000/rs6000.c
index 1ed9155..ef7d46f 100644
--- a/gcc/config/rs6000/rs6000.c
+++ b/gcc/config/rs6000/rs6000.c
@@ -1750,7 +1750,6 @@ rs6000_debug_reg_global (void)
   rs6000_debug_reg_print (LR_REGNO, LR_REGNO, "lr");
   rs6000_debug_reg_print (CTR_REGNO, CTR_REGNO, "ctr");
   rs6000_debug_reg_print (CR0_REGNO, CR7_REGNO, "cr");
-  rs6000_debug_reg_print (MQ_REGNO, MQ_REGNO, "mq");
   rs6000_debug_reg_print (CA_REGNO, CA_REGNO, "ca");
   rs6000_debug_reg_print (VRSAVE_REGNO, VRSAVE_REGNO, "vrsave");
   rs6000_debug_reg_print (VSCR_REGNO, VSCR_REGNO, "vscr");
@@ -1973,7 +1972,6 @@ rs6000_init_hard_regno_mode_ok (bool global_init_p)
   for (r = CR1_REGNO; r <= CR7_REGNO; ++r)
     rs6000_regno_regclass[r] = CR_REGS;
 
-  rs6000_regno_regclass[MQ_REGNO] = MQ_REGS;
   rs6000_regno_regclass[LR_REGNO] = LINK_REGS;
   rs6000_regno_regclass[CTR_REGNO] = CTR_REGS;
   rs6000_regno_regclass[CA_REGNO] = CA_REGS;
@@ -27167,8 +27165,6 @@ rs6000_dbx_register_number (unsigned int regno)
 {
   if (regno <= 63 || write_symbols != DWARF2_DEBUG)
     return regno;
-  if (regno == MQ_REGNO)
-    return 100;
   if (regno == LR_REGNO)
     return 108;
   if (regno == CTR_REGNO)
diff --git a/gcc/config/rs6000/rs6000.h b/gcc/config/rs6000/rs6000.h
index 612d202..ec62fc6 100644
--- a/gcc/config/rs6000/rs6000.h
+++ b/gcc/config/rs6000/rs6000.h
@@ -772,9 +772,9 @@ extern unsigned rs6000_pointer_size;
    even those that are not normally considered general registers.
 
    RS/6000 has 32 fixed-point registers, 32 floating-point registers,
-   an MQ register, a count register, a link register, and 8 condition
-   register fields, which we view here as separate registers.  AltiVec
-   adds 32 vector registers and a VRsave register.
+   a count register, a link register, and 8 condition register fields,
+   which we view here as separate registers.  AltiVec adds 32 vector
+   registers and a VRsave register.
 
    In addition, the difference between the frame and argument pointers is
    a function of the number of registers saved, so we need to have a
@@ -918,7 +918,6 @@ extern unsigned rs6000_pointer_size;
 	r0		(not saved; cannot be base reg)
 	r31 - r13	(saved; order given to save least number)
 	r12		(not saved; if used for DImode or DFmode would use r13)
-	mq		(not saved; best to use it if we can)
 	ctr		(not saved; when we have the choice ctr is better)
 	lr		(saved)
 	cr5, r1, r2, ap, ca (fixed)
@@ -960,7 +959,7 @@ extern unsigned rs6000_pointer_size;
    3, EARLY_R12 11, 0,						\
    31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19,		\
    18, 17, 16, 15, 14, 13, LATE_R12				\
-   64, 66, 65,							\
+   66, 65,							\
    73, 1, MAYBE_R2_FIXED 67, 76,				\
    /* AltiVec registers.  */					\
    77, 78,							\
@@ -1158,7 +1157,7 @@ extern unsigned rs6000_pointer_size;
    class that represents their union.  */
 
 /* The RS/6000 has three types of registers, fixed-point, floating-point, and
-   condition registers, plus three special registers, MQ, CTR, and the link
+   condition registers, plus three special registers, CTR, and the link
    register.  AltiVec adds a vector register class.  VSX registers overlap the
    FPR registers and the Altivec registers.
 
