Patchwork [U-Boot,v3] arm : Atmel : add at91sam9x5ek board support

login
register
mail settings
Submitter Bo Shen
Date July 3, 2012, 2:06 a.m.
Message ID <1341281199-2087-1-git-send-email-voice.shen@atmel.com>
Download mbox | patch
Permalink /patch/168668/
State Superseded
Delegated to: Andreas Bießmann
Headers show

Comments

Bo Shen - July 3, 2012, 2:06 a.m.
Add at91sam9x5ek board support, this board support the following SoCs
  AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, AT91SAM9X25, AT91SAM9X35

Using at91sam9x5ek_nandflash to configure for the board
Now only supports NAND with software ECC boot up

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
This patch is based on git://git.denx.de/u-boot-atmel.git

Changed since v1 and v2
  Modify the code according to Andreas's suggestion
---
 MAINTAINERS                                        |    3 +
 arch/arm/cpu/arm926ejs/at91/Makefile               |    1 +
 arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c   |  232 +++++++++++++++
 arch/arm/cpu/arm926ejs/at91/clock.c                |   12 +-
 arch/arm/include/asm/arch-at91/at91sam9_matrix.h   |    2 +
 arch/arm/include/asm/arch-at91/at91sam9x5.h        |  170 +++++++++++
 arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h |   91 ++++++
 arch/arm/include/asm/arch-at91/hardware.h          |    2 +
 board/atmel/at91sam9x5ek/Makefile                  |   52 ++++
 board/atmel/at91sam9x5ek/at91sam9x5ek.c            |  299 ++++++++++++++++++++
 board/atmel/at91sam9x5ek/config.mk                 |    1 +
 boards.cfg                                         |    1 +
 drivers/net/macb.c                                 |    4 +-
 include/configs/at91sam9x5ek.h                     |  184 ++++++++++++
 14 files changed, 1050 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
 create mode 100644 arch/arm/include/asm/arch-at91/at91sam9x5.h
 create mode 100644 arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
 create mode 100644 board/atmel/at91sam9x5ek/Makefile
 create mode 100644 board/atmel/at91sam9x5ek/at91sam9x5ek.c
 create mode 100644 board/atmel/at91sam9x5ek/config.mk
 create mode 100644 include/configs/at91sam9x5ek.h
Andreas Bießmann - July 3, 2012, 11:32 p.m.
Dear Bo Shen,

sorry, a few objections left.
Wolfgang requested for last pull for -rc1 these days and I don't know if
Albert is willing to pull the 6 other at91 related patches in for -rc1
or even 2012.07. So I think we don't need to hurry here. This board will
make its way to mainline at least for 2012.10.

