Patchwork [1/2] Remove the autotool generated files

login
register
mail settings
Submitter Colin King
Date June 28, 2012, 10:04 a.m.
Message ID <1340877846-12681-2-git-send-email-colin.king@canonical.com>
Download mbox | patch
Permalink /patch/167841/
State Accepted
Headers show

Comments

Colin King - June 28, 2012, 10:04 a.m.
From: Colin Ian King <colin.king@canonical.com>

Tidy up by removing a load of files generated by autoreconf -ivf,
these have been around since the start of fwts and they are not
needed.

Just run: "autoreconf -ivf && ./configure && make" to build fwts

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 aclocal.m4        |  956 ----
 config.guess      | 1517 ------
 config.h.in       |  289 -
 config.sub        | 1760 -------
 configure         |15246 -----------------------------------------------------
 depcomp           |  630 ---
 install-sh        |  520 --
 libtool           |10065 -----------------------------------
 ltmain.sh         | 9642 ---------------------------------
 m4/libtool.m4     | 7851 ---------------------------
 m4/ltoptions.m4   |  369 --
 m4/ltsugar.m4     |  123 -
 m4/ltversion.m4   |   23 -
 m4/lt~obsolete.m4 |   98 -
 missing           |  376 --
 15 files changed, 49465 deletions(-)
 delete mode 100644 aclocal.m4
 delete mode 100755 config.guess
 delete mode 100644 config.h.in
 delete mode 100755 config.sub
 delete mode 100755 configure
 delete mode 100755 depcomp
 delete mode 100755 install-sh
 delete mode 100755 libtool
 delete mode 100755 ltmain.sh
 delete mode 100644 m4/libtool.m4
 delete mode 100644 m4/ltoptions.m4
 delete mode 100644 m4/ltsugar.m4
 delete mode 100644 m4/ltversion.m4
 delete mode 100644 m4/lt~obsolete.m4
 delete mode 100755 missing
Ivan Hu - July 2, 2012, 10:31 a.m.
On 06/28/2012 06:04 PM, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
>
> Tidy up by removing a load of files generated by autoreconf -ivf,
> these have been around since the start of fwts and they are not
> needed.
>
> Just run: "autoreconf -ivf && ./configure && make" to build fwts
>
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
>   aclocal.m4        |  956 ----
>   config.guess      | 1517 ------
>   config.h.in       |  289 -
>   config.sub        | 1760 -------
>   configure         |15246 -----------------------------------------------------
>   depcomp           |  630 ---
>   install-sh        |  520 --
>   libtool           |10065 -----------------------------------
>   ltmain.sh         | 9642 ---------------------------------
>   m4/libtool.m4     | 7851 ---------------------------
>   m4/ltoptions.m4   |  369 --
>   m4/ltsugar.m4     |  123 -
>   m4/ltversion.m4   |   23 -
>   m4/lt~obsolete.m4 |   98 -
>   missing           |  376 --
>   15 files changed, 49465 deletions(-)
>   delete mode 100644 aclocal.m4
>   delete mode 100755 config.guess
>   delete mode 100644 config.h.in
>   delete mode 100755 config.sub
>   delete mode 100755 configure
>   delete mode 100755 depcomp
>   delete mode 100755 install-sh
>   delete mode 100755 libtool
>   delete mode 100755 ltmain.sh
>   delete mode 100644 m4/libtool.m4
>   delete mode 100644 m4/ltoptions.m4
>   delete mode 100644 m4/ltsugar.m4
>   delete mode 100644 m4/ltversion.m4
>   delete mode 100644 m4/lt~obsolete.m4
>   delete mode 100755 missing
>
> diff --git a/aclocal.m4 b/aclocal.m4
> deleted file mode 100644
> index 665d753..0000000
> --- a/aclocal.m4
> +++ /dev/null
> @@ -1,956 +0,0 @@
> -# generated automatically by aclocal 1.11.1 -*- Autoconf -*-
> -
> -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
> -# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
> -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
> -# PARTICULAR PURPOSE.
> -
> -m4_ifndef([AC_AUTOCONF_VERSION],
> -  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
> -m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.68],,
> -[m4_warning([this file was generated for autoconf 2.68.
> -You have another version of autoconf.  It may work, but is not guaranteed to.
> -If you have problems, you may need to regenerate the build system entirely.
> -To do so, use the procedure documented by the package, typically `autoreconf'.])])
> -
> -# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# AM_AUTOMAKE_VERSION(VERSION)
> -# ----------------------------
> -# Automake X.Y traces this macro to ensure aclocal.m4 has been
> -# generated from the m4 files accompanying Automake X.Y.
> -# (This private macro should not be called outside this file.)
> -AC_DEFUN([AM_AUTOMAKE_VERSION],
> -[am__api_version='1.11'
> -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
> -dnl require some minimum version.  Point them to the right macro.
> -m4_if([$1], [1.11.1], [],
> -      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
> -])
> -
> -# _AM_AUTOCONF_VERSION(VERSION)
> -# -----------------------------
> -# aclocal traces this macro to find the Autoconf version.
> -# This is a private macro too.  Using m4_define simplifies
> -# the logic in aclocal, which can simply ignore this definition.
> -m4_define([_AM_AUTOCONF_VERSION], [])
> -
> -# AM_SET_CURRENT_AUTOMAKE_VERSION
> -# -------------------------------
> -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
> -# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
> -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
> -[AM_AUTOMAKE_VERSION([1.11.1])dnl
> -m4_ifndef([AC_AUTOCONF_VERSION],
> -  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
> -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
> -
> -# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
> -
> -# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
> -# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
> -# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
> -#
> -# Of course, Automake must honor this variable whenever it calls a
> -# tool from the auxiliary directory.  The problem is that $srcdir (and
> -# therefore $ac_aux_dir as well) can be either absolute or relative,
> -# depending on how configure is run.  This is pretty annoying, since
> -# it makes $ac_aux_dir quite unusable in subdirectories: in the top
> -# source directory, any form will work fine, but in subdirectories a
> -# relative path needs to be adjusted first.
> -#
> -# $ac_aux_dir/missing
> -#    fails when called from a subdirectory if $ac_aux_dir is relative
> -# $top_srcdir/$ac_aux_dir/missing
> -#    fails if $ac_aux_dir is absolute,
> -#    fails when called from a subdirectory in a VPATH build with
> -#          a relative $ac_aux_dir
> -#
> -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
> -# are both prefixed by $srcdir.  In an in-source build this is usually
> -# harmless because $srcdir is `.', but things will broke when you
> -# start a VPATH build or use an absolute $srcdir.
> -#
> -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
> -# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
> -#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
> -# and then we would define $MISSING as
> -#   MISSING="\${SHELL} $am_aux_dir/missing"
> -# This will work as long as MISSING is not called from configure, because
> -# unfortunately $(top_srcdir) has no meaning in configure.
> -# However there are other variables, like CC, which are often used in
> -# configure, and could therefore not use this "fixed" $ac_aux_dir.
> -#
> -# Another solution, used here, is to always expand $ac_aux_dir to an
> -# absolute PATH.  The drawback is that using absolute paths prevent a
> -# configured tree to be moved without reconfiguration.
> -
> -AC_DEFUN([AM_AUX_DIR_EXPAND],
> -[dnl Rely on autoconf to set up CDPATH properly.
> -AC_PREREQ([2.50])dnl
> -# expand $ac_aux_dir to an absolute path
> -am_aux_dir=`cd $ac_aux_dir && pwd`
> -])
> -
> -# AM_CONDITIONAL                                            -*- Autoconf -*-
> -
> -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
> -# Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# serial 9
> -
> -# AM_CONDITIONAL(NAME, SHELL-CONDITION)
> -# -------------------------------------
> -# Define a conditional.
> -AC_DEFUN([AM_CONDITIONAL],
> -[AC_PREREQ(2.52)dnl
> - ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
> -	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
> -AC_SUBST([$1_TRUE])dnl
> -AC_SUBST([$1_FALSE])dnl
> -_AM_SUBST_NOTMAKE([$1_TRUE])dnl
> -_AM_SUBST_NOTMAKE([$1_FALSE])dnl
> -m4_define([_AM_COND_VALUE_$1], [$2])dnl
> -if $2; then
> -  $1_TRUE=
> -  $1_FALSE='#'
> -else
> -  $1_TRUE='#'
> -  $1_FALSE=
> -fi
> -AC_CONFIG_COMMANDS_PRE(
> -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
> -  AC_MSG_ERROR([[conditional "$1" was never defined.
> -Usually this means the macro was only invoked conditionally.]])
> -fi])])
> -
> -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
> -# Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# serial 10
> -
> -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
> -# written in clear, in which case automake, when reading aclocal.m4,
> -# will think it sees a *use*, and therefore will trigger all it's
> -# C support machinery.  Also note that it means that autoscan, seeing
> -# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
> -
> -
> -# _AM_DEPENDENCIES(NAME)
> -# ----------------------
> -# See how the compiler implements dependency checking.
> -# NAME is "CC", "CXX", "GCJ", or "OBJC".
> -# We try a few techniques and use that to set a single cache variable.
> -#
> -# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
> -# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
> -# dependency, and given that the user is not expected to run this macro,
> -# just rely on AC_PROG_CC.
> -AC_DEFUN([_AM_DEPENDENCIES],
> -[AC_REQUIRE([AM_SET_DEPDIR])dnl
> -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
> -AC_REQUIRE([AM_MAKE_INCLUDE])dnl
> -AC_REQUIRE([AM_DEP_TRACK])dnl
> -
> -ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
> -       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
> -       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
> -       [$1], UPC,  [depcc="$UPC"  am_compiler_list=],
> -       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
> -                   [depcc="$$1"   am_compiler_list=])
> -
> -AC_CACHE_CHECK([dependency style of $depcc],
> -               [am_cv_$1_dependencies_compiler_type],
> -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
> -  # We make a subdir and do the tests there.  Otherwise we can end up
> -  # making bogus files that we don't know about and never remove.  For
> -  # instance it was reported that on HP-UX the gcc test will end up
> -  # making a dummy file named `D' -- because `-MD' means `put the output
> -  # in D'.
> -  mkdir conftest.dir
> -  # Copy depcomp to subdir because otherwise we won't find it if we're
> -  # using a relative directory.
> -  cp "$am_depcomp" conftest.dir
> -  cd conftest.dir
> -  # We will build objects and dependencies in a subdirectory because
> -  # it helps to detect inapplicable dependency modes.  For instance
> -  # both Tru64's cc and ICC support -MD to output dependencies as a
> -  # side effect of compilation, but ICC will put the dependencies in
> -  # the current directory while Tru64 will put them in the object
> -  # directory.
> -  mkdir sub
> -
> -  am_cv_$1_dependencies_compiler_type=none
> -  if test "$am_compiler_list" = ""; then
> -     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
> -  fi
> -  am__universal=false
> -  m4_case([$1], [CC],
> -    [case " $depcc " in #(
> -     *\ -arch\ *\ -arch\ *) am__universal=true ;;
> -     esac],
> -    [CXX],
> -    [case " $depcc " in #(
> -     *\ -arch\ *\ -arch\ *) am__universal=true ;;
> -     esac])
> -
> -  for depmode in $am_compiler_list; do
> -    # Setup a source with many dependencies, because some compilers
> -    # like to wrap large dependency lists on column 80 (with \), and
> -    # we should not choose a depcomp mode which is confused by this.
> -    #
> -    # We need to recreate these files for each test, as the compiler may
> -    # overwrite some of them when testing with obscure command lines.
> -    # This happens at least with the AIX C compiler.
> -    : > sub/conftest.c
> -    for i in 1 2 3 4 5 6; do
> -      echo '#include "conftst'$i'.h"' >> sub/conftest.c
> -      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
> -      # Solaris 8's {/usr,}/bin/sh.
> -      touch sub/conftst$i.h
> -    done
> -    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
> -
> -    # We check with `-c' and `-o' for the sake of the "dashmstdout"
> -    # mode.  It turns out that the SunPro C++ compiler does not properly
> -    # handle `-M -o', and we need to detect this.  Also, some Intel
> -    # versions had trouble with output in subdirs
> -    am__obj=sub/conftest.${OBJEXT-o}
> -    am__minus_obj="-o $am__obj"
> -    case $depmode in
> -    gcc)
> -      # This depmode causes a compiler race in universal mode.
> -      test "$am__universal" = false || continue
> -      ;;
> -    nosideeffect)
> -      # after this tag, mechanisms are not by side-effect, so they'll
> -      # only be used when explicitly requested
> -      if test "x$enable_dependency_tracking" = xyes; then
> -	continue
> -      else
> -	break
> -      fi
> -      ;;
> -    msvisualcpp | msvcmsys)
> -      # This compiler won't grok `-c -o', but also, the minuso test has
> -      # not run yet.  These depmodes are late enough in the game, and
> -      # so weak that their functioning should not be impacted.
> -      am__obj=conftest.${OBJEXT-o}
> -      am__minus_obj=
> -      ;;
> -    none) break ;;
> -    esac
> -    if depmode=$depmode \
> -       source=sub/conftest.c object=$am__obj \
> -       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
> -       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
> -         >/dev/null 2>conftest.err &&
> -       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
> -       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
> -       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
> -       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
> -      # icc doesn't choke on unknown options, it will just issue warnings
> -      # or remarks (even with -Werror).  So we grep stderr for any message
> -      # that says an option was ignored or not supported.
> -      # When given -MP, icc 7.0 and 7.1 complain thusly:
> -      #   icc: Command line warning: ignoring option '-M'; no argument required
> -      # The diagnosis changed in icc 8.0:
> -      #   icc: Command line remark: option '-MP' not supported
> -      if (grep 'ignoring option' conftest.err ||
> -          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
> -        am_cv_$1_dependencies_compiler_type=$depmode
> -        break
> -      fi
> -    fi
> -  done
> -
> -  cd ..
> -  rm -rf conftest.dir
> -else
> -  am_cv_$1_dependencies_compiler_type=none
> -fi
> -])
> -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
> -AM_CONDITIONAL([am__fastdep$1], [
> -  test "x$enable_dependency_tracking" != xno \
> -  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
> -])
> -
> -
> -# AM_SET_DEPDIR
> -# -------------
> -# Choose a directory name for dependency files.
> -# This macro is AC_REQUIREd in _AM_DEPENDENCIES
> -AC_DEFUN([AM_SET_DEPDIR],
> -[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
> -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
> -])
> -
> -
> -# AM_DEP_TRACK
> -# ------------
> -AC_DEFUN([AM_DEP_TRACK],
> -[AC_ARG_ENABLE(dependency-tracking,
> -[  --disable-dependency-tracking  speeds up one-time build
> -  --enable-dependency-tracking   do not reject slow dependency extractors])
> -if test "x$enable_dependency_tracking" != xno; then
> -  am_depcomp="$ac_aux_dir/depcomp"
> -  AMDEPBACKSLASH='\'
> -fi
> -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
> -AC_SUBST([AMDEPBACKSLASH])dnl
> -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
> -])
> -
> -# Generate code to set up dependency tracking.              -*- Autoconf -*-
> -
> -# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
> -# Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -#serial 5
> -
> -# _AM_OUTPUT_DEPENDENCY_COMMANDS
> -# ------------------------------
> -AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
> -[{
> -  # Autoconf 2.62 quotes --file arguments for eval, but not when files
> -  # are listed without --file.  Let's play safe and only enable the eval
> -  # if we detect the quoting.
> -  case $CONFIG_FILES in
> -  *\'*) eval set x "$CONFIG_FILES" ;;
> -  *)   set x $CONFIG_FILES ;;
> -  esac
> -  shift
> -  for mf
> -  do
> -    # Strip MF so we end up with the name of the file.
> -    mf=`echo "$mf" | sed -e 's/:.*$//'`
> -    # Check whether this is an Automake generated Makefile or not.
> -    # We used to match only the files named `Makefile.in', but
> -    # some people rename them; so instead we look at the file content.
> -    # Grep'ing the first line is not enough: some people post-process
> -    # each Makefile.in and add a new line on top of each file to say so.
> -    # Grep'ing the whole file is not good either: AIX grep has a line
> -    # limit of 2048, but all sed's we know have understand at least 4000.
> -    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
> -      dirpart=`AS_DIRNAME("$mf")`
> -    else
> -      continue
> -    fi
> -    # Extract the definition of DEPDIR, am__include, and am__quote
> -    # from the Makefile without running `make'.
> -    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
> -    test -z "$DEPDIR" && continue
> -    am__include=`sed -n 's/^am__include = //p' < "$mf"`
> -    test -z "am__include" && continue
> -    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
> -    # When using ansi2knr, U may be empty or an underscore; expand it
> -    U=`sed -n 's/^U = //p' < "$mf"`
> -    # Find all dependency output files, they are included files with
> -    # $(DEPDIR) in their names.  We invoke sed twice because it is the
> -    # simplest approach to changing $(DEPDIR) to its actual value in the
> -    # expansion.
> -    for file in `sed -n "
> -      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
> -	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
> -      # Make sure the directory exists.
> -      test -f "$dirpart/$file" && continue
> -      fdir=`AS_DIRNAME(["$file"])`
> -      AS_MKDIR_P([$dirpart/$fdir])
> -      # echo "creating $dirpart/$file"
> -      echo '# dummy' > "$dirpart/$file"
> -    done
> -  done
> -}
> -])# _AM_OUTPUT_DEPENDENCY_COMMANDS
> -
> -
> -# AM_OUTPUT_DEPENDENCY_COMMANDS
> -# -----------------------------
> -# This macro should only be invoked once -- use via AC_REQUIRE.
> -#
> -# This code is only required when automatic dependency tracking
> -# is enabled.  FIXME.  This creates each `.P' file that we will
> -# need in order to bootstrap the dependency handling code.
> -AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
> -[AC_CONFIG_COMMANDS([depfiles],
> -     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
> -     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
> -])
> -
> -# Do all the work for Automake.                             -*- Autoconf -*-
> -
> -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
> -# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# serial 16
> -
> -# This macro actually does too much.  Some checks are only needed if
> -# your package does certain things.  But this isn't really a big deal.
> -
> -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
> -# AM_INIT_AUTOMAKE([OPTIONS])
> -# -----------------------------------------------
> -# The call with PACKAGE and VERSION arguments is the old style
> -# call (pre autoconf-2.50), which is being phased out.  PACKAGE
> -# and VERSION should now be passed to AC_INIT and removed from
> -# the call to AM_INIT_AUTOMAKE.
> -# We support both call styles for the transition.  After
> -# the next Automake release, Autoconf can make the AC_INIT
> -# arguments mandatory, and then we can depend on a new Autoconf
> -# release and drop the old call support.
> -AC_DEFUN([AM_INIT_AUTOMAKE],
> -[AC_PREREQ([2.62])dnl
> -dnl Autoconf wants to disallow AM_ names.  We explicitly allow
> -dnl the ones we care about.
> -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
> -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
> -AC_REQUIRE([AC_PROG_INSTALL])dnl
> -if test "`cd $srcdir && pwd`" != "`pwd`"; then
> -  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
> -  # is not polluted with repeated "-I."
> -  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
> -  # test to see if srcdir already configured
> -  if test -f $srcdir/config.status; then
> -    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
> -  fi
> -fi
> -
> -# test whether we have cygpath
> -if test -z "$CYGPATH_W"; then
> -  if (cygpath --version) >/dev/null 2>/dev/null; then
> -    CYGPATH_W='cygpath -w'
> -  else
> -    CYGPATH_W=echo
> -  fi
> -fi
> -AC_SUBST([CYGPATH_W])
> -
> -# Define the identity of the package.
> -dnl Distinguish between old-style and new-style calls.
> -m4_ifval([$2],
> -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
> - AC_SUBST([PACKAGE], [$1])dnl
> - AC_SUBST([VERSION], [$2])],
> -[_AM_SET_OPTIONS([$1])dnl
> -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
> -m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
> -  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
> - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
> - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
> -
> -_AM_IF_OPTION([no-define],,
> -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
> - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
> -
> -# Some tools Automake needs.
> -AC_REQUIRE([AM_SANITY_CHECK])dnl
> -AC_REQUIRE([AC_ARG_PROGRAM])dnl
> -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
> -AM_MISSING_PROG(AUTOCONF, autoconf)
> -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
> -AM_MISSING_PROG(AUTOHEADER, autoheader)
> -AM_MISSING_PROG(MAKEINFO, makeinfo)
> -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
> -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
> -AC_REQUIRE([AM_PROG_MKDIR_P])dnl
> -# We need awk for the "check" target.  The system "awk" is bad on
> -# some platforms.
> -AC_REQUIRE([AC_PROG_AWK])dnl
> -AC_REQUIRE([AC_PROG_MAKE_SET])dnl
> -AC_REQUIRE([AM_SET_LEADING_DOT])dnl
> -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
> -	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
> -			     [_AM_PROG_TAR([v7])])])
> -_AM_IF_OPTION([no-dependencies],,
> -[AC_PROVIDE_IFELSE([AC_PROG_CC],
> -		  [_AM_DEPENDENCIES(CC)],
> -		  [define([AC_PROG_CC],
> -			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
> -AC_PROVIDE_IFELSE([AC_PROG_CXX],
> -		  [_AM_DEPENDENCIES(CXX)],
> -		  [define([AC_PROG_CXX],
> -			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
> -AC_PROVIDE_IFELSE([AC_PROG_OBJC],
> -		  [_AM_DEPENDENCIES(OBJC)],
> -		  [define([AC_PROG_OBJC],
> -			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
> -])
> -_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
> -dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
> -dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
> -dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
> -AC_CONFIG_COMMANDS_PRE(dnl
> -[m4_provide_if([_AM_COMPILER_EXEEXT],
> -  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
> -])
> -
> -dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
> -dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
> -dnl mangled by Autoconf and run in a shell conditional statement.
> -m4_define([_AC_COMPILER_EXEEXT],
> -m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
> -
> -
> -# When config.status generates a header, we must update the stamp-h file.
> -# This file resides in the same directory as the config header
> -# that is generated.  The stamp files are numbered to have different names.
> -
> -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
> -# loop where config.status creates the headers, so we can generate
> -# our stamp files there.
> -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
> -[# Compute $1's index in $config_headers.
> -_am_arg=$1
> -_am_stamp_count=1
> -for _am_header in $config_headers :; do
> -  case $_am_header in
> -    $_am_arg | $_am_arg:* )
> -      break ;;
> -    * )
> -      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
> -  esac
> -done
> -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
> -
> -# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# AM_PROG_INSTALL_SH
> -# ------------------
> -# Define $install_sh.
> -AC_DEFUN([AM_PROG_INSTALL_SH],
> -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
> -if test x"${install_sh}" != xset; then
> -  case $am_aux_dir in
> -  *\ * | *\	*)
> -    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
> -  *)
> -    install_sh="\${SHELL} $am_aux_dir/install-sh"
> -  esac
> -fi
> -AC_SUBST(install_sh)])
> -
> -# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# serial 2
> -
> -# Check whether the underlying file-system supports filenames
> -# with a leading dot.  For instance MS-DOS doesn't.
> -AC_DEFUN([AM_SET_LEADING_DOT],
> -[rm -rf .tst 2>/dev/null
> -mkdir .tst 2>/dev/null
> -if test -d .tst; then
> -  am__leading_dot=.
> -else
> -  am__leading_dot=_
> -fi
> -rmdir .tst 2>/dev/null
> -AC_SUBST([am__leading_dot])])
> -
> -# Check to see how 'make' treats includes.	            -*- Autoconf -*-
> -
> -# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# serial 4
> -
> -# AM_MAKE_INCLUDE()
> -# -----------------
> -# Check to see how make treats includes.
> -AC_DEFUN([AM_MAKE_INCLUDE],
> -[am_make=${MAKE-make}
> -cat > confinc << 'END'
> -am__doit:
> -	@echo this is the am__doit target
> -.PHONY: am__doit
> -END
> -# If we don't find an include directive, just comment out the code.
> -AC_MSG_CHECKING([for style of include used by $am_make])
> -am__include="#"
> -am__quote=
> -_am_result=none
> -# First try GNU make style include.
> -echo "include confinc" > confmf
> -# Ignore all kinds of additional output from `make'.
> -case `$am_make -s -f confmf 2> /dev/null` in #(
> -*the\ am__doit\ target*)
> -  am__include=include
> -  am__quote=
> -  _am_result=GNU
> -  ;;
> -esac
> -# Now try BSD make style include.
> -if test "$am__include" = "#"; then
> -   echo '.include "confinc"' > confmf
> -   case `$am_make -s -f confmf 2> /dev/null` in #(
> -   *the\ am__doit\ target*)
> -     am__include=.include
> -     am__quote="\""
> -     _am_result=BSD
> -     ;;
> -   esac
> -fi
> -AC_SUBST([am__include])
> -AC_SUBST([am__quote])
> -AC_MSG_RESULT([$_am_result])
> -rm -f confinc confmf
> -])
> -
> -# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
> -
> -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
> -# Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# serial 6
> -
> -# AM_MISSING_PROG(NAME, PROGRAM)
> -# ------------------------------
> -AC_DEFUN([AM_MISSING_PROG],
> -[AC_REQUIRE([AM_MISSING_HAS_RUN])
> -$1=${$1-"${am_missing_run}$2"}
> -AC_SUBST($1)])
> -
> -
> -# AM_MISSING_HAS_RUN
> -# ------------------
> -# Define MISSING if not defined so far and test if it supports --run.
> -# If it does, set am_missing_run to use it, otherwise, to nothing.
> -AC_DEFUN([AM_MISSING_HAS_RUN],
> -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
> -AC_REQUIRE_AUX_FILE([missing])dnl
> -if test x"${MISSING+set}" != xset; then
> -  case $am_aux_dir in
> -  *\ * | *\	*)
> -    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
> -  *)
> -    MISSING="\${SHELL} $am_aux_dir/missing" ;;
> -  esac
> -fi
> -# Use eval to expand $SHELL
> -if eval "$MISSING --run true"; then
> -  am_missing_run="$MISSING --run "
> -else
> -  am_missing_run=
> -  AC_MSG_WARN([`missing' script is too old or missing])
> -fi
> -])
> -
> -# Copyright (C) 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# AM_PROG_MKDIR_P
> -# ---------------
> -# Check for `mkdir -p'.
> -AC_DEFUN([AM_PROG_MKDIR_P],
> -[AC_PREREQ([2.60])dnl
> -AC_REQUIRE([AC_PROG_MKDIR_P])dnl
> -dnl Automake 1.8 to 1.9.6 used to define mkdir_p.  We now use MKDIR_P,
> -dnl while keeping a definition of mkdir_p for backward compatibility.