@@ -1181,7 +1180,6 @@ enum reg_class
   SPE_ACC_REGS,
   SPEFSCR_REGS,
   NON_SPECIAL_REGS,
-  MQ_REGS,
   LINK_REGS,
   CTR_REGS,
   LINK_OR_CTR_REGS,
@@ -1212,7 +1210,6 @@ enum reg_class
   "SPE_ACC_REGS",                                                       \
   "SPEFSCR_REGS",                                                       \
   "NON_SPECIAL_REGS",							\
-  "MQ_REGS",								\
   "LINK_REGS",								\
   "CTR_REGS",								\
   "LINK_OR_CTR_REGS",							\
@@ -1242,17 +1239,16 @@ enum reg_class
   { 0x00000000, 0x00000000, 0x00000000, 0x00008000 }, /* SPE_ACC_REGS */     \
   { 0x00000000, 0x00000000, 0x00000000, 0x00010000 }, /* SPEFSCR_REGS */     \
   { 0xffffffff, 0xffffffff, 0x00000008, 0x00020000 }, /* NON_SPECIAL_REGS */ \
-  { 0x00000000, 0x00000000, 0x00000001, 0x00000000 }, /* MQ_REGS */	     \
   { 0x00000000, 0x00000000, 0x00000002, 0x00000000 }, /* LINK_REGS */	     \
   { 0x00000000, 0x00000000, 0x00000004, 0x00000000 }, /* CTR_REGS */	     \
   { 0x00000000, 0x00000000, 0x00000006, 0x00000000 }, /* LINK_OR_CTR_REGS */ \
-  { 0x00000000, 0x00000000, 0x00000007, 0x00002000 }, /* SPECIAL_REGS */     \
-  { 0xffffffff, 0x00000000, 0x0000000f, 0x00022000 }, /* SPEC_OR_GEN_REGS */ \
+  { 0x00000000, 0x00000000, 0x00000006, 0x00002000 }, /* SPECIAL_REGS */     \
+  { 0xffffffff, 0x00000000, 0x0000000e, 0x00022000 }, /* SPEC_OR_GEN_REGS */ \
   { 0x00000000, 0x00000000, 0x00000010, 0x00000000 }, /* CR0_REGS */	     \
   { 0x00000000, 0x00000000, 0x00000ff0, 0x00000000 }, /* CR_REGS */	     \
-  { 0xffffffff, 0x00000000, 0x00000fff, 0x00020000 }, /* NON_FLOAT_REGS */   \
+  { 0xffffffff, 0x00000000, 0x00000ffe, 0x00020000 }, /* NON_FLOAT_REGS */   \
   { 0x00000000, 0x00000000, 0x00001000, 0x00000000 }, /* CA_REGS */	     \
-  { 0xffffffff, 0xffffffff, 0xffffffff, 0x0003ffff }  /* ALL_REGS */	     \
+  { 0xffffffff, 0xffffffff, 0xfffffffe, 0x0003ffff }  /* ALL_REGS */	     \
 }
 
 /* The same information, inverted:
@@ -2104,7 +2100,7 @@ extern char rs6000_reg_names[][8];	/* register names (0 vs. %r0).  */
   &rs6000_reg_names[62][0],	/* fr30 */				\
   &rs6000_reg_names[63][0],	/* fr31 */				\
 									\
-  &rs6000_reg_names[64][0],     /* mq   */				\
+  &rs6000_reg_names[64][0],     /* was mq  */				\
   &rs6000_reg_names[65][0],	/* lr   */				\
   &rs6000_reg_names[66][0],	/* ctr  */				\
   &rs6000_reg_names[67][0],	/* ap   */				\
@@ -2188,7 +2184,7 @@ extern char rs6000_reg_names[][8];	/* register names (0 vs. %r0).  */
   {"v28",  105},{"v29",  106},{"v30",  107},{"v31",  108},      \
   {"vrsave", 109}, {"vscr", 110},				\
   {"spe_acc", 111}, {"spefscr", 112},				\
-  /* no additional names for: mq, lr, ctr, ap */		\
+  /* no additional names for: lr, ctr, ap */			\
   {"cr0",  68}, {"cr1",  69}, {"cr2",  70}, {"cr3",  71},	\
   {"cr4",  72}, {"cr5",  73}, {"cr6",  74}, {"cr7",  75},	\
   {"cc",   68}, {"sp",    1}, {"toc",   2},			\
diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md
index 166ec60..6ade53c 100644
--- a/gcc/config/rs6000/rs6000.md
+++ b/gcc/config/rs6000/rs6000.md
@@ -29,7 +29,6 @@ (define_constants
    (TOC_REGNUM			2)
    (STATIC_CHAIN_REGNUM		11)
    (HARD_FRAME_POINTER_REGNUM	31)
-   (MQ_REGNO			64)
    (LR_REGNO			65)
    (CTR_REGNO			66)
    (ARG_POINTER_REGNUM		67)
@@ -8249,8 +8248,8 @@ (define_insn "movsi_low"
    (set_attr "length" "4")])
 
