Patchwork [v2,3/3] lsi53c895a boot support

login
register
mail settings
Submitter Gerd Hoffmann
Date July 20, 2012, 8:59 a.m.
Message ID <1342774765-20640-4-git-send-email-kraxel@redhat.com>
Download mbox | patch
Permalink /patch/172183/
State New
Headers show

Comments

Gerd Hoffmann - July 20, 2012, 8:59 a.m.
This patch adds support for the lsi53c895a scsi host adapter,
allowing seabios to boot from scsi disks and cdroms connected
to the lsi scsi hba emulated by qemu.

This driver was written by looking at the expectations of qemu's
lsi emulation.  I have no idea idea how close this is to work on
real hardware, and I somehow doubt anyone cares given the age of
physical lsi scsi cards.  It depends on !COREBOOT for that reason.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 Makefile       |    2 +-
 src/Kconfig    |    6 ++
 src/block.c    |    3 +-
 src/blockcmd.c |    5 +-
 src/disk.h     |    1 +
 src/lsi-scsi.c |  212 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 src/lsi-scsi.h |    8 ++
 src/post.c     |    2 +
 8 files changed, 236 insertions(+), 3 deletions(-)
 create mode 100644 src/lsi-scsi.c
 create mode 100644 src/lsi-scsi.h

Patch

diff --git a/Makefile b/Makefile
index 8fa5c91..dfdec5c 100644
--- a/Makefile
+++ b/Makefile
@@ -13,7 +13,7 @@  SRCBOTH=misc.c stacks.c pmm.c output.c util.c block.c floppy.c ata.c mouse.c \
     pnpbios.c pirtable.c vgahooks.c ramdisk.c pcibios.c blockcmd.c \
     usb.c usb-uhci.c usb-ohci.c usb-ehci.c usb-hid.c usb-msc.c \
     virtio-ring.c virtio-pci.c virtio-blk.c virtio-scsi.c apm.c ahci.c \
-    usb-uas.c
+    usb-uas.c lsi-scsi.c
 SRC16=$(SRCBOTH) system.c disk.c font.c
 SRC32FLAT=$(SRCBOTH) post.c shadow.c memmap.c coreboot.c boot.c \
     acpi.c smm.c mptable.c smbios.c pciinit.c optionroms.c mtrr.c \
diff --git a/src/Kconfig b/src/Kconfig
index a798d9f..bc343ee 100644
--- a/src/Kconfig
+++ b/src/Kconfig
@@ -119,6 +119,12 @@  menu "Hardware support"
         default y
         help
             Support boot from virtio-scsi storage.
+    config LSI_SCSI
+        depends on DRIVES && !COREBOOT
+        bool "lsi53c895a scsi controllers"
+        default y
+        help
+            Support boot from qemu-emulated lsi53c895a scsi storage.
     config FLOPPY
         depends on DRIVES
         bool "Floppy controller"
diff --git a/src/block.c b/src/block.c
index 50d7bb4..2de9c5d 100644
--- a/src/block.c
+++ b/src/block.c
@@ -280,7 +280,7 @@  map_floppy_drive(struct drive_s *drive_g)
 static int
 process_scsi_op(struct disk_op_s *op)
 {
-    if (!CONFIG_VIRTIO_SCSI && !CONFIG_USB_MSC && !CONFIG_USB_UAS)
+    if (!CONFIG_VIRTIO_SCSI && !CONFIG_USB_MSC && !CONFIG_USB_UAS && !CONFIG_LSI_SCSI)
         return 0;
     switch (op->command) {
     case CMD_READ:
@@ -323,6 +323,7 @@  process_op(struct disk_op_s *op)
     case DTYPE_USB:
     case DTYPE_UAS:
     case DTYPE_VIRTIO_SCSI:
+    case DTYPE_LSI_SCSI:
         return process_scsi_op(op);
     default:
         op->count = 0;
diff --git a/src/blockcmd.c b/src/blockcmd.c
index 2998a7c..0d0acfd 100644
--- a/src/blockcmd.c
+++ b/src/blockcmd.c
@@ -14,6 +14,7 @@ 
 #include "usb-msc.h" // usb_cmd_data
 #include "usb-uas.h" // usb_cmd_data
 #include "virtio-scsi.h" // virtio_scsi_cmd_data
+#include "lsi-scsi.h" // lsi_scsi_cmd_data
 #include "boot.h" // boot_add_hd
 