> -dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
> -dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
> -dnl Makefile.ins that do not define MKDIR_P, so we do our own
> -dnl adjustment using top_builddir (which is defined more often than
> -dnl MKDIR_P).
> -AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
> -case $mkdir_p in
> -  [[\\/$]]* | ?:[[\\/]]*) ;;
> -  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
> -esac
> -])
> -
> -# Helper functions for option handling.                     -*- Autoconf -*-
> -
> -# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# serial 4
> -
> -# _AM_MANGLE_OPTION(NAME)
> -# -----------------------
> -AC_DEFUN([_AM_MANGLE_OPTION],
> -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
> -
> -# _AM_SET_OPTION(NAME)
> -# ------------------------------
> -# Set option NAME.  Presently that only means defining a flag for this option.
> -AC_DEFUN([_AM_SET_OPTION],
> -[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
> -
> -# _AM_SET_OPTIONS(OPTIONS)
> -# ----------------------------------
> -# OPTIONS is a space-separated list of Automake options.
> -AC_DEFUN([_AM_SET_OPTIONS],
> -[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
> -
> -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
> -# -------------------------------------------
> -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
> -AC_DEFUN([_AM_IF_OPTION],
> -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
> -
> -# Check to make sure that the build environment is sane.    -*- Autoconf -*-
> -
> -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
> -# Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# serial 5
> -
> -# AM_SANITY_CHECK
> -# ---------------
> -AC_DEFUN([AM_SANITY_CHECK],
> -[AC_MSG_CHECKING([whether build environment is sane])
> -# Just in case
> -sleep 1
> -echo timestamp > conftest.file
> -# Reject unsafe characters in $srcdir or the absolute working directory
> -# name.  Accept space and tab only in the latter.
> -am_lf='
> -'
> -case `pwd` in
> -  *[[\\\"\#\$\&\'\`$am_lf]]*)
> -    AC_MSG_ERROR([unsafe absolute working directory name]);;
> -esac
> -case $srcdir in
> -  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
> -    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
> -esac
> -
> -# Do `set' in a subshell so we don't clobber the current shell's
> -# arguments.  Must try -L first in case configure is actually a
> -# symlink; some systems play weird games with the mod time of symlinks
> -# (eg FreeBSD returns the mod time of the symlink's containing
> -# directory).
> -if (
> -   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
> -   if test "$[*]" = "X"; then
> -      # -L didn't work.
> -      set X `ls -t "$srcdir/configure" conftest.file`
> -   fi
> -   rm -f conftest.file
> -   if test "$[*]" != "X $srcdir/configure conftest.file" \
> -      && test "$[*]" != "X conftest.file $srcdir/configure"; then
> -
> -      # If neither matched, then we have a broken ls.  This can happen
> -      # if, for instance, CONFIG_SHELL is bash and it inherits a
> -      # broken ls alias from the environment.  This has actually
> -      # happened.  Such a system could not be considered "sane".
> -      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
> -alias in your environment])
> -   fi
> -
> -   test "$[2]" = conftest.file
> -   )
> -then
> -   # Ok.
> -   :
> -else
> -   AC_MSG_ERROR([newly created file is older than distributed files!
> -Check your system clock])
> -fi
> -AC_MSG_RESULT(yes)])
> -
> -# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# AM_PROG_INSTALL_STRIP
> -# ---------------------
> -# One issue with vendor `install' (even GNU) is that you can't
> -# specify the program used to strip binaries.  This is especially
> -# annoying in cross-compiling environments, where the build's strip
> -# is unlikely to handle the host's binaries.
> -# Fortunately install-sh will honor a STRIPPROG variable, so we
> -# always use install-sh in `make install-strip', and initialize
> -# STRIPPROG with the value of the STRIP variable (set by the user).
> -AC_DEFUN([AM_PROG_INSTALL_STRIP],
> -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
> -# Installed binaries are usually stripped using `strip' when the user
> -# run `make install-strip'.  However `strip' might not be the right
> -# tool to use in cross-compilation environments, therefore Automake
> -# will honor the `STRIP' environment variable to overrule this program.
> -dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
> -if test "$cross_compiling" != no; then
> -  AC_CHECK_TOOL([STRIP], [strip], :)
> -fi
> -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
> -AC_SUBST([INSTALL_STRIP_PROGRAM])])
> -
> -# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# serial 2
> -
> -# _AM_SUBST_NOTMAKE(VARIABLE)
> -# ---------------------------
> -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
> -# This macro is traced by Automake.
> -AC_DEFUN([_AM_SUBST_NOTMAKE])
> -
> -# AM_SUBST_NOTMAKE(VARIABLE)
> -# ---------------------------
> -# Public sister of _AM_SUBST_NOTMAKE.
> -AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
> -
> -# Check how to create a tarball.                            -*- Autoconf -*-
> -
> -# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
> -#
> -# This file is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# serial 2
> -
> -# _AM_PROG_TAR(FORMAT)
> -# --------------------
> -# Check how to create a tarball in format FORMAT.
> -# FORMAT should be one of `v7', `ustar', or `pax'.
> -#
> -# Substitute a variable $(am__tar) that is a command
> -# writing to stdout a FORMAT-tarball containing the directory
> -# $tardir.
> -#     tardir=directory && $(am__tar) > result.tar
> -#
> -# Substitute a variable $(am__untar) that extract such
> -# a tarball read from stdin.
> -#     $(am__untar) < result.tar
> -AC_DEFUN([_AM_PROG_TAR],
> -[# Always define AMTAR for backward compatibility.
> -AM_MISSING_PROG([AMTAR], [tar])
> -m4_if([$1], [v7],
> -     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
> -     [m4_case([$1], [ustar],, [pax],,
> -              [m4_fatal([Unknown tar format])])
> -AC_MSG_CHECKING([how to create a $1 tar archive])
> -# Loop over all known methods to create a tar archive until one works.
> -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
> -_am_tools=${am_cv_prog_tar_$1-$_am_tools}
> -# Do not fold the above two line into one, because Tru64 sh and
> -# Solaris sh will not grok spaces in the rhs of `-'.
> -for _am_tool in $_am_tools
> -do
> -  case $_am_tool in
> -  gnutar)
> -    for _am_tar in tar gnutar gtar;
> -    do
> -      AM_RUN_LOG([$_am_tar --version]) && break
> -    done
> -    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
> -    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
> -    am__untar="$_am_tar -xf -"
> -    ;;
> -  plaintar)
> -    # Must skip GNU tar: if it does not support --format= it doesn't create
> -    # ustar tarball either.
> -    (tar --version) >/dev/null 2>&1 && continue
> -    am__tar='tar chf - "$$tardir"'
> -    am__tar_='tar chf - "$tardir"'
> -    am__untar='tar xf -'
> -    ;;
> -  pax)
> -    am__tar='pax -L -x $1 -w "$$tardir"'
> -    am__tar_='pax -L -x $1 -w "$tardir"'
> -    am__untar='pax -r'
> -    ;;
> -  cpio)
> -    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
> -    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
> -    am__untar='cpio -i -H $1 -d'
> -    ;;
> -  none)
> -    am__tar=false
> -    am__tar_=false
> -    am__untar=false
> -    ;;
> -  esac
> -
> -  # If the value was cached, stop now.  We just wanted to have am__tar
> -  # and am__untar set.
> -  test -n "${am_cv_prog_tar_$1}" && break
> -
> -  # tar/untar a dummy directory, and stop if the command works
> -  rm -rf conftest.dir
> -  mkdir conftest.dir
> -  echo GrepMe > conftest.dir/file
> -  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
> -  rm -rf conftest.dir
> -  if test -s conftest.tar; then
> -    AM_RUN_LOG([$am__untar <conftest.tar])
> -    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
> -  fi
> -done
> -rm -rf conftest.dir
> -
> -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
> -AC_MSG_RESULT([$am_cv_prog_tar_$1])])
> -AC_SUBST([am__tar])
> -AC_SUBST([am__untar])
> -]) # _AM_PROG_TAR
> -
> -m4_include([m4/libtool.m4])
> -m4_include([m4/ltoptions.m4])
> -m4_include([m4/ltsugar.m4])
> -m4_include([m4/ltversion.m4])
> -m4_include([m4/lt~obsolete.m4])
> diff --git a/config.guess b/config.guess
> deleted file mode 100755
> index 40eaed4..0000000
> --- a/config.guess
> +++ /dev/null
> @@ -1,1517 +0,0 @@
> -#! /bin/sh
> -# Attempt to guess a canonical system name.
> -#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
> -#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
> -#   2011 Free Software Foundation, Inc.
> -
> -timestamp='2011-05-11'
> -
> -# This file is free software; you can redistribute it and/or modify it
> -# under the terms of the GNU General Public License as published by
> -# the Free Software Foundation; either version 2 of the License, or
> -# (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful, but
> -# WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> -# General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
> -# 02110-1301, USA.
> -#
> -# As a special exception to the GNU General Public License, if you
> -# distribute this file as part of a program that contains a
> -# configuration script generated by Autoconf, you may include it under
> -# the same distribution terms that you use for the rest of that program.
> -
> -
> -# Originally written by Per Bothner.  Please send patches (context
> -# diff format) to <config-patches@gnu.org> and include a ChangeLog
> -# entry.
> -#
> -# This script attempts to guess a canonical system name similar to
> -# config.sub.  If it succeeds, it prints the system name on stdout, and
> -# exits with 0.  Otherwise, it exits with 1.
> -#
> -# You can get the latest version of this script from:
> -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
> -
> -me=`echo "$0" | sed -e 's,.*/,,'`
> -
> -usage="\
> -Usage: $0 [OPTION]
> -
> -Output the configuration name of the system \`$me' is run on.
> -
> -Operation modes:
> -  -h, --help         print this help, then exit
> -  -t, --time-stamp   print date of last modification, then exit
> -  -v, --version      print version number, then exit
> -
> -Report bugs and patches to <config-patches@gnu.org>."
> -
> -version="\
> -GNU config.guess ($timestamp)
> -
> -Originally written by Per Bothner.
> -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
> -2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
> -Software Foundation, Inc.
> -
> -This is free software; see the source for copying conditions.  There is NO
> -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
> -
> -help="
> -Try \`$me --help' for more information."
> -
> -# Parse command line
> -while test $# -gt 0 ; do
> -  case $1 in
> -    --time-stamp | --time* | -t )
> -       echo "$timestamp" ; exit ;;
> -    --version | -v )
> -       echo "$version" ; exit ;;
> -    --help | --h* | -h )
> -       echo "$usage"; exit ;;
> -    -- )     # Stop option processing
> -       shift; break ;;
> -    - )	# Use stdin as input.
> -       break ;;
> -    -* )
> -       echo "$me: invalid option $1$help" >&2
> -       exit 1 ;;
> -    * )
> -       break ;;
> -  esac
> -done
> -
> -if test $# != 0; then
> -  echo "$me: too many arguments$help" >&2
> -  exit 1
> -fi
> -
> -trap 'exit 1' 1 2 15
> -
> -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
> -# compiler to aid in system detection is discouraged as it requires
> -# temporary files to be created and, as you can see below, it is a
> -# headache to deal with in a portable fashion.
> -
> -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
> -# use `HOST_CC' if defined, but it is deprecated.
> -
> -# Portable tmp directory creation inspired by the Autoconf team.
> -
> -set_cc_for_build='
> -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
> -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
> -: ${TMPDIR=/tmp} ;
> - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
> - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
> - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
> - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
> -dummy=$tmp/dummy ;
> -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
> -case $CC_FOR_BUILD,$HOST_CC,$CC in
> - ,,)    echo "int x;" > $dummy.c ;
> -	for c in cc gcc c89 c99 ; do
> -	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
> -	     CC_FOR_BUILD="$c"; break ;
> -	  fi ;
> -	done ;
> -	if test x"$CC_FOR_BUILD" = x ; then
> -	  CC_FOR_BUILD=no_compiler_found ;
> -	fi
> -	;;
> - ,,*)   CC_FOR_BUILD=$CC ;;
> - ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
> -esac ; set_cc_for_build= ;'
> -
> -# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
> -# (ghazi@noc.rutgers.edu 1994-08-24)
> -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
> -	PATH=$PATH:/.attbin ; export PATH
> -fi
> -
> -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
> -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
> -UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
> -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
> -
> -# Note: order is significant - the case branches are not exclusive.
> -
> -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
> -    *:NetBSD:*:*)
> -	# NetBSD (nbsd) targets should (where applicable) match one or
> -	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
> -	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
> -	# switched to ELF, *-*-netbsd* would select the old
> -	# object file format.  This provides both forward
> -	# compatibility and a consistent mechanism for selecting the
> -	# object file format.
> -	#
> -	# Note: NetBSD doesn't particularly care about the vendor
> -	# portion of the name.  We always set it to "unknown".
> -	sysctl="sysctl -n hw.machine_arch"
> -	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
> -	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
> -	case "${UNAME_MACHINE_ARCH}" in
> -	    armeb) machine=armeb-unknown ;;
> -	    arm*) machine=arm-unknown ;;
> -	    sh3el) machine=shl-unknown ;;
> -	    sh3eb) machine=sh-unknown ;;
> -	    sh5el) machine=sh5le-unknown ;;
> -	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
> -	esac
> -	# The Operating System including object format, if it has switched
> -	# to ELF recently, or will in the future.
> -	case "${UNAME_MACHINE_ARCH}" in
> -	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
> -		eval $set_cc_for_build
> -		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
> -			| grep -q __ELF__
> -		then
> -		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
> -		    # Return netbsd for either.  FIX?
> -		    os=netbsd
> -		else
> -		    os=netbsdelf
> -		fi
> -		;;
> -	    *)
> -		os=netbsd
> -		;;
> -	esac
> -	# The OS release
> -	# Debian GNU/NetBSD machines have a different userland, and
> -	# thus, need a distinct triplet. However, they do not need
> -	# kernel version information, so it can be replaced with a
> -	# suitable tag, in the style of linux-gnu.
> -	case "${UNAME_VERSION}" in
> -	    Debian*)
> -		release='-gnu'
> -		;;
> -	    *)
> -		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
> -		;;
> -	esac
> -	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
> -	# contains redundant information, the shorter form:
> -	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
> -	echo "${machine}-${os}${release}"
> -	exit ;;
> -    *:OpenBSD:*:*)
> -	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
> -	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
> -	exit ;;
> -    *:ekkoBSD:*:*)
> -	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
> -	exit ;;
> -    *:SolidBSD:*:*)
> -	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
> -	exit ;;
> -    macppc:MirBSD:*:*)
> -	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
> -	exit ;;
> -    *:MirBSD:*:*)
> -	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
> -	exit ;;
> -    alpha:OSF1:*:*)
> -	case $UNAME_RELEASE in
> -	*4.0)
> -		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
> -		;;
> -	*5.*)
> -		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
> -		;;
> -	esac
> -	# According to Compaq, /usr/sbin/psrinfo has been available on
> -	# OSF/1 and Tru64 systems produced since 1995.  I hope that
> -	# covers most systems running today.  This code pipes the CPU
> -	# types through head -n 1, so we only detect the type of CPU 0.
> -	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
> -	case "$ALPHA_CPU_TYPE" in
> -	    "EV4 (21064)")
> -		UNAME_MACHINE="alpha" ;;
> -	    "EV4.5 (21064)")
> -		UNAME_MACHINE="alpha" ;;
> -	    "LCA4 (21066/21068)")
> -		UNAME_MACHINE="alpha" ;;
> -	    "EV5 (21164)")
> -		UNAME_MACHINE="alphaev5" ;;
> -	    "EV5.6 (21164A)")
> -		UNAME_MACHINE="alphaev56" ;;
> -	    "EV5.6 (21164PC)")
> -		UNAME_MACHINE="alphapca56" ;;
> -	    "EV5.7 (21164PC)")
> -		UNAME_MACHINE="alphapca57" ;;
> -	    "EV6 (21264)")
> -		UNAME_MACHINE="alphaev6" ;;
> -	    "EV6.7 (21264A)")
> -		UNAME_MACHINE="alphaev67" ;;
> -	    "EV6.8CB (21264C)")
> -		UNAME_MACHINE="alphaev68" ;;
> -	    "EV6.8AL (21264B)")
> -		UNAME_MACHINE="alphaev68" ;;
> -	    "EV6.8CX (21264D)")
> -		UNAME_MACHINE="alphaev68" ;;
> -	    "EV6.9A (21264/EV69A)")
> -		UNAME_MACHINE="alphaev69" ;;
> -	    "EV7 (21364)")
> -		UNAME_MACHINE="alphaev7" ;;
> -	    "EV7.9 (21364A)")
> -		UNAME_MACHINE="alphaev79" ;;
> -	esac
> -	# A Pn.n version is a patched version.
> -	# A Vn.n version is a released version.
> -	# A Tn.n version is a released field test version.
> -	# A Xn.n version is an unreleased experimental baselevel.
> -	# 1.2 uses "1.2" for uname -r.
> -	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
> -	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
> -	exitcode=$?
> -	trap '' 0
> -	exit $exitcode ;;
> -    Alpha\ *:Windows_NT*:*)
> -	# How do we know it's Interix rather than the generic POSIX subsystem?
> -	# Should we change UNAME_MACHINE based on the output of uname instead
> -	# of the specific Alpha model?
> -	echo alpha-pc-interix
> -	exit ;;
> -    21064:Windows_NT:50:3)
> -	echo alpha-dec-winnt3.5
> -	exit ;;
> -    Amiga*:UNIX_System_V:4.0:*)
> -	echo m68k-unknown-sysv4
> -	exit ;;
> -    *:[Aa]miga[Oo][Ss]:*:*)
> -	echo ${UNAME_MACHINE}-unknown-amigaos
> -	exit ;;
> -    *:[Mm]orph[Oo][Ss]:*:*)
> -	echo ${UNAME_MACHINE}-unknown-morphos
> -	exit ;;
> -    *:OS/390:*:*)
> -	echo i370-ibm-openedition
> -	exit ;;
> -    *:z/VM:*:*)
> -	echo s390-ibm-zvmoe
> -	exit ;;
> -    *:OS400:*:*)
> -	echo powerpc-ibm-os400
> -	exit ;;
> -    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
> -	echo arm-acorn-riscix${UNAME_RELEASE}
> -	exit ;;
> -    arm:riscos:*:*|arm:RISCOS:*:*)
> -	echo arm-unknown-riscos
> -	exit ;;
> -    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
> -	echo hppa1.1-hitachi-hiuxmpp
> -	exit ;;
> -    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
> -	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
> -	if test "`(/bin/universe) 2>/dev/null`" = att ; then
> -		echo pyramid-pyramid-sysv3
> -	else
> -		echo pyramid-pyramid-bsd
> -	fi
> -	exit ;;
> -    NILE*:*:*:dcosx)
> -	echo pyramid-pyramid-svr4
> -	exit ;;
> -    DRS?6000:unix:4.0:6*)
> -	echo sparc-icl-nx6
> -	exit ;;
> -    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
> -	case `/usr/bin/uname -p` in
> -	    sparc) echo sparc-icl-nx7; exit ;;
> -	esac ;;
> -    s390x:SunOS:*:*)
> -	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
> -	exit ;;
> -    sun4H:SunOS:5.*:*)
> -	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
> -	exit ;;
> -    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
> -	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
> -	exit ;;
> -    i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
> -	echo i386-pc-auroraux${UNAME_RELEASE}
> -	exit ;;
> -    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
> -	eval $set_cc_for_build
> -	SUN_ARCH="i386"
> -	# If there is a compiler, see if it is configured for 64-bit objects.
> -	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
> -	# This test works for both compilers.
> -	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
> -	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
> -		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
> -		grep IS_64BIT_ARCH >/dev/null
> -	    then
> -		SUN_ARCH="x86_64"
> -	    fi
> -	fi
> -	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
> -	exit ;;
> -    sun4*:SunOS:6*:*)
> -	# According to config.sub, this is the proper way to canonicalize
> -	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
> -	# it's likely to be more like Solaris than SunOS4.
> -	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
> -	exit ;;
> -    sun4*:SunOS:*:*)
> -	case "`/usr/bin/arch -k`" in
> -	    Series*|S4*)
> -		UNAME_RELEASE=`uname -v`
> -		;;
> -	esac
> -	# Japanese Language versions have a version number like `4.1.3-JL'.
> -	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
> -	exit ;;
> -    sun3*:SunOS:*:*)
> -	echo m68k-sun-sunos${UNAME_RELEASE}
> -	exit ;;
> -    sun*:*:4.2BSD:*)
> -	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
> -	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
> -	case "`/bin/arch`" in
> -	    sun3)
> -		echo m68k-sun-sunos${UNAME_RELEASE}
> -		;;
> -	    sun4)
> -		echo sparc-sun-sunos${UNAME_RELEASE}
> -		;;
> -	esac
> -	exit ;;
> -    aushp:SunOS:*:*)
> -	echo sparc-auspex-sunos${UNAME_RELEASE}
> -	exit ;;
> -    # The situation for MiNT is a little confusing.  The machine name
> -    # can be virtually everything (everything which is not
> -    # "atarist" or "atariste" at least should have a processor
> -    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
> -    # to the lowercase version "mint" (or "freemint").  Finally
> -    # the system name "TOS" denotes a system which is actually not
> -    # MiNT.  But MiNT is downward compatible to TOS, so this should
> -    # be no problem.