 (define_insn "*movsi_internal1"
-  [(set (match_operand:SI 0 "rs6000_nonimmediate_operand" "=r,r,r,m,r,r,r,r,*q,*c*l,*h,*h")
-	(match_operand:SI 1 "input_operand" "r,U,m,r,I,L,n,*h,r,r,r,0"))]
+  [(set (match_operand:SI 0 "rs6000_nonimmediate_operand" "=r,r,r,m,r,r,r,r,*c*l,*h,*h")
+	(match_operand:SI 1 "input_operand" "r,U,m,r,I,L,n,*h,r,r,0"))]
   "!TARGET_SINGLE_FPU &&
    (gpc_reg_operand (operands[0], SImode) || gpc_reg_operand (operands[1], SImode))"
   "@
@@ -8264,14 +8263,13 @@ (define_insn "*movsi_internal1"
    mf%1 %0
    mt%0 %1
    mt%0 %1
-   mt%0 %1
    {cror 0,0,0|nop}"
-  [(set_attr "type" "*,*,load,store,*,*,*,mfjmpr,*,mtjmpr,*,*")
-   (set_attr "length" "4,4,4,4,4,4,8,4,4,4,4,4")])
+  [(set_attr "type" "*,*,load,store,*,*,*,mfjmpr,mtjmpr,*,*")
+   (set_attr "length" "4,4,4,4,4,4,8,4,4,4,4")])
 
 (define_insn "*movsi_internal1_single"
-  [(set (match_operand:SI 0 "rs6000_nonimmediate_operand" "=r,r,r,m,r,r,r,r,*q,*c*l,*h,*h,m,*f")
-        (match_operand:SI 1 "input_operand" "r,U,m,r,I,L,n,*h,r,r,r,0,f,m"))]
+  [(set (match_operand:SI 0 "rs6000_nonimmediate_operand" "=r,r,r,m,r,r,r,r,*c*l,*h,*h,m,*f")
+        (match_operand:SI 1 "input_operand" "r,U,m,r,I,L,n,*h,r,r,0,f,m"))]
   "TARGET_SINGLE_FPU &&
    (gpc_reg_operand (operands[0], SImode) || gpc_reg_operand (operands[1], SImode))"
   "@
@@ -8285,12 +8283,11 @@ (define_insn "*movsi_internal1_single"
    mf%1 %0
    mt%0 %1
    mt%0 %1
-   mt%0 %1
    {cror 0,0,0|nop}
    stfs%U0%X0 %1, %0
    lfs%U1%X1 %0, %1"
-  [(set_attr "type" "*,*,load,store,*,*,*,mfjmpr,*,mtjmpr,*,*,*,*")
-   (set_attr "length" "4,4,4,4,4,4,8,4,4,4,4,4,4,4")])
+  [(set_attr "type" "*,*,load,store,*,*,*,mfjmpr,mtjmpr,*,*,*,*")
+   (set_attr "length" "4,4,4,4,4,4,8,4,4,4,4,4,4")])
 
 ;; Split a load of a large constant into the appropriate two-insn
 ;; sequence.
@@ -8340,8 +8337,8 @@ (define_split
   "")
 
 (define_insn "*movhi_internal"
-  [(set (match_operand:HI 0 "nonimmediate_operand" "=r,r,m,r,r,*q,*c*l,*h")
-	(match_operand:HI 1 "input_operand" "r,m,r,i,*h,r,r,0"))]
+  [(set (match_operand:HI 0 "nonimmediate_operand" "=r,r,m,r,r,*c*l,*h")
+	(match_operand:HI 1 "input_operand" "r,m,r,i,*h,r,0"))]
   "gpc_reg_operand (operands[0], HImode)
    || gpc_reg_operand (operands[1], HImode)"
   "@
@@ -8351,9 +8348,8 @@ (define_insn "*movhi_internal"
    {lil|li} %0,%w1
    mf%1 %0
    mt%0 %1
-   mt%0 %1
    {cror 0,0,0|nop}"
-  [(set_attr "type" "*,load,store,*,mfjmpr,*,mtjmpr,*")])
+  [(set_attr "type" "*,load,store,*,mfjmpr,mtjmpr,*")])
 
 (define_expand "mov<mode>"
   [(set (match_operand:INT 0 "general_operand" "")
@@ -8362,8 +8358,8 @@ (define_expand "mov<mode>"
   "{ rs6000_emit_move (operands[0], operands[1], <MODE>mode); DONE; }")
 