 // Route command to low-level handler.
@@ -32,6 +33,8 @@  cdb_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize)
         return ahci_cmd_data(op, cdbcmd, blocksize);
     case DTYPE_VIRTIO_SCSI:
         return virtio_scsi_cmd_data(op, cdbcmd, blocksize);
+    case DTYPE_LSI_SCSI:
+        return lsi_scsi_cmd_data(op, cdbcmd, blocksize);
     default:
         op->count = 0;
         return DISK_RET_EPARAM;
@@ -93,7 +96,7 @@  scsi_is_ready(struct disk_op_s *op)
 int
 scsi_init_drive(struct drive_s *drive, const char *s, int prio)
 {
-    if (!CONFIG_USB_UAS && !CONFIG_USB_MSC && !CONFIG_VIRTIO_SCSI)
+    if (!CONFIG_USB_UAS && !CONFIG_USB_MSC && !CONFIG_VIRTIO_SCSI && !CONFIG_LSI_SCSI)
         return 0;
 
     struct disk_op_s dop;
diff --git a/src/disk.h b/src/disk.h
index 787b5b4..6810cd7 100644
--- a/src/disk.h
+++ b/src/disk.h
@@ -232,6 +232,7 @@  struct drive_s {
 #define DTYPE_VIRTIO_BLK   0x08
 #define DTYPE_USB          0x09
 #define DTYPE_UAS          0x0a
+#define DTYPE_LSI_SCSI     0x0b
 