> -    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
> -	echo m68k-atari-mint${UNAME_RELEASE}
> -	exit ;;
> -    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
> -	echo m68k-atari-mint${UNAME_RELEASE}
> -	exit ;;
> -    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
> -	echo m68k-atari-mint${UNAME_RELEASE}
> -	exit ;;
> -    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
> -	echo m68k-milan-mint${UNAME_RELEASE}
> -	exit ;;
> -    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
> -	echo m68k-hades-mint${UNAME_RELEASE}
> -	exit ;;
> -    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
> -	echo m68k-unknown-mint${UNAME_RELEASE}
> -	exit ;;
> -    m68k:machten:*:*)
> -	echo m68k-apple-machten${UNAME_RELEASE}
> -	exit ;;
> -    powerpc:machten:*:*)
> -	echo powerpc-apple-machten${UNAME_RELEASE}
> -	exit ;;
> -    RISC*:Mach:*:*)
> -	echo mips-dec-mach_bsd4.3
> -	exit ;;
> -    RISC*:ULTRIX:*:*)
> -	echo mips-dec-ultrix${UNAME_RELEASE}
> -	exit ;;
> -    VAX*:ULTRIX*:*:*)
> -	echo vax-dec-ultrix${UNAME_RELEASE}
> -	exit ;;
> -    2020:CLIX:*:* | 2430:CLIX:*:*)
> -	echo clipper-intergraph-clix${UNAME_RELEASE}
> -	exit ;;
> -    mips:*:*:UMIPS | mips:*:*:RISCos)
> -	eval $set_cc_for_build
> -	sed 's/^	//' << EOF >$dummy.c
> -#ifdef __cplusplus
> -#include <stdio.h>  /* for printf() prototype */
> -	int main (int argc, char *argv[]) {
> -#else
> -	int main (argc, argv) int argc; char *argv[]; {
> -#endif
> -	#if defined (host_mips) && defined (MIPSEB)
> -	#if defined (SYSTYPE_SYSV)
> -	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
> -	#endif
> -	#if defined (SYSTYPE_SVR4)
> -	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
> -	#endif
> -	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
> -	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
> -	#endif
> -	#endif
> -	  exit (-1);
> -	}
> -EOF
> -	$CC_FOR_BUILD -o $dummy $dummy.c &&
> -	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
> -	  SYSTEM_NAME=`$dummy $dummyarg` &&
> -	    { echo "$SYSTEM_NAME"; exit; }
> -	echo mips-mips-riscos${UNAME_RELEASE}
> -	exit ;;
> -    Motorola:PowerMAX_OS:*:*)
> -	echo powerpc-motorola-powermax
> -	exit ;;
> -    Motorola:*:4.3:PL8-*)
> -	echo powerpc-harris-powermax
> -	exit ;;
> -    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
> -	echo powerpc-harris-powermax
> -	exit ;;
> -    Night_Hawk:Power_UNIX:*:*)
> -	echo powerpc-harris-powerunix
> -	exit ;;
> -    m88k:CX/UX:7*:*)
> -	echo m88k-harris-cxux7
> -	exit ;;
> -    m88k:*:4*:R4*)
> -	echo m88k-motorola-sysv4
> -	exit ;;
> -    m88k:*:3*:R3*)
> -	echo m88k-motorola-sysv3
> -	exit ;;
> -    AViiON:dgux:*:*)
> -	# DG/UX returns AViiON for all architectures
> -	UNAME_PROCESSOR=`/usr/bin/uname -p`
> -	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
> -	then
> -	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
> -	       [ ${TARGET_BINARY_INTERFACE}x = x ]
> -	    then
> -		echo m88k-dg-dgux${UNAME_RELEASE}
> -	    else
> -		echo m88k-dg-dguxbcs${UNAME_RELEASE}
> -	    fi
> -	else
> -	    echo i586-dg-dgux${UNAME_RELEASE}
> -	fi
> -	exit ;;
> -    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
> -	echo m88k-dolphin-sysv3
> -	exit ;;
> -    M88*:*:R3*:*)
> -	# Delta 88k system running SVR3
> -	echo m88k-motorola-sysv3
> -	exit ;;
> -    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
> -	echo m88k-tektronix-sysv3
> -	exit ;;
> -    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
> -	echo m68k-tektronix-bsd
> -	exit ;;
> -    *:IRIX*:*:*)
> -	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
> -	exit ;;
> -    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
> -	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
> -	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
> -    i*86:AIX:*:*)
> -	echo i386-ibm-aix
> -	exit ;;
> -    ia64:AIX:*:*)
> -	if [ -x /usr/bin/oslevel ] ; then
> -		IBM_REV=`/usr/bin/oslevel`
> -	else
> -		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
> -	fi
> -	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
> -	exit ;;
> -    *:AIX:2:3)
> -	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
> -		eval $set_cc_for_build
> -		sed 's/^		//' << EOF >$dummy.c
> -		#include <sys/systemcfg.h>
> -
> -		main()
> -			{
> -			if (!__power_pc())
> -				exit(1);
> -			puts("powerpc-ibm-aix3.2.5");
> -			exit(0);
> -			}
> -EOF
> -		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
> -		then
> -			echo "$SYSTEM_NAME"
> -		else
> -			echo rs6000-ibm-aix3.2.5
> -		fi
> -	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
> -		echo rs6000-ibm-aix3.2.4
> -	else
> -		echo rs6000-ibm-aix3.2
> -	fi
> -	exit ;;
> -    *:AIX:*:[4567])
> -	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
> -	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
> -		IBM_ARCH=rs6000
> -	else
> -		IBM_ARCH=powerpc
> -	fi
> -	if [ -x /usr/bin/oslevel ] ; then
> -		IBM_REV=`/usr/bin/oslevel`
> -	else
> -		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
> -	fi
> -	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
> -	exit ;;
> -    *:AIX:*:*)
> -	echo rs6000-ibm-aix
> -	exit ;;
> -    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
> -	echo romp-ibm-bsd4.4
> -	exit ;;
> -    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
> -	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
> -	exit ;;                             # report: romp-ibm BSD 4.3
> -    *:BOSX:*:*)
> -	echo rs6000-bull-bosx
> -	exit ;;
> -    DPX/2?00:B.O.S.:*:*)
> -	echo m68k-bull-sysv3
> -	exit ;;
> -    9000/[34]??:4.3bsd:1.*:*)
> -	echo m68k-hp-bsd
> -	exit ;;
> -    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
> -	echo m68k-hp-bsd4.4
> -	exit ;;
> -    9000/[34678]??:HP-UX:*:*)
> -	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
> -	case "${UNAME_MACHINE}" in
> -	    9000/31? )            HP_ARCH=m68000 ;;
> -	    9000/[34]?? )         HP_ARCH=m68k ;;
> -	    9000/[678][0-9][0-9])
> -		if [ -x /usr/bin/getconf ]; then
> -		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
> -		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
> -		    case "${sc_cpu_version}" in
> -		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
> -		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
> -		      532)                      # CPU_PA_RISC2_0
> -			case "${sc_kernel_bits}" in
> -			  32) HP_ARCH="hppa2.0n" ;;
> -			  64) HP_ARCH="hppa2.0w" ;;
> -			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
> -			esac ;;
> -		    esac
> -		fi
> -		if [ "${HP_ARCH}" = "" ]; then
> -		    eval $set_cc_for_build
> -		    sed 's/^		//' << EOF >$dummy.c
> -
> -		#define _HPUX_SOURCE
> -		#include <stdlib.h>
> -		#include <unistd.h>
> -
> -		int main ()
> -		{
> -		#if defined(_SC_KERNEL_BITS)
> -		    long bits = sysconf(_SC_KERNEL_BITS);
> -		#endif
> -		    long cpu  = sysconf (_SC_CPU_VERSION);
> -
> -		    switch (cpu)
> -			{
> -			case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
> -			case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
> -			case CPU_PA_RISC2_0:
> -		#if defined(_SC_KERNEL_BITS)
> -			    switch (bits)
> -				{
> -				case 64: puts ("hppa2.0w"); break;
> -				case 32: puts ("hppa2.0n"); break;
> -				default: puts ("hppa2.0"); break;
> -				} break;
> -		#else  /* !defined(_SC_KERNEL_BITS) */
> -			    puts ("hppa2.0"); break;
> -		#endif
> -			default: puts ("hppa1.0"); break;
> -			}
> -		    exit (0);
> -		}
> -EOF
> -		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
> -		    test -z "$HP_ARCH" && HP_ARCH=hppa
> -		fi ;;
> -	esac
> -	if [ ${HP_ARCH} = "hppa2.0w" ]
> -	then
> -	    eval $set_cc_for_build
> -
> -	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
> -	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
> -	    # generating 64-bit code.  GNU and HP use different nomenclature:
> -	    #
> -	    # $ CC_FOR_BUILD=cc ./config.guess
> -	    # => hppa2.0w-hp-hpux11.23
> -	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
> -	    # => hppa64-hp-hpux11.23
> -
> -	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
> -		grep -q __LP64__
> -	    then
> -		HP_ARCH="hppa2.0w"
> -	    else
> -		HP_ARCH="hppa64"
> -	    fi
> -	fi
> -	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
> -	exit ;;
> -    ia64:HP-UX:*:*)
> -	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
> -	echo ia64-hp-hpux${HPUX_REV}
> -	exit ;;
> -    3050*:HI-UX:*:*)
> -	eval $set_cc_for_build
> -	sed 's/^	//' << EOF >$dummy.c
> -	#include <unistd.h>
> -	int
> -	main ()
> -	{
> -	  long cpu = sysconf (_SC_CPU_VERSION);
> -	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
> -	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
> -	     results, however.  */
> -	  if (CPU_IS_PA_RISC (cpu))
> -	    {
> -	      switch (cpu)
> -		{
> -		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
> -		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
> -		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
> -		  default: puts ("hppa-hitachi-hiuxwe2"); break;
> -		}
> -	    }
> -	  else if (CPU_IS_HP_MC68K (cpu))
> -	    puts ("m68k-hitachi-hiuxwe2");
> -	  else puts ("unknown-hitachi-hiuxwe2");
> -	  exit (0);
> -	}
> -EOF
> -	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
> -		{ echo "$SYSTEM_NAME"; exit; }
> -	echo unknown-hitachi-hiuxwe2
> -	exit ;;
> -    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
> -	echo hppa1.1-hp-bsd
> -	exit ;;
> -    9000/8??:4.3bsd:*:*)
> -	echo hppa1.0-hp-bsd
> -	exit ;;
> -    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
> -	echo hppa1.0-hp-mpeix
> -	exit ;;
> -    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
> -	echo hppa1.1-hp-osf
> -	exit ;;
> -    hp8??:OSF1:*:*)
> -	echo hppa1.0-hp-osf
> -	exit ;;
> -    i*86:OSF1:*:*)
> -	if [ -x /usr/sbin/sysversion ] ; then
> -	    echo ${UNAME_MACHINE}-unknown-osf1mk
> -	else
> -	    echo ${UNAME_MACHINE}-unknown-osf1
> -	fi
> -	exit ;;
> -    parisc*:Lites*:*:*)
> -	echo hppa1.1-hp-lites
> -	exit ;;
> -    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
> -	echo c1-convex-bsd
> -	exit ;;
> -    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
> -	if getsysinfo -f scalar_acc
> -	then echo c32-convex-bsd
> -	else echo c2-convex-bsd
> -	fi
> -	exit ;;
> -    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
> -	echo c34-convex-bsd
> -	exit ;;
> -    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
> -	echo c38-convex-bsd
> -	exit ;;
> -    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
> -	echo c4-convex-bsd
> -	exit ;;
> -    CRAY*Y-MP:*:*:*)
> -	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
> -	exit ;;
> -    CRAY*[A-Z]90:*:*:*)
> -	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
> -	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
> -	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
> -	      -e 's/\.[^.]*$/.X/'
> -	exit ;;
> -    CRAY*TS:*:*:*)
> -	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
> -	exit ;;
> -    CRAY*T3E:*:*:*)
> -	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
> -	exit ;;
> -    CRAY*SV1:*:*:*)
> -	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
> -	exit ;;
> -    *:UNICOS/mp:*:*)
> -	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
> -	exit ;;
> -    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
> -	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
> -	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
> -	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
> -	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
> -	exit ;;
> -    5000:UNIX_System_V:4.*:*)
> -	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
> -	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
> -	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
> -	exit ;;
> -    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
> -	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
> -	exit ;;
> -    sparc*:BSD/OS:*:*)
> -	echo sparc-unknown-bsdi${UNAME_RELEASE}
> -	exit ;;
> -    *:BSD/OS:*:*)
> -	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
> -	exit ;;
> -    *:FreeBSD:*:*)
> -	case ${UNAME_MACHINE} in
> -	    pc98)
> -		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
> -	    amd64)
> -		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
> -	    *)
> -		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
> -	esac
> -	exit ;;
> -    i*:CYGWIN*:*)
> -	echo ${UNAME_MACHINE}-pc-cygwin
> -	exit ;;
> -    *:MINGW*:*)
> -	echo ${UNAME_MACHINE}-pc-mingw32
> -	exit ;;
> -    i*:windows32*:*)
> -	# uname -m includes "-pc" on this system.
> -	echo ${UNAME_MACHINE}-mingw32
> -	exit ;;
> -    i*:PW*:*)
> -	echo ${UNAME_MACHINE}-pc-pw32
> -	exit ;;
> -    *:Interix*:*)
> -	case ${UNAME_MACHINE} in
> -	    x86)
> -		echo i586-pc-interix${UNAME_RELEASE}
> -		exit ;;
> -	    authenticamd | genuineintel | EM64T)
> -		echo x86_64-unknown-interix${UNAME_RELEASE}
> -		exit ;;
> -	    IA64)
> -		echo ia64-unknown-interix${UNAME_RELEASE}
> -		exit ;;
> -	esac ;;
> -    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
> -	echo i${UNAME_MACHINE}-pc-mks
> -	exit ;;
> -    8664:Windows_NT:*)
> -	echo x86_64-pc-mks
> -	exit ;;
> -    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
> -	# How do we know it's Interix rather than the generic POSIX subsystem?
> -	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
> -	# UNAME_MACHINE based on the output of uname instead of i386?
> -	echo i586-pc-interix
> -	exit ;;
> -    i*:UWIN*:*)
> -	echo ${UNAME_MACHINE}-pc-uwin
> -	exit ;;
> -    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
> -	echo x86_64-unknown-cygwin
> -	exit ;;
> -    p*:CYGWIN*:*)
> -	echo powerpcle-unknown-cygwin
> -	exit ;;
> -    prep*:SunOS:5.*:*)
> -	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
> -	exit ;;
> -    *:GNU:*:*)
> -	# the GNU system
> -	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
> -	exit ;;
> -    *:GNU/*:*:*)
> -	# other systems with GNU libc and userland
> -	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
> -	exit ;;
> -    i*86:Minix:*:*)
> -	echo ${UNAME_MACHINE}-pc-minix
> -	exit ;;
> -    alpha:Linux:*:*)
> -	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
> -	  EV5)   UNAME_MACHINE=alphaev5 ;;
> -	  EV56)  UNAME_MACHINE=alphaev56 ;;
> -	  PCA56) UNAME_MACHINE=alphapca56 ;;
> -	  PCA57) UNAME_MACHINE=alphapca56 ;;
> -	  EV6)   UNAME_MACHINE=alphaev6 ;;
> -	  EV67)  UNAME_MACHINE=alphaev67 ;;
> -	  EV68*) UNAME_MACHINE=alphaev68 ;;
> -	esac
> -	objdump --private-headers /bin/sh | grep -q ld.so.1
> -	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
> -	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
> -	exit ;;
> -    arm*:Linux:*:*)
> -	eval $set_cc_for_build
> -	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
> -	    | grep -q __ARM_EABI__
> -	then
> -	    echo ${UNAME_MACHINE}-unknown-linux-gnu
> -	else
> -	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
> -		| grep -q __ARM_PCS_VFP
> -	    then
> -		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
> -	    else
> -		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
> -	    fi
> -	fi
> -	exit ;;
> -    avr32*:Linux:*:*)
> -	echo ${UNAME_MACHINE}-unknown-linux-gnu
> -	exit ;;
> -    cris:Linux:*:*)
> -	echo cris-axis-linux-gnu
> -	exit ;;
> -    crisv32:Linux:*:*)
> -	echo crisv32-axis-linux-gnu
> -	exit ;;
> -    frv:Linux:*:*)
> -	echo frv-unknown-linux-gnu
> -	exit ;;
> -    i*86:Linux:*:*)
> -	LIBC=gnu
> -	eval $set_cc_for_build
> -	sed 's/^	//' << EOF >$dummy.c
> -	#ifdef __dietlibc__
> -	LIBC=dietlibc
> -	#endif
> -EOF
> -	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
> -	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
> -	exit ;;
> -    ia64:Linux:*:*)
> -	echo ${UNAME_MACHINE}-unknown-linux-gnu
> -	exit ;;
> -    m32r*:Linux:*:*)
> -	echo ${UNAME_MACHINE}-unknown-linux-gnu
> -	exit ;;
> -    m68*:Linux:*:*)
> -	echo ${UNAME_MACHINE}-unknown-linux-gnu
> -	exit ;;
> -    mips:Linux:*:* | mips64:Linux:*:*)
> -	eval $set_cc_for_build
> -	sed 's/^	//' << EOF >$dummy.c
> -	#undef CPU
> -	#undef ${UNAME_MACHINE}
> -	#undef ${UNAME_MACHINE}el
> -	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
> -	CPU=${UNAME_MACHINE}el
> -	#else
> -	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
> -	CPU=${UNAME_MACHINE}
> -	#else
> -	CPU=
> -	#endif
> -	#endif
> -EOF
> -	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
> -	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
> -	;;
> -    or32:Linux:*:*)
> -	echo or32-unknown-linux-gnu
> -	exit ;;
> -    padre:Linux:*:*)
> -	echo sparc-unknown-linux-gnu
> -	exit ;;
> -    parisc64:Linux:*:* | hppa64:Linux:*:*)
> -	echo hppa64-unknown-linux-gnu
> -	exit ;;
> -    parisc:Linux:*:* | hppa:Linux:*:*)
> -	# Look for CPU level
> -	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
> -	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
> -	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
> -	  *)    echo hppa-unknown-linux-gnu ;;
> -	esac
> -	exit ;;
> -    ppc64:Linux:*:*)
> -	echo powerpc64-unknown-linux-gnu
> -	exit ;;
> -    ppc:Linux:*:*)
> -	echo powerpc-unknown-linux-gnu
> -	exit ;;
> -    s390:Linux:*:* | s390x:Linux:*:*)
> -	echo ${UNAME_MACHINE}-ibm-linux
> -	exit ;;
> -    sh64*:Linux:*:*)
> -	echo ${UNAME_MACHINE}-unknown-linux-gnu
> -	exit ;;
> -    sh*:Linux:*:*)
> -	echo ${UNAME_MACHINE}-unknown-linux-gnu
> -	exit ;;
> -    sparc:Linux:*:* | sparc64:Linux:*:*)
> -	echo ${UNAME_MACHINE}-unknown-linux-gnu
> -	exit ;;
> -    tile*:Linux:*:*)
> -	echo ${UNAME_MACHINE}-tilera-linux-gnu
> -	exit ;;
> -    vax:Linux:*:*)
> -	echo ${UNAME_MACHINE}-dec-linux-gnu
> -	exit ;;
> -    x86_64:Linux:*:*)
> -	echo x86_64-unknown-linux-gnu
> -	exit ;;
> -    xtensa*:Linux:*:*)
> -	echo ${UNAME_MACHINE}-unknown-linux-gnu
> -	exit ;;
> -    i*86:DYNIX/ptx:4*:*)
> -	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
> -	# earlier versions are messed up and put the nodename in both
> -	# sysname and nodename.
> -	echo i386-sequent-sysv4
> -	exit ;;
> -    i*86:UNIX_SV:4.2MP:2.*)
> -	# Unixware is an offshoot of SVR4, but it has its own version
> -	# number series starting with 2...
> -	# I am not positive that other SVR4 systems won't match this,
> -	# I just have to hope.  -- rms.
> -	# Use sysv4.2uw... so that sysv4* matches it.
> -	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
> -	exit ;;
> -    i*86:OS/2:*:*)
> -	# If we were able to find `uname', then EMX Unix compatibility
> -	# is probably installed.
> -	echo ${UNAME_MACHINE}-pc-os2-emx
> -	exit ;;
> -    i*86:XTS-300:*:STOP)
> -	echo ${UNAME_MACHINE}-unknown-stop
> -	exit ;;
> -    i*86:atheos:*:*)
> -	echo ${UNAME_MACHINE}-unknown-atheos
> -	exit ;;
> -    i*86:syllable:*:*)
> -	echo ${UNAME_MACHINE}-pc-syllable
> -	exit ;;
> -    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
> -	echo i386-unknown-lynxos${UNAME_RELEASE}
> -	exit ;;
> -    i*86:*DOS:*:*)
> -	echo ${UNAME_MACHINE}-pc-msdosdjgpp
> -	exit ;;
> -    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
> -	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
> -	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
> -		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
> -	else
> -		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
> -	fi
> -	exit ;;
> -    i*86:*:5:[678]*)
> -	# UnixWare 7.x, OpenUNIX and OpenServer 6.
> -	case `/bin/uname -X | grep "^Machine"` in
> -	    *486*)	     UNAME_MACHINE=i486 ;;
> -	    *Pentium)	     UNAME_MACHINE=i586 ;;
> -	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
> -	esac
> -	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
> -	exit ;;
> -    i*86:*:3.2:*)
> -	if test -f /usr/options/cb.name; then
> -		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
> -		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
> -	elif /bin/uname -X 2>/dev/null >/dev/null ; then
> -		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
> -		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
> -		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
> -			&& UNAME_MACHINE=i586
> -		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
> -			&& UNAME_MACHINE=i686
> -		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
> -			&& UNAME_MACHINE=i686
> -		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
> -	else
> -		echo ${UNAME_MACHINE}-pc-sysv32
> -	fi
> -	exit ;;
> -    pc:*:*:*)
> -	# Left here for compatibility:
> -	# uname -m prints for DJGPP always 'pc', but it prints nothing about
> -	# the processor, so we play safe by assuming i586.
> -	# Note: whatever this is, it MUST be the same as what config.sub
> -	# prints for the "djgpp" host, or else GDB configury will decide that
> -	# this is a cross-build.
> -	echo i586-pc-msdosdjgpp
> -	exit ;;
> -    Intel:Mach:3*:*)
> -	echo i386-pc-mach3
> -	exit ;;
> -    paragon:*:*:*)
> -	echo i860-intel-osf1
> -	exit ;;
> -    i860:*:4.*:*) # i860-SVR4
> -	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
> -	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
> -	else # Add other i860-SVR4 vendors below as they are discovered.
> -	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
> -	fi
> -	exit ;;
> -    mini*:CTIX:SYS*5:*)
> -	# "miniframe"
> -	echo m68010-convergent-sysv
> -	exit ;;
> -    mc68k:UNIX:SYSTEM5:3.51m)
> -	echo m68k-convergent-sysv
> -	exit ;;
> -    M680?0:D-NIX:5.3:*)
> -	echo m68k-diab-dnix
> -	exit ;;
> -    M68*:*:R3V[5678]*:*)
> -	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
> -    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
> -	OS_REL=''
> -	test -r /etc/.relid \
> -	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
> -	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
> -	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
> -	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
> -	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
> -    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
> -	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
> -	  && { echo i486-ncr-sysv4; exit; } ;;
> -    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
> -	OS_REL='.3'
> -	test -r /etc/.relid \
> -	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
> -	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
> -	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
> -	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
> -	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
> -	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
> -	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
> -    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
> -	echo m68k-unknown-lynxos${UNAME_RELEASE}
> -	exit ;;
> -    mc68030:UNIX_System_V:4.*:*)
> -	echo m68k-atari-sysv4
> -	exit ;;
> -    TSUNAMI:LynxOS:2.*:*)
> -	echo sparc-unknown-lynxos${UNAME_RELEASE}
> -	exit ;;
> -    rs6000:LynxOS:2.*:*)
> -	echo rs6000-unknown-lynxos${UNAME_RELEASE}
> -	exit ;;
> -    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
> -	echo powerpc-unknown-lynxos${UNAME_RELEASE}
> -	exit ;;
> -    SM[BE]S:UNIX_SV:*:*)
> -	echo mips-dde-sysv${UNAME_RELEASE}
> -	exit ;;
> -    RM*:ReliantUNIX-*:*:*)
> -	echo mips-sni-sysv4
> -	exit ;;
> -    RM*:SINIX-*:*:*)
> -	echo mips-sni-sysv4
> -	exit ;;
> -    *:SINIX-*:*:*)
> -	if uname -p 2>/dev/null >/dev/null ; then
> -		UNAME_MACHINE=`(uname -p) 2>/dev/null`
> -		echo ${UNAME_MACHINE}-sni-sysv4
> -	else
> -		echo ns32k-sni-sysv
> -	fi
> -	exit ;;
> -    PENTIUM:*:4.0*:*)	# Unisys `ClearPath HMP IX 4000' SVR4/MP effort
> -			# says <Richard.M.Bartel@ccMail.Census.GOV>
> -	echo i586-unisys-sysv4
> -	exit ;;
> -    *:UNIX_System_V:4*:FTX*)
> -	# From Gerald Hewes <hewes@openmarket.com>.
> -	# How about differentiating between stratus architectures? -djm
> -	echo hppa1.1-stratus-sysv4
> -	exit ;;
> -    *:*:*:FTX*)
> -	# From seanf@swdc.stratus.com.
> -	echo i860-stratus-sysv4
> -	exit ;;
> -    i*86:VOS:*:*)
> -	# From Paul.Green@stratus.com.
> -	echo ${UNAME_MACHINE}-stratus-vos
> -	exit ;;
> -    *:VOS:*:*)
> -	# From Paul.Green@stratus.com.
> -	echo hppa1.1-stratus-vos
> -	exit ;;
> -    mc68*:A/UX:*:*)
> -	echo m68k-apple-aux${UNAME_RELEASE}
> -	exit ;;
> -    news*:NEWS-OS:6*:*)
> -	echo mips-sony-newsos6
> -	exit ;;
> -    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
> -	if [ -d /usr/nec ]; then
> -		echo mips-nec-sysv${UNAME_RELEASE}
> -	else
> -		echo mips-unknown-sysv${UNAME_RELEASE}
> -	fi
> -	exit ;;
> -    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
> -	echo powerpc-be-beos
> -	exit ;;
> -    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
> -	echo powerpc-apple-beos
> -	exit ;;
> -    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
> -	echo i586-pc-beos
> -	exit ;;
> -    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
> -	echo i586-pc-haiku
> -	exit ;;
> -    SX-4:SUPER-UX:*:*)
> -	echo sx4-nec-superux${UNAME_RELEASE}
> -	exit ;;
> -    SX-5:SUPER-UX:*:*)
> -	echo sx5-nec-superux${UNAME_RELEASE}
> -	exit ;;
> -    SX-6:SUPER-UX:*:*)
> -	echo sx6-nec-superux${UNAME_RELEASE}
> -	exit ;;
> -    SX-7:SUPER-UX:*:*)
> -	echo sx7-nec-superux${UNAME_RELEASE}
> -	exit ;;
> -    SX-8:SUPER-UX:*:*)
> -	echo sx8-nec-superux${UNAME_RELEASE}
> -	exit ;;
> -    SX-8R:SUPER-UX:*:*)
> -	echo sx8r-nec-superux${UNAME_RELEASE}
> -	exit ;;
> -    Power*:Rhapsody:*:*)
> -	echo powerpc-apple-rhapsody${UNAME_RELEASE}
> -	exit ;;
> -    *:Rhapsody:*:*)
> -	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
> -	exit ;;
> -    *:Darwin:*:*)
> -	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
> -	case $UNAME_PROCESSOR in
> -	    i386)
> -		eval $set_cc_for_build
> -		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
> -		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
> -		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
> -		      grep IS_64BIT_ARCH >/dev/null
> -		  then
> -		      UNAME_PROCESSOR="x86_64"
> -		  fi
> -		fi ;;
> -	    unknown) UNAME_PROCESSOR=powerpc ;;
> -	esac
> -	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
> -	exit ;;
> -    *:procnto*:*:* | *:QNX:[0123456789]*:*)
> -	UNAME_PROCESSOR=`uname -p`
> -	if test "$UNAME_PROCESSOR" = "x86"; then
> -		UNAME_PROCESSOR=i386
> -		UNAME_MACHINE=pc
> -	fi
> -	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
> -	exit ;;
> -    *:QNX:*:4*)
> -	echo i386-pc-qnx
> -	exit ;;
> -    NEO-?:NONSTOP_KERNEL:*:*)
> -	echo neo-tandem-nsk${UNAME_RELEASE}
> -	exit ;;
> -    NSE-?:NONSTOP_KERNEL:*:*)
> -	echo nse-tandem-nsk${UNAME_RELEASE}
> -	exit ;;
> -    NSR-?:NONSTOP_KERNEL:*:*)
> -	echo nsr-tandem-nsk${UNAME_RELEASE}
> -	exit ;;
> -    *:NonStop-UX:*:*)
> -	echo mips-compaq-nonstopux
> -	exit ;;
> -    BS2000:POSIX*:*:*)
> -	echo bs2000-siemens-sysv
> -	exit ;;
> -    DS/*:UNIX_System_V:*:*)
> -	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
> -	exit ;;
> -    *:Plan9:*:*)
> -	# "uname -m" is not consistent, so use $cputype instead. 386
> -	# is converted to i386 for consistency with other x86
> -	# operating systems.