 (define_insn "*movqi_internal"
-  [(set (match_operand:QI 0 "nonimmediate_operand" "=r,r,m,r,r,*q,*c*l,*h")
-	(match_operand:QI 1 "input_operand" "r,m,r,i,*h,r,r,0"))]
+  [(set (match_operand:QI 0 "nonimmediate_operand" "=r,r,m,r,r,*c*l,*h")
+	(match_operand:QI 1 "input_operand" "r,m,r,i,*h,r,0"))]
   "gpc_reg_operand (operands[0], QImode)
    || gpc_reg_operand (operands[1], QImode)"
   "@
@@ -8373,9 +8369,8 @@ (define_insn "*movqi_internal"
    {lil|li} %0,%1
    mf%1 %0
    mt%0 %1
-   mt%0 %1
    {cror 0,0,0|nop}"
-  [(set_attr "type" "*,load,store,*,mfjmpr,*,mtjmpr,*")])
+  [(set_attr "type" "*,load,store,*,mfjmpr,mtjmpr,*")])
 
 ;; Here is how to move condition codes around.  When we store CC data in
 ;; an integer register or memory, we store just the high-order 4 bits.
@@ -8387,8 +8382,8 @@ (define_expand "movcc"
   "")
 
 (define_insn "*movcc_internal1"
-  [(set (match_operand:CC 0 "nonimmediate_operand" "=y,x,?y,y,r,r,r,r,r,q,cl,r,m")
-	(match_operand:CC 1 "general_operand" "y,r,r,O,x,y,r,I,h,r,r,m,r"))]
+  [(set (match_operand:CC 0 "nonimmediate_operand" "=y,x,?y,y,r,r,r,r,r,cl,r,m")
+	(match_operand:CC 1 "general_operand" "y,r,r,O,x,y,r,I,h,r,m,r"))]
   "register_operand (operands[0], CCmode)
    || register_operand (operands[1], CCmode)"
   "@
@@ -8402,7 +8397,6 @@ (define_insn "*movcc_internal1"
    {lil|li} %0,%1
    mf%1 %0
    mt%0 %1
-   mt%0 %1
    {l%U1%X1|lwz%U1%X1} %0,%1
    {st%U0%U1|stw%U0%U1} %1,%0"
   [(set (attr "type")
@@ -8410,21 +8404,21 @@ (define_insn "*movcc_internal1"
 		(const_string "cr_logical")
 	    (eq_attr "alternative" "1,2")
 		(const_string "mtcr")
-	    (eq_attr "alternative" "6,7,9")
+	    (eq_attr "alternative" "6,7")
 		(const_string "integer")
 	    (eq_attr "alternative" "8")
 		(const_string "mfjmpr")
-	    (eq_attr "alternative" "10")
+	    (eq_attr "alternative" "9")
 		(const_string "mtjmpr")
-	    (eq_attr "alternative" "11")
+	    (eq_attr "alternative" "10")
 		(const_string "load")
-	    (eq_attr "alternative" "12")
+	    (eq_attr "alternative" "11")
 		(const_string "store")
 	    (match_test "TARGET_MFCRF")
 		(const_string "mfcrf")
 	   ]
 	(const_string "mfcr")))
-   (set_attr "length" "4,4,12,4,4,8,4,4,4,4,4,4,4")])
+   (set_attr "length" "4,4,12,4,4,8,4,4,4,4,4,4")])
 
 ;; For floating-point, we normally deal with the floating-point registers
 ;; unless -msoft-float is used.  The sole exception is that parameter passing
@@ -8463,8 +8457,8 @@ (define_split
 }")
 
 (define_insn "*movsf_hardfloat"
-  [(set (match_operand:SF 0 "nonimmediate_operand" "=!r,!r,m,f,f,m,*c*l,*q,!r,*h,!r,!r")
-	(match_operand:SF 1 "input_operand" "r,m,r,f,m,f,r,r,h,0,G,Fn"))]
+  [(set (match_operand:SF 0 "nonimmediate_operand" "=!r,!r,m,f,f,m,*c*l,!r,*h,!r,!r")
+	(match_operand:SF 1 "input_operand" "r,m,r,f,m,f,r,h,0,G,Fn"))]
   "(gpc_reg_operand (operands[0], SFmode)
    || gpc_reg_operand (operands[1], SFmode))
    && (TARGET_HARD_FLOAT && TARGET_FPRS && TARGET_SINGLE_FLOAT)"
@@ -8476,24 +8470,22 @@ (define_insn "*movsf_hardfloat"
    lfs%U1%X1 %0,%1
    stfs%U0%X0 %1,%0
    mt%0 %1
-   mt%0 %1
    mf%1 %0
    {cror 0,0,0|nop}
    #
    #"
-  [(set_attr "type" "*,load,store,fp,fpload,fpstore,mtjmpr,*,mfjmpr,*,*,*")
-   (set_attr "length" "4,4,4,4,4,4,4,4,4,4,4,8")])
+  [(set_attr "type" "*,load,store,fp,fpload,fpstore,mtjmpr,mfjmpr,*,*,*")
+   (set_attr "length" "4,4,4,4,4,4,4,4,4,4,8")])
 
