@@ -198,6 +198,19 @@ static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
}
ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+ /* MDI-X => 2; MDI =>1; Invalid =>0 */
+ if (hw->phy.media_type == e1000_media_type_copper)
+ ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
+ ETH_TP_MDI;
+ else
+ ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+
+ if (hw->phy.mdix == AUTO_ALL_MODES)
+ ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
+ else
+ ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
+
return 0;
}
@@ -214,6 +227,22 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
return -EINVAL;
}
+ /*
+ * MDI setting is only allowed when autoneg enabled because
+ * some hardware doesn't allow MDI setting when speed or
+ * duplex is forced.
+ */
+ if (ecmd->eth_tp_mdix_ctrl) {
+ if (hw->phy.media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
+ (ecmd->autoneg != AUTONEG_ENABLE)) {
+ dev_err(&adapter->pdev->dev, "forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
+ return -EINVAL;
+ }
+ }
+
while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
msleep(1);
@@ -227,12 +256,25 @@ static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
hw->fc.requested_mode = e1000_fc_default;
} else {
u32 speed = ethtool_cmd_speed(ecmd);
+ /* calling this overrides forced MDI setting */
if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__IGB_RESETTING, &adapter->state);
return -EINVAL;
}
}
+ /* MDI-X => 2; MDI => 1; Auto => 3 */
+ if (ecmd->eth_tp_mdix_ctrl) {
+ /*
+ * fix up the value for auto (3 => 0) as zero is mapped
+ * internally to auto
+ */
+ if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
+ hw->phy.mdix = AUTO_ALL_MODES;
+ else
+ hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
+ }
+
/* reset the link */
if (netif_running(adapter->netdev)) {
igb_down(adapter);
@@ -6676,6 +6676,10 @@ int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
default:
goto err_inval;
}
+
+ /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
+ adapter->hw.phy.mdix = AUTO_ALL_MODES;
+
return 0;
err_inval:
This is the implementation for igb to allow forcing MDI state via ethtool, allowing users to work around some improperly behaving switches. forcing in this driver is for now only allowed when auto-neg is enabled. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Carolyn Wyborny <carolyn.wyborny@intel.com> --- drivers/net/ethernet/intel/igb/igb_ethtool.c | 42 ++++++++++++++++++++++++++ drivers/net/ethernet/intel/igb/igb_main.c | 4 ++ 2 files changed, 46 insertions(+), 0 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html