> -	if test "$cputype" = "386"; then
> -	    UNAME_MACHINE=i386
> -	else
> -	    UNAME_MACHINE="$cputype"
> -	fi
> -	echo ${UNAME_MACHINE}-unknown-plan9
> -	exit ;;
> -    *:TOPS-10:*:*)
> -	echo pdp10-unknown-tops10
> -	exit ;;
> -    *:TENEX:*:*)
> -	echo pdp10-unknown-tenex
> -	exit ;;
> -    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
> -	echo pdp10-dec-tops20
> -	exit ;;
> -    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
> -	echo pdp10-xkl-tops20
> -	exit ;;
> -    *:TOPS-20:*:*)
> -	echo pdp10-unknown-tops20
> -	exit ;;
> -    *:ITS:*:*)
> -	echo pdp10-unknown-its
> -	exit ;;
> -    SEI:*:*:SEIUX)
> -	echo mips-sei-seiux${UNAME_RELEASE}
> -	exit ;;
> -    *:DragonFly:*:*)
> -	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
> -	exit ;;
> -    *:*VMS:*:*)
> -	UNAME_MACHINE=`(uname -p) 2>/dev/null`
> -	case "${UNAME_MACHINE}" in
> -	    A*) echo alpha-dec-vms ; exit ;;
> -	    I*) echo ia64-dec-vms ; exit ;;
> -	    V*) echo vax-dec-vms ; exit ;;
> -	esac ;;
> -    *:XENIX:*:SysV)
> -	echo i386-pc-xenix
> -	exit ;;
> -    i*86:skyos:*:*)
> -	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
> -	exit ;;
> -    i*86:rdos:*:*)
> -	echo ${UNAME_MACHINE}-pc-rdos
> -	exit ;;
> -    i*86:AROS:*:*)
> -	echo ${UNAME_MACHINE}-pc-aros
> -	exit ;;
> -esac
> -
> -#echo '(No uname command or uname output not recognized.)' 1>&2
> -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
> -
> -eval $set_cc_for_build
> -cat >$dummy.c <<EOF
> -#ifdef _SEQUENT_
> -# include <sys/types.h>
> -# include <sys/utsname.h>
> -#endif
> -main ()
> -{
> -#if defined (sony)
> -#if defined (MIPSEB)
> -  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
> -     I don't know....  */
> -  printf ("mips-sony-bsd\n"); exit (0);
> -#else
> -#include <sys/param.h>
> -  printf ("m68k-sony-newsos%s\n",
> -#ifdef NEWSOS4
> -	"4"
> -#else
> -	""
> -#endif
> -	); exit (0);
> -#endif
> -#endif
> -
> -#if defined (__arm) && defined (__acorn) && defined (__unix)
> -  printf ("arm-acorn-riscix\n"); exit (0);
> -#endif
> -
> -#if defined (hp300) && !defined (hpux)
> -  printf ("m68k-hp-bsd\n"); exit (0);
> -#endif
> -
> -#if defined (NeXT)
> -#if !defined (__ARCHITECTURE__)
> -#define __ARCHITECTURE__ "m68k"
> -#endif
> -  int version;
> -  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
> -  if (version < 4)
> -    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
> -  else
> -    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
> -  exit (0);
> -#endif
> -
> -#if defined (MULTIMAX) || defined (n16)
> -#if defined (UMAXV)
> -  printf ("ns32k-encore-sysv\n"); exit (0);
> -#else
> -#if defined (CMU)
> -  printf ("ns32k-encore-mach\n"); exit (0);
> -#else
> -  printf ("ns32k-encore-bsd\n"); exit (0);
> -#endif
> -#endif
> -#endif
> -
> -#if defined (__386BSD__)
> -  printf ("i386-pc-bsd\n"); exit (0);
> -#endif
> -
> -#if defined (sequent)
> -#if defined (i386)
> -  printf ("i386-sequent-dynix\n"); exit (0);
> -#endif
> -#if defined (ns32000)
> -  printf ("ns32k-sequent-dynix\n"); exit (0);
> -#endif
> -#endif
> -
> -#if defined (_SEQUENT_)
> -    struct utsname un;
> -
> -    uname(&un);
> -
> -    if (strncmp(un.version, "V2", 2) == 0) {
> -	printf ("i386-sequent-ptx2\n"); exit (0);
> -    }
> -    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
> -	printf ("i386-sequent-ptx1\n"); exit (0);
> -    }
> -    printf ("i386-sequent-ptx\n"); exit (0);
> -
> -#endif
> -
> -#if defined (vax)
> -# if !defined (ultrix)
> -#  include <sys/param.h>
> -#  if defined (BSD)
> -#   if BSD == 43
> -      printf ("vax-dec-bsd4.3\n"); exit (0);
> -#   else
> -#    if BSD == 199006
> -      printf ("vax-dec-bsd4.3reno\n"); exit (0);
> -#    else
> -      printf ("vax-dec-bsd\n"); exit (0);
> -#    endif
> -#   endif
> -#  else
> -    printf ("vax-dec-bsd\n"); exit (0);
> -#  endif
> -# else
> -    printf ("vax-dec-ultrix\n"); exit (0);
> -# endif
> -#endif
> -
> -#if defined (alliant) && defined (i860)
> -  printf ("i860-alliant-bsd\n"); exit (0);
> -#endif
> -
> -  exit (1);
> -}
> -EOF
> -
> -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
> -	{ echo "$SYSTEM_NAME"; exit; }
> -
> -# Apollos put the system type in the environment.
> -
> -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
> -
> -# Convex versions that predate uname can use getsysinfo(1)
> -
> -if [ -x /usr/convex/getsysinfo ]
> -then
> -    case `getsysinfo -f cpu_type` in
> -    c1*)
> -	echo c1-convex-bsd
> -	exit ;;
> -    c2*)
> -	if getsysinfo -f scalar_acc
> -	then echo c32-convex-bsd
> -	else echo c2-convex-bsd
> -	fi
> -	exit ;;
> -    c34*)
> -	echo c34-convex-bsd
> -	exit ;;
> -    c38*)
> -	echo c38-convex-bsd
> -	exit ;;
> -    c4*)
> -	echo c4-convex-bsd
> -	exit ;;
> -    esac
> -fi
> -
> -cat >&2 <<EOF
> -$0: unable to guess system type
> -
> -This script, last modified $timestamp, has failed to recognize
> -the operating system you are using. It is advised that you
> -download the most up to date version of the config scripts from
> -
> -  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
> -and
> -  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
> -
> -If the version you run ($0) is already up to date, please
> -send the following data and any information you think might be
> -pertinent to <config-patches@gnu.org> in order to provide the needed
> -information to handle your system.
> -
> -config.guess timestamp = $timestamp
> -
> -uname -m = `(uname -m) 2>/dev/null || echo unknown`
> -uname -r = `(uname -r) 2>/dev/null || echo unknown`
> -uname -s = `(uname -s) 2>/dev/null || echo unknown`
> -uname -v = `(uname -v) 2>/dev/null || echo unknown`
> -
> -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
> -/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
> -
> -hostinfo               = `(hostinfo) 2>/dev/null`
> -/bin/universe          = `(/bin/universe) 2>/dev/null`
> -/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
> -/bin/arch              = `(/bin/arch) 2>/dev/null`
> -/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
> -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
> -
> -UNAME_MACHINE = ${UNAME_MACHINE}
> -UNAME_RELEASE = ${UNAME_RELEASE}
> -UNAME_SYSTEM  = ${UNAME_SYSTEM}
> -UNAME_VERSION = ${UNAME_VERSION}
> -EOF
> -
> -exit 1
> -
> -# Local variables:
> -# eval: (add-hook 'write-file-hooks 'time-stamp)
> -# time-stamp-start: "timestamp='"
> -# time-stamp-format: "%:y-%02m-%02d"
> -# time-stamp-end: "'"
> -# End:
> diff --git a/config.h.in b/config.h.in
> deleted file mode 100644
> index cde022f..0000000
> --- a/config.h.in
> +++ /dev/null
> @@ -1,289 +0,0 @@
> -/* config.h.in.  Generated from configure.ac by autoheader.  */
> -
> -/* Define to 1 if you have the <assert.h> header file. */
> -#undef HAVE_ASSERT_H
> -
> -/* Define to 1 if you have the <ctype.h> header file. */
> -#undef HAVE_CTYPE_H
> -
> -/* Define to 1 if you have the <dlfcn.h> header file. */
> -#undef HAVE_DLFCN_H
> -
> -/* Define to 1 if you have the `dup2' function. */
> -#undef HAVE_DUP2
> -
> -/* Define to 1 if you have the <errno.h> header file. */
> -#undef HAVE_ERRNO_H
> -
> -/* Define to 1 if you have the <fcntl.h> header file. */
> -#undef HAVE_FCNTL_H
> -
> -/* Define to 1 if you have the `fork' function. */
> -#undef HAVE_FORK
> -
> -/* Define to 1 if you have the `getcwd' function. */
> -#undef HAVE_GETCWD
> -
> -/* Define to 1 if you have the <getopt.h> header file. */
> -#undef HAVE_GETOPT_H
> -
> -/* Define to 1 if you have the `getpagesize' function. */
> -#undef HAVE_GETPAGESIZE
> -
> -/* Define to 1 if you have the `gettimeofday' function. */
> -#undef HAVE_GETTIMEOFDAY
> -
> -/* Define to 1 if you have the <inttypes.h> header file. */
> -#undef HAVE_INTTYPES_H
> -
> -/* Define to 1 if you have the <json/json.h> header file. */
> -#undef HAVE_JSON_JSON_H
> -
> -/* Define to 1 if you have the <limits.h> header file. */
> -#undef HAVE_LIMITS_H
> -
> -/* Define to 1 if you have the <linux/input.h> header file. */
> -#undef HAVE_LINUX_INPUT_H
> -
> -/* Define to 1 if you have the `localtime_r' function. */
> -#undef HAVE_LOCALTIME_R
> -
> -/* Define to 1 if your system has a GNU libc compatible `malloc' function, and
> -   to 0 otherwise. */
> -#undef HAVE_MALLOC
> -
> -/* Define to 1 if you have the <math.h> header file. */
> -#undef HAVE_MATH_H
> -
> -/* Define to 1 if you have the <memory.h> header file. */
> -#undef HAVE_MEMORY_H
> -
> -/* Define to 1 if you have the `memset' function. */
> -#undef HAVE_MEMSET
> -
> -/* Define to 1 if you have the `mkdir' function. */
> -#undef HAVE_MKDIR
> -
> -/* Define to 1 if you have a working `mmap' system call. */
> -#undef HAVE_MMAP
> -
> -/* Define to 1 if you have the `munmap' function. */
> -#undef HAVE_MUNMAP
> -
> -/* Define to 1 if you have the <paths.h> header file. */
> -#undef HAVE_PATHS_H
> -
> -/* Define to 1 if you have the <pcre.h> header file. */
> -#undef HAVE_PCRE_H
> -
> -/* Define to 1 if your system has a GNU libc compatible `realloc' function,
> -   and to 0 otherwise. */
> -#undef HAVE_REALLOC
> -
> -/* Define to 1 if you have the <sched.h> header file. */
> -#undef HAVE_SCHED_H
> -
> -/* Define to 1 if you have the `select' function. */
> -#undef HAVE_SELECT
> -
> -/* Define to 1 if you have the <signal.h> header file. */
> -#undef HAVE_SIGNAL_H
> -
> -/* Define to 1 if you have the `socket' function. */
> -#undef HAVE_SOCKET
> -
> -/* Define to 1 if you have the `sqrt' function. */
> -#undef HAVE_SQRT
> -
> -/* Define to 1 if you have the <stdarg.h> header file. */
> -#undef HAVE_STDARG_H
> -
> -/* Define to 1 if you have the <stdint.h> header file. */
> -#undef HAVE_STDINT_H
> -
> -/* Define to 1 if you have the <stdio.h> header file. */
> -#undef HAVE_STDIO_H
> -
> -/* Define to 1 if you have the <stdlib.h> header file. */
> -#undef HAVE_STDLIB_H
> -
> -/* Define to 1 if you have the `strchr' function. */
> -#undef HAVE_STRCHR
> -
> -/* Define to 1 if you have the `strdup' function. */
> -#undef HAVE_STRDUP
> -
> -/* Define to 1 if you have the `strerror' function. */
> -#undef HAVE_STRERROR
> -
> -/* Define to 1 if you have the <strings.h> header file. */
> -#undef HAVE_STRINGS_H
> -
> -/* Define to 1 if you have the <string.h> header file. */
> -#undef HAVE_STRING_H
> -
> -/* Define to 1 if you have the `strstr' function. */
> -#undef HAVE_STRSTR
> -
> -/* Define to 1 if you have the `strtoul' function. */
> -#undef HAVE_STRTOUL
> -
> -/* Define to 1 if you have the `strtoull' function. */
> -#undef HAVE_STRTOULL
> -
> -/* Define to 1 if you have the <sys/ioctl.h> header file. */
> -#undef HAVE_SYS_IOCTL_H
> -
> -/* Define to 1 if you have the <sys/io.h> header file. */
> -#undef HAVE_SYS_IO_H
> -
> -/* Define to 1 if you have the <sys/klog.h> header file. */
> -#undef HAVE_SYS_KLOG_H
> -
> -/* Define to 1 if you have the <sys/mman.h> header file. */
> -#undef HAVE_SYS_MMAN_H
> -
> -/* Define to 1 if you have the <sys/param.h> header file. */
> -#undef HAVE_SYS_PARAM_H
> -
> -/* Define to 1 if you have the <sys/select.h> header file. */
> -#undef HAVE_SYS_SELECT_H
> -
> -/* Define to 1 if you have the <sys/socket.h> header file. */
> -#undef HAVE_SYS_SOCKET_H
> -
> -/* Define to 1 if you have the <sys/stat.h> header file. */
> -#undef HAVE_SYS_STAT_H
> -
> -/* Define to 1 if you have the <sys/time.h> header file. */
> -#undef HAVE_SYS_TIME_H
> -
> -/* Define to 1 if you have the <sys/types.h> header file. */
> -#undef HAVE_SYS_TYPES_H
> -
> -/* Define to 1 if you have the <sys/type.h> header file. */
> -#undef HAVE_SYS_TYPE_H
> -
> -/* Define to 1 if you have the <sys/un.h> header file. */
> -#undef HAVE_SYS_UN_H
> -
> -/* Define to 1 if you have the <sys/wait.h> header file. */
> -#undef HAVE_SYS_WAIT_H
> -
> -/* Define to 1 if you have the <termios.h> header file. */
> -#undef HAVE_TERMIOS_H
> -
> -/* Define to 1 if you have the <time.h> header file. */
> -#undef HAVE_TIME_H
> -
> -/* Define to 1 if you have the `uname' function. */
> -#undef HAVE_UNAME
> -
> -/* Define to 1 if you have the <unistd.h> header file. */
> -#undef HAVE_UNISTD_H
> -
> -/* Define to 1 if you have the `vfork' function. */
> -#undef HAVE_VFORK
> -
> -/* Define to 1 if you have the <vfork.h> header file. */
> -#undef HAVE_VFORK_H
> -
> -/* Define to 1 if `fork' works. */
> -#undef HAVE_WORKING_FORK
> -
> -/* Define to 1 if `vfork' works. */
> -#undef HAVE_WORKING_VFORK
> -
> -/* Define to 1 if `lstat' dereferences a symlink specified with a trailing
> -   slash. */
> -#undef LSTAT_FOLLOWS_SLASHED_SYMLINK
> -
> -/* Define to the sub-directory in which libtool stores uninstalled libraries.
> -   */
> -#undef LT_OBJDIR
> -
> -/* Name of package */
> -#undef PACKAGE
> -
> -/* Define to the address where bug reports for this package should be sent. */
> -#undef PACKAGE_BUGREPORT
> -
> -/* Define to the full name of this package. */
> -#undef PACKAGE_NAME
> -
> -/* Define to the full name and version of this package. */
> -#undef PACKAGE_STRING
> -
> -/* Define to the one symbol short name of this package. */
> -#undef PACKAGE_TARNAME
> -
> -/* Define to the home page for this package. */
> -#undef PACKAGE_URL
> -
> -/* Define to the version of this package. */
> -#undef PACKAGE_VERSION
> -
> -/* Define to 1 if you have the ANSI C header files. */
> -#undef STDC_HEADERS
> -
> -/* Version number of package */
> -#undef VERSION
> -
> -/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a
> -   `char[]'. */
> -#undef YYTEXT_POINTER
> -
> -/* Define for Solaris 2.5.1 so the uint32_t typedef from <sys/synch.h>,
> -   <pthread.h>, or <semaphore.h> is not used. If the typedef were allowed, the
> -   #define below would cause a syntax error. */
> -#undef _UINT32_T
> -
> -/* Define for Solaris 2.5.1 so the uint64_t typedef from <sys/synch.h>,
> -   <pthread.h>, or <semaphore.h> is not used. If the typedef were allowed, the
> -   #define below would cause a syntax error. */
> -#undef _UINT64_T
> -
> -/* Define for Solaris 2.5.1 so the uint8_t typedef from <sys/synch.h>,
> -   <pthread.h>, or <semaphore.h> is not used. If the typedef were allowed, the
> -   #define below would cause a syntax error. */
> -#undef _UINT8_T
> -
> -/* Define to `__inline__' or `__inline' if that's what the C compiler
> -   calls it, or to nothing if 'inline' is not supported under any name.  */
> -#ifndef __cplusplus
> -#undef inline
> -#endif
> -
> -/* Define to rpl_malloc if the replacement function should be used. */
> -#undef malloc
> -
> -/* Define to `long int' if <sys/types.h> does not define. */
> -#undef off_t
> -
> -/* Define to `int' if <sys/types.h> does not define. */
> -#undef pid_t
> -
> -/* Define to rpl_realloc if the replacement function should be used. */
> -#undef realloc
> -
> -/* Define to `unsigned int' if <sys/types.h> does not define. */
> -#undef size_t
> -
> -/* Define to the type of an unsigned integer type of width exactly 16 bits if
> -   such a type exists and the standard includes do not define it. */
> -#undef uint16_t
> -
> -/* Define to the type of an unsigned integer type of width exactly 32 bits if
> -   such a type exists and the standard includes do not define it. */
> -#undef uint32_t
> -
> -/* Define to the type of an unsigned integer type of width exactly 64 bits if
> -   such a type exists and the standard includes do not define it. */
> -#undef uint64_t
> -
> -/* Define to the type of an unsigned integer type of width exactly 8 bits if
> -   such a type exists and the standard includes do not define it. */
> -#undef uint8_t
> -
> -/* Define as `fork' if `vfork' does not work. */
> -#undef vfork
> diff --git a/config.sub b/config.sub
> deleted file mode 100755
> index 30fdca8..0000000
> --- a/config.sub
> +++ /dev/null
> @@ -1,1760 +0,0 @@
> -#! /bin/sh
> -# Configuration validation subroutine script.
> -#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
> -#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
> -#   2011 Free Software Foundation, Inc.
> -
> -timestamp='2011-03-23'
> -
> -# This file is (in principle) common to ALL GNU software.
> -# The presence of a machine in this file suggests that SOME GNU software
> -# can handle that machine.  It does not imply ALL GNU software can.
> -#
> -# This file is free software; you can redistribute it and/or modify
> -# it under the terms of the GNU General Public License as published by
> -# the Free Software Foundation; either version 2 of the License, or
> -# (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; if not, write to the Free Software
> -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
> -# 02110-1301, USA.
> -#
> -# As a special exception to the GNU General Public License, if you
> -# distribute this file as part of a program that contains a
> -# configuration script generated by Autoconf, you may include it under
> -# the same distribution terms that you use for the rest of that program.
> -
> -
> -# Please send patches to <config-patches@gnu.org>.  Submit a context
> -# diff and a properly formatted GNU ChangeLog entry.
> -#
> -# Configuration subroutine to validate and canonicalize a configuration type.
> -# Supply the specified configuration type as an argument.
> -# If it is invalid, we print an error message on stderr and exit with code 1.
> -# Otherwise, we print the canonical config type on stdout and succeed.
> -
> -# You can get the latest version of this script from:
> -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
> -
> -# This file is supposed to be the same for all GNU packages
> -# and recognize all the CPU types, system types and aliases
> -# that are meaningful with *any* GNU software.
> -# Each package is responsible for reporting which valid configurations
> -# it does not support.  The user should be able to distinguish
> -# a failure to support a valid configuration from a meaningless
> -# configuration.
> -
> -# The goal of this file is to map all the various variations of a given
> -# machine specification into a single specification in the form:
> -#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
> -# or in some cases, the newer four-part form:
> -#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
> -# It is wrong to echo any other type of specification.
> -
> -me=`echo "$0" | sed -e 's,.*/,,'`
> -
> -usage="\
> -Usage: $0 [OPTION] CPU-MFR-OPSYS
> -       $0 [OPTION] ALIAS
> -
> -Canonicalize a configuration name.
> -
> -Operation modes:
> -  -h, --help         print this help, then exit
> -  -t, --time-stamp   print date of last modification, then exit
> -  -v, --version      print version number, then exit
> -
> -Report bugs and patches to <config-patches@gnu.org>."
> -
> -version="\
> -GNU config.sub ($timestamp)
> -
> -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
> -2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free
> -Software Foundation, Inc.
> -
> -This is free software; see the source for copying conditions.  There is NO
> -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
> -
> -help="
> -Try \`$me --help' for more information."
> -
> -# Parse command line
> -while test $# -gt 0 ; do
> -  case $1 in
> -    --time-stamp | --time* | -t )
> -       echo "$timestamp" ; exit ;;
> -    --version | -v )
> -       echo "$version" ; exit ;;
> -    --help | --h* | -h )
> -       echo "$usage"; exit ;;
> -    -- )     # Stop option processing
> -       shift; break ;;
> -    - )	# Use stdin as input.
> -       break ;;
> -    -* )
> -       echo "$me: invalid option $1$help"
> -       exit 1 ;;
> -
> -    *local*)
> -       # First pass through any local machine types.
> -       echo $1
> -       exit ;;
> -
> -    * )
> -       break ;;
> -  esac
> -done
> -
> -case $# in
> - 0) echo "$me: missing argument$help" >&2
> -    exit 1;;
> - 1) ;;
> - *) echo "$me: too many arguments$help" >&2
> -    exit 1;;
> -esac
> -
> -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
> -# Here we must recognize all the valid KERNEL-OS combinations.
> -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
> -case $maybe_os in
> -  nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
> -  linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
> -  knetbsd*-gnu* | netbsd*-gnu* | \
> -  kopensolaris*-gnu* | \
> -  storm-chaos* | os2-emx* | rtmk-nova*)
> -    os=-$maybe_os
> -    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
> -    ;;
> -  *)
> -    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
> -    if [ $basic_machine != $1 ]
> -    then os=`echo $1 | sed 's/.*-/-/'`
> -    else os=; fi
> -    ;;
> -esac
> -
> -### Let's recognize common machines as not being operating systems so
> -### that things like config.sub decstation-3100 work.  We also
> -### recognize some manufacturers as not being operating systems, so we
> -### can provide default operating systems below.
> -case $os in
> -	-sun*os*)
> -		# Prevent following clause from handling this invalid input.
> -		;;
> -	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
> -	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
> -	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
> -	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
> -	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
> -	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
> -	-apple | -axis | -knuth | -cray | -microblaze)
> -		os=
> -		basic_machine=$1
> -		;;
> -	-bluegene*)
> -		os=-cnk
> -		;;
> -	-sim | -cisco | -oki | -wec | -winbond)
> -		os=
> -		basic_machine=$1
> -		;;
> -	-scout)
> -		;;
> -	-wrs)
> -		os=-vxworks
> -		basic_machine=$1
> -		;;
> -	-chorusos*)
> -		os=-chorusos
> -		basic_machine=$1
> -		;;
> -	-chorusrdb)
> -		os=-chorusrdb
> -		basic_machine=$1
> -		;;
> -	-hiux*)
> -		os=-hiuxwe2
> -		;;
> -	-sco6)
> -		os=-sco5v6
> -		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
> -		;;
> -	-sco5)
> -		os=-sco3.2v5
> -		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
> -		;;
> -	-sco4)
> -		os=-sco3.2v4
> -		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
> -		;;
> -	-sco3.2.[4-9]*)
> -		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
> -		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
> -		;;
> -	-sco3.2v[4-9]*)
> -		# Don't forget version if it is 3.2v4 or newer.
> -		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
> -		;;
> -	-sco5v6*)
> -		# Don't forget version if it is 3.2v4 or newer.
> -		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
> -		;;
> -	-sco*)
> -		os=-sco3.2v2
> -		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
> -		;;
> -	-udk*)
> -		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
> -		;;
> -	-isc)
> -		os=-isc2.2
> -		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
> -		;;
> -	-clix*)
> -		basic_machine=clipper-intergraph
> -		;;
> -	-isc*)
> -		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
> -		;;
> -	-lynx*)
> -		os=-lynxos
> -		;;
> -	-ptx*)
> -		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
> -		;;
> -	-windowsnt*)
> -		os=`echo $os | sed -e 's/windowsnt/winnt/'`
> -		;;
> -	-psos*)
> -		os=-psos
> -		;;
> -	-mint | -mint[0-9]*)
> -		basic_machine=m68k-atari
> -		os=-mint
> -		;;
> -esac
> -
> -# Decode aliases for certain CPU-COMPANY combinations.
> -case $basic_machine in
> -	# Recognize the basic CPU types without company name.
> -	# Some are omitted here because they have special meanings below.
> -	1750a | 580 \
> -	| a29k \
> -	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
> -	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
> -	| am33_2.0 \
> -	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
> -	| bfin \
> -	| c4x | clipper \
> -	| d10v | d30v | dlx | dsp16xx \
> -	| fido | fr30 | frv \
> -	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
> -	| i370 | i860 | i960 | ia64 \
> -	| ip2k | iq2000 \
> -	| lm32 \
> -	| m32c | m32r | m32rle | m68000 | m68k | m88k \
> -	| maxq | mb | microblaze | mcore | mep | metag \
> -	| mips | mipsbe | mipseb | mipsel | mipsle \
> -	| mips16 \
> -	| mips64 | mips64el \
> -	| mips64octeon | mips64octeonel \
> -	| mips64orion | mips64orionel \
> -	| mips64r5900 | mips64r5900el \
> -	| mips64vr | mips64vrel \
> -	| mips64vr4100 | mips64vr4100el \
> -	| mips64vr4300 | mips64vr4300el \
> -	| mips64vr5000 | mips64vr5000el \
> -	| mips64vr5900 | mips64vr5900el \
> -	| mipsisa32 | mipsisa32el \
> -	| mipsisa32r2 | mipsisa32r2el \
> -	| mipsisa64 | mipsisa64el \
> -	| mipsisa64r2 | mipsisa64r2el \
> -	| mipsisa64sb1 | mipsisa64sb1el \
> -	| mipsisa64sr71k | mipsisa64sr71kel \
> -	| mipstx39 | mipstx39el \
> -	| mn10200 | mn10300 \
> -	| moxie \
> -	| mt \
> -	| msp430 \
> -	| nds32 | nds32le | nds32be \
> -	| nios | nios2 \
> -	| ns16k | ns32k \
> -	| open8 \
> -	| or32 \
> -	| pdp10 | pdp11 | pj | pjl \
> -	| powerpc | powerpc64 | powerpc64le | powerpcle \
> -	| pyramid \
> -	| rx \
> -	| score \
> -	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
> -	| sh64 | sh64le \
> -	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
> -	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
> -	| spu \
> -	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
> -	| ubicom32 \
> -	| v850 | v850e \
> -	| we32k \
> -	| x86 | xc16x | xstormy16 | xtensa \
> -	| z8k | z80)
> -		basic_machine=$basic_machine-unknown
> -		;;
> -	c54x)
> -		basic_machine=tic54x-unknown
> -		;;
> -	c55x)
> -		basic_machine=tic55x-unknown
> -		;;
> -	c6x)
> -		basic_machine=tic6x-unknown
> -		;;
> -	m6811 | m68hc11 | m6812 | m68hc12 | picochip)
> -		# Motorola 68HC11/12.