On 03.07.12 04:06, Bo Shen wrote:
> Add at91sam9x5ek board support, this board support the following SoCs
>   AT91SAM9G15, AT91SAM9G25, AT91SAM9G35, AT91SAM9X25, AT91SAM9X35
> 
> Using at91sam9x5ek_nandflash to configure for the board
> Now only supports NAND with software ECC boot up
> 
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
> ---
> This patch is based on git://git.denx.de/u-boot-atmel.git
> 
> Changed since v1 and v2
>   Modify the code according to Andreas's suggestion
> ---
>  MAINTAINERS                                        |    3 +
>  arch/arm/cpu/arm926ejs/at91/Makefile               |    1 +
>  arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c   |  232 +++++++++++++++
>  arch/arm/cpu/arm926ejs/at91/clock.c                |   12 +-
>  arch/arm/include/asm/arch-at91/at91sam9_matrix.h   |    2 +
>  arch/arm/include/asm/arch-at91/at91sam9x5.h        |  170 +++++++++++
>  arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h |   91 ++++++
>  arch/arm/include/asm/arch-at91/hardware.h          |    2 +
>  board/atmel/at91sam9x5ek/Makefile                  |   52 ++++
>  board/atmel/at91sam9x5ek/at91sam9x5ek.c            |  299 ++++++++++++++++++++
>  board/atmel/at91sam9x5ek/config.mk                 |    1 +
>  boards.cfg                                         |    1 +
>  drivers/net/macb.c                                 |    4 +-
>  include/configs/at91sam9x5ek.h                     |  184 ++++++++++++
>  14 files changed, 1050 insertions(+), 4 deletions(-)
>  create mode 100644 arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
>  create mode 100644 arch/arm/include/asm/arch-at91/at91sam9x5.h
>  create mode 100644 arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
>  create mode 100644 board/atmel/at91sam9x5ek/Makefile
>  create mode 100644 board/atmel/at91sam9x5ek/at91sam9x5ek.c
>  create mode 100644 board/atmel/at91sam9x5ek/config.mk
>  create mode 100644 include/configs/at91sam9x5ek.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 6438e1c..a2fccbf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -660,6 +660,9 @@ Sedji Gaouaou<sedji.gaouaou@atmel.com>
>  	at91sam9g10ek		ARM926EJS (AT91SAM9G10 SoC)
>  	at91sam9m10g45ek	ARM926EJS (AT91SAM9G45 SoC)
>  
> +Bo Shen <voice.shen@atmel.com>
> +	at91sam9x5ek		ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC)
> +
>  Simon Guinot <simon.guinot@sequanux.org>
>  
>  	inetspace_v2	ARM926EJS (Kirkwood SoC)
> diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile
> index f333753..346e58f 100644
> --- a/arch/arm/cpu/arm926ejs/at91/Makefile
> +++ b/arch/arm/cpu/arm926ejs/at91/Makefile
> @@ -35,6 +35,7 @@ COBJS-$(CONFIG_AT91SAM9263)	+= at91sam9263_devices.o
>  COBJS-$(CONFIG_AT91SAM9RL)	+= at91sam9rl_devices.o
>  COBJS-$(CONFIG_AT91SAM9M10G45)	+= at91sam9m10g45_devices.o
>  COBJS-$(CONFIG_AT91SAM9G45)	+= at91sam9m10g45_devices.o
> +COBJS-$(CONFIG_AT91SAM9X5)	+= at91sam9x5_devices.o
>  COBJS-$(CONFIG_AT91_EFLASH)	+= eflash.o
>  COBJS-$(CONFIG_AT91_LED)	+= led.o
>  COBJS-y += clock.o
> diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
> new file mode 100644
> index 0000000..7558ca2
> --- /dev/null
> +++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
> @@ -0,0 +1,232 @@
> +/*
> + * Copyright (C) 2012 Atmel Corporation
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/arch/at91_common.h>
> +#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/io.h>
> +
> +unsigned int get_chip_id(void)
> +{
> +	/* The 0x40 is the offset of cidr in DBGU */
> +	return readl(ATMEL_BASE_DBGU + 0x40) & ~ARCH_ID_VERSION_MASK;
> +}
> +
> +unsigned int get_extension_chip_id(void)
> +{
> +	/* The 0x44 is the offset of exid in DBGU */
> +	return readl(ATMEL_BASE_DBGU + 0x44);
> +}
> +
> +unsigned int has_emac1()
> +{
> +	return cpu_is_at91sam9x25();
> +}
> +
> +unsigned int has_emac0()
> +{
> +	return !(cpu_is_at91sam9g15());
> +}
> +
> +unsigned int has_lcdc()
> +{
> +	return cpu_is_at91sam9g15() || cpu_is_at91sam9g35()
> +		|| cpu_is_at91sam9x35();
> +}
> +
> +char *get_cpu_name()
> +{
> +	unsigned int extension_id = get_extension_chip_id();
> +
> +	if (cpu_is_at91sam9x5()) {
> +		switch (extension_id) {
> +		case ARCH_EXID_AT91SAM9G15:
> +			return CONFIG_SYS_AT91_G15_CPU_NAME;
> +		case ARCH_EXID_AT91SAM9G25:
> +			return CONFIG_SYS_AT91_G25_CPU_NAME;
> +		case ARCH_EXID_AT91SAM9G35:
> +			return CONFIG_SYS_AT91_G35_CPU_NAME;
> +		case ARCH_EXID_AT91SAM9X25:
> +			return CONFIG_SYS_AT91_X25_CPU_NAME;
> +		case ARCH_EXID_AT91SAM9X35:
> +			return CONFIG_SYS_AT91_X35_CPU_NAME;
> +		default:
> +			return CONFIG_SYS_AT91_UNKNOWN_CPU;
> +		}
> +	} else {
> +		return CONFIG_SYS_AT91_UNKNOWN_CPU;
> +	}
> +}
> +
> +void at91_seriald_hw_init(void)
> +{
> +	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> +
> +	at91_set_a_periph(AT91_PIO_PORTA, 9, 0);	/* DRXD */
> +	at91_set_a_periph(AT91_PIO_PORTA, 10, 1);	/* DTXD */
> +
> +	writel(1 << ATMEL_ID_SYS, &pmc->pcer);
> +}
> +
> +void at91_serial0_hw_init(void)
> +{
> +	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> +
> +	at91_set_a_periph(AT91_PIO_PORTA, 0, 1);	/* TXD */
> +	at91_set_a_periph(AT91_PIO_PORTA, 1, 0);	/* RXD */
> +
> +	writel(1 << ATMEL_ID_USART0, &pmc->pcer);
> +}
> +
> +void at91_serial1_hw_init(void)
> +{
> +	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> +
> +	at91_set_a_periph(AT91_PIO_PORTA, 5, 1);	/* TXD */
> +	at91_set_a_periph(AT91_PIO_PORTA, 6, 0);	/* RXD */
> +
> +	writel(1 << ATMEL_ID_USART1, &pmc->pcer);
> +}
> +
> +void at91_serial2_hw_init(void)
> +{
> +	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> +
> +	at91_set_a_periph(AT91_PIO_PORTA, 7, 1);	/* TXD */
> +	at91_set_a_periph(AT91_PIO_PORTA, 8, 0);	/* RXD */
> +
> +	writel(1 << ATMEL_ID_USART2, &pmc->pcer);
> +}
> +
> +#ifdef CONFIG_ATMEL_SPI
> +void at91_spi0_hw_init(unsigned long cs_mask)
> +{
> +	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_PMC_BASE;
> +
> +	at91_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* SPI0_MISO */
> +	at91_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* SPI0_MOSI */
> +	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* SPI0_SPCK */
> +
> +	/* Enable clock */
> +	writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
> +
> +	if (cs_mask & (1 << 0))
> +		at91_set_a_periph(AT91_PIO_PORTA, 14, 0);
> +	if (cs_mask & (1 << 1))
> +		at91_set_b_periph(AT91_PIO_PORTA, 7, 0);
> +	if (cs_mask & (1 << 2))
> +		at91_set_b_periph(AT91_PIO_PORTA, 1, 0);
> +	if (cs_mask & (1 << 3))
> +		at91_set_b_periph(AT91_PIO_PORTB, 3, 0);
> +	if (cs_mask & (1 << 4))
> +		at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
> +	if (cs_mask & (1 << 5))
> +		at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
> +	if (cs_mask & (1 << 6))
> +		at91_set_pio_output(AT91_PIO_PORTA, 1, 0);
> +	if (cs_mask & (1 << 7))
> +		at91_set_pio_output(AT91_PIO_PORTB, 3, 0);
> +}
> +
> +void at91_spi1_hw_init(unsigned long cs_mask)
> +{
> +	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_PMC_BASE;
> +
> +	at91_set_b_periph(AT91_PIO_PORTA, 21, 0);	/* SPI1_MISO */
> +	at91_set_b_periph(AT91_PIO_PORTA, 22, 0);	/* SPI1_MOSI */
> +	at91_set_b_periph(AT91_PIO_PORTA, 23, 0);	/* SPI1_SPCK */
> +
> +	/* Enable clock */
> +	writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
> +
> +	if (cs_mask & (1 << 0))
> +		at91_set_b_periph(AT91_PIO_PORTA, 8, 0);
> +	if (cs_mask & (1 << 1))
> +		at91_set_b_periph(AT91_PIO_PORTA, 0, 0);
> +	if (cs_mask & (1 << 2))
> +		at91_set_b_periph(AT91_PIO_PORTA, 31, 0);
> +	if (cs_mask & (1 << 3))
> +		at91_set_b_periph(AT91_PIO_PORTA, 30, 0);
> +	if (cs_mask & (1 << 4))
> +		at91_set_pio_output(AT91_PIO_PORTA, 8, 0);
> +	if (cs_mask & (1 << 5))
> +		at91_set_pio_output(AT91_PIO_PORTA, 0, 0);
> +	if (cs_mask & (1 << 6))
> +		at91_set_pio_output(AT91_PIO_PORTA, 31, 0);
> +	if (cs_mask & (1 << 7))
> +		at91_set_pio_output(AT91_PIO_PORTA, 30, 0);
> +}
> +#endif
> +
> +#ifdef CONFIG_MACB
> +void at91_macb_hw_init(void)
> +{
> +	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
> +
> +	if (has_emac0()) {
> +		/* Enable EMAC0 clock */
> +		writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
> +		/* EMAC0 pins setup */
> +		at91_set_a_periph(AT91_PIO_PORTB, 4, 0);	/* ETXCK */
> +		at91_set_a_periph(AT91_PIO_PORTB, 3, 0);	/* ERXDV */
> +		at91_set_a_periph(AT91_PIO_PORTB, 0, 0);	/* ERX0 */
> +		at91_set_a_periph(AT91_PIO_PORTB, 1, 0);	/* ERX1 */
> +		at91_set_a_periph(AT91_PIO_PORTB, 2, 0);	/* ERXER */
> +		at91_set_a_periph(AT91_PIO_PORTB, 7, 0);	/* ETXEN */
> +		at91_set_a_periph(AT91_PIO_PORTB, 9, 0);	/* ETX0 */
> +		at91_set_a_periph(AT91_PIO_PORTB, 10, 0);	/* ETX1 */
> +		at91_set_a_periph(AT91_PIO_PORTB, 5, 0);	/* EMDIO */
> +		at91_set_a_periph(AT91_PIO_PORTB, 6, 0);	/* EMDC */
> +	}
> +
> +	if (has_emac1()) {
> +		/* Enable EMAC1 clock */
> +		writel(1 << ATMEL_ID_EMAC1, &pmc->pcer);
> +		/* EMAC1 pins setup */
> +		at91_set_b_periph(AT91_PIO_PORTC, 29, 0);	/* ETXCK */
> +		at91_set_b_periph(AT91_PIO_PORTC, 28, 0);	/* ECRSDV */
> +		at91_set_b_periph(AT91_PIO_PORTC, 20, 0);	/* ERXO */
> +		at91_set_b_periph(AT91_PIO_PORTC, 21, 0);	/* ERX1 */
> +		at91_set_b_periph(AT91_PIO_PORTC, 16, 0);	/* ERXER */
> +		at91_set_b_periph(AT91_PIO_PORTC, 27, 0);	/* ETXEN */
> +		at91_set_b_periph(AT91_PIO_PORTC, 18, 0);	/* ETX0 */
> +		at91_set_b_periph(AT91_PIO_PORTC, 19, 0);	/* ETX1 */
> +		at91_set_b_periph(AT91_PIO_PORTC, 31, 0);	/* EMDIO */
> +		at91_set_b_periph(AT91_PIO_PORTC, 30, 0);	/* EMDC */
> +	}
> +
> +#ifndef CONFIG_RMII
> +	/* Only emac0 support MII */
> +	if (has_emac0()) {
> +		at91_set_b_periph(AT91_PIO_PORTB, 16, 0);	/* ECRS */
> +		at91_set_b_periph(AT91_PIO_PORTB, 17, 0);	/* ECOL */
> +		at91_set_b_periph(AT91_PIO_PORTB, 13, 0);	/* ERX2 */
> +		at91_set_b_periph(AT91_PIO_PORTB, 14, 0);	/* ERX3 */
> +		at91_set_b_periph(AT91_PIO_PORTB, 15, 0);	/* ERXCK */
> +		at91_set_b_periph(AT91_PIO_PORTB, 11, 0);	/* ETX2 */
> +		at91_set_b_periph(AT91_PIO_PORTB, 12, 0);	/* ETX3 */
> +		at91_set_b_periph(AT91_PIO_PORTB, 8, 0);	/* ETXER */
> +	}
> +#endif
> +}
> +#endif
> diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c
> index a7085de..dc5c6c4 100644
> --- a/arch/arm/cpu/arm926ejs/at91/clock.c
> +++ b/arch/arm/cpu/arm926ejs/at91/clock.c
> @@ -154,7 +154,8 @@ int at91_clock_init(unsigned long main_clock)
>  	 * For now, assume this parentage won't change.
>  	 */
>  	mckr = readl(&pmc->mckr);
> -#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
> +#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
> +		|| defined(CONFIG_AT91SAM9X5)
>  	/* plla divisor by 2 */
>  	gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
>  #endif
> @@ -168,7 +169,14 @@ int at91_clock_init(unsigned long main_clock)
>  		freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq;
>  	if (mckr & AT91_PMC_MCKR_MDIV_MASK)
>  		freq /= 2;			/* processor clock division */
> -#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
> +#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
> +		|| defined(CONFIG_AT91SAM9X5)
> +	/* mdiv <==> divisor
> +	 *  0   <==>   1
> +	 *  1   <==>   2
> +	 *  2   <==>   4
> +	 *  3   <==>   3
> +	 */
>  	gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
>  		(AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
>  		? freq / 3
> diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
> index 6d97189..b9a93b0 100644
> --- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
> +++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
> @@ -23,6 +23,8 @@
>  #include <asm/arch/at91cap9_matrix.h>
>  #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
>  #include <asm/arch/at91sam9g45_matrix.h>
> +#elif defined(CONFIG_AT91SAM9X5)
> +#include <asm/arch/at91sam9x5_matrix.h>
>  #else
>  #error "Unsupported AT91SAM9/CAP9 processor"
>  #endif
> diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h
> new file mode 100644
> index 0000000..0e728c9
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h
> @@ -0,0 +1,170 @@
> +/*
> + * Chip-specific header file for the AT91SAM9x5 family
> + *
> + *  Copyright (C) 2012 Atmel Corporation.
> + *
> + * Definitions for the SoC:
> + * AT91SAM9x5
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __AT91SAM9X5_H__
> +#define __AT91SAM9X5_H__
> +
> +/*
> + * Peripheral identifiers/interrupts.
> + */
> +#define ATMEL_ID_FIQ	0	/* Advanced Interrupt Controller (FIQ) */
> +#define ATMEL_ID_SYS	1	/* System Controller Interrupt */
> +#define ATMEL_ID_PIOAB	2	/* Parallel I/O Controller A and B */
> +#define ATMEL_ID_PIOCD	3	/* Parallel I/O Controller C and D */
> +#define ATMEL_ID_SMD	4	/* SMD Soft Modem (SMD) */
> +#define ATMEL_ID_USART0	5	/* USART 0 */
> +#define ATMEL_ID_USART1	6	/* USART 1 */
> +#define ATMEL_ID_USART2	7	/* USART 2 */
> +#define ATMEL_ID_TWI0	9	/* Two-Wire Interface 0 */
> +#define ATMEL_ID_TWI1	10	/* Two-Wire Interface 1 */
> +#define ATMEL_ID_TWI2	11	/* Two-Wire Interface 2 */
> +#define ATMEL_ID_HSMCI0	12	/* High Speed Multimedia Card Interface 0 */
> +#define ATMEL_ID_SPI0	13	/* Serial Peripheral Interface 0 */
> +#define ATMEL_ID_SPI1	14	/* Serial Peripheral Interface 1 */
> +#define ATMEL_ID_UART0	15	/* UART 0 */
> +#define ATMEL_ID_UART1	16	/* UART 1 */
> +#define ATMEL_ID_TC01	17	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
> +#define ATMEL_ID_PWM	18	/* Pulse Width Modulation Controller */
> +#define ATMEL_ID_ADC	19	/* ADC Controller */
> +#define ATMEL_ID_DMAC0	20	/* DMA Controller 0 */
> +#define ATMEL_ID_DMAC1	21	/* DMA Controller 1 */
> +#define ATMEL_ID_UHPHS	22	/* USB Host High Speed */
> +#define ATMEL_ID_UDPHS	23	/* USB Device High Speed */
> +#define ATMEL_ID_EMAC0	24	/* Ethernet MAC0 */
> +#define ATMEL_ID_LCDC	25	/* LCD Controller */
> +#define ATMEL_ID_HSMCI1	26	/* High Speed Multimedia Card Interface 1 */