 (define_insn "*movsf_softfloat"
-  [(set (match_operand:SF 0 "nonimmediate_operand" "=r,cl,q,r,r,m,r,r,r,r,*h")
-	(match_operand:SF 1 "input_operand" "r,r,r,h,m,r,I,L,G,Fn,0"))]
+  [(set (match_operand:SF 0 "nonimmediate_operand" "=r,cl,r,r,m,r,r,r,r,*h")
+	(match_operand:SF 1 "input_operand" "r,r,h,m,r,I,L,G,Fn,0"))]
   "(gpc_reg_operand (operands[0], SFmode)
    || gpc_reg_operand (operands[1], SFmode))
    && (TARGET_SOFT_FLOAT || !TARGET_FPRS)"
   "@
    mr %0,%1
    mt%0 %1
-   mt%0 %1
    mf%1 %0
    {l%U1%X1|lwz%U1%X1} %0,%1
    {st%U0%X0|stw%U0%X0} %1,%0
@@ -8502,8 +8494,8 @@ (define_insn "*movsf_softfloat"
    #
    #
    {cror 0,0,0|nop}"
-  [(set_attr "type" "*,mtjmpr,*,mfjmpr,load,store,*,*,*,*,*")
-   (set_attr "length" "4,4,4,4,4,4,4,4,4,8,4")])
+  [(set_attr "type" "*,mtjmpr,mfjmpr,load,store,*,*,*,*,*")
+   (set_attr "length" "4,4,4,4,4,4,4,4,8,4")])
 
 
 (define_expand "movdf"
@@ -13788,7 +13780,7 @@ (define_insn "*ctr<mode>_internal1"
 			  (const_int 1))
 		      (label_ref (match_operand 0 "" ""))
 		      (pc)))
-   (set (match_operand:P 2 "nonimmediate_operand" "=1,*r,m,*q*c*l")
+   (set (match_operand:P 2 "nonimmediate_operand" "=1,*r,m,*c*l")
 	(plus:P (match_dup 1)
 		 (const_int -1)))
    (clobber (match_scratch:CC 3 "=X,&x,&x,&x"))
@@ -13812,7 +13804,7 @@ (define_insn "*ctr<mode>_internal2"
 			  (const_int 1))
 		      (pc)
 		      (label_ref (match_operand 0 "" ""))))
-   (set (match_operand:P 2 "nonimmediate_operand" "=1,*r,m,*q*c*l")
+   (set (match_operand:P 2 "nonimmediate_operand" "=1,*r,m,*c*l")
 	(plus:P (match_dup 1)
 		 (const_int -1)))
    (clobber (match_scratch:CC 3 "=X,&x,&x,&x"))
@@ -13838,7 +13830,7 @@ (define_insn "*ctr<mode>_internal5"
 			  (const_int 1))
 		      (label_ref (match_operand 0 "" ""))
 		      (pc)))
-   (set (match_operand:P 2 "nonimmediate_operand" "=1,*r,m,*q*c*l")
+   (set (match_operand:P 2 "nonimmediate_operand" "=1,*r,m,*c*l")
 	(plus:P (match_dup 1)
 		 (const_int -1)))
    (clobber (match_scratch:CC 3 "=X,&x,&x,&x"))
@@ -13862,7 +13854,7 @@ (define_insn "*ctr<mode>_internal6"
 			  (const_int 1))
 		      (pc)
 		      (label_ref (match_operand 0 "" ""))))
-   (set (match_operand:P 2 "nonimmediate_operand" "=1,*r,m,*q*c*l")
+   (set (match_operand:P 2 "nonimmediate_operand" "=1,*r,m,*c*l")
 	(plus:P (match_dup 1)
 		 (const_int -1)))
    (clobber (match_scratch:CC 3 "=X,&x,&x,&x"))