> -		basic_machine=$basic_machine-unknown
> -		os=-none
> -		;;
> -	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
> -		;;
> -	ms1)
> -		basic_machine=mt-unknown
> -		;;
> -
> -	strongarm | thumb | xscale)
> -		basic_machine=arm-unknown
> -		;;
> -
> -	xscaleeb)
> -		basic_machine=armeb-unknown
> -		;;
> -
> -	xscaleel)
> -		basic_machine=armel-unknown
> -		;;
> -
> -	# We use `pc' rather than `unknown'
> -	# because (1) that's what they normally are, and
> -	# (2) the word "unknown" tends to confuse beginning users.
> -	i*86 | x86_64)
> -	  basic_machine=$basic_machine-pc
> -	  ;;
> -	# Object if more than one company name word.
> -	*-*-*)
> -		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
> -		exit 1
> -		;;
> -	# Recognize the basic CPU types with company name.
> -	580-* \
> -	| a29k-* \
> -	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
> -	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
> -	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
> -	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
> -	| avr-* | avr32-* \
> -	| bfin-* | bs2000-* \
> -	| c[123]* | c30-* | [cjt]90-* | c4x-* \
> -	| clipper-* | craynv-* | cydra-* \
> -	| d10v-* | d30v-* | dlx-* \
> -	| elxsi-* \
> -	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
> -	| h8300-* | h8500-* \
> -	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
> -	| i*86-* | i860-* | i960-* | ia64-* \
> -	| ip2k-* | iq2000-* \
> -	| lm32-* \
> -	| m32c-* | m32r-* | m32rle-* \
> -	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
> -	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
> -	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
> -	| mips16-* \
> -	| mips64-* | mips64el-* \
> -	| mips64octeon-* | mips64octeonel-* \
> -	| mips64orion-* | mips64orionel-* \
> -	| mips64r5900-* | mips64r5900el-* \
> -	| mips64vr-* | mips64vrel-* \
> -	| mips64vr4100-* | mips64vr4100el-* \
> -	| mips64vr4300-* | mips64vr4300el-* \
> -	| mips64vr5000-* | mips64vr5000el-* \
> -	| mips64vr5900-* | mips64vr5900el-* \
> -	| mipsisa32-* | mipsisa32el-* \
> -	| mipsisa32r2-* | mipsisa32r2el-* \
> -	| mipsisa64-* | mipsisa64el-* \
> -	| mipsisa64r2-* | mipsisa64r2el-* \
> -	| mipsisa64sb1-* | mipsisa64sb1el-* \
> -	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
> -	| mipstx39-* | mipstx39el-* \
> -	| mmix-* \
> -	| mt-* \
> -	| msp430-* \
> -	| nds32-* | nds32le-* | nds32be-* \
> -	| nios-* | nios2-* \
> -	| none-* | np1-* | ns16k-* | ns32k-* \
> -	| open8-* \
> -	| orion-* \
> -	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
> -	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
> -	| pyramid-* \
> -	| romp-* | rs6000-* | rx-* \
> -	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
> -	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
> -	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
> -	| sparclite-* \
> -	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
> -	| tahoe-* \
> -	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
> -	| tile-* | tilegx-* \
> -	| tron-* \
> -	| ubicom32-* \
> -	| v850-* | v850e-* | vax-* \
> -	| we32k-* \
> -	| x86-* | x86_64-* | xc16x-* | xps100-* \
> -	| xstormy16-* | xtensa*-* \
> -	| ymp-* \
> -	| z8k-* | z80-*)
> -		;;
> -	# Recognize the basic CPU types without company name, with glob match.
> -	xtensa*)
> -		basic_machine=$basic_machine-unknown
> -		;;
> -	# Recognize the various machine names and aliases which stand
> -	# for a CPU type and a company and sometimes even an OS.
> -	386bsd)
> -		basic_machine=i386-unknown
> -		os=-bsd
> -		;;
> -	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
> -		basic_machine=m68000-att
> -		;;
> -	3b*)
> -		basic_machine=we32k-att
> -		;;
> -	a29khif)
> -		basic_machine=a29k-amd
> -		os=-udi
> -		;;
> -	abacus)
> -		basic_machine=abacus-unknown
> -		;;
> -	adobe68k)
> -		basic_machine=m68010-adobe
> -		os=-scout
> -		;;
> -	alliant | fx80)
> -		basic_machine=fx80-alliant
> -		;;
> -	altos | altos3068)
> -		basic_machine=m68k-altos
> -		;;
> -	am29k)
> -		basic_machine=a29k-none
> -		os=-bsd
> -		;;
> -	amd64)
> -		basic_machine=x86_64-pc
> -		;;
> -	amd64-*)
> -		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	amdahl)
> -		basic_machine=580-amdahl
> -		os=-sysv
> -		;;
> -	amiga | amiga-*)
> -		basic_machine=m68k-unknown
> -		;;
> -	amigaos | amigados)
> -		basic_machine=m68k-unknown
> -		os=-amigaos
> -		;;
> -	amigaunix | amix)
> -		basic_machine=m68k-unknown
> -		os=-sysv4
> -		;;
> -	apollo68)
> -		basic_machine=m68k-apollo
> -		os=-sysv
> -		;;
> -	apollo68bsd)
> -		basic_machine=m68k-apollo
> -		os=-bsd
> -		;;
> -	aros)
> -		basic_machine=i386-pc
> -		os=-aros
> -		;;
> -	aux)
> -		basic_machine=m68k-apple
> -		os=-aux
> -		;;
> -	balance)
> -		basic_machine=ns32k-sequent
> -		os=-dynix
> -		;;
> -	blackfin)
> -		basic_machine=bfin-unknown
> -		os=-linux
> -		;;
> -	blackfin-*)
> -		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		os=-linux
> -		;;
> -	bluegene*)
> -		basic_machine=powerpc-ibm
> -		os=-cnk
> -		;;
> -	c54x-*)
> -		basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	c55x-*)
> -		basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	c6x-*)
> -		basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	c90)
> -		basic_machine=c90-cray
> -		os=-unicos
> -		;;
> -	cegcc)
> -		basic_machine=arm-unknown
> -		os=-cegcc
> -		;;
> -	convex-c1)
> -		basic_machine=c1-convex
> -		os=-bsd
> -		;;
> -	convex-c2)
> -		basic_machine=c2-convex
> -		os=-bsd
> -		;;
> -	convex-c32)
> -		basic_machine=c32-convex
> -		os=-bsd
> -		;;
> -	convex-c34)
> -		basic_machine=c34-convex
> -		os=-bsd
> -		;;
> -	convex-c38)
> -		basic_machine=c38-convex
> -		os=-bsd
> -		;;
> -	cray | j90)
> -		basic_machine=j90-cray
> -		os=-unicos
> -		;;
> -	craynv)
> -		basic_machine=craynv-cray
> -		os=-unicosmp
> -		;;
> -	cr16 | cr16-*)
> -		basic_machine=cr16-unknown
> -		os=-elf
> -		;;
> -	crds | unos)
> -		basic_machine=m68k-crds
> -		;;
> -	crisv32 | crisv32-* | etraxfs*)
> -		basic_machine=crisv32-axis
> -		;;
> -	cris | cris-* | etrax*)
> -		basic_machine=cris-axis
> -		;;
> -	crx)
> -		basic_machine=crx-unknown
> -		os=-elf
> -		;;
> -	da30 | da30-*)
> -		basic_machine=m68k-da30
> -		;;
> -	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
> -		basic_machine=mips-dec
> -		;;
> -	decsystem10* | dec10*)
> -		basic_machine=pdp10-dec
> -		os=-tops10
> -		;;
> -	decsystem20* | dec20*)
> -		basic_machine=pdp10-dec
> -		os=-tops20
> -		;;
> -	delta | 3300 | motorola-3300 | motorola-delta \
> -	      | 3300-motorola | delta-motorola)
> -		basic_machine=m68k-motorola
> -		;;
> -	delta88)
> -		basic_machine=m88k-motorola
> -		os=-sysv3
> -		;;
> -	dicos)
> -		basic_machine=i686-pc
> -		os=-dicos
> -		;;
> -	djgpp)
> -		basic_machine=i586-pc
> -		os=-msdosdjgpp
> -		;;
> -	dpx20 | dpx20-*)
> -		basic_machine=rs6000-bull
> -		os=-bosx
> -		;;
> -	dpx2* | dpx2*-bull)
> -		basic_machine=m68k-bull
> -		os=-sysv3
> -		;;
> -	ebmon29k)
> -		basic_machine=a29k-amd
> -		os=-ebmon
> -		;;
> -	elxsi)
> -		basic_machine=elxsi-elxsi
> -		os=-bsd
> -		;;
> -	encore | umax | mmax)
> -		basic_machine=ns32k-encore
> -		;;
> -	es1800 | OSE68k | ose68k | ose | OSE)
> -		basic_machine=m68k-ericsson
> -		os=-ose
> -		;;
> -	fx2800)
> -		basic_machine=i860-alliant
> -		;;
> -	genix)
> -		basic_machine=ns32k-ns
> -		;;
> -	gmicro)
> -		basic_machine=tron-gmicro
> -		os=-sysv
> -		;;
> -	go32)
> -		basic_machine=i386-pc
> -		os=-go32
> -		;;
> -	h3050r* | hiux*)
> -		basic_machine=hppa1.1-hitachi
> -		os=-hiuxwe2
> -		;;
> -	h8300hms)
> -		basic_machine=h8300-hitachi
> -		os=-hms
> -		;;
> -	h8300xray)
> -		basic_machine=h8300-hitachi
> -		os=-xray
> -		;;
> -	h8500hms)
> -		basic_machine=h8500-hitachi
> -		os=-hms
> -		;;
> -	harris)
> -		basic_machine=m88k-harris
> -		os=-sysv3
> -		;;
> -	hp300-*)
> -		basic_machine=m68k-hp
> -		;;
> -	hp300bsd)
> -		basic_machine=m68k-hp
> -		os=-bsd
> -		;;
> -	hp300hpux)
> -		basic_machine=m68k-hp
> -		os=-hpux
> -		;;
> -	hp3k9[0-9][0-9] | hp9[0-9][0-9])
> -		basic_machine=hppa1.0-hp
> -		;;
> -	hp9k2[0-9][0-9] | hp9k31[0-9])
> -		basic_machine=m68000-hp
> -		;;
> -	hp9k3[2-9][0-9])
> -		basic_machine=m68k-hp
> -		;;
> -	hp9k6[0-9][0-9] | hp6[0-9][0-9])
> -		basic_machine=hppa1.0-hp
> -		;;
> -	hp9k7[0-79][0-9] | hp7[0-79][0-9])
> -		basic_machine=hppa1.1-hp
> -		;;
> -	hp9k78[0-9] | hp78[0-9])
> -		# FIXME: really hppa2.0-hp
> -		basic_machine=hppa1.1-hp
> -		;;
> -	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
> -		# FIXME: really hppa2.0-hp
> -		basic_machine=hppa1.1-hp
> -		;;
> -	hp9k8[0-9][13679] | hp8[0-9][13679])
> -		basic_machine=hppa1.1-hp
> -		;;
> -	hp9k8[0-9][0-9] | hp8[0-9][0-9])
> -		basic_machine=hppa1.0-hp
> -		;;
> -	hppa-next)
> -		os=-nextstep3
> -		;;
> -	hppaosf)
> -		basic_machine=hppa1.1-hp
> -		os=-osf
> -		;;
> -	hppro)
> -		basic_machine=hppa1.1-hp
> -		os=-proelf
> -		;;
> -	i370-ibm* | ibm*)
> -		basic_machine=i370-ibm
> -		;;
> -# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
> -	i*86v32)
> -		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
> -		os=-sysv32
> -		;;
> -	i*86v4*)
> -		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
> -		os=-sysv4
> -		;;
> -	i*86v)
> -		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
> -		os=-sysv
> -		;;
> -	i*86sol2)
> -		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
> -		os=-solaris2
> -		;;
> -	i386mach)
> -		basic_machine=i386-mach
> -		os=-mach
> -		;;
> -	i386-vsta | vsta)
> -		basic_machine=i386-unknown
> -		os=-vsta
> -		;;
> -	iris | iris4d)
> -		basic_machine=mips-sgi
> -		case $os in
> -		    -irix*)
> -			;;
> -		    *)
> -			os=-irix4
> -			;;
> -		esac
> -		;;
> -	isi68 | isi)
> -		basic_machine=m68k-isi
> -		os=-sysv
> -		;;
> -	m68knommu)
> -		basic_machine=m68k-unknown
> -		os=-linux
> -		;;
> -	m68knommu-*)
> -		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		os=-linux
> -		;;
> -	m88k-omron*)
> -		basic_machine=m88k-omron
> -		;;
> -	magnum | m3230)
> -		basic_machine=mips-mips
> -		os=-sysv
> -		;;
> -	merlin)
> -		basic_machine=ns32k-utek
> -		os=-sysv
> -		;;
> -	microblaze)
> -		basic_machine=microblaze-xilinx
> -		;;
> -	mingw32)
> -		basic_machine=i386-pc
> -		os=-mingw32
> -		;;
> -	mingw32ce)
> -		basic_machine=arm-unknown
> -		os=-mingw32ce
> -		;;
> -	miniframe)
> -		basic_machine=m68000-convergent
> -		;;
> -	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
> -		basic_machine=m68k-atari
> -		os=-mint
> -		;;
> -	mips3*-*)
> -		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
> -		;;
> -	mips3*)
> -		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
> -		;;
> -	monitor)
> -		basic_machine=m68k-rom68k
> -		os=-coff
> -		;;
> -	morphos)
> -		basic_machine=powerpc-unknown
> -		os=-morphos
> -		;;
> -	msdos)
> -		basic_machine=i386-pc
> -		os=-msdos
> -		;;
> -	ms1-*)
> -		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
> -		;;
> -	mvs)
> -		basic_machine=i370-ibm
> -		os=-mvs
> -		;;
> -	ncr3000)
> -		basic_machine=i486-ncr
> -		os=-sysv4
> -		;;
> -	netbsd386)
> -		basic_machine=i386-unknown
> -		os=-netbsd
> -		;;
> -	netwinder)
> -		basic_machine=armv4l-rebel
> -		os=-linux
> -		;;
> -	news | news700 | news800 | news900)
> -		basic_machine=m68k-sony
> -		os=-newsos
> -		;;
> -	news1000)
> -		basic_machine=m68030-sony
> -		os=-newsos
> -		;;
> -	news-3600 | risc-news)
> -		basic_machine=mips-sony
> -		os=-newsos
> -		;;
> -	necv70)
> -		basic_machine=v70-nec
> -		os=-sysv
> -		;;
> -	next | m*-next )
> -		basic_machine=m68k-next
> -		case $os in
> -		    -nextstep* )
> -			;;
> -		    -ns2*)
> -		      os=-nextstep2
> -			;;
> -		    *)
> -		      os=-nextstep3
> -			;;
> -		esac
> -		;;
> -	nh3000)
> -		basic_machine=m68k-harris
> -		os=-cxux
> -		;;
> -	nh[45]000)
> -		basic_machine=m88k-harris
> -		os=-cxux
> -		;;
> -	nindy960)
> -		basic_machine=i960-intel
> -		os=-nindy
> -		;;
> -	mon960)
> -		basic_machine=i960-intel
> -		os=-mon960
> -		;;
> -	nonstopux)
> -		basic_machine=mips-compaq
> -		os=-nonstopux
> -		;;
> -	np1)
> -		basic_machine=np1-gould
> -		;;
> -	neo-tandem)
> -		basic_machine=neo-tandem
> -		;;
> -	nse-tandem)
> -		basic_machine=nse-tandem
> -		;;
> -	nsr-tandem)
> -		basic_machine=nsr-tandem
> -		;;
> -	op50n-* | op60c-*)
> -		basic_machine=hppa1.1-oki
> -		os=-proelf
> -		;;
> -	openrisc | openrisc-*)
> -		basic_machine=or32-unknown
> -		;;
> -	os400)
> -		basic_machine=powerpc-ibm
> -		os=-os400
> -		;;
> -	OSE68000 | ose68000)
> -		basic_machine=m68000-ericsson
> -		os=-ose
> -		;;
> -	os68k)
> -		basic_machine=m68k-none
> -		os=-os68k
> -		;;
> -	pa-hitachi)
> -		basic_machine=hppa1.1-hitachi
> -		os=-hiuxwe2
> -		;;
> -	paragon)
> -		basic_machine=i860-intel
> -		os=-osf
> -		;;
> -	parisc)
> -		basic_machine=hppa-unknown
> -		os=-linux
> -		;;
> -	parisc-*)
> -		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		os=-linux
> -		;;
> -	pbd)
> -		basic_machine=sparc-tti
> -		;;
> -	pbb)
> -		basic_machine=m68k-tti
> -		;;
> -	pc532 | pc532-*)
> -		basic_machine=ns32k-pc532
> -		;;
> -	pc98)
> -		basic_machine=i386-pc
> -		;;
> -	pc98-*)
> -		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	pentium | p5 | k5 | k6 | nexgen | viac3)
> -		basic_machine=i586-pc
> -		;;
> -	pentiumpro | p6 | 6x86 | athlon | athlon_*)
> -		basic_machine=i686-pc
> -		;;
> -	pentiumii | pentium2 | pentiumiii | pentium3)
> -		basic_machine=i686-pc
> -		;;
> -	pentium4)
> -		basic_machine=i786-pc
> -		;;
> -	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
> -		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	pentiumpro-* | p6-* | 6x86-* | athlon-*)
> -		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
> -		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	pentium4-*)
> -		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	pn)
> -		basic_machine=pn-gould
> -		;;
> -	power)	basic_machine=power-ibm
> -		;;
> -	ppc | ppcbe)	basic_machine=powerpc-unknown
> -		;;
> -	ppc-* | ppcbe-*)
> -		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	ppcle | powerpclittle | ppc-le | powerpc-little)
> -		basic_machine=powerpcle-unknown
> -		;;
> -	ppcle-* | powerpclittle-*)
> -		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	ppc64)	basic_machine=powerpc64-unknown
> -		;;
> -	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
> -		basic_machine=powerpc64le-unknown
> -		;;
> -	ppc64le-* | powerpc64little-*)
> -		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	ps2)
> -		basic_machine=i386-ibm
> -		;;
> -	pw32)
> -		basic_machine=i586-unknown
> -		os=-pw32
> -		;;
> -	rdos)
> -		basic_machine=i386-pc
> -		os=-rdos
> -		;;
> -	rom68k)
> -		basic_machine=m68k-rom68k
> -		os=-coff
> -		;;
> -	rm[46]00)
> -		basic_machine=mips-siemens
> -		;;
> -	rtpc | rtpc-*)
> -		basic_machine=romp-ibm
> -		;;
> -	s390 | s390-*)
> -		basic_machine=s390-ibm
> -		;;
> -	s390x | s390x-*)
> -		basic_machine=s390x-ibm
> -		;;
> -	sa29200)
> -		basic_machine=a29k-amd
> -		os=-udi
> -		;;
> -	sb1)
> -		basic_machine=mipsisa64sb1-unknown
> -		;;
> -	sb1el)
> -		basic_machine=mipsisa64sb1el-unknown
> -		;;
> -	sde)
> -		basic_machine=mipsisa32-sde
> -		os=-elf
> -		;;
> -	sei)
> -		basic_machine=mips-sei
> -		os=-seiux
> -		;;
> -	sequent)
> -		basic_machine=i386-sequent
> -		;;
> -	sh)
> -		basic_machine=sh-hitachi
> -		os=-hms
> -		;;
> -	sh5el)
> -		basic_machine=sh5le-unknown
> -		;;
> -	sh64)
> -		basic_machine=sh64-unknown
> -		;;
> -	sparclite-wrs | simso-wrs)
> -		basic_machine=sparclite-wrs
> -		os=-vxworks
> -		;;
> -	sps7)
> -		basic_machine=m68k-bull
> -		os=-sysv2
> -		;;
> -	spur)
> -		basic_machine=spur-unknown
> -		;;
> -	st2000)
> -		basic_machine=m68k-tandem
> -		;;
> -	stratus)
> -		basic_machine=i860-stratus
> -		os=-sysv4
> -		;;
> -	strongarm-* | thumb-*)
> -		basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
> -		;;
> -	sun2)
> -		basic_machine=m68000-sun
> -		;;
> -	sun2os3)
> -		basic_machine=m68000-sun
> -		os=-sunos3
> -		;;
> -	sun2os4)
> -		basic_machine=m68000-sun
> -		os=-sunos4
> -		;;
> -	sun3os3)
> -		basic_machine=m68k-sun
> -		os=-sunos3
> -		;;
> -	sun3os4)
> -		basic_machine=m68k-sun
> -		os=-sunos4
> -		;;
> -	sun4os3)
> -		basic_machine=sparc-sun
> -		os=-sunos3
> -		;;
> -	sun4os4)
> -		basic_machine=sparc-sun
> -		os=-sunos4
> -		;;
> -	sun4sol2)
> -		basic_machine=sparc-sun
> -		os=-solaris2
> -		;;
> -	sun3 | sun3-*)
> -		basic_machine=m68k-sun
> -		;;
> -	sun4)
> -		basic_machine=sparc-sun
> -		;;
> -	sun386 | sun386i | roadrunner)
> -		basic_machine=i386-sun
> -		;;
> -	sv1)
> -		basic_machine=sv1-cray
> -		os=-unicos
> -		;;
> -	symmetry)
> -		basic_machine=i386-sequent
> -		os=-dynix
> -		;;
> -	t3e)
> -		basic_machine=alphaev5-cray
> -		os=-unicos
> -		;;
> -	t90)
> -		basic_machine=t90-cray
> -		os=-unicos
> -		;;
> -	# This must be matched before tile*.
> -	tilegx*)
> -		basic_machine=tilegx-unknown
> -		os=-linux-gnu
> -		;;
> -	tile*)
> -		basic_machine=tile-unknown
> -		os=-linux-gnu
> -		;;
> -	tx39)
> -		basic_machine=mipstx39-unknown
> -		;;
> -	tx39el)
> -		basic_machine=mipstx39el-unknown
> -		;;
> -	toad1)
> -		basic_machine=pdp10-xkl
> -		os=-tops20
> -		;;
> -	tower | tower-32)
> -		basic_machine=m68k-ncr
> -		;;
> -	tpf)
> -		basic_machine=s390x-ibm
> -		os=-tpf
> -		;;
> -	udi29k)
> -		basic_machine=a29k-amd
> -		os=-udi
> -		;;
> -	ultra3)
> -		basic_machine=a29k-nyu
> -		os=-sym1
> -		;;
> -	v810 | necv810)
> -		basic_machine=v810-nec
> -		os=-none
> -		;;
> -	vaxv)
> -		basic_machine=vax-dec
> -		os=-sysv
> -		;;
> -	vms)
> -		basic_machine=vax-dec
> -		os=-vms
> -		;;
> -	vpp*|vx|vx-*)
> -		basic_machine=f301-fujitsu
> -		;;
> -	vxworks960)
> -		basic_machine=i960-wrs
> -		os=-vxworks
> -		;;
> -	vxworks68)
> -		basic_machine=m68k-wrs
> -		os=-vxworks
> -		;;
> -	vxworks29k)
> -		basic_machine=a29k-wrs
> -		os=-vxworks
> -		;;
> -	w65*)
> -		basic_machine=w65-wdc
> -		os=-none
> -		;;
> -	w89k-*)
> -		basic_machine=hppa1.1-winbond
> -		os=-proelf
> -		;;
> -	xbox)
> -		basic_machine=i686-pc
> -		os=-mingw32
> -		;;
> -	xps | xps100)
> -		basic_machine=xps100-honeywell
> -		;;
> -	xscale-* | xscalee[bl]-*)
> -		basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
> -		;;
> -	ymp)
> -		basic_machine=ymp-cray
> -		os=-unicos
> -		;;
> -	z8k-*-coff)
> -		basic_machine=z8k-unknown
> -		os=-sim
> -		;;
> -	z80-*-coff)
> -		basic_machine=z80-unknown
> -		os=-sim
> -		;;
> -	none)
> -		basic_machine=none-none
> -		os=-none
> -		;;
> -
> -# Here we handle the default manufacturer of certain CPU types.  It is in
> -# some cases the only manufacturer, in others, it is the most popular.
> -	w89k)
> -		basic_machine=hppa1.1-winbond
> -		;;
> -	op50n)
> -		basic_machine=hppa1.1-oki
> -		;;
> -	op60c)
> -		basic_machine=hppa1.1-oki
> -		;;
> -	romp)
> -		basic_machine=romp-ibm
> -		;;
> -	mmix)
> -		basic_machine=mmix-knuth
> -		;;
> -	rs6000)
> -		basic_machine=rs6000-ibm
> -		;;
> -	vax)
> -		basic_machine=vax-dec
> -		;;
> -	pdp10)
> -		# there are many clones, so DEC is not a safe bet
> -		basic_machine=pdp10-unknown
> -		;;
> -	pdp11)
> -		basic_machine=pdp11-dec
> -		;;
> -	we32k)
> -		basic_machine=we32k-att
> -		;;
> -	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
> -		basic_machine=sh-unknown
> -		;;
> -	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
> -		basic_machine=sparc-sun
> -		;;
> -	cydra)
> -		basic_machine=cydra-cydrome
> -		;;
> -	orion)
> -		basic_machine=orion-highlevel
> -		;;
> -	orion105)
> -		basic_machine=clipper-highlevel
> -		;;
> -	mac | mpw | mac-mpw)
> -		basic_machine=m68k-apple
> -		;;
> -	pmac | pmac-mpw)
> -		basic_machine=powerpc-apple
> -		;;
> -	*-unknown)
> -		# Make sure to match an already-canonicalized machine name.
> -		;;
> -	*)
> -		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
> -		exit 1
> -		;;
> -esac
> -
> -# Here we canonicalize certain aliases for manufacturers.
> -case $basic_machine in
> -	*-digital*)
> -		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
> -		;;
> -	*-commodore*)
> -		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
> -		;;
> -	*)
> -		;;
> -esac
> -
> -# Decode manufacturer-specific aliases for certain operating systems.
> -
> -if [ x"$os" != x"" ]
> -then
> -case $os in
> -	# First match some system type aliases
> -	# that might get confused with valid system types.
> -	# -solaris* is a basic system type, with this one exception.
