Patchwork [v2,7/7] ARM: mxs: add dtb-y target into Makefile.boot

login
register
mail settings
Submitter Shawn Guo
Date July 10, 2012, 5:36 a.m.
Message ID <1341898587-8462-8-git-send-email-shawn.guo@linaro.org>
Download mbox | patch
Permalink /patch/170044/
State New
Headers show

Comments

Shawn Guo - July 10, 2012, 5:36 a.m.
Add dtb-y target into Makefile.boot, so that "make ARCH=arm dtbs" can
build out all the dtbs listed there.  It's very useful for build-testing
all the <board>.dts when imx28.dtsi changes.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-mxs/Makefile.boot |    9 +++++++++
 1 files changed, 9 insertions(+), 0 deletions(-)

Patch

diff --git a/arch/arm/mach-mxs/Makefile.boot b/arch/arm/mach-mxs/Makefile.boot
index 07b11fe..58733cc 100644
--- a/arch/arm/mach-mxs/Makefile.boot
+++ b/arch/arm/mach-mxs/Makefile.boot
@@ -1 +1,10 @@ 
 zreladdr-y += 0x40008000
+
+dtb-y += apx4devkit.dtb \
+	 cfa10036.dtb \
+	 imx23-evk.dtb \
+	 imx23-olinuxino.dtb \
+	 imx28-evk.dtb \
+	 m28evk.dtb \
+	 stmp378x_devb.dtb \
+	 tx28.dtb \