> +#define ATMEL_ID_EMAC1	27	/* Ethernet MAC1 */
> +#define ATMEL_ID_SSC	28	/* Synchronous Serial Controller */
> +#define ATMEL_ID_IRQ	31	/* Advanced Interrupt Controller */
> +
> +/*
> + * User Peripheral physical base addresses.
> + */
> +#define ATMEL_BASE_SPI0		0xf0000000
> +#define ATMEL_BASE_SPI1		0xf0004000
> +#define ATMEL_BASE_HSMCI0	0xf0008000
> +#define ATMEL_BASE_HSMCI1	0xf000c000
> +#define ATMEL_BASE_SSC		0xf0010000
> +#define ATMEL_BASE_CAN0		0xf8000000
> +#define ATMEL_BASE_CAN1		0xf8004000
> +#define ATMEL_BASE_TC0		0xf8008000
> +#define ATMEL_BASE_TC1		0xf8008040
> +#define ATMEL_BASE_TC2		0xf8008080
> +#define ATMEL_BASE_TC3		0xf800c000
> +#define ATMEL_BASE_TC4		0xf800c040
> +#define ATMEL_BASE_TC5		0xf800c080
> +#define ATMEL_BASE_TWI0		0xf8010000
> +#define ATMEL_BASE_TWI1		0xf8014000
> +#define ATMEL_BASE_TWI2		0xf8018000
> +#define ATMEL_BASE_USART0	0xf801c000
> +#define ATMEL_BASE_USART1	0xf8020000
> +#define ATMEL_BASE_USART2	0xf8024000
> +#define ATMEL_BASE_USART3	0xf8028000
> +#define ATMEL_BASE_EMAC0	0xf802c000
> +#define ATMEL_BASE_EMAC1	0xf8030000
> +#define ATMEL_BASE_PWM		0xf8034000
> +#define ATMEL_BASE_LCDC		0xf8038000
> +#define ATMEL_BASE_UDPHS	0xf803c000
> +#define ATMEL_BASE_UART0	0xf8040000
> +#define ATMEL_BASE_UART1	0xf8044000
> +#define ATMEL_BASE_ISI		0xf8048000
> +#define ATMEL_BASE_ADC		0xf804c000
> +#define ATMEL_BASE_SYS		0xffffc000
> +
> +/*
> + * System Peripherals
> + */
> +#define ATMEL_BASE_MATRIX	0xffffde00
> +#define ATMEL_BASE_PMECC	0xffffe000
> +#define ATMEL_BASE_PMERRLOC	0xffffe600
> +#define ATMEL_BASE_DDRSDRC	0xffffe800
> +#define ATMEL_BASE_SMC		0xffffea00
> +#define ATMEL_BASE_DMAC0	0xffffec00
> +#define ATMEL_BASE_DMAC1	0xffffee00
> +#define ATMEL_BASE_AIC		0xfffff000
> +#define ATMEL_BASE_DBGU		0xfffff200
> +#define ATMEL_BASE_PIOA		0xfffff400
> +#define ATMEL_BASE_PIOB		0xfffff600
> +#define ATMEL_BASE_PIOC		0xfffff800
> +#define ATMEL_BASE_PIOD		0xfffffa00
> +#define ATMEL_BASE_PMC		0xfffffc00
> +#define ATMEL_BASE_RSTC		0xfffffe00
> +#define ATMEL_BASE_SHDWC	0xfffffe10
> +#define ATMEL_BASE_PIT		0xfffffe30
> +#define ATMEL_BASE_WDT		0xfffffe40
> +#define ATMEL_BASE_GPBR		0xfffffe60
> +#define ATMEL_BASE_RTC		0xfffffeb0
> +
> +/*
> + * Internal Memory.
> + */
> +#define ATMEL_BASE_ROM		0x00100000 /* Internal ROM base address */
> +#define ATMEL_BASE_SRAM		0x00300000 /* Internal SRAM base address */
> +#define ATMEL_BASE_SMD		0x00400000 /* SMD Controller */
> +#define ATMEL_BASE_UDPHS_FIFO	0x00500000 /* USB Device HS controller */
> +#define ATMEL_BASE_OHCI		0x00600000 /* USB Host controller (OHCI) */
> +#define ATMEL_BASE_EHCI		0x00700000 /* USB Host controller (EHCI) */
> +
> +/* 9x5 series chip id definitions */
> +#define ARCH_ID_AT91SAM9X5	0x819a05a0
> +#define ARCH_ID_VERSION_MASK	0x1f
> +#define ARCH_EXID_AT91SAM9G15	0x00000000
> +#define ARCH_EXID_AT91SAM9G35	0x00000001
> +#define ARCH_EXID_AT91SAM9X35	0x00000002
> +#define ARCH_EXID_AT91SAM9G25	0x00000003
> +#define ARCH_EXID_AT91SAM9X25	0x00000004
> +
> +#define cpu_is_at91sam9x5()	(get_chip_id() == ARCH_ID_AT91SAM9X5)
> +#define cpu_is_at91sam9g15()	(cpu_is_at91sam9x5() && \
> +			(get_extension_chip_id() == ARCH_EXID_AT91SAM9G15))
> +#define cpu_is_at91sam9g25()	(cpu_is_at91sam9x5() && \
> +			(get_extension_chip_id() == ARCH_EXID_AT91SAM9G25))
> +#define cpu_is_at91sam9g35()	(cpu_is_at91sam9x5() && \
> +			(get_extension_chip_id() == ARCH_EXID_AT91SAM9G35))
> +#define cpu_is_at91sam9x25()	(cpu_is_at91sam9x5() && \
> +			(get_extension_chip_id() == ARCH_EXID_AT91SAM9X25))
> +#define cpu_is_at91sam9x35()	(cpu_is_at91sam9x5() && \
> +			(get_extension_chip_id() == ARCH_EXID_AT91SAM9X35))
> +
> +/*
> + * Cpu Name
> + */
> +#define CONFIG_SYS_AT91_G15_CPU_NAME	"AT91SAM9G15"
> +#define CONFIG_SYS_AT91_G25_CPU_NAME	"AT91SAM9G25"
> +#define CONFIG_SYS_AT91_G35_CPU_NAME	"AT91SAM9G35"
> +#define CONFIG_SYS_AT91_X25_CPU_NAME	"AT91SAM9X25"
> +#define CONFIG_SYS_AT91_X35_CPU_NAME	"AT91SAM9X35"
> +#define CONFIG_SYS_AT91_UNKNOWN_CPU	"Unknown CPU type"
> +#define ATMEL_CPU_NAME	get_cpu_name()
> +
> +/*
> + * Other misc defines
> + */
> +#define ATMEL_PIO_PORTS         4
> +#define CPU_HAS_PIO3
> +#define PIO_SCDR_DIV            (0x3fff <<  0)  /* Slow Clock Divider Mask */
> +
> +/*
> + * at91sam9x5 specific prototypes
> + */
> +#ifndef __ASSEMBLY__
> +unsigned int get_chip_id(void);
> +unsigned int get_extension_chip_id(void);
> +unsigned int has_emac1(void);
> +unsigned int has_emac0(void);
> +unsigned int has_lcdc(void);
> +char *get_cpu_name(void);
> +#endif
> +
> +#endif
> diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
> new file mode 100644
> index 0000000..d6ce6fa
> --- /dev/null
> +++ b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
> @@ -0,0 +1,91 @@
> +/*
> + * Matrix-centric header file for the AT91SAM9X5 family
> + *
> + *  Copyright (C) 2012 Atmel Corporation.
> + *
> + * Memory Controllers (MATRIX, EBI) - System peripherals registers.
> + * Based on AT91SAM9X5 preliminary datasheet.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#ifndef __AT91SAM9X5_MATRIX_H__
> +#define __AT91SAM9X5_MATRIX_H__
> +
> +#ifndef __ASSEMBLY__
> +
> +struct at91_matrix {
> +	u32	mcfg[16];
> +	u32	scfg[16];
> +	u32	pras[16][2];
> +	u32	mrcr;           /* 0x100 Master Remap Control */
> +	u32	filler[7];
> +	u32	ebicsa;
> +	u32	filler4[47];
> +	u32	wpmr;
> +	u32	wpsr;
> +};
> +
> +#endif /* __ASSEMBLY__ */
> +
> +#define AT91_MATRIX_ULBT_INFINITE	(0 << 0)
> +#define AT91_MATRIX_ULBT_SINGLE		(1 << 0)
> +#define AT91_MATRIX_ULBT_FOUR		(2 << 0)
> +#define AT91_MATRIX_ULBT_EIGHT		(3 << 0)
> +#define AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
> +#define AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
> +#define AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
> +#define AT91_MATRIX_ULBT_128		(7 << 0)
> +
> +#define AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
> +#define AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
> +#define AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
> +#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18
> +
> +#define AT91_MATRIX_M0PR_SHIFT          0
> +#define AT91_MATRIX_M1PR_SHIFT          4
> +#define AT91_MATRIX_M2PR_SHIFT          8
> +#define AT91_MATRIX_M3PR_SHIFT          12
> +#define AT91_MATRIX_M4PR_SHIFT          16
> +#define AT91_MATRIX_M5PR_SHIFT          20
> +#define AT91_MATRIX_M6PR_SHIFT          24
> +#define AT91_MATRIX_M7PR_SHIFT          28
> +
> +#define AT91_MATRIX_M8PR_SHIFT          0  /* register B */
> +#define AT91_MATRIX_M9PR_SHIFT          4  /* register B */
> +#define AT91_MATRIX_M10PR_SHIFT         8  /* register B */
> +#define AT91_MATRIX_M11PR_SHIFT         12 /* register B */
> +
> +#define AT91_MATRIX_RCB0                (1 << 0)
> +#define AT91_MATRIX_RCB1                (1 << 1)
> +#define AT91_MATRIX_RCB2                (1 << 2)
> +#define AT91_MATRIX_RCB3                (1 << 3)
> +#define AT91_MATRIX_RCB4                (1 << 4)
> +#define AT91_MATRIX_RCB5                (1 << 5)
> +#define AT91_MATRIX_RCB6                (1 << 6)
> +#define AT91_MATRIX_RCB7                (1 << 7)
> +#define AT91_MATRIX_RCB8                (1 << 8)
> +#define AT91_MATRIX_RCB9                (1 << 9)
> +#define AT91_MATRIX_RCB10               (1 << 10)
> +
> +#define AT91_MATRIX_EBI_CS1A_SMC                (0 << 1)
> +#define AT91_MATRIX_EBI_CS1A_SDRAMC             (1 << 1)
> +#define AT91_MATRIX_EBI_CS3A_SMC                (0 << 3)
> +#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA     (1 << 3)
> +#define AT91_MATRIX_EBI_DBPU_ON                 (0 << 8)
> +#define AT91_MATRIX_EBI_DBPU_OFF                (1 << 8)
> +#define AT91_MATRIX_EBI_DBPD_ON                 (0 << 9)
> +#define AT91_MATRIX_EBI_DBPD_OFF                (1 << 9)
> +#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V          (0 << 16)
> +#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V          (1 << 16)
> +#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED        (0 << 17)
> +#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL         (1 << 17)
> +#define AT91_MATRIX_NFD0_ON_D0                  (0 << 24)
> +#define AT91_MATRIX_NFD0_ON_D16                 (1 << 24)
> +#define AT91_MATRIX_MP_OFF                      (0 << 25)
> +#define AT91_MATRIX_MP_ON                       (1 << 25)
> +
> +#endif
> diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
> index 85c2889..4c4ee70 100644
> --- a/arch/arm/include/asm/arch-at91/hardware.h
> +++ b/arch/arm/include/asm/arch-at91/hardware.h
> @@ -37,6 +37,8 @@
>  # include <asm/arch/at91sam9rl.h>
>  #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
>  # include <asm/arch/at91sam9g45.h>
> +#elif defined(CONFIG_AT91SAM9X5)
> +# include <asm/arch/at91sam9x5.h>
>  #elif defined(CONFIG_AT91CAP9)
>  # include <asm/arch/at91cap9.h>
>  #elif defined(CONFIG_AT91X40)
> diff --git a/board/atmel/at91sam9x5ek/Makefile b/board/atmel/at91sam9x5ek/Makefile
> new file mode 100644
> index 0000000..458d9a0
> --- /dev/null
> +++ b/board/atmel/at91sam9x5ek/Makefile
> @@ -0,0 +1,52 @@
> +#
> +# (C) Copyright 2003-2008
> +# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
> +#
> +# (C) Copyright 2008
> +# Stelian Pop <stelian@popies.net>
> +# Lead Tech Design <www.leadtechdesign.com>
> +#
> +# (C) Copyright 2012
> +# Bo Shen <voice.shen@atmel.com>
> +# Atmel corporation <www.atmel.com>
> +#
> +# See file CREDITS for list of people who contributed to this
> +# project.
> +#
> +# This program is free software; you can redistribute it and/or
> +# modify it under the terms of the GNU General Public License as
> +# published by the Free Software Foundation; either version 2 of
> +# the License, or (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; if not, write to the Free Software
> +# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> +# MA 02111-1307 USA
> +#
> +
> +include $(TOPDIR)/config.mk
> +
> +LIB	= $(obj)lib$(BOARD).o
> +
> +COBJS-y += at91sam9x5ek.o
> +
> +SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
> +OBJS	:= $(addprefix $(obj),$(COBJS-y))
> +SOBJS	:= $(addprefix $(obj),$(SOBJS))
> +
> +$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
> +	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
> +
> +#########################################################################
> +
> +# defines $(obj).depend target
> +include $(SRCTREE)/rules.mk
> +
> +sinclude $(obj).depend
> +
> +#########################################################################
> diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
> new file mode 100644
> index 0000000..ef84941
> --- /dev/null
> +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
> @@ -0,0 +1,299 @@
> +/*
> + * Copyright (C) 2012 Atmel Corporation
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#include <common.h>
> +#include <asm/io.h>
> +#include <asm/arch/at91sam9x5_matrix.h>
> +#include <asm/arch/at91sam9_smc.h>
> +#include <asm/arch/at91_common.h>
> +#include <asm/arch/at91_pmc.h>
> +#include <asm/arch/at91_rstc.h>
> +#include <asm/arch/gpio.h>
> +#include <asm/arch/clk.h>
> +#include <lcd.h>
> +#include <atmel_hlcdc.h>
> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
> +#include <net.h>
> +#endif
> +#include <netdev.h>
> +#ifdef CONFIG_LCD_INFO
> +#include <nand.h>
> +#include <version.h>
> +#endif
> +#ifdef CONFIG_ATMEL_SPI
> +#include <spi.h>
> +#endif
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/* ------------------------------------------------------------------------- */
> +/*
> + * Miscelaneous platform dependent initialisations
> + */
> +#ifdef CONFIG_CMD_NAND
> +static void at91sam9x5ek_nand_hw_init(void)
> +{
> +	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
> +	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
> +	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> +	unsigned long csa;
> +
> +	/* Enable CS3 */
> +	csa = readl(&matrix->ebicsa);
> +	csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
> +	writel(csa, &matrix->ebicsa);
> +
> +	/* Configure SMC CS3 for NAND/SmartMedia */
> +	writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
> +		AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
> +		&smc->cs[3].setup);
> +	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) |
> +		AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4),
> +		&smc->cs[3].pulse);
> +	writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
> +		&smc->cs[3].cycle);
> +	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
> +		AT91_SMC_MODE_EXNW_DISABLE |
> +#ifdef CONFIG_SYS_NAND_DBW_16
> +		AT91_SMC_MODE_DBW_16 |
> +#else /* CONFIG_SYS_NAND_DBW_8 */
> +		AT91_SMC_MODE_DBW_8 |
> +#endif
> +		AT91_SMC_MODE_TDF_CYCLE(3),
> +		&smc->cs[3].mode);
> +
> +	writel(1 << ATMEL_ID_PIOCD, &pmc->pcer);
> +
> +	/* Configure RDY/BSY */
> +	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
> +	/* Enable NandFlash */
> +	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
> +
> +	at91_set_a_periph(AT91_PIO_PORTD, 0, 1);	/* NAND OE */
> +	at91_set_a_periph(AT91_PIO_PORTD, 1, 1);	/* NAND WE */
> +	at91_set_a_periph(AT91_PIO_PORTD, 2, 1);	/* NAND ALE */
> +	at91_set_a_periph(AT91_PIO_PORTD, 3, 1);	/* NAND CLE */
> +	at91_set_a_periph(AT91_PIO_PORTD, 6, 1);
> +	at91_set_a_periph(AT91_PIO_PORTD, 7, 1);
> +	at91_set_a_periph(AT91_PIO_PORTD, 8, 1);
> +	at91_set_a_periph(AT91_PIO_PORTD, 9, 1);
> +	at91_set_a_periph(AT91_PIO_PORTD, 10, 1);
> +	at91_set_a_periph(AT91_PIO_PORTD, 11, 1);
> +	at91_set_a_periph(AT91_PIO_PORTD, 12, 1);
> +	at91_set_a_periph(AT91_PIO_PORTD, 13, 1);
> +}
> +#endif
> +
> +#ifdef CONFIG_RESET_PHY_R
> +void reset_phy(void)
> +{
> +}
> +#endif