> -	-auroraux)
> -		os=-auroraux
> -		;;
> -	-solaris1 | -solaris1.*)
> -		os=`echo $os | sed -e 's|solaris1|sunos4|'`
> -		;;
> -	-solaris)
> -		os=-solaris2
> -		;;
> -	-svr4*)
> -		os=-sysv4
> -		;;
> -	-unixware*)
> -		os=-sysv4.2uw
> -		;;
> -	-gnu/linux*)
> -		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
> -		;;
> -	# First accept the basic system types.
> -	# The portable systems comes first.
> -	# Each alternative MUST END IN A *, to match a version number.
> -	# -sysv* is not here because it comes later, after sysvr4.
> -	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
> -	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
> -	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
> -	      | -sym* | -kopensolaris* \
> -	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
> -	      | -aos* | -aros* \
> -	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
> -	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
> -	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
> -	      | -openbsd* | -solidbsd* \
> -	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
> -	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
> -	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
> -	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
> -	      | -chorusos* | -chorusrdb* | -cegcc* \
> -	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
> -	      | -mingw32* | -linux-gnu* | -linux-android* \
> -	      | -linux-newlib* | -linux-uclibc* \
> -	      | -uxpv* | -beos* | -mpeix* | -udk* \
> -	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
> -	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
> -	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
> -	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
> -	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
> -	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
> -	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
> -	# Remember, each alternative MUST END IN *, to match a version number.
> -		;;
> -	-qnx*)
> -		case $basic_machine in
> -		    x86-* | i*86-*)
> -			;;
> -		    *)
> -			os=-nto$os
> -			;;
> -		esac
> -		;;
> -	-nto-qnx*)
> -		;;
> -	-nto*)
> -		os=`echo $os | sed -e 's|nto|nto-qnx|'`
> -		;;
> -	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
> -	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
> -	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
> -		;;
> -	-mac*)
> -		os=`echo $os | sed -e 's|mac|macos|'`
> -		;;
> -	-linux-dietlibc)
> -		os=-linux-dietlibc
> -		;;
> -	-linux*)
> -		os=`echo $os | sed -e 's|linux|linux-gnu|'`
> -		;;
> -	-sunos5*)
> -		os=`echo $os | sed -e 's|sunos5|solaris2|'`
> -		;;
> -	-sunos6*)
> -		os=`echo $os | sed -e 's|sunos6|solaris3|'`
> -		;;
> -	-opened*)
> -		os=-openedition
> -		;;
> -	-os400*)
> -		os=-os400
> -		;;
> -	-wince*)
> -		os=-wince
> -		;;
> -	-osfrose*)
> -		os=-osfrose
> -		;;
> -	-osf*)
> -		os=-osf
> -		;;
> -	-utek*)
> -		os=-bsd
> -		;;
> -	-dynix*)
> -		os=-bsd
> -		;;
> -	-acis*)
> -		os=-aos
> -		;;
> -	-atheos*)
> -		os=-atheos
> -		;;
> -	-syllable*)
> -		os=-syllable
> -		;;
> -	-386bsd)
> -		os=-bsd
> -		;;
> -	-ctix* | -uts*)
> -		os=-sysv
> -		;;
> -	-nova*)
> -		os=-rtmk-nova
> -		;;
> -	-ns2 )
> -		os=-nextstep2
> -		;;
> -	-nsk*)
> -		os=-nsk
> -		;;
> -	# Preserve the version number of sinix5.
> -	-sinix5.*)
> -		os=`echo $os | sed -e 's|sinix|sysv|'`
> -		;;
> -	-sinix*)
> -		os=-sysv4
> -		;;
> -	-tpf*)
> -		os=-tpf
> -		;;
> -	-triton*)
> -		os=-sysv3
> -		;;
> -	-oss*)
> -		os=-sysv3
> -		;;
> -	-svr4)
> -		os=-sysv4
> -		;;
> -	-svr3)
> -		os=-sysv3
> -		;;
> -	-sysvr4)
> -		os=-sysv4
> -		;;
> -	# This must come after -sysvr4.
> -	-sysv*)
> -		;;
> -	-ose*)
> -		os=-ose
> -		;;
> -	-es1800*)
> -		os=-ose
> -		;;
> -	-xenix)
> -		os=-xenix
> -		;;
> -	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
> -		os=-mint
> -		;;
> -	-aros*)
> -		os=-aros
> -		;;
> -	-kaos*)
> -		os=-kaos
> -		;;
> -	-zvmoe)
> -		os=-zvmoe
> -		;;
> -	-dicos*)
> -		os=-dicos
> -		;;
> -	-nacl*)
> -		;;
> -	-none)
> -		;;
> -	*)
> -		# Get rid of the `-' at the beginning of $os.
> -		os=`echo $os | sed 's/[^-]*-//'`
> -		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
> -		exit 1
> -		;;
> -esac
> -else
> -
> -# Here we handle the default operating systems that come with various machines.
> -# The value should be what the vendor currently ships out the door with their
> -# machine or put another way, the most popular os provided with the machine.
> -
> -# Note that if you're going to try to match "-MANUFACTURER" here (say,
> -# "-sun"), then you have to tell the case statement up towards the top
> -# that MANUFACTURER isn't an operating system.  Otherwise, code above
> -# will signal an error saying that MANUFACTURER isn't an operating
> -# system, and we'll never get to this point.
> -
> -case $basic_machine in
> -	score-*)
> -		os=-elf
> -		;;
> -	spu-*)
> -		os=-elf
> -		;;
> -	*-acorn)
> -		os=-riscix1.2
> -		;;
> -	arm*-rebel)
> -		os=-linux
> -		;;
> -	arm*-semi)
> -		os=-aout
> -		;;
> -	c4x-* | tic4x-*)
> -		os=-coff
> -		;;
> -	tic54x-*)
> -		os=-coff
> -		;;
> -	tic55x-*)
> -		os=-coff
> -		;;
> -	tic6x-*)
> -		os=-coff
> -		;;
> -	# This must come before the *-dec entry.
> -	pdp10-*)
> -		os=-tops20
> -		;;
> -	pdp11-*)
> -		os=-none
> -		;;
> -	*-dec | vax-*)
> -		os=-ultrix4.2
> -		;;
> -	m68*-apollo)
> -		os=-domain
> -		;;
> -	i386-sun)
> -		os=-sunos4.0.2
> -		;;
> -	m68000-sun)
> -		os=-sunos3
> -		# This also exists in the configure program, but was not the
> -		# default.
> -		# os=-sunos4
> -		;;
> -	m68*-cisco)
> -		os=-aout
> -		;;
> -	mep-*)
> -		os=-elf
> -		;;
> -	mips*-cisco)
> -		os=-elf
> -		;;
> -	mips*-*)
> -		os=-elf
> -		;;
> -	or32-*)
> -		os=-coff
> -		;;
> -	*-tti)	# must be before sparc entry or we get the wrong os.
> -		os=-sysv3
> -		;;
> -	sparc-* | *-sun)
> -		os=-sunos4.1.1
> -		;;
> -	*-be)
> -		os=-beos
> -		;;
> -	*-haiku)
> -		os=-haiku
> -		;;
> -	*-ibm)
> -		os=-aix
> -		;;
> -	*-knuth)
> -		os=-mmixware
> -		;;
> -	*-wec)
> -		os=-proelf
> -		;;
> -	*-winbond)
> -		os=-proelf
> -		;;
> -	*-oki)
> -		os=-proelf
> -		;;
> -	*-hp)
> -		os=-hpux
> -		;;
> -	*-hitachi)
> -		os=-hiux
> -		;;
> -	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
> -		os=-sysv
> -		;;
> -	*-cbm)
> -		os=-amigaos
> -		;;
> -	*-dg)
> -		os=-dgux
> -		;;
> -	*-dolphin)
> -		os=-sysv3
> -		;;
> -	m68k-ccur)
> -		os=-rtu
> -		;;
> -	m88k-omron*)
> -		os=-luna
> -		;;
> -	*-next )
> -		os=-nextstep
> -		;;
> -	*-sequent)
> -		os=-ptx
> -		;;
> -	*-crds)
> -		os=-unos
> -		;;
> -	*-ns)
> -		os=-genix
> -		;;
> -	i370-*)
> -		os=-mvs
> -		;;
> -	*-next)
> -		os=-nextstep3
> -		;;
> -	*-gould)
> -		os=-sysv
> -		;;
> -	*-highlevel)
> -		os=-bsd
> -		;;
> -	*-encore)
> -		os=-bsd
> -		;;
> -	*-sgi)
> -		os=-irix
> -		;;
> -	*-siemens)
> -		os=-sysv4
> -		;;
> -	*-masscomp)
> -		os=-rtu
> -		;;
> -	f30[01]-fujitsu | f700-fujitsu)
> -		os=-uxpv
> -		;;
> -	*-rom68k)
> -		os=-coff
> -		;;
> -	*-*bug)
> -		os=-coff
> -		;;
> -	*-apple)
> -		os=-macos
> -		;;
> -	*-atari*)
> -		os=-mint
> -		;;
> -	*)
> -		os=-none
> -		;;
> -esac
> -fi
> -
> -# Here we handle the case where we know the os, and the CPU type, but not the
> -# manufacturer.  We pick the logical manufacturer.
> -vendor=unknown
> -case $basic_machine in
> -	*-unknown)
> -		case $os in
> -			-riscix*)
> -				vendor=acorn
> -				;;
> -			-sunos*)
> -				vendor=sun
> -				;;
> -			-cnk*|-aix*)
> -				vendor=ibm
> -				;;
> -			-beos*)
> -				vendor=be
> -				;;
> -			-hpux*)
> -				vendor=hp
> -				;;
> -			-mpeix*)
> -				vendor=hp
> -				;;
> -			-hiux*)
> -				vendor=hitachi
> -				;;
> -			-unos*)
> -				vendor=crds
> -				;;
> -			-dgux*)
> -				vendor=dg
> -				;;
> -			-luna*)
> -				vendor=omron
> -				;;
> -			-genix*)
> -				vendor=ns
> -				;;
> -			-mvs* | -opened*)
> -				vendor=ibm
> -				;;
> -			-os400*)
> -				vendor=ibm
> -				;;
> -			-ptx*)
> -				vendor=sequent
> -				;;
> -			-tpf*)
> -				vendor=ibm
> -				;;
> -			-vxsim* | -vxworks* | -windiss*)
> -				vendor=wrs
> -				;;
> -			-aux*)
> -				vendor=apple
> -				;;
> -			-hms*)
> -				vendor=hitachi
> -				;;
> -			-mpw* | -macos*)
> -				vendor=apple
> -				;;
> -			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
> -				vendor=atari
> -				;;
> -			-vos*)
> -				vendor=stratus
> -				;;
> -		esac
> -		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
> -		;;
> -esac
> -
> -echo $basic_machine$os
> -exit
> -
> -# Local variables:
> -# eval: (add-hook 'write-file-hooks 'time-stamp)
> -# time-stamp-start: "timestamp='"
> -# time-stamp-format: "%:y-%02m-%02d"
> -# time-stamp-end: "'"
> -# End:
> diff --git a/configure b/configure
> deleted file mode 100755
> index 43a0b1c..0000000
> --- a/configure
> +++ /dev/null
> @@ -1,15246 +0,0 @@
> -#! /bin/sh
> -# Guess values for system-dependent variables and create Makefiles.
> -# Generated by GNU Autoconf 2.68 for fwts 0.1.
> -#
> -# Report bugs to <colin.king@canonical.com>.
> -#
> -#
> -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
> -# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
> -# Foundation, Inc.
> -#
> -#
> -# This configure script is free software; the Free Software Foundation
> -# gives unlimited permission to copy, distribute and modify it.
> -## -------------------- ##
> -## M4sh Initialization. ##
> -## -------------------- ##
> -
> -# Be more Bourne compatible
> -DUALCASE=1; export DUALCASE # for MKS sh
> -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
> -  emulate sh
> -  NULLCMD=:
> -  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
> -  # is contrary to our usage.  Disable this feature.
> -  alias -g '${1+"$@"}'='"$@"'
> -  setopt NO_GLOB_SUBST
> -else
> -  case `(set -o) 2>/dev/null` in #(
> -  *posix*) :
> -    set -o posix ;; #(
> -  *) :
> -     ;;
> -esac
> -fi
> -
> -
> -as_nl='
> -'
> -export as_nl
> -# Printing a long string crashes Solaris 7 /usr/bin/printf.
> -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
> -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
> -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
> -# Prefer a ksh shell builtin over an external printf program on Solaris,
> -# but without wasting forks for bash or zsh.
> -if test -z "$BASH_VERSION$ZSH_VERSION" \
> -    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
> -  as_echo='print -r --'
> -  as_echo_n='print -rn --'
> -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
> -  as_echo='printf %s\n'
> -  as_echo_n='printf %s'
> -else
> -  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
> -    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
> -    as_echo_n='/usr/ucb/echo -n'
> -  else
> -    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
> -    as_echo_n_body='eval
> -      arg=$1;
> -      case $arg in #(
> -      *"$as_nl"*)
> -	expr "X$arg" : "X\\(.*\\)$as_nl";
> -	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
> -      esac;
> -      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
> -    '
> -    export as_echo_n_body
> -    as_echo_n='sh -c $as_echo_n_body as_echo'
> -  fi
> -  export as_echo_body
> -  as_echo='sh -c $as_echo_body as_echo'
> -fi
> -
> -# The user is always right.
> -if test "${PATH_SEPARATOR+set}" != set; then
> -  PATH_SEPARATOR=:
> -  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
> -    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
> -      PATH_SEPARATOR=';'
> -  }
> -fi
> -
> -
> -# IFS
> -# We need space, tab and new line, in precisely that order.  Quoting is
> -# there to prevent editors from complaining about space-tab.
> -# (If _AS_PATH_WALK were called with IFS unset, it would disable word
> -# splitting by setting IFS to empty value.)
> -IFS=" ""	$as_nl"
> -
> -# Find who we are.  Look in the path if we contain no directory separator.
> -as_myself=
> -case $0 in #((
> -  *[\\/]* ) as_myself=$0 ;;
> -  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
> -  done
> -IFS=$as_save_IFS
> -
> -     ;;
> -esac
> -# We did not find ourselves, most probably we were run as `sh COMMAND'
> -# in which case we are not to be found in the path.
> -if test "x$as_myself" = x; then
> -  as_myself=$0
> -fi
> -if test ! -f "$as_myself"; then
> -  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
> -  exit 1
> -fi
> -
> -# Unset variables that we do not need and which cause bugs (e.g. in
> -# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
> -# suppresses any "Segmentation fault" message there.  '((' could
> -# trigger a bug in pdksh 5.2.14.
> -for as_var in BASH_ENV ENV MAIL MAILPATH
> -do eval test x\${$as_var+set} = xset \
> -  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
> -done
> -PS1='$ '
> -PS2='> '
> -PS4='+ '
> -
> -# NLS nuisances.
> -LC_ALL=C
> -export LC_ALL
> -LANGUAGE=C
> -export LANGUAGE
> -
> -# CDPATH.
> -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
> -
> -if test "x$CONFIG_SHELL" = x; then
> -  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
> -  emulate sh
> -  NULLCMD=:
> -  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
> -  # is contrary to our usage.  Disable this feature.
> -  alias -g '\${1+\"\$@\"}'='\"\$@\"'
> -  setopt NO_GLOB_SUBST
> -else
> -  case \`(set -o) 2>/dev/null\` in #(
> -  *posix*) :
> -    set -o posix ;; #(
> -  *) :
> -     ;;
> -esac
> -fi
> -"
> -  as_required="as_fn_return () { (exit \$1); }
> -as_fn_success () { as_fn_return 0; }
> -as_fn_failure () { as_fn_return 1; }
> -as_fn_ret_success () { return 0; }
> -as_fn_ret_failure () { return 1; }
> -
> -exitcode=0
> -as_fn_success || { exitcode=1; echo as_fn_success failed.; }
> -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
> -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
> -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
> -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
> -
> -else
> -  exitcode=1; echo positional parameters were not saved.
> -fi
> -test x\$exitcode = x0 || exit 1"
> -  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
> -  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
> -  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
> -  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
> -
> -  test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
> -    ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
> -    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
> -    ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
> -    PATH=/empty FPATH=/empty; export PATH FPATH
> -    test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
> -      || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1
> -test \$(( 1 + 1 )) = 2 || exit 1"
> -  if (eval "$as_required") 2>/dev/null; then :
> -  as_have_required=yes
> -else
> -  as_have_required=no
> -fi
> -  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
> -
> -else
> -  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -as_found=false
> -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -  as_found=:
> -  case $as_dir in #(
> -	 /*)
> -	   for as_base in sh bash ksh sh5; do
> -	     # Try only shells that exist, to save several forks.
> -	     as_shell=$as_dir/$as_base
> -	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
> -		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
> -  CONFIG_SHELL=$as_shell as_have_required=yes
> -		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
> -  break 2
> -fi
> -fi
> -	   done;;
> -       esac
> -  as_found=false
> -done
> -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
> -	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
> -  CONFIG_SHELL=$SHELL as_have_required=yes
> -fi; }
> -IFS=$as_save_IFS
> -
> -
> -      if test "x$CONFIG_SHELL" != x; then :
> -  # We cannot yet assume a decent shell, so we have to provide a
> -	# neutralization value for shells without unset; and this also
> -	# works around shells that cannot unset nonexistent variables.
> -	# Preserve -v and -x to the replacement shell.
> -	BASH_ENV=/dev/null
> -	ENV=/dev/null
> -	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
> -	export CONFIG_SHELL
> -	case $- in # ((((
> -	  *v*x* | *x*v* ) as_opts=-vx ;;
> -	  *v* ) as_opts=-v ;;
> -	  *x* ) as_opts=-x ;;
> -	  * ) as_opts= ;;
> -	esac
> -	exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
> -fi
> -
> -    if test x$as_have_required = xno; then :
> -  $as_echo "$0: This script requires a shell more modern than all"
> -  $as_echo "$0: the shells that I found on your system."
> -  if test x${ZSH_VERSION+set} = xset ; then
> -    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
> -    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
> -  else
> -    $as_echo "$0: Please tell bug-autoconf@gnu.org and
> -$0: colin.king@canonical.com about your system, including
> -$0: any error possibly output before this message. Then
> -$0: install a modern shell, or manually run the script
> -$0: under such a shell if you do have one."
> -  fi
> -  exit 1
> -fi
> -fi
> -fi
> -SHELL=${CONFIG_SHELL-/bin/sh}
> -export SHELL
> -# Unset more variables known to interfere with behavior of common tools.
> -CLICOLOR_FORCE= GREP_OPTIONS=
> -unset CLICOLOR_FORCE GREP_OPTIONS
> -
> -## --------------------- ##
> -## M4sh Shell Functions. ##
> -## --------------------- ##
> -# as_fn_unset VAR
> -# ---------------
> -# Portably unset VAR.
> -as_fn_unset ()
> -{
> -  { eval $1=; unset $1;}
> -}
> -as_unset=as_fn_unset
> -
> -# as_fn_set_status STATUS
> -# -----------------------
> -# Set $? to STATUS, without forking.
> -as_fn_set_status ()
> -{
> -  return $1
> -} # as_fn_set_status
> -
> -# as_fn_exit STATUS
> -# -----------------
> -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
> -as_fn_exit ()
> -{
> -  set +e
> -  as_fn_set_status $1
> -  exit $1
> -} # as_fn_exit
> -
> -# as_fn_mkdir_p
> -# -------------
> -# Create "$as_dir" as a directory, including parents if necessary.
> -as_fn_mkdir_p ()
> -{
> -
> -  case $as_dir in #(
> -  -*) as_dir=./$as_dir;;
> -  esac
> -  test -d "$as_dir" || eval $as_mkdir_p || {
> -    as_dirs=
> -    while :; do
> -      case $as_dir in #(
> -      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
> -      *) as_qdir=$as_dir;;
> -      esac
> -      as_dirs="'$as_qdir' $as_dirs"
> -      as_dir=`$as_dirname -- "$as_dir" ||
> -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
> -	 X"$as_dir" : 'X\(//\)[^/]' \| \
> -	 X"$as_dir" : 'X\(//\)$' \| \
> -	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
> -$as_echo X"$as_dir" |
> -    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
> -	    s//\1/
> -	    q
> -	  }
> -	  /^X\(\/\/\)[^/].*/{
> -	    s//\1/
> -	    q
> -	  }
> -	  /^X\(\/\/\)$/{
> -	    s//\1/
> -	    q
> -	  }
> -	  /^X\(\/\).*/{
> -	    s//\1/
> -	    q
> -	  }
> -	  s/.*/./; q'`
> -      test -d "$as_dir" && break
> -    done
> -    test -z "$as_dirs" || eval "mkdir $as_dirs"
> -  } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
> -
> -
> -} # as_fn_mkdir_p
> -# as_fn_append VAR VALUE
> -# ----------------------
> -# Append the text in VALUE to the end of the definition contained in VAR. Take
> -# advantage of any shell optimizations that allow amortized linear growth over
> -# repeated appends, instead of the typical quadratic growth present in naive
> -# implementations.
> -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
> -  eval 'as_fn_append ()
> -  {
> -    eval $1+=\$2
> -  }'
> -else
> -  as_fn_append ()
> -  {
> -    eval $1=\$$1\$2
> -  }
> -fi # as_fn_append
> -
> -# as_fn_arith ARG...
> -# ------------------
> -# Perform arithmetic evaluation on the ARGs, and store the result in the
> -# global $as_val. Take advantage of shells that can avoid forks. The arguments
> -# must be portable across $(()) and expr.
> -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
> -  eval 'as_fn_arith ()
> -  {
> -    as_val=$(( $* ))
> -  }'
> -else
> -  as_fn_arith ()
> -  {
> -    as_val=`expr "$@" || test $? -eq 1`
> -  }
> -fi # as_fn_arith
> -
> -
> -# as_fn_error STATUS ERROR [LINENO LOG_FD]
> -# ----------------------------------------
> -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
> -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
> -# script with STATUS, using 1 if that was 0.
> -as_fn_error ()
> -{
> -  as_status=$1; test $as_status -eq 0 && as_status=1
> -  if test "$4"; then
> -    as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
> -    $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
> -  fi
> -  $as_echo "$as_me: error: $2" >&2
> -  as_fn_exit $as_status
> -} # as_fn_error
> -
> -if expr a : '\(a\)' >/dev/null 2>&1 &&
> -   test "X`expr 00001 : '.*\(...\)'`" = X001; then
> -  as_expr=expr
> -else
> -  as_expr=false
> -fi
> -
> -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
> -  as_basename=basename
> -else
> -  as_basename=false
> -fi
> -
> -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
> -  as_dirname=dirname
> -else
> -  as_dirname=false
> -fi
> -
> -as_me=`$as_basename -- "$0" ||
> -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
> -	 X"$0" : 'X\(//\)$' \| \
> -	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
> -$as_echo X/"$0" |
> -    sed '/^.*\/\([^/][^/]*\)\/*$/{
> -	    s//\1/
> -	    q
> -	  }
> -	  /^X\/\(\/\/\)$/{
> -	    s//\1/
> -	    q
> -	  }
> -	  /^X\/\(\/\).*/{
> -	    s//\1/
> -	    q
> -	  }
> -	  s/.*/./; q'`
> -
> -# Avoid depending upon Character Ranges.
> -as_cr_letters='abcdefghijklmnopqrstuvwxyz'
> -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
> -as_cr_Letters=$as_cr_letters$as_cr_LETTERS
> -as_cr_digits='0123456789'
> -as_cr_alnum=$as_cr_Letters$as_cr_digits
> -
> -
> -  as_lineno_1=$LINENO as_lineno_1a=$LINENO
> -  as_lineno_2=$LINENO as_lineno_2a=$LINENO
> -  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
> -  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
> -  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
> -  sed -n '
> -    p
> -    /[$]LINENO/=
> -  ' <$as_myself |
> -    sed '
> -      s/[$]LINENO.*/&-/
> -      t lineno
> -      b
> -      :lineno
> -      N
> -      :loop
> -      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
> -      t loop
> -      s/-\n.*//
> -    ' >$as_me.lineno &&
> -  chmod +x "$as_me.lineno" ||
> -    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
> -
> -  # Don't try to exec as it changes $[0], causing all sort of problems
> -  # (the dirname of $[0] is not the place where we might find the
> -  # original and so on.  Autoconf is especially sensitive to this).
> -  . "./$as_me.lineno"
> -  # Exit status is that of the last command.
> -  exit
> -}
> -
> -ECHO_C= ECHO_N= ECHO_T=
> -case `echo -n x` in #(((((
> --n*)
> -  case `echo 'xy\c'` in
> -  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
> -  xy)  ECHO_C='\c';;
> -  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
> -       ECHO_T='	';;
> -  esac;;
> -*)
> -  ECHO_N='-n';;
> -esac
> -
> -rm -f conf$$ conf$$.exe conf$$.file
> -if test -d conf$$.dir; then
> -  rm -f conf$$.dir/conf$$.file
> -else
> -  rm -f conf$$.dir
> -  mkdir conf$$.dir 2>/dev/null
> -fi
> -if (echo >conf$$.file) 2>/dev/null; then
> -  if ln -s conf$$.file conf$$ 2>/dev/null; then
> -    as_ln_s='ln -s'
> -    # ... but there are two gotchas:
> -    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
> -    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
> -    # In both cases, we have to default to `cp -p'.
> -    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
> -      as_ln_s='cp -p'
> -  elif ln conf$$.file conf$$ 2>/dev/null; then
> -    as_ln_s=ln
> -  else
> -    as_ln_s='cp -p'
> -  fi
> -else
> -  as_ln_s='cp -p'
> -fi
> -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
> -rmdir conf$$.dir 2>/dev/null
> -
> -if mkdir -p . 2>/dev/null; then
> -  as_mkdir_p='mkdir -p "$as_dir"'
> -else
> -  test -d ./-p && rmdir ./-p
> -  as_mkdir_p=false
> -fi
> -
> -if test -x / >/dev/null 2>&1; then
> -  as_test_x='test -x'
> -else
> -  if ls -dL / >/dev/null 2>&1; then
> -    as_ls_L_option=L
> -  else
> -    as_ls_L_option=
> -  fi
> -  as_test_x='
> -    eval sh -c '\''
> -      if test -d "$1"; then
> -	test -d "$1/.";
> -      else
> -	case $1 in #(
> -	-*)set "./$1";;
> -	esac;
> -	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
> -	???[sx]*):;;*)false;;esac;fi
> -    '\'' sh
> -  '
> -fi
> -as_executable_p=$as_test_x
> -
> -# Sed expression to map a string onto a valid CPP name.