 #define MAXDESCSIZE 80
 
diff --git a/src/lsi-scsi.c b/src/lsi-scsi.c
new file mode 100644
index 0000000..949d3f4
--- /dev/null
+++ b/src/lsi-scsi.c
@@ -0,0 +1,212 @@ 
+// (qemu-emulated) lsi53c895a boot support.
+//
+// Copyright (C) 2012 Red Hat Inc.
+//
+// Authors:
+//  Gerd Hoffmann <kraxel@redhat.com>
+//
+// based on virtio-scsi.c which is written by:
+//  Paolo Bonzini <pbonzini@redhat.com>
+//
+// This file may be distributed under the terms of the GNU LGPLv3 license.
+
+#include "util.h" // dprintf
+#include "pci.h" // foreachpci
+#include "config.h" // CONFIG_*
+#include "biosvar.h" // GET_GLOBAL
+#include "pci_ids.h" // PCI_DEVICE_ID_VIRTIO_BLK
+#include "pci_regs.h" // PCI_VENDOR_ID
+#include "boot.h" // bootprio_find_scsi_device
+#include "blockcmd.h" // scsi_init_drive
+#include "disk.h"
+
+#define LSI_REG_DSTAT     0x0c
+#define LSI_REG_ISTAT0    0x14
+#define LSI_REG_DSP0      0x2c
+#define LSI_REG_DSP1      0x2d
+#define LSI_REG_DSP2      0x2e
+#define LSI_REG_DSP3      0x2f
+#define LSI_REG_SIST0     0x42
+#define LSI_REG_SIST1     0x43
+
+#define LSI_ISTAT0_DIP    0x01
+#define LSI_ISTAT0_SIP    0x02
+#define LSI_ISTAT0_INTF   0x04
+#define LSI_ISTAT0_CON    0x08
+#define LSI_ISTAT0_SEM    0x10
+#define LSI_ISTAT0_SIGP   0x20
+#define LSI_ISTAT0_SRST   0x40
+#define LSI_ISTAT0_ABRT   0x80
+
+struct lsi_lun_s {
+    struct drive_s drive;
+    struct pci_device *pci;
+    u32 iobase;
+    u8 target;
+    u8 lun;
+};
+
+static int
+lsi_scsi_cmd(struct lsi_lun_s *llun, struct disk_op_s *op,
+             void *cdbcmd, u16 target, u16 lun, u16 blocksize)
+{
+    u32 iobase = GET_GLOBAL(llun->iobase);
+    u32 dma = ((cdb_is_read(cdbcmd, blocksize) ? 0x01000000 : 0x00000000) |
+               (op->count * blocksize));
+    u8 msgout[] = {
+        0x80 | lun,                 // select lun
+        0x08,
+    };
+    u8 status = 0xff;
+    u8 msgin_tmp[2];
+    u8 msgin = 0xff;
+
+    u32 script[] = {
+        /* select target, send scsi command */
+        0x40000000 | target << 16,  // select target
+        0x00000000,
+        0x06000001,                 // msgout
+        (u32)MAKE_FLATPTR(GET_SEG(SS), &msgout),
+        0x02000010,                 // scsi command
+        (u32)MAKE_FLATPTR(GET_SEG(SS), cdbcmd),
+
+        /* handle disconnect */
+        0x87820000,                 // phase == msgin ?
+        0x00000018,
+        0x07000002,                 // msgin
+        (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin_tmp),
+        0x50000000,                 // re-select
+        0x00000000,
+        0x07000002,                 // msgin
+        (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin_tmp),
+
+        /* dma data, get status, raise irq */
+        dma,                        // dma data
+        (u32)op->buf_fl,
+        0x03000001,                 // status
+        (u32)MAKE_FLATPTR(GET_SEG(SS), &status),
+        0x07000001,                 // msgin
+        (u32)MAKE_FLATPTR(GET_SEG(SS), &msgin),
+        0x98080000,                 // dma irq
+        0x00000000,
+    };
+    u32 dsp = (u32)MAKE_FLATPTR(GET_SEG(SS), &script);
+
+    outb(dsp         & 0xff, iobase + LSI_REG_DSP0);
+    outb((dsp >>  8) & 0xff, iobase + LSI_REG_DSP1);
+    outb((dsp >> 16) & 0xff, iobase + LSI_REG_DSP2);
+    outb((dsp >> 24) & 0xff, iobase + LSI_REG_DSP3);
+
+    for (;;) {
+        u8 dstat = inb(iobase + LSI_REG_DSTAT);
+        u8 sist0 = inb(iobase + LSI_REG_SIST0);
+        u8 sist1 = inb(iobase + LSI_REG_SIST1);
+        if (sist0 || sist1) {
+            goto fail;
+        }