You removed the CONFIG_RESET_PHY_R so why don't remove this empty unused
function here?

> +
> +int board_eth_init(bd_t *bis)
> +{
> +	int rc = 0;
> +
> +#ifdef CONFIG_MACB
> +	if (has_emac0())
> +		rc = macb_eth_initialize(0,
> +			(void *)ATMEL_BASE_EMAC0, 0x00);
> +	if (has_emac1())
> +		rc = macb_eth_initialize(1,
> +			(void *)ATMEL_BASE_EMAC1, 0x00);
> +#endif
> +	return rc;
> +}
> +
> +#ifdef CONFIG_LCD
> +vidinfo_t panel_info = {
> +	.vl_col	= 800,
> +	.vl_row = 480,
> +	.vl_clk = 24000000,
> +	.vl_sync = LCDC_LCDCFG5_HSPOL | LCDC_LCDCFG5_VSPOL,
> +	.vl_bpix = LCD_BPP,
> +	.vl_tft = 1,
> +	.vl_clk_pol = 1,
> +	.vl_hsync_len = 128,
> +	.vl_left_margin = 64,
> +	.vl_right_margin = 64,
> +	.vl_vsync_len = 2,
> +	.vl_upper_margin = 22,
> +	.vl_lower_margin = 21,
> +	.mmio = ATMEL_BASE_LCDC,
> +};
> +
> +void lcd_enable(void)
> +{
> +	if (has_lcdc())
> +		at91_set_a_periph(AT91_PIO_PORTC, 29, 1);	/* power up */
> +}
> +
> +void lcd_disable(void)
> +{
> +	if (has_lcdc())
> +		at91_set_a_periph(AT91_PIO_PORTC, 29, 0);	/* power down */
> +}
> +
> +static void at91sam9x5ek_lcd_hw_init(void)
> +{
> +	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
> +
> +	if (has_lcdc()) {
> +		at91_set_a_periph(AT91_PIO_PORTC, 26, 0);	/* LCDPWM */
> +		at91_set_a_periph(AT91_PIO_PORTC, 27, 0);	/* LCDVSYNC */
> +		at91_set_a_periph(AT91_PIO_PORTC, 28, 0);	/* LCDHSYNC */
> +		at91_set_a_periph(AT91_PIO_PORTC, 24, 0);	/* LCDDISP */
> +		at91_set_a_periph(AT91_PIO_PORTC, 29, 0);	/* LCDDEN */
> +		at91_set_a_periph(AT91_PIO_PORTC, 30, 0);	/* LCDPCK */
> +
> +		at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* LCDD0 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* LCDD1 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* LCDD2 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 3, 0);	/* LCDD3 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 4, 0);	/* LCDD4 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 5, 0);	/* LCDD5 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 6, 0);	/* LCDD6 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 7, 0);	/* LCDD7 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 8, 0);	/* LCDD8 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 9, 0);	/* LCDD9 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 10, 0);	/* LCDD10 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 11, 0);	/* LCDD11 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 12, 0);	/* LCDD12 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 13, 0);	/* LCDD13 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 14, 0);	/* LCDD14 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 15, 0);	/* LCDD15 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 16, 0);	/* LCDD16 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 17, 0);	/* LCDD17 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 18, 0);	/* LCDD18 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 19, 0);	/* LCDD19 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 20, 0);	/* LCDD20 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 21, 0);	/* LCDD21 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 22, 0);	/* LCDD22 */
> +		at91_set_a_periph(AT91_PIO_PORTC, 23, 0);	/* LCDD23 */
> +
> +		writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
> +	}
> +}
> +
> +#ifdef CONFIG_LCD_INFO
> +void lcd_show_board_info(void)
> +{
> +	ulong dram_size, nand_size;
> +	int i;
> +	char temp[32];
> +
> +	if (has_lcdc()) {
> +		lcd_printf("%s\n", U_BOOT_VERSION);
> +		lcd_printf("(C) 2012 ATMEL Corp\n");
> +		lcd_printf("at91support@atmel.com\n");
> +		lcd_printf("%s CPU at %s MHz\n",
> +			get_cpu_name(),
> +			strmhz(temp, get_cpu_clk_rate()));
> +
> +		dram_size = 0;
> +		for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
> +			dram_size += gd->bd->bi_dram[i].size;
> +		nand_size = 0;
> +		for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
> +			nand_size += nand_info[i].size;
> +		lcd_printf("  %ld MB SDRAM, %ld MB NAND\n",
> +			dram_size >> 20,
> +			nand_size >> 20);
> +	}
> +}
> +#endif /* CONFIG_LCD_INFO */
> +#endif /* CONFIG_LCD */
> +
> +/* SPI chip select control */
> +#ifdef CONFIG_ATMEL_SPI
> +int spi_cs_is_valid(unsigned int bus, unsigned int cs)
> +{
> +	return bus == 0 && cs < 2;
> +}
> +
> +void spi_cs_activate(struct spi_slave *slave)
> +{
> +	switch (slave->cs) {
> +	case 1:
> +		at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
> +		break;
> +	case 0:
> +	default:
> +		at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
> +		break;
> +	}
> +}
> +
> +void spi_cs_deactivate(struct spi_slave *slave)
> +{
> +	switch (slave->cs) {
> +	case 1:
> +		at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
> +		break;
> +	case 0:
> +	default:
> +		at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
> +		break;
> +	}
> +}
> +#endif /* CONFIG_ATMEL_SPI */
> +
> +int board_early_init_f(void)
> +{
> +	at91_seriald_hw_init();
> +	return 0;
> +}
> +
> +int board_init(void)
> +{
> +	/* arch number of AT91SAM9X5EK-Board */
> +	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK;
> +
> +	/* adress of boot parameters */
> +	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
> +
> +#ifdef CONFIG_CMD_NAND
> +	at91sam9x5ek_nand_hw_init();
> +#endif
> +
> +#ifdef CONFIG_ATMEL_SPI
> +	at91_spi0_hw_init(1 << 0);
> +	at91_spi0_hw_init(1 << 4);
> +#endif
> +
> +#ifdef CONFIG_MACB
> +	at91_macb_hw_init();
> +#endif
> +
> +#ifdef CONFIG_LCD
> +	at91sam9x5ek_lcd_hw_init();
> +#endif
> +	return 0;
> +}
> +
> +int dram_init(void)
> +{
> +	gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
> +					CONFIG_SYS_SDRAM_SIZE);
> +	return 0;
> +}
> diff --git a/board/atmel/at91sam9x5ek/config.mk b/board/atmel/at91sam9x5ek/config.mk
> new file mode 100644
> index 0000000..6589a12
> --- /dev/null
> +++ b/board/atmel/at91sam9x5ek/config.mk
> @@ -0,0 +1 @@
> +CONFIG_SYS_TEXT_BASE = 0x26f00000
> diff --git a/boards.cfg b/boards.cfg
> index 9205070..c9bd1b3 100644
> --- a/boards.cfg
> +++ b/boards.cfg
> @@ -89,6 +89,7 @@ at91sam9g20ek_nandflash      arm         arm926ejs   at91sam9260ek       atmel
>  at91sam9m10g45ek_nandflash   arm         arm926ejs   at91sam9m10g45ek    atmel          at91        at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH
>  at91sam9rlek_dataflash       arm         arm926ejs   at91sam9rlek        atmel          at91        at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
>  at91sam9rlek_nandflash       arm         arm926ejs   at91sam9rlek        atmel          at91        at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
> +at91sam9x5ek_nandflash       arm         arm926ejs   at91sam9x5ek        atmel          at91        at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH
>  at91sam9xeek_dataflash_cs0   arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
>  at91sam9xeek_dataflash_cs1   arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
>  at91sam9xeek_nandflash       arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 4578467..8f55cdc 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -471,7 +471,7 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
>  #if	defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
>  	defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
>  	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
> -	defined(CONFIG_AT91SAM9XE)
> +	defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
>  	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
>  #else
>  	macb_writel(macb, USRIO, 0);
> @@ -480,7 +480,7 @@ static int macb_init(struct eth_device *netdev, bd_t *bd)
>  #if	defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
>  	defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
>  	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
> -	defined(CONFIG_AT91SAM9XE)
> +	defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
>  	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
>  #else
>  	macb_writel(macb, USRIO, MACB_BIT(MII));
> diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
> new file mode 100644
> index 0000000..d8f9b5e
> --- /dev/null
> +++ b/include/configs/at91sam9x5ek.h
> @@ -0,0 +1,184 @@
> +/*
> + * Copyright (C) 2012 Atmel Corporation
> + *
> + * Configuation settings for the AT91SAM9X5EK board.
> + *
> + * See file CREDITS for list of people who contributed to this
> + * project.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + */
> +
> +#ifndef __CONFIG_H__
> +#define __CONFIG_H__
> +
> +#include <asm/hardware.h>
> +
> +/* ARM asynchronous clock */
> +#define CONFIG_SYS_AT91_SLOW_CLOCK	32768
> +#define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
> +#define CONFIG_SYS_HZ			1000
> +
> +#define CONFIG_AT91SAM9X5EK
> +#define CONFIG_AT91FAMILY
> +
> +#define CONFIG_ARCH_CPU_INIT
> +
> +#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_INITRD_TAG
> +#define CONFIG_SKIP_LOWLEVEL_INIT
> +#define CONFIG_BOARD_EARLY_INIT_F
> +#define CONFIG_DISPLAY_CPUINFO
> +
> +/* general purpose I/O */
> +#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
> +#define CONFIG_AT91_GPIO
> +
> +/* serial console */
> +#define CONFIG_ATMEL_USART
> +#define CONFIG_USART_BASE	ATMEL_BASE_DBGU
> +#define CONFIG_USART_ID		ATMEL_ID_SYS
> +
> +/* LCD */
> +#define CONFIG_LCD
> +#define LCD_BPP			LCD_COLOR16
> +#define LCD_OUTPUT_BPP		24
> +#define CONFIG_LCD_LOGO
> +#undef LCD_TEST_PATTERN
> +#define CONFIG_LCD_INFO
> +#define CONFIG_LCD_INFO_BELOW_LOGO
> +#define CONFIG_SYS_WHITE_ON_BLACK
> +#define CONFIG_ATMEL_HLCD
> +#define CONFIG_ATMEL_LCD_RGB565
> +#define CONFIG_SYS_CONSOLE_IS_IN_ENV
> +
> +#define CONFIG_BOOTDELAY	3
> +
> +/*
> + * BOOTP options
> + */
> +#define CONFIG_BOOTP_BOOTFILESIZE
> +#define CONFIG_BOOTP_BOOTPATH
> +#define CONFIG_BOOTP_GATEWAY
> +#define CONFIG_BOOTP_HOSTNAME
> +
> +/*
> + * Command line configuration.
> + */
> +#include <config_cmd_default.h>
> +#undef CONFIG_CMD_FPGA
> +#undef CONFIG_CMD_IMI
> +#undef CONFIG_CMD_IMLS
> +#undef CONFIG_CMD_LOADS
> +
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_NAND
> +
> +/* SDRAM */
> +#define CONFIG_NR_DRAM_BANKS		1
> +#define CONFIG_SYS_SDRAM_BASE		0x20000000
> +#define CONFIG_SYS_SDRAM_SIZE		0x08000000	/* 128 megs */
> +
> +#define CONFIG_SYS_INIT_SP_ADDR \
> +	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
> +
> +/* DataFlash */
> +#ifdef CONFIG_ATMEL_SPI
> +#define CONFIG_CMD_SF
> +#define CONFIG_CMD_SPI
> +#define CONFIG_SPI_FLASH
> +#define CONFIG_SPI_FLASH_ATMEL
> +#define CONFIG_SYS_MAX_DATAFLASH_BANKS
> +#endif
> +
> +/* no NOR flash */
> +#define CONFIG_SYS_NO_FLASH
> +
> +/* NAND flash */
> +#ifdef CONFIG_CMD_NAND
> +#define CONFIG_NAND_ATMEL
> +#define CONFIG_SYS_MAX_NAND_DEVICE	1
> +#define CONFIG_SYS_NAND_BASE		0x40000000
> +#define CONFIG_SYS_NAND_DBW_8		1
> +/* our ALE is AD21 */
> +#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
> +/* our CLE is AD22 */
> +#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
> +#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
> +#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
> +
> +#define CONFIG_MTD_DEVICE
> +#define CONFIG_CMD_MTDPARTS
> +#define CONFIG_MTD_PARTITIONS
> +#define CONFIG_RBTREE
> +#define CONFIG_LZO
> +#define CONFIG_CMD_UBI
> +#define CONFIG_CMD_UBIFS
> +#endif
> +
> +/* Ethernet */
> +#define CONFIG_MACB
> +#define CONFIG_RMII
> +#define CONFIG_NET_MULTI