> -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
> -
> -# Sed expression to map a string onto a valid variable name.
> -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
> -
> -SHELL=${CONFIG_SHELL-/bin/sh}
> -
> -
> -test -n "$DJDIR" || exec 7<&0 </dev/null
> -exec 6>&1
> -
> -# Name of the host.
> -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
> -# so uname gets run too.
> -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
> -
> -#
> -# Initializations.
> -#
> -ac_default_prefix=/usr/local
> -ac_clean_files=
> -ac_config_libobj_dir=.
> -LIBOBJS=
> -cross_compiling=no
> -subdirs=
> -MFLAGS=
> -MAKEFLAGS=
> -
> -# Identity of this package.
> -PACKAGE_NAME='fwts'
> -PACKAGE_TARNAME='fwts'
> -PACKAGE_VERSION='0.1'
> -PACKAGE_STRING='fwts 0.1'
> -PACKAGE_BUGREPORT='colin.king@canonical.com'
> -PACKAGE_URL=''
> -
> -# Factoring default headers for most tests.
> -ac_includes_default="\
> -#include <stdio.h>
> -#ifdef HAVE_SYS_TYPES_H
> -# include <sys/types.h>
> -#endif
> -#ifdef HAVE_SYS_STAT_H
> -# include <sys/stat.h>
> -#endif
> -#ifdef STDC_HEADERS
> -# include <stdlib.h>
> -# include <stddef.h>
> -#else
> -# ifdef HAVE_STDLIB_H
> -#  include <stdlib.h>
> -# endif
> -#endif
> -#ifdef HAVE_STRING_H
> -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
> -#  include <memory.h>
> -# endif
> -# include <string.h>
> -#endif
> -#ifdef HAVE_STRINGS_H
> -# include <strings.h>
> -#endif
> -#ifdef HAVE_INTTYPES_H
> -# include <inttypes.h>
> -#endif
> -#ifdef HAVE_STDINT_H
> -# include <stdint.h>
> -#endif
> -#ifdef HAVE_UNISTD_H
> -# include <unistd.h>
> -#endif"
> -
> -ac_header_list=
> -ac_subst_vars='am__EXEEXT_FALSE
> -am__EXEEXT_TRUE
> -LTLIBOBJS
> -LIBOBJS
> -CPP
> -OTOOL64
> -OTOOL
> -LIPO
> -NMEDIT
> -DSYMUTIL
> -MANIFEST_TOOL
> -RANLIB
> -ac_ct_AR
> -AR
> -DLLTOOL
> -OBJDUMP
> -LN_S
> -NM
> -ac_ct_DUMPBIN
> -DUMPBIN
> -LD
> -FGREP
> -EGREP
> -GREP
> -SED
> -LIBTOOL
> -YFLAGS
> -YACC
> -LEXLIB
> -LEX_OUTPUT_ROOT
> -LEX
> -am__fastdepCC_FALSE
> -am__fastdepCC_TRUE
> -CCDEPMODE
> -AMDEPBACKSLASH
> -AMDEP_FALSE
> -AMDEP_TRUE
> -am__quote
> -am__include
> -DEPDIR
> -OBJEXT
> -EXEEXT
> -ac_ct_CC
> -CPPFLAGS
> -LDFLAGS
> -CFLAGS
> -CC
> -host_os
> -host_vendor
> -host_cpu
> -host
> -build_os
> -build_vendor
> -build_cpu
> -build
> -am__untar
> -am__tar
> -AMTAR
> -am__leading_dot
> -SET_MAKE
> -AWK
> -mkdir_p
> -MKDIR_P
> -INSTALL_STRIP_PROGRAM
> -STRIP
> -install_sh
> -MAKEINFO
> -AUTOHEADER
> -AUTOMAKE
> -AUTOCONF
> -ACLOCAL
> -VERSION
> -PACKAGE
> -CYGPATH_W
> -am__isrc
> -INSTALL_DATA
> -INSTALL_SCRIPT
> -INSTALL_PROGRAM
> -target_alias
> -host_alias
> -build_alias
> -LIBS
> -ECHO_T
> -ECHO_N
> -ECHO_C
> -DEFS
> -mandir
> -localedir
> -libdir
> -psdir
> -pdfdir
> -dvidir
> -htmldir
> -infodir
> -docdir
> -oldincludedir
> -includedir
> -localstatedir
> -sharedstatedir
> -sysconfdir
> -datadir
> -datarootdir
> -libexecdir
> -sbindir
> -bindir
> -program_transform_name
> -prefix
> -exec_prefix
> -PACKAGE_URL
> -PACKAGE_BUGREPORT
> -PACKAGE_STRING
> -PACKAGE_VERSION
> -PACKAGE_TARNAME
> -PACKAGE_NAME
> -PATH_SEPARATOR
> -SHELL'
> -ac_subst_files=''
> -ac_user_opts='
> -enable_option_checking
> -enable_dependency_tracking
> -enable_shared
> -enable_static
> -with_pic
> -enable_fast_install
> -with_gnu_ld
> -with_sysroot
> -enable_libtool_lock
> -'
> -      ac_precious_vars='build_alias
> -host_alias
> -target_alias
> -CC
> -CFLAGS
> -LDFLAGS
> -LIBS
> -CPPFLAGS
> -YACC
> -YFLAGS
> -CPP'
> -
> -
> -# Initialize some variables set by options.
> -ac_init_help=
> -ac_init_version=false
> -ac_unrecognized_opts=
> -ac_unrecognized_sep=
> -# The variables have the same names as the options, with
> -# dashes changed to underlines.
> -cache_file=/dev/null
> -exec_prefix=NONE
> -no_create=
> -no_recursion=
> -prefix=NONE
> -program_prefix=NONE
> -program_suffix=NONE
> -program_transform_name=s,x,x,
> -silent=
> -site=
> -srcdir=
> -verbose=
> -x_includes=NONE
> -x_libraries=NONE
> -
> -# Installation directory options.
> -# These are left unexpanded so users can "make install exec_prefix=/foo"
> -# and all the variables that are supposed to be based on exec_prefix
> -# by default will actually change.
> -# Use braces instead of parens because sh, perl, etc. also accept them.
> -# (The list follows the same order as the GNU Coding Standards.)
> -bindir='${exec_prefix}/bin'
> -sbindir='${exec_prefix}/sbin'
> -libexecdir='${exec_prefix}/libexec'
> -datarootdir='${prefix}/share'
> -datadir='${datarootdir}'
> -sysconfdir='${prefix}/etc'
> -sharedstatedir='${prefix}/com'
> -localstatedir='${prefix}/var'
> -includedir='${prefix}/include'
> -oldincludedir='/usr/include'
> -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
> -infodir='${datarootdir}/info'
> -htmldir='${docdir}'
> -dvidir='${docdir}'
> -pdfdir='${docdir}'
> -psdir='${docdir}'
> -libdir='${exec_prefix}/lib'
> -localedir='${datarootdir}/locale'
> -mandir='${datarootdir}/man'
> -
> -ac_prev=
> -ac_dashdash=
> -for ac_option
> -do
> -  # If the previous option needs an argument, assign it.
> -  if test -n "$ac_prev"; then
> -    eval $ac_prev=\$ac_option
> -    ac_prev=
> -    continue
> -  fi
> -
> -  case $ac_option in
> -  *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
> -  *=)   ac_optarg= ;;
> -  *)    ac_optarg=yes ;;
> -  esac
> -
> -  # Accept the important Cygnus configure options, so we can diagnose typos.
> -
> -  case $ac_dashdash$ac_option in
> -  --)
> -    ac_dashdash=yes ;;
> -
> -  -bindir | --bindir | --bindi | --bind | --bin | --bi)
> -    ac_prev=bindir ;;
> -  -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
> -    bindir=$ac_optarg ;;
> -
> -  -build | --build | --buil | --bui | --bu)
> -    ac_prev=build_alias ;;
> -  -build=* | --build=* | --buil=* | --bui=* | --bu=*)
> -    build_alias=$ac_optarg ;;
> -
> -  -cache-file | --cache-file | --cache-fil | --cache-fi \
> -  | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
> -    ac_prev=cache_file ;;
> -  -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
> -  | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
> -    cache_file=$ac_optarg ;;
> -
> -  --config-cache | -C)
> -    cache_file=config.cache ;;
> -
> -  -datadir | --datadir | --datadi | --datad)
> -    ac_prev=datadir ;;
> -  -datadir=* | --datadir=* | --datadi=* | --datad=*)
> -    datadir=$ac_optarg ;;
> -
> -  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
> -  | --dataroo | --dataro | --datar)
> -    ac_prev=datarootdir ;;
> -  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
> -  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
> -    datarootdir=$ac_optarg ;;
> -
> -  -disable-* | --disable-*)
> -    ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
> -    # Reject names that are not valid shell variable names.
> -    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
> -      as_fn_error $? "invalid feature name: $ac_useropt"
> -    ac_useropt_orig=$ac_useropt
> -    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
> -    case $ac_user_opts in
> -      *"
> -"enable_$ac_useropt"
> -"*) ;;
> -      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
> -	 ac_unrecognized_sep=', ';;
> -    esac
> -    eval enable_$ac_useropt=no ;;
> -
> -  -docdir | --docdir | --docdi | --doc | --do)
> -    ac_prev=docdir ;;
> -  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
> -    docdir=$ac_optarg ;;
> -
> -  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
> -    ac_prev=dvidir ;;
> -  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
> -    dvidir=$ac_optarg ;;
> -
> -  -enable-* | --enable-*)
> -    ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
> -    # Reject names that are not valid shell variable names.
> -    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
> -      as_fn_error $? "invalid feature name: $ac_useropt"
> -    ac_useropt_orig=$ac_useropt
> -    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
> -    case $ac_user_opts in
> -      *"
> -"enable_$ac_useropt"
> -"*) ;;
> -      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
> -	 ac_unrecognized_sep=', ';;
> -    esac
> -    eval enable_$ac_useropt=\$ac_optarg ;;
> -
> -  -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
> -  | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
> -  | --exec | --exe | --ex)
> -    ac_prev=exec_prefix ;;
> -  -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
> -  | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
> -  | --exec=* | --exe=* | --ex=*)
> -    exec_prefix=$ac_optarg ;;
> -
> -  -gas | --gas | --ga | --g)
> -    # Obsolete; use --with-gas.
> -    with_gas=yes ;;
> -
> -  -help | --help | --hel | --he | -h)
> -    ac_init_help=long ;;
> -  -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
> -    ac_init_help=recursive ;;
> -  -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
> -    ac_init_help=short ;;
> -
> -  -host | --host | --hos | --ho)
> -    ac_prev=host_alias ;;
> -  -host=* | --host=* | --hos=* | --ho=*)
> -    host_alias=$ac_optarg ;;
> -
> -  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
> -    ac_prev=htmldir ;;
> -  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
> -  | --ht=*)
> -    htmldir=$ac_optarg ;;
> -
> -  -includedir | --includedir | --includedi | --included | --include \
> -  | --includ | --inclu | --incl | --inc)
> -    ac_prev=includedir ;;
> -  -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
> -  | --includ=* | --inclu=* | --incl=* | --inc=*)
> -    includedir=$ac_optarg ;;
> -
> -  -infodir | --infodir | --infodi | --infod | --info | --inf)
> -    ac_prev=infodir ;;
> -  -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
> -    infodir=$ac_optarg ;;
> -
> -  -libdir | --libdir | --libdi | --libd)
> -    ac_prev=libdir ;;
> -  -libdir=* | --libdir=* | --libdi=* | --libd=*)
> -    libdir=$ac_optarg ;;
> -
> -  -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
> -  | --libexe | --libex | --libe)
> -    ac_prev=libexecdir ;;
> -  -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
> -  | --libexe=* | --libex=* | --libe=*)
> -    libexecdir=$ac_optarg ;;
> -
> -  -localedir | --localedir | --localedi | --localed | --locale)
> -    ac_prev=localedir ;;
> -  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
> -    localedir=$ac_optarg ;;
> -
> -  -localstatedir | --localstatedir | --localstatedi | --localstated \
> -  | --localstate | --localstat | --localsta | --localst | --locals)
> -    ac_prev=localstatedir ;;
> -  -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
> -  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
> -    localstatedir=$ac_optarg ;;
> -
> -  -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
> -    ac_prev=mandir ;;
> -  -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
> -    mandir=$ac_optarg ;;
> -
> -  -nfp | --nfp | --nf)
> -    # Obsolete; use --without-fp.
> -    with_fp=no ;;
> -
> -  -no-create | --no-create | --no-creat | --no-crea | --no-cre \
> -  | --no-cr | --no-c | -n)
> -    no_create=yes ;;
> -
> -  -no-recursion | --no-recursion | --no-recursio | --no-recursi \
> -  | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
> -    no_recursion=yes ;;
> -
> -  -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
> -  | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
> -  | --oldin | --oldi | --old | --ol | --o)
> -    ac_prev=oldincludedir ;;
> -  -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
> -  | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
> -  | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
> -    oldincludedir=$ac_optarg ;;
> -
> -  -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
> -    ac_prev=prefix ;;
> -  -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
> -    prefix=$ac_optarg ;;
> -
> -  -program-prefix | --program-prefix | --program-prefi | --program-pref \
> -  | --program-pre | --program-pr | --program-p)
> -    ac_prev=program_prefix ;;
> -  -program-prefix=* | --program-prefix=* | --program-prefi=* \
> -  | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
> -    program_prefix=$ac_optarg ;;
> -
> -  -program-suffix | --program-suffix | --program-suffi | --program-suff \
> -  | --program-suf | --program-su | --program-s)
> -    ac_prev=program_suffix ;;
> -  -program-suffix=* | --program-suffix=* | --program-suffi=* \
> -  | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
> -    program_suffix=$ac_optarg ;;
> -
> -  -program-transform-name | --program-transform-name \
> -  | --program-transform-nam | --program-transform-na \
> -  | --program-transform-n | --program-transform- \
> -  | --program-transform | --program-transfor \
> -  | --program-transfo | --program-transf \
> -  | --program-trans | --program-tran \
> -  | --progr-tra | --program-tr | --program-t)
> -    ac_prev=program_transform_name ;;
> -  -program-transform-name=* | --program-transform-name=* \
> -  | --program-transform-nam=* | --program-transform-na=* \
> -  | --program-transform-n=* | --program-transform-=* \
> -  | --program-transform=* | --program-transfor=* \
> -  | --program-transfo=* | --program-transf=* \
> -  | --program-trans=* | --program-tran=* \
> -  | --progr-tra=* | --program-tr=* | --program-t=*)
> -    program_transform_name=$ac_optarg ;;
> -
> -  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
> -    ac_prev=pdfdir ;;
> -  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
> -    pdfdir=$ac_optarg ;;
> -
> -  -psdir | --psdir | --psdi | --psd | --ps)
> -    ac_prev=psdir ;;
> -  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
> -    psdir=$ac_optarg ;;
> -
> -  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
> -  | -silent | --silent | --silen | --sile | --sil)
> -    silent=yes ;;
> -
> -  -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
> -    ac_prev=sbindir ;;
> -  -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
> -  | --sbi=* | --sb=*)
> -    sbindir=$ac_optarg ;;
> -
> -  -sharedstatedir | --sharedstatedir | --sharedstatedi \
> -  | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
> -  | --sharedst | --shareds | --shared | --share | --shar \
> -  | --sha | --sh)
> -    ac_prev=sharedstatedir ;;
> -  -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
> -  | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
> -  | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
> -  | --sha=* | --sh=*)
> -    sharedstatedir=$ac_optarg ;;
> -
> -  -site | --site | --sit)
> -    ac_prev=site ;;
> -  -site=* | --site=* | --sit=*)
> -    site=$ac_optarg ;;
> -
> -  -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
> -    ac_prev=srcdir ;;
> -  -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
> -    srcdir=$ac_optarg ;;
> -
> -  -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
> -  | --syscon | --sysco | --sysc | --sys | --sy)
> -    ac_prev=sysconfdir ;;
> -  -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
> -  | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
> -    sysconfdir=$ac_optarg ;;
> -
> -  -target | --target | --targe | --targ | --tar | --ta | --t)
> -    ac_prev=target_alias ;;
> -  -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
> -    target_alias=$ac_optarg ;;
> -
> -  -v | -verbose | --verbose | --verbos | --verbo | --verb)
> -    verbose=yes ;;
> -
> -  -version | --version | --versio | --versi | --vers | -V)
> -    ac_init_version=: ;;
> -
> -  -with-* | --with-*)
> -    ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
> -    # Reject names that are not valid shell variable names.
> -    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
> -      as_fn_error $? "invalid package name: $ac_useropt"
> -    ac_useropt_orig=$ac_useropt
> -    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
> -    case $ac_user_opts in
> -      *"
> -"with_$ac_useropt"
> -"*) ;;
> -      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
> -	 ac_unrecognized_sep=', ';;
> -    esac
> -    eval with_$ac_useropt=\$ac_optarg ;;
> -
> -  -without-* | --without-*)
> -    ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
> -    # Reject names that are not valid shell variable names.
> -    expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
> -      as_fn_error $? "invalid package name: $ac_useropt"
> -    ac_useropt_orig=$ac_useropt
> -    ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
> -    case $ac_user_opts in
> -      *"
> -"with_$ac_useropt"
> -"*) ;;
> -      *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
> -	 ac_unrecognized_sep=', ';;
> -    esac
> -    eval with_$ac_useropt=no ;;
> -
> -  --x)
> -    # Obsolete; use --with-x.
> -    with_x=yes ;;
> -
> -  -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
> -  | --x-incl | --x-inc | --x-in | --x-i)
> -    ac_prev=x_includes ;;
> -  -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
> -  | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
> -    x_includes=$ac_optarg ;;
> -
> -  -x-libraries | --x-libraries | --x-librarie | --x-librari \
> -  | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
> -    ac_prev=x_libraries ;;
> -  -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
> -  | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
> -    x_libraries=$ac_optarg ;;
> -
> -  -*) as_fn_error $? "unrecognized option: \`$ac_option'
> -Try \`$0 --help' for more information"
> -    ;;
> -
> -  *=*)
> -    ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
> -    # Reject names that are not valid shell variable names.
> -    case $ac_envvar in #(
> -      '' | [0-9]* | *[!_$as_cr_alnum]* )
> -      as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
> -    esac
> -    eval $ac_envvar=\$ac_optarg
> -    export $ac_envvar ;;
> -
> -  *)
> -    # FIXME: should be removed in autoconf 3.0.
> -    $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
> -    expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
> -      $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
> -    : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
> -    ;;
> -
> -  esac
> -done
> -
> -if test -n "$ac_prev"; then
> -  ac_option=--`echo $ac_prev | sed 's/_/-/g'`
> -  as_fn_error $? "missing argument to $ac_option"
> -fi
> -
> -if test -n "$ac_unrecognized_opts"; then
> -  case $enable_option_checking in
> -    no) ;;
> -    fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
> -    *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
> -  esac
> -fi
> -
> -# Check all directory arguments for consistency.
> -for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
> -		datadir sysconfdir sharedstatedir localstatedir includedir \
> -		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
> -		libdir localedir mandir
> -do
> -  eval ac_val=\$$ac_var
> -  # Remove trailing slashes.
> -  case $ac_val in
> -    */ )
> -      ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
> -      eval $ac_var=\$ac_val;;
> -  esac
> -  # Be sure to have absolute directory names.
> -  case $ac_val in
> -    [\\/$]* | ?:[\\/]* )  continue;;
> -    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
> -  esac
> -  as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
> -done
> -
> -# There might be people who depend on the old broken behavior: `$host'
> -# used to hold the argument of --host etc.
> -# FIXME: To remove some day.
> -build=$build_alias
> -host=$host_alias
> -target=$target_alias
> -
> -# FIXME: To remove some day.
> -if test "x$host_alias" != x; then
> -  if test "x$build_alias" = x; then
> -    cross_compiling=maybe
> -    $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
> -    If a cross compiler is detected then cross compile mode will be used" >&2
> -  elif test "x$build_alias" != "x$host_alias"; then
> -    cross_compiling=yes
> -  fi
> -fi
> -
> -ac_tool_prefix=
> -test -n "$host_alias" && ac_tool_prefix=$host_alias-
> -
> -test "$silent" = yes && exec 6>/dev/null
> -
> -
> -ac_pwd=`pwd` && test -n "$ac_pwd" &&
> -ac_ls_di=`ls -di .` &&
> -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
> -  as_fn_error $? "working directory cannot be determined"
> -test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
> -  as_fn_error $? "pwd does not report name of working directory"
> -
> -
> -# Find the source files, if location was not specified.
> -if test -z "$srcdir"; then
> -  ac_srcdir_defaulted=yes
> -  # Try the directory containing this script, then the parent directory.
> -  ac_confdir=`$as_dirname -- "$as_myself" ||
> -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
> -	 X"$as_myself" : 'X\(//\)[^/]' \| \
> -	 X"$as_myself" : 'X\(//\)$' \| \
> -	 X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
> -$as_echo X"$as_myself" |
> -    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
> -	    s//\1/
> -	    q
> -	  }
> -	  /^X\(\/\/\)[^/].*/{
> -	    s//\1/
> -	    q
> -	  }
> -	  /^X\(\/\/\)$/{
> -	    s//\1/
> -	    q
> -	  }
> -	  /^X\(\/\).*/{
> -	    s//\1/
> -	    q
> -	  }
> -	  s/.*/./; q'`
> -  srcdir=$ac_confdir
> -  if test ! -r "$srcdir/$ac_unique_file"; then
> -    srcdir=..
> -  fi
> -else
> -  ac_srcdir_defaulted=no
> -fi
> -if test ! -r "$srcdir/$ac_unique_file"; then
> -  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
> -  as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
> -fi
> -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
> -ac_abs_confdir=`(
> -	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
> -	pwd)`
> -# When building in place, set srcdir=.
> -if test "$ac_abs_confdir" = "$ac_pwd"; then
> -  srcdir=.
> -fi
> -# Remove unnecessary trailing slashes from srcdir.
> -# Double slashes in file names in object file debugging info
> -# mess up M-x gdb in Emacs.
> -case $srcdir in
> -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
> -esac
> -for ac_var in $ac_precious_vars; do
> -  eval ac_env_${ac_var}_set=\${${ac_var}+set}
> -  eval ac_env_${ac_var}_value=\$${ac_var}
> -  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
> -  eval ac_cv_env_${ac_var}_value=\$${ac_var}
> -done
> -
> -#
> -# Report the --help message.
> -#
> -if test "$ac_init_help" = "long"; then
> -  # Omit some internal or obsolete options to make the list less imposing.
> -  # This message is too long to be a string in the A/UX 3.1 sh.
> -  cat <<_ACEOF
> -\`configure' configures fwts 0.1 to adapt to many kinds of systems.
> -
> -Usage: $0 [OPTION]... [VAR=VALUE]...
> -
> -To assign environment variables (e.g., CC, CFLAGS...), specify them as
> -VAR=VALUE.  See below for descriptions of some of the useful variables.
> -
> -Defaults for the options are specified in brackets.
> -
> -Configuration:
> -  -h, --help              display this help and exit
> -      --help=short        display options specific to this package
> -      --help=recursive    display the short help of all the included packages
> -  -V, --version           display version information and exit
> -  -q, --quiet, --silent   do not print \`checking ...' messages
> -      --cache-file=FILE   cache test results in FILE [disabled]
> -  -C, --config-cache      alias for \`--cache-file=config.cache'
> -  -n, --no-create         do not create output files
> -      --srcdir=DIR        find the sources in DIR [configure dir or \`..']
> -
> -Installation directories:
> -  --prefix=PREFIX         install architecture-independent files in PREFIX
> -                          [$ac_default_prefix]
> -  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
> -                          [PREFIX]
> -
> -By default, \`make install' will install all the files in
> -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc.  You can specify
> -an installation prefix other than \`$ac_default_prefix' using \`--prefix',
> -for instance \`--prefix=\$HOME'.
> -
> -For better control, use the options below.
> -
> -Fine tuning of the installation directories:
> -  --bindir=DIR            user executables [EPREFIX/bin]
> -  --sbindir=DIR           system admin executables [EPREFIX/sbin]
> -  --libexecdir=DIR        program executables [EPREFIX/libexec]
> -  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
> -  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
> -  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
> -  --libdir=DIR            object code libraries [EPREFIX/lib]
> -  --includedir=DIR        C header files [PREFIX/include]
> -  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
> -  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
> -  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
> -  --infodir=DIR           info documentation [DATAROOTDIR/info]
> -  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
> -  --mandir=DIR            man documentation [DATAROOTDIR/man]
> -  --docdir=DIR            documentation root [DATAROOTDIR/doc/fwts]
> -  --htmldir=DIR           html documentation [DOCDIR]
> -  --dvidir=DIR            dvi documentation [DOCDIR]
> -  --pdfdir=DIR            pdf documentation [DOCDIR]
> -  --psdir=DIR             ps documentation [DOCDIR]
> -_ACEOF
> -
> -  cat <<\_ACEOF
> -
> -Program names:
> -  --program-prefix=PREFIX            prepend PREFIX to installed program names
> -  --program-suffix=SUFFIX            append SUFFIX to installed program names
> -  --program-transform-name=PROGRAM   run sed PROGRAM on installed program names
> -
> -System types:
> -  --build=BUILD     configure for building on BUILD [guessed]
> -  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
> -_ACEOF
> -fi
> -
> -if test -n "$ac_init_help"; then
> -  case $ac_init_help in
> -     short | recursive ) echo "Configuration of fwts 0.1:";;
> -   esac
> -  cat <<\_ACEOF
> -
> -Optional Features:
> -  --disable-option-checking  ignore unrecognized --enable/--with options
> -  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
> -  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
> -  --disable-dependency-tracking  speeds up one-time build
> -  --enable-dependency-tracking   do not reject slow dependency extractors
> -  --enable-shared[=PKGS]  build shared libraries [default=yes]
> -  --enable-static[=PKGS]  build static libraries [default=yes]
> -  --enable-fast-install[=PKGS]
> -                          optimize for fast installation [default=yes]
> -  --disable-libtool-lock  avoid locking (might break parallel builds)
> -
> -Optional Packages:
> -  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
> -  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
> -  --with-pic              try to use only PIC/non-PIC objects [default=use
> -                          both]
> -  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
> -  --with-sysroot=DIR Search for dependent libraries within DIR
> -                        (or the compiler's sysroot if not specified).