+        if (dstat & 0x04) {
+            break;
+        }
+        usleep(5);
+    }
+
+    if (msgin == 0 && status == 0) {
+        return DISK_RET_SUCCESS;
+    }
+
+fail:
+    // sledge hammer to get back into a known-good state: hba reset
+    outb(LSI_ISTAT0_SRST, iobase + LSI_REG_ISTAT0);
+    return DISK_RET_EBADTRACK;
+}
+
+int
+lsi_scsi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize)
+{
+    if (!CONFIG_LSI_SCSI)
+        return DISK_RET_EBADTRACK;
+
+    struct lsi_lun_s *llun =
+        container_of(op->drive_g, struct lsi_lun_s, drive);
+
+    return lsi_scsi_cmd(llun, op, cdbcmd,
+                        GET_GLOBAL(llun->target), GET_GLOBAL(llun->lun),
+                        blocksize);
+}
+
+static int
+lsi_scsi_add_lun(struct pci_device *pci, u32 iobase, u8 target, u8 lun)
+{
+    struct lsi_lun_s *llun = malloc_fseg(sizeof(*llun));
+    if (!llun) {
+        warn_noalloc();
+        return -1;
+    }
+    memset(llun, 0, sizeof(*llun));
+    llun->drive.type = DTYPE_LSI_SCSI;
+    llun->drive.cntl_id = pci->bdf;
+    llun->pci = pci;
+    llun->target = target;
+    llun->lun = lun;
+    llun->iobase = iobase;
+
+    char *name = znprintf(16, "lsi %02x:%02x.%x %d:%d",
+                          pci_bdf_to_bus(pci->bdf), pci_bdf_to_dev(pci->bdf),
+                          pci_bdf_to_fn(pci->bdf), target, lun);
+    int prio = bootprio_find_scsi_device(pci, target, lun);
+    int ret = scsi_init_drive(&llun->drive, name, prio);
+    free(name);
+    if (ret)
+        goto fail;
+    return 0;
+
+fail:
+    free(llun);
+    return -1;
+}
+
+static void
+lsi_scsi_scan_target(struct pci_device *pci, u32 iobase, u8 target)
+{
+    /* TODO: send REPORT LUNS.  For now, only LUN 0 is recognized.  */
+    lsi_scsi_add_lun(pci, iobase, target, 0);
+}
+
+static void
+init_lsi_scsi(struct pci_device *pci)
+{
+    u16 bdf = pci->bdf;
+    u32 iobase = pci_config_readl(pci->bdf, PCI_BASE_ADDRESS_0)
+        & PCI_BASE_ADDRESS_IO_MASK;
+
+    dprintf(1, "found lsi53c895a at %02x:%02x.%x, io @ %x\n",
+            pci_bdf_to_bus(bdf), pci_bdf_to_dev(bdf),
+            pci_bdf_to_fn(bdf), iobase);
+
+    // reset
+    outb(LSI_ISTAT0_SRST, iobase + LSI_REG_ISTAT0);
+
+    int i;
+    for (i = 0; i < 7; i++)
+        lsi_scsi_scan_target(pci, iobase, i);
+
+    return;
+}
+
+void
+lsi_scsi_setup(void)
+{
+    ASSERT32FLAT();
+    if (!CONFIG_LSI_SCSI)
+        return;
+
+    dprintf(3, "init lsi53c895a\n");
+
+    struct pci_device *pci;
+    foreachpci(pci) {
+        if (pci->vendor != PCI_VENDOR_ID_LSI_LOGIC
+            || pci->device != PCI_DEVICE_ID_LSI_53C895A)
+            continue;
+        init_lsi_scsi(pci);
+    }
+}
diff --git a/src/lsi-scsi.h b/src/lsi-scsi.h
new file mode 100644
index 0000000..9c5a9b2
--- /dev/null
+++ b/src/lsi-scsi.h
@@ -0,0 +1,8 @@ 
+#ifndef __LSI_SCSI_H
+#define __LSI_SCSI_H
+
+struct disk_op_s;
+int lsi_scsi_cmd_data(struct disk_op_s *op, void *cdbcmd, u16 blocksize);
+void lsi_scsi_setup(void);
+
+#endif /* __LSI_SCSI_H */
diff --git a/src/post.c b/src/post.c
index 3101505..0f31b4c 100644
--- a/src/post.c
+++ b/src/post.c
@@ -27,6 +27,7 @@ 
 #include "ps2port.h" // ps2port_setup
 #include "virtio-blk.h" // virtio_blk_setup
 #include "virtio-scsi.h" // virtio_scsi_setup
+#include "lsi-scsi.h" // lsi_scsi_setup
 
 
 /****************************************************************
@@ -194,6 +195,7 @@  init_hw(void)
     ramdisk_setup();
     virtio_blk_setup();
     virtio_scsi_setup();
+    lsi_scsi_setup();
 }
 
 // Begin the boot process by invoking an int0x19 in 16bit mode.