CONFIG_NET_MULTI is still defined here but was globally removed in
31a4f1e5b6ee9b6335f0313dce7637cef887f84f, please remove it here.

> +#define CONFIG_NET_RETRY_COUNT		20
> +#define CONFIG_MACB_SEARCH_PHY
> +
> +#define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
> +
> +#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_SYS_MEMTEST_END		0x26e00000
> +
> +#ifdef CONFIG_SYS_USE_NANDFLASH
> +/* bootstrap + u-boot + env + linux in nandflash */
> +#define CONFIG_ENV_IS_IN_NAND
> +#define CONFIG_ENV_OFFSET		0xc0000
> +#define CONFIG_ENV_OFFSET_REDUND	0x100000
> +#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
> +#define CONFIG_BOOTCOMMAND	"nand read " \
> +				"0x22000000 0x200000 0x300000; " \
> +				"bootm 0x22000000"
> +#endif
> +
> +#define CONFIG_BOOTARGS		"mem=128M console=ttyS0,115200 " \
> +				"mtdparts=atmel_nand:" \
> +				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
> +				"root=/dev/mtdblock1 rw " \
> +				"rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"
> +
> +#define CONFIG_BAUDRATE		115200
> +
> +#define CONFIG_SYS_PROMPT	"U-Boot> "
> +#define CONFIG_SYS_CBSIZE	256
> +#define CONFIG_SYS_MAXARGS	16
> +#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
> +					+ 16)
> +#define CONFIG_SYS_LONGHELP
> +#define CONFIG_CMDLINE_EDITING
> +#define CONFIG_AUTO_COMPLETE
> +#define CONFIG_SYS_HUSH_PARSER
> +
> +/*
> + * Size of malloc() pool
> + */
> +#define CONFIG_SYS_MALLOC_LEN		(512 * 1024 + 0x1000)
> +
> +#ifdef CONFIG_USE_IRQ
> +#error CONFIG_USE_IRQ not supported
> +#endif
> +
> +#endif
> 


Best regards

Andreas Bießmann

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 6438e1c..a2fccbf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -660,6 +660,9 @@  Sedji Gaouaou<sedji.gaouaou@atmel.com>
 	at91sam9g10ek		ARM926EJS (AT91SAM9G10 SoC)
 	at91sam9m10g45ek	ARM926EJS (AT91SAM9G45 SoC)
 
+Bo Shen <voice.shen@atmel.com>
+	at91sam9x5ek		ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC)
+
 Simon Guinot <simon.guinot@sequanux.org>
 
