Patchwork [v2,1/3] mtd: nand: Include IMX6 in the list of supported SoCs

login
register
mail settings
Submitter Fabio Estevam
Date July 25, 2012, 11:18 a.m.
Message ID <1343215100-24005-1-git-send-email-festevam@gmail.com>
Download mbox | patch
Permalink /patch/173138/
State New
Headers show

Comments

Fabio Estevam - July 25, 2012, 11:18 a.m.
From: Fabio Estevam <fabio.estevam@freescale.com>

Include IMX6 in the list of supported SoCs.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v1:
- No changes
 drivers/mtd/nand/Kconfig |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Richard Zhao - July 27, 2012, 9:30 a.m.
On Wed, Jul 25, 2012 at 08:18:18AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Include IMX6 in the list of supported SoCs.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
> Changes since v1:
> - No changes
>  drivers/mtd/nand/Kconfig |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
> index f4e81a7..b40e172 100644
> --- a/drivers/mtd/nand/Kconfig
> +++ b/drivers/mtd/nand/Kconfig
> @@ -464,7 +464,7 @@ config MTD_NAND_GPMI_NAND
>          bool "GPMI NAND Flash Controller driver"
>          depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q)
We don't need to list all SoCs. Shall we just check MXC or MXS ?

Thanks
Richard
>          help
> -	 Enables NAND Flash support for IMX23 or IMX28.
> +	 Enables NAND Flash support for IMX23, IMX28 or IMX6.
>  	 The GPMI controller is very powerful, with the help of BCH
>  	 module, it can do the hardware ECC. The GPMI supports several
>  	 NAND flashs at the same time. The GPMI may conflicts with other
> -- 
> 1.7.1
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
Huang Shijie - July 27, 2012, 10:12 a.m.
于 2012年07月27日 17:30, Richard Zhao 写道:
> We don't need to list all SoCs. Shall we just check MXC or MXS ?
The gpmi nand controller only exits in mx23/mx23/mx50/mx6q. In 
mx53/mx35, we use the mxc-nand controller.
So it's better to list all the supported SoCs here.

Best Regards
Huang Shijie
Artem Bityutskiy - Aug. 17, 2012, 3:52 p.m.
On Wed, 2012-07-25 at 08:18 -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Include IMX6 in the list of supported SoCs.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> 

Pushed this one to l2-mtd.git, thanks!

Patch

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index f4e81a7..b40e172 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -464,7 +464,7 @@  config MTD_NAND_GPMI_NAND
         bool "GPMI NAND Flash Controller driver"
         depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28 || SOC_IMX6Q)
         help
-	 Enables NAND Flash support for IMX23 or IMX28.
+	 Enables NAND Flash support for IMX23, IMX28 or IMX6.
 	 The GPMI controller is very powerful, with the help of BCH
 	 module, it can do the hardware ECC. The GPMI supports several
 	 NAND flashs at the same time. The GPMI may conflicts with other