 	inetspace_v2	ARM926EJS (Kirkwood SoC)
diff --git a/arch/arm/cpu/arm926ejs/at91/Makefile b/arch/arm/cpu/arm926ejs/at91/Makefile
index f333753..346e58f 100644
--- a/arch/arm/cpu/arm926ejs/at91/Makefile
+++ b/arch/arm/cpu/arm926ejs/at91/Makefile
@@ -35,6 +35,7 @@  COBJS-$(CONFIG_AT91SAM9263)	+= at91sam9263_devices.o
 COBJS-$(CONFIG_AT91SAM9RL)	+= at91sam9rl_devices.o
 COBJS-$(CONFIG_AT91SAM9M10G45)	+= at91sam9m10g45_devices.o
 COBJS-$(CONFIG_AT91SAM9G45)	+= at91sam9m10g45_devices.o
+COBJS-$(CONFIG_AT91SAM9X5)	+= at91sam9x5_devices.o
 COBJS-$(CONFIG_AT91_EFLASH)	+= eflash.o
 COBJS-$(CONFIG_AT91_LED)	+= led.o
 COBJS-y += clock.o
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
new file mode 100644
index 0000000..7558ca2
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
@@ -0,0 +1,232 @@ 
+/*
+ * Copyright (C) 2012 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+
+unsigned int get_chip_id(void)
+{
+	/* The 0x40 is the offset of cidr in DBGU */
+	return readl(ATMEL_BASE_DBGU + 0x40) & ~ARCH_ID_VERSION_MASK;
+}
+
+unsigned int get_extension_chip_id(void)
+{
+	/* The 0x44 is the offset of exid in DBGU */
+	return readl(ATMEL_BASE_DBGU + 0x44);
+}
+
+unsigned int has_emac1()
+{
+	return cpu_is_at91sam9x25();
+}
+
+unsigned int has_emac0()
+{
+	return !(cpu_is_at91sam9g15());
+}
+
+unsigned int has_lcdc()
+{
+	return cpu_is_at91sam9g15() || cpu_is_at91sam9g35()
+		|| cpu_is_at91sam9x35();
+}
+
+char *get_cpu_name()
+{
+	unsigned int extension_id = get_extension_chip_id();
+
+	if (cpu_is_at91sam9x5()) {
+		switch (extension_id) {
+		case ARCH_EXID_AT91SAM9G15:
+			return CONFIG_SYS_AT91_G15_CPU_NAME;
+		case ARCH_EXID_AT91SAM9G25:
+			return CONFIG_SYS_AT91_G25_CPU_NAME;
+		case ARCH_EXID_AT91SAM9G35:
+			return CONFIG_SYS_AT91_G35_CPU_NAME;
+		case ARCH_EXID_AT91SAM9X25:
+			return CONFIG_SYS_AT91_X25_CPU_NAME;
+		case ARCH_EXID_AT91SAM9X35:
+			return CONFIG_SYS_AT91_X35_CPU_NAME;
+		default:
+			return CONFIG_SYS_AT91_UNKNOWN_CPU;
+		}
+	} else {
+		return CONFIG_SYS_AT91_UNKNOWN_CPU;
+	}
+}
+
+void at91_seriald_hw_init(void)
+{
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+
+	at91_set_a_periph(AT91_PIO_PORTA, 9, 0);	/* DRXD */
+	at91_set_a_periph(AT91_PIO_PORTA, 10, 1);	/* DTXD */
+
+	writel(1 << ATMEL_ID_SYS, &pmc->pcer);
+}
+
+void at91_serial0_hw_init(void)
+{
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+
+	at91_set_a_periph(AT91_PIO_PORTA, 0, 1);	/* TXD */
+	at91_set_a_periph(AT91_PIO_PORTA, 1, 0);	/* RXD */
+
+	writel(1 << ATMEL_ID_USART0, &pmc->pcer);
+}
+
+void at91_serial1_hw_init(void)
+{
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+
+	at91_set_a_periph(AT91_PIO_PORTA, 5, 1);	/* TXD */
+	at91_set_a_periph(AT91_PIO_PORTA, 6, 0);	/* RXD */
+
+	writel(1 << ATMEL_ID_USART1, &pmc->pcer);
+}
+
+void at91_serial2_hw_init(void)
+{
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+
+	at91_set_a_periph(AT91_PIO_PORTA, 7, 1);	/* TXD */
+	at91_set_a_periph(AT91_PIO_PORTA, 8, 0);	/* RXD */
+
+	writel(1 << ATMEL_ID_USART2, &pmc->pcer);
+}
+
+#ifdef CONFIG_ATMEL_SPI
+void at91_spi0_hw_init(unsigned long cs_mask)
+{
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_PMC_BASE;
+
+	at91_set_a_periph(AT91_PIO_PORTA, 11, 0);	/* SPI0_MISO */
+	at91_set_a_periph(AT91_PIO_PORTA, 12, 0);	/* SPI0_MOSI */
+	at91_set_a_periph(AT91_PIO_PORTA, 13, 0);	/* SPI0_SPCK */
+
+	/* Enable clock */
+	writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
+
+	if (cs_mask & (1 << 0))
+		at91_set_a_periph(AT91_PIO_PORTA, 14, 0);
+	if (cs_mask & (1 << 1))
+		at91_set_b_periph(AT91_PIO_PORTA, 7, 0);
+	if (cs_mask & (1 << 2))
+		at91_set_b_periph(AT91_PIO_PORTA, 1, 0);
+	if (cs_mask & (1 << 3))
+		at91_set_b_periph(AT91_PIO_PORTB, 3, 0);
+	if (cs_mask & (1 << 4))
+		at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
+	if (cs_mask & (1 << 5))
+		at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
+	if (cs_mask & (1 << 6))
+		at91_set_pio_output(AT91_PIO_PORTA, 1, 0);
+	if (cs_mask & (1 << 7))
+		at91_set_pio_output(AT91_PIO_PORTB, 3, 0);
+}
+
+void at91_spi1_hw_init(unsigned long cs_mask)
+{
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_PMC_BASE;
+
+	at91_set_b_periph(AT91_PIO_PORTA, 21, 0);	/* SPI1_MISO */
+	at91_set_b_periph(AT91_PIO_PORTA, 22, 0);	/* SPI1_MOSI */
+	at91_set_b_periph(AT91_PIO_PORTA, 23, 0);	/* SPI1_SPCK */
+
+	/* Enable clock */
+	writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
+
+	if (cs_mask & (1 << 0))
+		at91_set_b_periph(AT91_PIO_PORTA, 8, 0);
+	if (cs_mask & (1 << 1))
+		at91_set_b_periph(AT91_PIO_PORTA, 0, 0);
+	if (cs_mask & (1 << 2))
+		at91_set_b_periph(AT91_PIO_PORTA, 31, 0);
+	if (cs_mask & (1 << 3))
+		at91_set_b_periph(AT91_PIO_PORTA, 30, 0);
+	if (cs_mask & (1 << 4))
+		at91_set_pio_output(AT91_PIO_PORTA, 8, 0);
+	if (cs_mask & (1 << 5))
+		at91_set_pio_output(AT91_PIO_PORTA, 0, 0);
+	if (cs_mask & (1 << 6))
+		at91_set_pio_output(AT91_PIO_PORTA, 31, 0);
+	if (cs_mask & (1 << 7))
+		at91_set_pio_output(AT91_PIO_PORTA, 30, 0);
+}
+#endif
+
+#ifdef CONFIG_MACB
+void at91_macb_hw_init(void)
+{
+	at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
+
+	if (has_emac0()) {
+		/* Enable EMAC0 clock */
+		writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
+		/* EMAC0 pins setup */
+		at91_set_a_periph(AT91_PIO_PORTB, 4, 0);	/* ETXCK */
+		at91_set_a_periph(AT91_PIO_PORTB, 3, 0);	/* ERXDV */
+		at91_set_a_periph(AT91_PIO_PORTB, 0, 0);	/* ERX0 */
+		at91_set_a_periph(AT91_PIO_PORTB, 1, 0);	/* ERX1 */
+		at91_set_a_periph(AT91_PIO_PORTB, 2, 0);	/* ERXER */
+		at91_set_a_periph(AT91_PIO_PORTB, 7, 0);	/* ETXEN */
+		at91_set_a_periph(AT91_PIO_PORTB, 9, 0);	/* ETX0 */
+		at91_set_a_periph(AT91_PIO_PORTB, 10, 0);	/* ETX1 */
+		at91_set_a_periph(AT91_PIO_PORTB, 5, 0);	/* EMDIO */
+		at91_set_a_periph(AT91_PIO_PORTB, 6, 0);	/* EMDC */
+	}
+
+	if (has_emac1()) {
+		/* Enable EMAC1 clock */
+		writel(1 << ATMEL_ID_EMAC1, &pmc->pcer);
+		/* EMAC1 pins setup */
+		at91_set_b_periph(AT91_PIO_PORTC, 29, 0);	/* ETXCK */
+		at91_set_b_periph(AT91_PIO_PORTC, 28, 0);	/* ECRSDV */
+		at91_set_b_periph(AT91_PIO_PORTC, 20, 0);	/* ERXO */
+		at91_set_b_periph(AT91_PIO_PORTC, 21, 0);	/* ERX1 */
+		at91_set_b_periph(AT91_PIO_PORTC, 16, 0);	/* ERXER */
+		at91_set_b_periph(AT91_PIO_PORTC, 27, 0);	/* ETXEN */
+		at91_set_b_periph(AT91_PIO_PORTC, 18, 0);	/* ETX0 */
+		at91_set_b_periph(AT91_PIO_PORTC, 19, 0);	/* ETX1 */
+		at91_set_b_periph(AT91_PIO_PORTC, 31, 0);	/* EMDIO */
+		at91_set_b_periph(AT91_PIO_PORTC, 30, 0);	/* EMDC */
+	}
+
+#ifndef CONFIG_RMII
+	/* Only emac0 support MII */
+	if (has_emac0()) {
+		at91_set_b_periph(AT91_PIO_PORTB, 16, 0);	/* ECRS */
+		at91_set_b_periph(AT91_PIO_PORTB, 17, 0);	/* ECOL */
+		at91_set_b_periph(AT91_PIO_PORTB, 13, 0);	/* ERX2 */
+		at91_set_b_periph(AT91_PIO_PORTB, 14, 0);	/* ERX3 */
+		at91_set_b_periph(AT91_PIO_PORTB, 15, 0);	/* ERXCK */
+		at91_set_b_periph(AT91_PIO_PORTB, 11, 0);	/* ETX2 */
+		at91_set_b_periph(AT91_PIO_PORTB, 12, 0);	/* ETX3 */
+		at91_set_b_periph(AT91_PIO_PORTB, 8, 0);	/* ETXER */
+	}
+#endif
+}
+#endif
diff --git a/arch/arm/cpu/arm926ejs/at91/clock.c b/arch/arm/cpu/arm926ejs/at91/clock.c
index a7085de..dc5c6c4 100644
--- a/arch/arm/cpu/arm926ejs/at91/clock.c
+++ b/arch/arm/cpu/arm926ejs/at91/clock.c
@@ -154,7 +154,8 @@  int at91_clock_init(unsigned long main_clock)
 	 * For now, assume this parentage won't change.
 	 */
 	mckr = readl(&pmc->mckr);
-#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
+		|| defined(CONFIG_AT91SAM9X5)
 	/* plla divisor by 2 */
 	gd->plla_rate_hz /= (1 << ((mckr & 1 << 12) >> 12));
 #endif
@@ -168,7 +169,14 @@  int at91_clock_init(unsigned long main_clock)
 		freq / ((mckr & AT91_PMC_MCKR_MDIV_MASK) >> 7) : freq;
 	if (mckr & AT91_PMC_MCKR_MDIV_MASK)
 		freq /= 2;			/* processor clock division */
-#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
+#elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) \
+		|| defined(CONFIG_AT91SAM9X5)
+	/* mdiv <==> divisor
+	 *  0   <==>   1
+	 *  1   <==>   2
+	 *  2   <==>   4
+	 *  3   <==>   3
+	 */
 	gd->mck_rate_hz = (mckr & AT91_PMC_MCKR_MDIV_MASK) ==
 		(AT91_PMC_MCKR_MDIV_2 | AT91_PMC_MCKR_MDIV_4)
 		? freq / 3
diff --git a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
index 6d97189..b9a93b0 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9_matrix.h
@@ -23,6 +23,8 @@ 
 #include <asm/arch/at91cap9_matrix.h>
 #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
 #include <asm/arch/at91sam9g45_matrix.h>
+#elif defined(CONFIG_AT91SAM9X5)
+#include <asm/arch/at91sam9x5_matrix.h>
 #else
 #error "Unsupported AT91SAM9/CAP9 processor"
 #endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5.h b/arch/arm/include/asm/arch-at91/at91sam9x5.h
new file mode 100644
index 0000000..0e728c9
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/at91sam9x5.h
@@ -0,0 +1,170 @@ 
+/*
+ * Chip-specific header file for the AT91SAM9x5 family
+ *
+ *  Copyright (C) 2012 Atmel Corporation.
+ *
+ * Definitions for the SoC:
+ * AT91SAM9x5
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __AT91SAM9X5_H__
+#define __AT91SAM9X5_H__
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define ATMEL_ID_FIQ	0	/* Advanced Interrupt Controller (FIQ) */
+#define ATMEL_ID_SYS	1	/* System Controller Interrupt */
+#define ATMEL_ID_PIOAB	2	/* Parallel I/O Controller A and B */
+#define ATMEL_ID_PIOCD	3	/* Parallel I/O Controller C and D */
+#define ATMEL_ID_SMD	4	/* SMD Soft Modem (SMD) */
+#define ATMEL_ID_USART0	5	/* USART 0 */
+#define ATMEL_ID_USART1	6	/* USART 1 */
+#define ATMEL_ID_USART2	7	/* USART 2 */
+#define ATMEL_ID_TWI0	9	/* Two-Wire Interface 0 */
+#define ATMEL_ID_TWI1	10	/* Two-Wire Interface 1 */
+#define ATMEL_ID_TWI2	11	/* Two-Wire Interface 2 */
+#define ATMEL_ID_HSMCI0	12	/* High Speed Multimedia Card Interface 0 */
+#define ATMEL_ID_SPI0	13	/* Serial Peripheral Interface 0 */
+#define ATMEL_ID_SPI1	14	/* Serial Peripheral Interface 1 */
+#define ATMEL_ID_UART0	15	/* UART 0 */
+#define ATMEL_ID_UART1	16	/* UART 1 */
+#define ATMEL_ID_TC01	17	/* Timer Counter 0, 1, 2, 3, 4 and 5 */
+#define ATMEL_ID_PWM	18	/* Pulse Width Modulation Controller */
+#define ATMEL_ID_ADC	19	/* ADC Controller */
+#define ATMEL_ID_DMAC0	20	/* DMA Controller 0 */
+#define ATMEL_ID_DMAC1	21	/* DMA Controller 1 */
+#define ATMEL_ID_UHPHS	22	/* USB Host High Speed */
+#define ATMEL_ID_UDPHS	23	/* USB Device High Speed */
+#define ATMEL_ID_EMAC0	24	/* Ethernet MAC0 */
+#define ATMEL_ID_LCDC	25	/* LCD Controller */
+#define ATMEL_ID_HSMCI1	26	/* High Speed Multimedia Card Interface 1 */
+#define ATMEL_ID_EMAC1	27	/* Ethernet MAC1 */
+#define ATMEL_ID_SSC	28	/* Synchronous Serial Controller */
+#define ATMEL_ID_IRQ	31	/* Advanced Interrupt Controller */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define ATMEL_BASE_SPI0		0xf0000000
+#define ATMEL_BASE_SPI1		0xf0004000
+#define ATMEL_BASE_HSMCI0	0xf0008000
+#define ATMEL_BASE_HSMCI1	0xf000c000
+#define ATMEL_BASE_SSC		0xf0010000
+#define ATMEL_BASE_CAN0		0xf8000000
+#define ATMEL_BASE_CAN1		0xf8004000
+#define ATMEL_BASE_TC0		0xf8008000
+#define ATMEL_BASE_TC1		0xf8008040
+#define ATMEL_BASE_TC2		0xf8008080
+#define ATMEL_BASE_TC3		0xf800c000
+#define ATMEL_BASE_TC4		0xf800c040
+#define ATMEL_BASE_TC5		0xf800c080
+#define ATMEL_BASE_TWI0		0xf8010000
+#define ATMEL_BASE_TWI1		0xf8014000
+#define ATMEL_BASE_TWI2		0xf8018000
+#define ATMEL_BASE_USART0	0xf801c000
+#define ATMEL_BASE_USART1	0xf8020000
+#define ATMEL_BASE_USART2	0xf8024000
+#define ATMEL_BASE_USART3	0xf8028000
+#define ATMEL_BASE_EMAC0	0xf802c000
+#define ATMEL_BASE_EMAC1	0xf8030000
+#define ATMEL_BASE_PWM		0xf8034000
+#define ATMEL_BASE_LCDC		0xf8038000
+#define ATMEL_BASE_UDPHS	0xf803c000
+#define ATMEL_BASE_UART0	0xf8040000
+#define ATMEL_BASE_UART1	0xf8044000
+#define ATMEL_BASE_ISI		0xf8048000
+#define ATMEL_BASE_ADC		0xf804c000
+#define ATMEL_BASE_SYS		0xffffc000
+
+/*
+ * System Peripherals
+ */
+#define ATMEL_BASE_MATRIX	0xffffde00
+#define ATMEL_BASE_PMECC	0xffffe000
+#define ATMEL_BASE_PMERRLOC	0xffffe600
+#define ATMEL_BASE_DDRSDRC	0xffffe800
+#define ATMEL_BASE_SMC		0xffffea00
+#define ATMEL_BASE_DMAC0	0xffffec00
+#define ATMEL_BASE_DMAC1	0xffffee00
+#define ATMEL_BASE_AIC		0xfffff000
+#define ATMEL_BASE_DBGU		0xfffff200
+#define ATMEL_BASE_PIOA		0xfffff400
+#define ATMEL_BASE_PIOB		0xfffff600
+#define ATMEL_BASE_PIOC		0xfffff800
+#define ATMEL_BASE_PIOD		0xfffffa00
+#define ATMEL_BASE_PMC		0xfffffc00
+#define ATMEL_BASE_RSTC		0xfffffe00
+#define ATMEL_BASE_SHDWC	0xfffffe10
+#define ATMEL_BASE_PIT		0xfffffe30
+#define ATMEL_BASE_WDT		0xfffffe40
+#define ATMEL_BASE_GPBR		0xfffffe60
+#define ATMEL_BASE_RTC		0xfffffeb0
+
+/*
+ * Internal Memory.
+ */
+#define ATMEL_BASE_ROM		0x00100000 /* Internal ROM base address */
+#define ATMEL_BASE_SRAM		0x00300000 /* Internal SRAM base address */
+#define ATMEL_BASE_SMD		0x00400000 /* SMD Controller */
+#define ATMEL_BASE_UDPHS_FIFO	0x00500000 /* USB Device HS controller */
+#define ATMEL_BASE_OHCI		0x00600000 /* USB Host controller (OHCI) */
+#define ATMEL_BASE_EHCI		0x00700000 /* USB Host controller (EHCI) */
+
+/* 9x5 series chip id definitions */
+#define ARCH_ID_AT91SAM9X5	0x819a05a0
+#define ARCH_ID_VERSION_MASK	0x1f
+#define ARCH_EXID_AT91SAM9G15	0x00000000
+#define ARCH_EXID_AT91SAM9G35	0x00000001
+#define ARCH_EXID_AT91SAM9X35	0x00000002
+#define ARCH_EXID_AT91SAM9G25	0x00000003
+#define ARCH_EXID_AT91SAM9X25	0x00000004
+
+#define cpu_is_at91sam9x5()	(get_chip_id() == ARCH_ID_AT91SAM9X5)
+#define cpu_is_at91sam9g15()	(cpu_is_at91sam9x5() && \
+			(get_extension_chip_id() == ARCH_EXID_AT91SAM9G15))
+#define cpu_is_at91sam9g25()	(cpu_is_at91sam9x5() && \
+			(get_extension_chip_id() == ARCH_EXID_AT91SAM9G25))
+#define cpu_is_at91sam9g35()	(cpu_is_at91sam9x5() && \
+			(get_extension_chip_id() == ARCH_EXID_AT91SAM9G35))
+#define cpu_is_at91sam9x25()	(cpu_is_at91sam9x5() && \
+			(get_extension_chip_id() == ARCH_EXID_AT91SAM9X25))
+#define cpu_is_at91sam9x35()	(cpu_is_at91sam9x5() && \
+			(get_extension_chip_id() == ARCH_EXID_AT91SAM9X35))
+
+/*
+ * Cpu Name
+ */
+#define CONFIG_SYS_AT91_G15_CPU_NAME	"AT91SAM9G15"
+#define CONFIG_SYS_AT91_G25_CPU_NAME	"AT91SAM9G25"
+#define CONFIG_SYS_AT91_G35_CPU_NAME	"AT91SAM9G35"
+#define CONFIG_SYS_AT91_X25_CPU_NAME	"AT91SAM9X25"
+#define CONFIG_SYS_AT91_X35_CPU_NAME	"AT91SAM9X35"
+#define CONFIG_SYS_AT91_UNKNOWN_CPU	"Unknown CPU type"
+#define ATMEL_CPU_NAME	get_cpu_name()
+
+/*
+ * Other misc defines
+ */
+#define ATMEL_PIO_PORTS         4
+#define CPU_HAS_PIO3
+#define PIO_SCDR_DIV            (0x3fff <<  0)  /* Slow Clock Divider Mask */
+
+/*
+ * at91sam9x5 specific prototypes
+ */
+#ifndef __ASSEMBLY__
+unsigned int get_chip_id(void);
+unsigned int get_extension_chip_id(void);
+unsigned int has_emac1(void);
+unsigned int has_emac0(void);
+unsigned int has_lcdc(void);
+char *get_cpu_name(void);
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
new file mode 100644
index 0000000..d6ce6fa
--- /dev/null
+++ b/arch/arm/include/asm/arch-at91/at91sam9x5_matrix.h
@@ -0,0 +1,91 @@ 
+/*
+ * Matrix-centric header file for the AT91SAM9X5 family
+ *
+ *  Copyright (C) 2012 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9X5 preliminary datasheet.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __AT91SAM9X5_MATRIX_H__
+#define __AT91SAM9X5_MATRIX_H__
+
+#ifndef __ASSEMBLY__
+
+struct at91_matrix {
+	u32	mcfg[16];
+	u32	scfg[16];
+	u32	pras[16][2];
+	u32	mrcr;           /* 0x100 Master Remap Control */
+	u32	filler[7];
+	u32	ebicsa;
+	u32	filler4[47];
+	u32	wpmr;
+	u32	wpsr;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+#define AT91_MATRIX_ULBT_THIRTYTWO	(5 << 0)
+#define AT91_MATRIX_ULBT_SIXTYFOUR	(6 << 0)
+#define AT91_MATRIX_ULBT_128		(7 << 0)
+
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18
+
+#define AT91_MATRIX_M0PR_SHIFT          0
+#define AT91_MATRIX_M1PR_SHIFT          4
+#define AT91_MATRIX_M2PR_SHIFT          8
+#define AT91_MATRIX_M3PR_SHIFT          12
+#define AT91_MATRIX_M4PR_SHIFT          16
+#define AT91_MATRIX_M5PR_SHIFT          20
+#define AT91_MATRIX_M6PR_SHIFT          24
+#define AT91_MATRIX_M7PR_SHIFT          28
+
+#define AT91_MATRIX_M8PR_SHIFT          0  /* register B */
+#define AT91_MATRIX_M9PR_SHIFT          4  /* register B */
+#define AT91_MATRIX_M10PR_SHIFT         8  /* register B */
+#define AT91_MATRIX_M11PR_SHIFT         12 /* register B */
+
+#define AT91_MATRIX_RCB0                (1 << 0)
+#define AT91_MATRIX_RCB1                (1 << 1)
+#define AT91_MATRIX_RCB2                (1 << 2)
+#define AT91_MATRIX_RCB3                (1 << 3)
+#define AT91_MATRIX_RCB4                (1 << 4)
+#define AT91_MATRIX_RCB5                (1 << 5)
+#define AT91_MATRIX_RCB6                (1 << 6)
+#define AT91_MATRIX_RCB7                (1 << 7)
+#define AT91_MATRIX_RCB8                (1 << 8)
+#define AT91_MATRIX_RCB9                (1 << 9)
+#define AT91_MATRIX_RCB10               (1 << 10)
+
+#define AT91_MATRIX_EBI_CS1A_SMC                (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_SDRAMC             (1 << 1)
+#define AT91_MATRIX_EBI_CS3A_SMC                (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA     (1 << 3)
+#define AT91_MATRIX_EBI_DBPU_ON                 (0 << 8)
+#define AT91_MATRIX_EBI_DBPU_OFF                (1 << 8)
+#define AT91_MATRIX_EBI_DBPD_ON                 (0 << 9)
+#define AT91_MATRIX_EBI_DBPD_OFF                (1 << 9)
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V          (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V          (1 << 16)
+#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED        (0 << 17)
+#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL         (1 << 17)
+#define AT91_MATRIX_NFD0_ON_D0                  (0 << 24)
+#define AT91_MATRIX_NFD0_ON_D16                 (1 << 24)
+#define AT91_MATRIX_MP_OFF                      (0 << 25)
+#define AT91_MATRIX_MP_ON                       (1 << 25)
+
+#endif
diff --git a/arch/arm/include/asm/arch-at91/hardware.h b/arch/arm/include/asm/arch-at91/hardware.h
index 85c2889..4c4ee70 100644
--- a/arch/arm/include/asm/arch-at91/hardware.h
+++ b/arch/arm/include/asm/arch-at91/hardware.h
@@ -37,6 +37,8 @@ 
 # include <asm/arch/at91sam9rl.h>
 #elif defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45)
 # include <asm/arch/at91sam9g45.h>
+#elif defined(CONFIG_AT91SAM9X5)
+# include <asm/arch/at91sam9x5.h>
 #elif defined(CONFIG_AT91CAP9)
 # include <asm/arch/at91cap9.h>
 #elif defined(CONFIG_AT91X40)
diff --git a/board/atmel/at91sam9x5ek/Makefile b/board/atmel/at91sam9x5ek/Makefile
new file mode 100644
index 0000000..458d9a0
--- /dev/null
+++ b/board/atmel/at91sam9x5ek/Makefile
@@ -0,0 +1,52 @@ 
+#
+# (C) Copyright 2003-2008
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Stelian Pop <stelian@popies.net>
+# Lead Tech Design <www.leadtechdesign.com>
+#
+# (C) Copyright 2012
+# Bo Shen <voice.shen@atmel.com>
+# Atmel corporation <www.atmel.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y += at91sam9x5ek.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
new file mode 100644
index 0000000..ef84941
--- /dev/null
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -0,0 +1,299 @@ 
+/*
+ * Copyright (C) 2012 Atmel Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/at91sam9x5_matrix.h>
+#include <asm/arch/at91sam9_smc.h>
+#include <asm/arch/at91_common.h>
+#include <asm/arch/at91_pmc.h>
+#include <asm/arch/at91_rstc.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/clk.h>
+#include <lcd.h>
+#include <atmel_hlcdc.h>
+#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
+#include <net.h>
+#endif
+#include <netdev.h>
+#ifdef CONFIG_LCD_INFO
+#include <nand.h>
+#include <version.h>
+#endif
+#ifdef CONFIG_ATMEL_SPI
+#include <spi.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* ------------------------------------------------------------------------- */
+/*
+ * Miscelaneous platform dependent initialisations
+ */
+#ifdef CONFIG_CMD_NAND
+static void at91sam9x5ek_nand_hw_init(void)
+{
+	struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+	struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	unsigned long csa;
+
+	/* Enable CS3 */
+	csa = readl(&matrix->ebicsa);
+	csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
+	writel(csa, &matrix->ebicsa);
+
+	/* Configure SMC CS3 for NAND/SmartMedia */
+	writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
+		AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+		&smc->cs[3].setup);
+	writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) |
+		AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4),
+		&smc->cs[3].pulse);
+	writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
+		&smc->cs[3].cycle);
+	writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+		AT91_SMC_MODE_EXNW_DISABLE |
+#ifdef CONFIG_SYS_NAND_DBW_16
+		AT91_SMC_MODE_DBW_16 |
+#else /* CONFIG_SYS_NAND_DBW_8 */
+		AT91_SMC_MODE_DBW_8 |
+#endif
+		AT91_SMC_MODE_TDF_CYCLE(3),
+		&smc->cs[3].mode);
+
+	writel(1 << ATMEL_ID_PIOCD, &pmc->pcer);
+
+	/* Configure RDY/BSY */
+	at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+	/* Enable NandFlash */
+	at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+
+	at91_set_a_periph(AT91_PIO_PORTD, 0, 1);	/* NAND OE */
+	at91_set_a_periph(AT91_PIO_PORTD, 1, 1);	/* NAND WE */
+	at91_set_a_periph(AT91_PIO_PORTD, 2, 1);	/* NAND ALE */
+	at91_set_a_periph(AT91_PIO_PORTD, 3, 1);	/* NAND CLE */
+	at91_set_a_periph(AT91_PIO_PORTD, 6, 1);
+	at91_set_a_periph(AT91_PIO_PORTD, 7, 1);
+	at91_set_a_periph(AT91_PIO_PORTD, 8, 1);
+	at91_set_a_periph(AT91_PIO_PORTD, 9, 1);
+	at91_set_a_periph(AT91_PIO_PORTD, 10, 1);
+	at91_set_a_periph(AT91_PIO_PORTD, 11, 1);
+	at91_set_a_periph(AT91_PIO_PORTD, 12, 1);
+	at91_set_a_periph(AT91_PIO_PORTD, 13, 1);
+}
+#endif
+
+#ifdef CONFIG_RESET_PHY_R
+void reset_phy(void)
+{
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	int rc = 0;
+
+#ifdef CONFIG_MACB
+	if (has_emac0())
+		rc = macb_eth_initialize(0,
+			(void *)ATMEL_BASE_EMAC0, 0x00);
+	if (has_emac1())
+		rc = macb_eth_initialize(1,
+			(void *)ATMEL_BASE_EMAC1, 0x00);
+#endif
+	return rc;
+}
+
+#ifdef CONFIG_LCD
+vidinfo_t panel_info = {
+	.vl_col	= 800,
+	.vl_row = 480,
+	.vl_clk = 24000000,
+	.vl_sync = LCDC_LCDCFG5_HSPOL | LCDC_LCDCFG5_VSPOL,
+	.vl_bpix = LCD_BPP,
+	.vl_tft = 1,
+	.vl_clk_pol = 1,
+	.vl_hsync_len = 128,
+	.vl_left_margin = 64,
+	.vl_right_margin = 64,
+	.vl_vsync_len = 2,
+	.vl_upper_margin = 22,
+	.vl_lower_margin = 21,
+	.mmio = ATMEL_BASE_LCDC,
+};
+
+void lcd_enable(void)
+{
+	if (has_lcdc())
+		at91_set_a_periph(AT91_PIO_PORTC, 29, 1);	/* power up */
+}
+
+void lcd_disable(void)
+{
+	if (has_lcdc())
+		at91_set_a_periph(AT91_PIO_PORTC, 29, 0);	/* power down */
+}
+
+static void at91sam9x5ek_lcd_hw_init(void)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+	if (has_lcdc()) {
+		at91_set_a_periph(AT91_PIO_PORTC, 26, 0);	/* LCDPWM */
+		at91_set_a_periph(AT91_PIO_PORTC, 27, 0);	/* LCDVSYNC */
+		at91_set_a_periph(AT91_PIO_PORTC, 28, 0);	/* LCDHSYNC */
+		at91_set_a_periph(AT91_PIO_PORTC, 24, 0);	/* LCDDISP */
+		at91_set_a_periph(AT91_PIO_PORTC, 29, 0);	/* LCDDEN */
+		at91_set_a_periph(AT91_PIO_PORTC, 30, 0);	/* LCDPCK */
+
+		at91_set_a_periph(AT91_PIO_PORTC, 0, 0);	/* LCDD0 */
+		at91_set_a_periph(AT91_PIO_PORTC, 1, 0);	/* LCDD1 */
+		at91_set_a_periph(AT91_PIO_PORTC, 2, 0);	/* LCDD2 */
+		at91_set_a_periph(AT91_PIO_PORTC, 3, 0);	/* LCDD3 */
+		at91_set_a_periph(AT91_PIO_PORTC, 4, 0);	/* LCDD4 */
+		at91_set_a_periph(AT91_PIO_PORTC, 5, 0);	/* LCDD5 */
+		at91_set_a_periph(AT91_PIO_PORTC, 6, 0);	/* LCDD6 */
+		at91_set_a_periph(AT91_PIO_PORTC, 7, 0);	/* LCDD7 */
+		at91_set_a_periph(AT91_PIO_PORTC, 8, 0);	/* LCDD8 */
+		at91_set_a_periph(AT91_PIO_PORTC, 9, 0);	/* LCDD9 */
+		at91_set_a_periph(AT91_PIO_PORTC, 10, 0);	/* LCDD10 */
+		at91_set_a_periph(AT91_PIO_PORTC, 11, 0);	/* LCDD11 */
+		at91_set_a_periph(AT91_PIO_PORTC, 12, 0);	/* LCDD12 */
+		at91_set_a_periph(AT91_PIO_PORTC, 13, 0);	/* LCDD13 */
+		at91_set_a_periph(AT91_PIO_PORTC, 14, 0);	/* LCDD14 */
+		at91_set_a_periph(AT91_PIO_PORTC, 15, 0);	/* LCDD15 */
+		at91_set_a_periph(AT91_PIO_PORTC, 16, 0);	/* LCDD16 */
+		at91_set_a_periph(AT91_PIO_PORTC, 17, 0);	/* LCDD17 */
+		at91_set_a_periph(AT91_PIO_PORTC, 18, 0);	/* LCDD18 */
+		at91_set_a_periph(AT91_PIO_PORTC, 19, 0);	/* LCDD19 */
+		at91_set_a_periph(AT91_PIO_PORTC, 20, 0);	/* LCDD20 */
+		at91_set_a_periph(AT91_PIO_PORTC, 21, 0);	/* LCDD21 */
+		at91_set_a_periph(AT91_PIO_PORTC, 22, 0);	/* LCDD22 */
+		at91_set_a_periph(AT91_PIO_PORTC, 23, 0);	/* LCDD23 */
+
+		writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
+	}
+}
+
+#ifdef CONFIG_LCD_INFO
+void lcd_show_board_info(void)
+{
+	ulong dram_size, nand_size;
+	int i;
+	char temp[32];
+
+	if (has_lcdc()) {
+		lcd_printf("%s\n", U_BOOT_VERSION);
+		lcd_printf("(C) 2012 ATMEL Corp\n");
+		lcd_printf("at91support@atmel.com\n");
+		lcd_printf("%s CPU at %s MHz\n",
+			get_cpu_name(),
+			strmhz(temp, get_cpu_clk_rate()));
+
+		dram_size = 0;
+		for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
+			dram_size += gd->bd->bi_dram[i].size;
+		nand_size = 0;
+		for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
+			nand_size += nand_info[i].size;
+		lcd_printf("  %ld MB SDRAM, %ld MB NAND\n",
+			dram_size >> 20,
+			nand_size >> 20);
+	}
+}
+#endif /* CONFIG_LCD_INFO */
+#endif /* CONFIG_LCD */
+
+/* SPI chip select control */
+#ifdef CONFIG_ATMEL_SPI
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return bus == 0 && cs < 2;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	switch (slave->cs) {
+	case 1:
+		at91_set_pio_output(AT91_PIO_PORTA, 7, 0);
+		break;
+	case 0:
+	default:
+		at91_set_pio_output(AT91_PIO_PORTA, 14, 0);
+		break;
+	}
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	switch (slave->cs) {
+	case 1:
+		at91_set_pio_output(AT91_PIO_PORTA, 7, 1);
+		break;
+	case 0:
+	default:
+		at91_set_pio_output(AT91_PIO_PORTA, 14, 1);
+		break;
+	}
+}
+#endif /* CONFIG_ATMEL_SPI */
+
+int board_early_init_f(void)
+{
+	at91_seriald_hw_init();
+	return 0;
+}
+
+int board_init(void)
+{
+	/* arch number of AT91SAM9X5EK-Board */
+	gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9X5EK;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_CMD_NAND
+	at91sam9x5ek_nand_hw_init();
+#endif
+
+#ifdef CONFIG_ATMEL_SPI
+	at91_spi0_hw_init(1 << 0);
+	at91_spi0_hw_init(1 << 4);
+#endif
+
+#ifdef CONFIG_MACB
+	at91_macb_hw_init();
+#endif
+
+#ifdef CONFIG_LCD
+	at91sam9x5ek_lcd_hw_init();
+#endif
+	return 0;
+}
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
+					CONFIG_SYS_SDRAM_SIZE);
+	return 0;
+}
diff --git a/board/atmel/at91sam9x5ek/config.mk b/board/atmel/at91sam9x5ek/config.mk
new file mode 100644
index 0000000..6589a12
--- /dev/null
+++ b/board/atmel/at91sam9x5ek/config.mk
@@ -0,0 +1 @@ 
+CONFIG_SYS_TEXT_BASE = 0x26f00000
diff --git a/boards.cfg b/boards.cfg
index 9205070..c9bd1b3 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -89,6 +89,7 @@  at91sam9g20ek_nandflash      arm         arm926ejs   at91sam9260ek       atmel
 at91sam9m10g45ek_nandflash   arm         arm926ejs   at91sam9m10g45ek    atmel          at91        at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH
 at91sam9rlek_dataflash       arm         arm926ejs   at91sam9rlek        atmel          at91        at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
 at91sam9rlek_nandflash       arm         arm926ejs   at91sam9rlek        atmel          at91        at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
+at91sam9x5ek_nandflash       arm         arm926ejs   at91sam9x5ek        atmel          at91        at91sam9x5ek:AT91SAM9X5,SYS_USE_NANDFLASH
 at91sam9xeek_dataflash_cs0   arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS0
 at91sam9xeek_dataflash_cs1   arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
 at91sam9xeek_nandflash       arm         arm926ejs   at91sam9260ek       atmel          at91        at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 4578467..8f55cdc 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -471,7 +471,7 @@  static int macb_init(struct eth_device *netdev, bd_t *bd)
 #if	defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
 	defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
 	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
-	defined(CONFIG_AT91SAM9XE)
+	defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
 	macb_writel(macb, USRIO, MACB_BIT(RMII) | MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, 0);
@@ -480,7 +480,7 @@  static int macb_init(struct eth_device *netdev, bd_t *bd)
 #if	defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
 	defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
 	defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9M10G45) || \
-	defined(CONFIG_AT91SAM9XE)
+	defined(CONFIG_AT91SAM9XE) || defined(CONFIG_AT91SAM9X5)
 	macb_writel(macb, USRIO, MACB_BIT(CLKEN));
 #else
 	macb_writel(macb, USRIO, MACB_BIT(MII));
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
new file mode 100644
index 0000000..d8f9b5e
--- /dev/null
+++ b/include/configs/at91sam9x5ek.h
@@ -0,0 +1,184 @@ 
+/*
+ * Copyright (C) 2012 Atmel Corporation
+ *
+ * Configuation settings for the AT91SAM9X5EK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H__
+#define __CONFIG_H__
+
+#include <asm/hardware.h>
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK	32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK	12000000	/* 12 MHz crystal */
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_AT91SAM9X5EK
+#define CONFIG_AT91FAMILY
+
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+/* general purpose I/O */
+#define CONFIG_ATMEL_LEGACY		/* required until (g)pio is fixed */
+#define CONFIG_AT91_GPIO
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE	ATMEL_BASE_DBGU
+#define CONFIG_USART_ID		ATMEL_ID_SYS
+
+/* LCD */
+#define CONFIG_LCD
+#define LCD_BPP			LCD_COLOR16
+#define LCD_OUTPUT_BPP		24
+#define CONFIG_LCD_LOGO
+#undef LCD_TEST_PATTERN
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_HLCD
+#define CONFIG_ATMEL_LCD_RGB565
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+#define CONFIG_BOOTDELAY	3
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_LOADS
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+
+/* SDRAM */
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		0x20000000
+#define CONFIG_SYS_SDRAM_SIZE		0x08000000	/* 128 megs */
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+	(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+/* DataFlash */
+#ifdef CONFIG_ATMEL_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_ATMEL
+#define CONFIG_SYS_MAX_DATAFLASH_BANKS
+#endif
+
+/* no NOR flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* NAND flash */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_ATMEL
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_SYS_NAND_BASE		0x40000000
+#define CONFIG_SYS_NAND_DBW_8		1
+/* our ALE is AD21 */
+#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
+/* our CLE is AD22 */
+#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
+#define CONFIG_SYS_NAND_ENABLE_PIN	AT91_PIN_PD4
+#define CONFIG_SYS_NAND_READY_PIN	AT91_PIN_PD5
+
+#define CONFIG_MTD_DEVICE
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#endif
+
+/* Ethernet */
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
+#define CONFIG_NET_RETRY_COUNT		20
+#define CONFIG_MACB_SEARCH_PHY
+
+#define CONFIG_SYS_LOAD_ADDR		0x22000000	/* load address */
+
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		0x26e00000
+
+#ifdef CONFIG_SYS_USE_NANDFLASH
+/* bootstrap + u-boot + env + linux in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET		0xc0000
+#define CONFIG_ENV_OFFSET_REDUND	0x100000
+#define CONFIG_ENV_SIZE		0x20000		/* 1 sector = 128 kB */
+#define CONFIG_BOOTCOMMAND	"nand read " \
+				"0x22000000 0x200000 0x300000; " \
+				"bootm 0x22000000"
+#endif
+
+#define CONFIG_BOOTARGS		"mem=128M console=ttyS0,115200 " \
+				"mtdparts=atmel_nand:" \
+				"8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
+				"root=/dev/mtdblock1 rw " \
+				"rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"
+
+#define CONFIG_BAUDRATE		115200
+
+#define CONFIG_SYS_PROMPT	"U-Boot> "
+#define CONFIG_SYS_CBSIZE	256
+#define CONFIG_SYS_MAXARGS	16
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
+					+ 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN		(512 * 1024 + 0x1000)
+
+#ifdef CONFIG_USE_IRQ
+#error CONFIG_USE_IRQ not supported
+#endif
+
+#endif