> -
> -Some influential environment variables:
> -  CC          C compiler command
> -  CFLAGS      C compiler flags
> -  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
> -              nonstandard directory <lib dir>
> -  LIBS        libraries to pass to the linker, e.g. -l<library>
> -  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
> -              you have headers in a nonstandard directory <include dir>
> -  YACC        The `Yet Another Compiler Compiler' implementation to use.
> -              Defaults to the first program found out of: `bison -y', `byacc',
> -              `yacc'.
> -  YFLAGS      The list of arguments that will be passed by default to $YACC.
> -              This script will default YFLAGS to the empty string to avoid a
> -              default value of `-d' given by some make applications.
> -  CPP         C preprocessor
> -
> -Use these variables to override the choices made by `configure' or to help
> -it to find libraries and programs with nonstandard names/locations.
> -
> -Report bugs to <colin.king@canonical.com>.
> -_ACEOF
> -ac_status=$?
> -fi
> -
> -if test "$ac_init_help" = "recursive"; then
> -  # If there are subdirs, report their specific --help.
> -  for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
> -    test -d "$ac_dir" ||
> -      { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
> -      continue
> -    ac_builddir=.
> -
> -case "$ac_dir" in
> -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
> -*)
> -  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
> -  # A ".." for each directory in $ac_dir_suffix.
> -  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
> -  case $ac_top_builddir_sub in
> -  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
> -  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
> -  esac ;;
> -esac
> -ac_abs_top_builddir=$ac_pwd
> -ac_abs_builddir=$ac_pwd$ac_dir_suffix
> -# for backward compatibility:
> -ac_top_builddir=$ac_top_build_prefix
> -
> -case $srcdir in
> -  .)  # We are building in place.
> -    ac_srcdir=.
> -    ac_top_srcdir=$ac_top_builddir_sub
> -    ac_abs_top_srcdir=$ac_pwd ;;
> -  [\\/]* | ?:[\\/]* )  # Absolute name.
> -    ac_srcdir=$srcdir$ac_dir_suffix;
> -    ac_top_srcdir=$srcdir
> -    ac_abs_top_srcdir=$srcdir ;;
> -  *) # Relative name.
> -    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
> -    ac_top_srcdir=$ac_top_build_prefix$srcdir
> -    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
> -esac
> -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
> -
> -    cd "$ac_dir" || { ac_status=$?; continue; }
> -    # Check for guested configure.
> -    if test -f "$ac_srcdir/configure.gnu"; then
> -      echo &&
> -      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
> -    elif test -f "$ac_srcdir/configure"; then
> -      echo &&
> -      $SHELL "$ac_srcdir/configure" --help=recursive
> -    else
> -      $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
> -    fi || ac_status=$?
> -    cd "$ac_pwd" || { ac_status=$?; break; }
> -  done
> -fi
> -
> -test -n "$ac_init_help" && exit $ac_status
> -if $ac_init_version; then
> -  cat <<\_ACEOF
> -fwts configure 0.1
> -generated by GNU Autoconf 2.68
> -
> -Copyright (C) 2010 Free Software Foundation, Inc.
> -This configure script is free software; the Free Software Foundation
> -gives unlimited permission to copy, distribute and modify it.
> -_ACEOF
> -  exit
> -fi
> -
> -## ------------------------ ##
> -## Autoconf initialization. ##
> -## ------------------------ ##
> -
> -# ac_fn_c_try_compile LINENO
> -# --------------------------
> -# Try to compile conftest.$ac_ext, and return whether this succeeded.
> -ac_fn_c_try_compile ()
> -{
> -  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
> -  rm -f conftest.$ac_objext
> -  if { { ac_try="$ac_compile"
> -case "(($ac_try" in
> -  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
> -  *) ac_try_echo=$ac_try;;
> -esac
> -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
> -$as_echo "$ac_try_echo"; } >&5
> -  (eval "$ac_compile") 2>conftest.err
> -  ac_status=$?
> -  if test -s conftest.err; then
> -    grep -v '^ *+' conftest.err >conftest.er1
> -    cat conftest.er1 >&5
> -    mv -f conftest.er1 conftest.err
> -  fi
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; } && {
> -	 test -z "$ac_c_werror_flag" ||
> -	 test ! -s conftest.err
> -       } && test -s conftest.$ac_objext; then :
> -  ac_retval=0
> -else
> -  $as_echo "$as_me: failed program was:" >&5
> -sed 's/^/| /' conftest.$ac_ext >&5
> -
> -	ac_retval=1
> -fi
> -  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
> -  as_fn_set_status $ac_retval
> -
> -} # ac_fn_c_try_compile
> -
> -# ac_fn_c_try_link LINENO
> -# -----------------------
> -# Try to link conftest.$ac_ext, and return whether this succeeded.
> -ac_fn_c_try_link ()
> -{
> -  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
> -  rm -f conftest.$ac_objext conftest$ac_exeext
> -  if { { ac_try="$ac_link"
> -case "(($ac_try" in
> -  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
> -  *) ac_try_echo=$ac_try;;
> -esac
> -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
> -$as_echo "$ac_try_echo"; } >&5
> -  (eval "$ac_link") 2>conftest.err
> -  ac_status=$?
> -  if test -s conftest.err; then
> -    grep -v '^ *+' conftest.err >conftest.er1
> -    cat conftest.er1 >&5
> -    mv -f conftest.er1 conftest.err
> -  fi
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; } && {
> -	 test -z "$ac_c_werror_flag" ||
> -	 test ! -s conftest.err
> -       } && test -s conftest$ac_exeext && {
> -	 test "$cross_compiling" = yes ||
> -	 $as_test_x conftest$ac_exeext
> -       }; then :
> -  ac_retval=0
> -else
> -  $as_echo "$as_me: failed program was:" >&5
> -sed 's/^/| /' conftest.$ac_ext >&5
> -
> -	ac_retval=1
> -fi
> -  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
> -  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
> -  # interfere with the next link command; also delete a directory that is
> -  # left behind by Apple's compiler.  We do this before executing the actions.
> -  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
> -  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
> -  as_fn_set_status $ac_retval
> -
> -} # ac_fn_c_try_link
> -
> -# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
> -# -------------------------------------------------------
> -# Tests whether HEADER exists and can be compiled using the include files in
> -# INCLUDES, setting the cache variable VAR accordingly.
> -ac_fn_c_check_header_compile ()
> -{
> -  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
> -$as_echo_n "checking for $2... " >&6; }
> -if eval \${$3+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -$4
> -#include <$2>
> -_ACEOF
> -if ac_fn_c_try_compile "$LINENO"; then :
> -  eval "$3=yes"
> -else
> -  eval "$3=no"
> -fi
> -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
> -fi
> -eval ac_res=\$$3
> -	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
> -$as_echo "$ac_res" >&6; }
> -  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
> -
> -} # ac_fn_c_check_header_compile
> -
> -# ac_fn_c_try_cpp LINENO
> -# ----------------------
> -# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
> -ac_fn_c_try_cpp ()
> -{
> -  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
> -  if { { ac_try="$ac_cpp conftest.$ac_ext"
> -case "(($ac_try" in
> -  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
> -  *) ac_try_echo=$ac_try;;
> -esac
> -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
> -$as_echo "$ac_try_echo"; } >&5
> -  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
> -  ac_status=$?
> -  if test -s conftest.err; then
> -    grep -v '^ *+' conftest.err >conftest.er1
> -    cat conftest.er1 >&5
> -    mv -f conftest.er1 conftest.err
> -  fi
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; } > conftest.i && {
> -	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
> -	 test ! -s conftest.err
> -       }; then :
> -  ac_retval=0
> -else
> -  $as_echo "$as_me: failed program was:" >&5
> -sed 's/^/| /' conftest.$ac_ext >&5
> -
> -    ac_retval=1
> -fi
> -  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
> -  as_fn_set_status $ac_retval
> -
> -} # ac_fn_c_try_cpp
> -
> -# ac_fn_c_try_run LINENO
> -# ----------------------
> -# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
> -# that executables *can* be run.
> -ac_fn_c_try_run ()
> -{
> -  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
> -  if { { ac_try="$ac_link"
> -case "(($ac_try" in
> -  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
> -  *) ac_try_echo=$ac_try;;
> -esac
> -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
> -$as_echo "$ac_try_echo"; } >&5
> -  (eval "$ac_link") 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
> -  { { case "(($ac_try" in
> -  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
> -  *) ac_try_echo=$ac_try;;
> -esac
> -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
> -$as_echo "$ac_try_echo"; } >&5
> -  (eval "$ac_try") 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }; }; then :
> -  ac_retval=0
> -else
> -  $as_echo "$as_me: program exited with status $ac_status" >&5
> -       $as_echo "$as_me: failed program was:" >&5
> -sed 's/^/| /' conftest.$ac_ext >&5
> -
> -       ac_retval=$ac_status
> -fi
> -  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
> -  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
> -  as_fn_set_status $ac_retval
> -
> -} # ac_fn_c_try_run
> -
> -# ac_fn_c_check_func LINENO FUNC VAR
> -# ----------------------------------
> -# Tests whether FUNC exists, setting the cache variable VAR accordingly
> -ac_fn_c_check_func ()
> -{
> -  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
> -$as_echo_n "checking for $2... " >&6; }
> -if eval \${$3+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
> -   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
> -#define $2 innocuous_$2
> -
> -/* System header to define __stub macros and hopefully few prototypes,
> -    which can conflict with char $2 (); below.
> -    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
> -    <limits.h> exists even on freestanding compilers.  */
> -
> -#ifdef __STDC__
> -# include <limits.h>
> -#else
> -# include <assert.h>
> -#endif
> -
> -#undef $2
> -
> -/* Override any GCC internal prototype to avoid an error.
> -   Use char because int might match the return type of a GCC
> -   builtin and then its argument prototype would still apply.  */
> -#ifdef __cplusplus
> -extern "C"
> -#endif
> -char $2 ();
> -/* The GNU C library defines this for functions which it implements
> -    to always fail with ENOSYS.  Some functions are actually named
> -    something starting with __ and the normal name is an alias.  */
> -#if defined __stub_$2 || defined __stub___$2
> -choke me
> -#endif
> -
> -int
> -main ()
> -{
> -return $2 ();
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -  eval "$3=yes"
> -else
> -  eval "$3=no"
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -fi
> -eval ac_res=\$$3
> -	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
> -$as_echo "$ac_res" >&6; }
> -  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
> -
> -} # ac_fn_c_check_func
> -
> -# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
> -# -------------------------------------------------------
> -# Tests whether HEADER exists, giving a warning if it cannot be compiled using
> -# the include files in INCLUDES and setting the cache variable VAR
> -# accordingly.
> -ac_fn_c_check_header_mongrel ()
> -{
> -  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
> -  if eval \${$3+:} false; then :
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
> -$as_echo_n "checking for $2... " >&6; }
> -if eval \${$3+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -fi
> -eval ac_res=\$$3
> -	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
> -$as_echo "$ac_res" >&6; }
> -else
> -  # Is the header compilable?
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
> -$as_echo_n "checking $2 usability... " >&6; }
> -cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -$4
> -#include <$2>
> -_ACEOF
> -if ac_fn_c_try_compile "$LINENO"; then :
> -  ac_header_compiler=yes
> -else
> -  ac_header_compiler=no
> -fi
> -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
> -$as_echo "$ac_header_compiler" >&6; }
> -
> -# Is the header present?
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
> -$as_echo_n "checking $2 presence... " >&6; }
> -cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -#include <$2>
> -_ACEOF
> -if ac_fn_c_try_cpp "$LINENO"; then :
> -  ac_header_preproc=yes
> -else
> -  ac_header_preproc=no
> -fi
> -rm -f conftest.err conftest.i conftest.$ac_ext
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
> -$as_echo "$ac_header_preproc" >&6; }
> -
> -# So?  What about this header?
> -case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
> -  yes:no: )
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
> -$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
> -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
> -    ;;
> -  no:yes:* )
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
> -$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
> -$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
> -$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
> -$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
> -$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
> -( $as_echo "## --------------------------------------- ##
> -## Report this to colin.king@canonical.com ##
> -## --------------------------------------- ##"
> -     ) | sed "s/^/$as_me: WARNING:     /" >&2
> -    ;;
> -esac
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
> -$as_echo_n "checking for $2... " >&6; }
> -if eval \${$3+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  eval "$3=\$ac_header_compiler"
> -fi
> -eval ac_res=\$$3
> -	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
> -$as_echo "$ac_res" >&6; }
> -fi
> -  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
> -
> -} # ac_fn_c_check_header_mongrel
> -
> -# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
> -# -------------------------------------------
> -# Tests whether TYPE exists after having included INCLUDES, setting cache
> -# variable VAR accordingly.
> -ac_fn_c_check_type ()
> -{
> -  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
> -$as_echo_n "checking for $2... " >&6; }
> -if eval \${$3+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  eval "$3=no"
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -$4
> -int
> -main ()
> -{
> -if (sizeof ($2))
> -	 return 0;
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_compile "$LINENO"; then :
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -$4
> -int
> -main ()
> -{
> -if (sizeof (($2)))
> -	    return 0;
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_compile "$LINENO"; then :
> -
> -else
> -  eval "$3=yes"
> -fi
> -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
> -fi
> -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
> -fi
> -eval ac_res=\$$3
> -	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
> -$as_echo "$ac_res" >&6; }
> -  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
> -
> -} # ac_fn_c_check_type
> -
> -# ac_fn_c_find_uintX_t LINENO BITS VAR
> -# ------------------------------------
> -# Finds an unsigned integer type with width BITS, setting cache variable VAR
> -# accordingly.
> -ac_fn_c_find_uintX_t ()
> -{
> -  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5
> -$as_echo_n "checking for uint$2_t... " >&6; }
> -if eval \${$3+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  eval "$3=no"
> -     # Order is important - never check a type that is potentially smaller
> -     # than half of the expected target width.
> -     for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \
> -	 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
> -       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -$ac_includes_default
> -int
> -main ()
> -{
> -static int test_array [1 - 2 * !((($ac_type) -1 >> ($2 / 2 - 1)) >> ($2 / 2 - 1) == 3)];
> -test_array [0] = 0
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_compile "$LINENO"; then :
> -  case $ac_type in #(
> -  uint$2_t) :
> -    eval "$3=yes" ;; #(
> -  *) :
> -    eval "$3=\$ac_type" ;;
> -esac
> -fi
> -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
> -       if eval test \"x\$"$3"\" = x"no"; then :
> -
> -else
> -  break
> -fi
> -     done
> -fi
> -eval ac_res=\$$3
> -	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
> -$as_echo "$ac_res" >&6; }
> -  eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
> -
> -} # ac_fn_c_find_uintX_t
> -cat >config.log <<_ACEOF
> -This file contains any messages produced by compilers while
> -running configure, to aid debugging if configure makes a mistake.
> -
> -It was created by fwts $as_me 0.1, which was
> -generated by GNU Autoconf 2.68.  Invocation command line was
> -
> -  $ $0 $@
> -
> -_ACEOF
> -exec 5>>config.log
> -{
> -cat <<_ASUNAME
> -## --------- ##
> -## Platform. ##
> -## --------- ##
> -
> -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
> -uname -m = `(uname -m) 2>/dev/null || echo unknown`
> -uname -r = `(uname -r) 2>/dev/null || echo unknown`
> -uname -s = `(uname -s) 2>/dev/null || echo unknown`
> -uname -v = `(uname -v) 2>/dev/null || echo unknown`
> -
> -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
> -/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
> -
> -/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
> -/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
> -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
> -/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
> -/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
> -/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
> -/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
> -
> -_ASUNAME
> -
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    $as_echo "PATH: $as_dir"
> -  done
> -IFS=$as_save_IFS
> -
> -} >&5
> -
> -cat >&5 <<_ACEOF
> -
> -
> -## ----------- ##
> -## Core tests. ##
> -## ----------- ##
> -
> -_ACEOF
> -
> -
> -# Keep a trace of the command line.
> -# Strip out --no-create and --no-recursion so they do not pile up.
> -# Strip out --silent because we don't want to record it for future runs.
> -# Also quote any args containing shell meta-characters.
> -# Make two passes to allow for proper duplicate-argument suppression.
> -ac_configure_args=
> -ac_configure_args0=
> -ac_configure_args1=
> -ac_must_keep_next=false
> -for ac_pass in 1 2
> -do
> -  for ac_arg
> -  do
> -    case $ac_arg in
> -    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
> -    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
> -    | -silent | --silent | --silen | --sile | --sil)
> -      continue ;;
> -    *\'*)
> -      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
> -    esac
> -    case $ac_pass in
> -    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
> -    2)
> -      as_fn_append ac_configure_args1 " '$ac_arg'"
> -      if test $ac_must_keep_next = true; then
> -	ac_must_keep_next=false # Got value, back to normal.
> -      else
> -	case $ac_arg in
> -	  *=* | --config-cache | -C | -disable-* | --disable-* \
> -	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
> -	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
> -	  | -with-* | --with-* | -without-* | --without-* | --x)
> -	    case "$ac_configure_args0 " in
> -	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
> -	    esac
> -	    ;;
> -	  -* ) ac_must_keep_next=true ;;
> -	esac
> -      fi
> -      as_fn_append ac_configure_args " '$ac_arg'"
> -      ;;
> -    esac
> -  done
> -done
> -{ ac_configure_args0=; unset ac_configure_args0;}
> -{ ac_configure_args1=; unset ac_configure_args1;}
> -
> -# When interrupted or exit'd, cleanup temporary files, and complete
> -# config.log.  We remove comments because anyway the quotes in there
> -# would cause problems or look ugly.
> -# WARNING: Use '\'' to represent an apostrophe within the trap.
> -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
> -trap 'exit_status=$?
> -  # Save into config.log some information that might help in debugging.
> -  {
> -    echo
> -
> -    $as_echo "## ---------------- ##
> -## Cache variables. ##
> -## ---------------- ##"
> -    echo
> -    # The following way of writing the cache mishandles newlines in values,
> -(
> -  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
> -    eval ac_val=\$$ac_var
> -    case $ac_val in #(
> -    *${as_nl}*)
> -      case $ac_var in #(
> -      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
> -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
> -      esac
> -      case $ac_var in #(
> -      _ | IFS | as_nl) ;; #(
> -      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
> -      *) { eval $ac_var=; unset $ac_var;} ;;
> -      esac ;;
> -    esac
> -  done
> -  (set) 2>&1 |
> -    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
> -    *${as_nl}ac_space=\ *)
> -      sed -n \
> -	"s/'\''/'\''\\\\'\'''\''/g;
> -	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
> -      ;; #(
> -    *)
> -      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
> -      ;;
> -    esac |
> -    sort
> -)
> -    echo
> -
> -    $as_echo "## ----------------- ##
> -## Output variables. ##
> -## ----------------- ##"
> -    echo
> -    for ac_var in $ac_subst_vars
> -    do
> -      eval ac_val=\$$ac_var
> -      case $ac_val in
> -      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
> -      esac
> -      $as_echo "$ac_var='\''$ac_val'\''"
> -    done | sort
> -    echo
> -
> -    if test -n "$ac_subst_files"; then
> -      $as_echo "## ------------------- ##
> -## File substitutions. ##
> -## ------------------- ##"
> -      echo
> -      for ac_var in $ac_subst_files
> -      do
> -	eval ac_val=\$$ac_var
> -	case $ac_val in
> -	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
> -	esac
> -	$as_echo "$ac_var='\''$ac_val'\''"
> -      done | sort
> -      echo
> -    fi
> -
> -    if test -s confdefs.h; then
> -      $as_echo "## ----------- ##
> -## confdefs.h. ##
> -## ----------- ##"
> -      echo
> -      cat confdefs.h
> -      echo
> -    fi
> -    test "$ac_signal" != 0 &&
> -      $as_echo "$as_me: caught signal $ac_signal"
> -    $as_echo "$as_me: exit $exit_status"
> -  } >&5
> -  rm -f core *.core core.conftest.* &&
> -    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
> -    exit $exit_status
> -' 0
> -for ac_signal in 1 2 13 15; do
> -  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
> -done
> -ac_signal=0
> -
> -# confdefs.h avoids OS command line length limits that DEFS can exceed.
> -rm -f -r conftest* confdefs.h
> -
> -$as_echo "/* confdefs.h */" > confdefs.h
> -
> -# Predefined preprocessor variables.
> -
> -cat >>confdefs.h <<_ACEOF
> -#define PACKAGE_NAME "$PACKAGE_NAME"
> -_ACEOF
> -
> -cat >>confdefs.h <<_ACEOF
> -#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
> -_ACEOF
> -
> -cat >>confdefs.h <<_ACEOF
> -#define PACKAGE_VERSION "$PACKAGE_VERSION"
> -_ACEOF
> -
> -cat >>confdefs.h <<_ACEOF
> -#define PACKAGE_STRING "$PACKAGE_STRING"
> -_ACEOF
> -
> -cat >>confdefs.h <<_ACEOF
> -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
> -_ACEOF
> -
> -cat >>confdefs.h <<_ACEOF
> -#define PACKAGE_URL "$PACKAGE_URL"
> -_ACEOF
> -
> -
> -# Let the site file select an alternate cache file if it wants to.
> -# Prefer an explicitly selected file to automatically selected ones.
> -ac_site_file1=NONE
> -ac_site_file2=NONE
> -if test -n "$CONFIG_SITE"; then
> -  # We do not want a PATH search for config.site.
> -  case $CONFIG_SITE in #((
> -    -*)  ac_site_file1=./$CONFIG_SITE;;
> -    */*) ac_site_file1=$CONFIG_SITE;;
> -    *)   ac_site_file1=./$CONFIG_SITE;;
> -  esac
> -elif test "x$prefix" != xNONE; then
> -  ac_site_file1=$prefix/share/config.site
> -  ac_site_file2=$prefix/etc/config.site
> -else
> -  ac_site_file1=$ac_default_prefix/share/config.site
> -  ac_site_file2=$ac_default_prefix/etc/config.site
> -fi
> -for ac_site_file in "$ac_site_file1" "$ac_site_file2"
> -do
> -  test "x$ac_site_file" = xNONE && continue
> -  if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
> -$as_echo "$as_me: loading site script $ac_site_file" >&6;}
> -    sed 's/^/| /' "$ac_site_file" >&5
> -    . "$ac_site_file" \
> -      || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
> -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
> -as_fn_error $? "failed to load site script $ac_site_file
> -See \`config.log' for more details" "$LINENO" 5; }
> -  fi
> -done
> -
> -if test -r "$cache_file"; then
> -  # Some versions of bash will fail to source /dev/null (special files
> -  # actually), so we avoid doing that.  DJGPP emulates it as a regular file.
> -  if test /dev/null != "$cache_file" && test -f "$cache_file"; then
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
> -$as_echo "$as_me: loading cache $cache_file" >&6;}
> -    case $cache_file in
> -      [\\/]* | ?:[\\/]* ) . "$cache_file";;
> -      *)                      . "./$cache_file";;
> -    esac
> -  fi
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
> -$as_echo "$as_me: creating cache $cache_file" >&6;}
> -  >$cache_file
> -fi
> -
> -as_fn_append ac_header_list " stdlib.h"
> -as_fn_append ac_header_list " unistd.h"
> -as_fn_append ac_header_list " sys/param.h"
> -# Check that the precious variables saved in the cache have kept the same
> -# value.
> -ac_cache_corrupted=false
> -for ac_var in $ac_precious_vars; do
> -  eval ac_old_set=\$ac_cv_env_${ac_var}_set
> -  eval ac_new_set=\$ac_env_${ac_var}_set
> -  eval ac_old_val=\$ac_cv_env_${ac_var}_value
> -  eval ac_new_val=\$ac_env_${ac_var}_value
> -  case $ac_old_set,$ac_new_set in
> -    set,)
> -      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
> -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
> -      ac_cache_corrupted=: ;;
> -    ,set)
> -      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
> -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
> -      ac_cache_corrupted=: ;;
> -    ,);;
> -    *)
> -      if test "x$ac_old_val" != "x$ac_new_val"; then
> -	# differences in whitespace do not lead to failure.
> -	ac_old_val_w=`echo x $ac_old_val`
> -	ac_new_val_w=`echo x $ac_new_val`
> -	if test "$ac_old_val_w" != "$ac_new_val_w"; then
> -	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
> -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
> -	  ac_cache_corrupted=:
> -	else
> -	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
> -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
> -	  eval $ac_var=\$ac_old_val
> -	fi
> -	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
> -$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
> -	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
> -$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
> -      fi;;
> -  esac
> -  # Pass precious variables to config.status.
> -  if test "$ac_new_set" = set; then
> -    case $ac_new_val in
> -    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
> -    *) ac_arg=$ac_var=$ac_new_val ;;
> -    esac
> -    case " $ac_configure_args " in
> -      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
> -      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
> -    esac
> -  fi
> -done
> -if $ac_cache_corrupted; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
> -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
> -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
> -  as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
> -fi
> -## -------------------- ##
> -## Main body of script. ##
> -## -------------------- ##
> -
> -ac_ext=c
> -ac_cpp='$CPP $CPPFLAGS'
> -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
> -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
> -ac_compiler_gnu=$ac_cv_c_compiler_gnu
> -
> -
> -          am__api_version='1.11'
> -
> -ac_aux_dir=
> -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
> -  if test -f "$ac_dir/install-sh"; then
> -    ac_aux_dir=$ac_dir
> -    ac_install_sh="$ac_aux_dir/install-sh -c"
> -    break
> -  elif test -f "$ac_dir/install.sh"; then
> -    ac_aux_dir=$ac_dir
> -    ac_install_sh="$ac_aux_dir/install.sh -c"
> -    break
> -  elif test -f "$ac_dir/shtool"; then
> -    ac_aux_dir=$ac_dir
> -    ac_install_sh="$ac_aux_dir/shtool install -c"
> -    break
> -  fi
> -done
> -if test -z "$ac_aux_dir"; then
> -  as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
> -fi
> -
> -# These three variables are undocumented and unsupported,
> -# and are intended to be withdrawn in a future Autoconf release.
> -# They can cause serious problems if a builder's source tree is in a directory
> -# whose full name contains unusual characters.
> -ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
> -ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
> -ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
> -
> -
> -# Find a good install program.  We prefer a C program (faster),
> -# so one script is as good as another.  But avoid the broken or
> -# incompatible versions:
> -# SysV /etc/install, /usr/sbin/install
> -# SunOS /usr/etc/install
> -# IRIX /sbin/install
> -# AIX /bin/install
> -# AmigaOS /C/install, which installs bootblocks on floppy discs
> -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
> -# AFS /usr/afsws/bin/install, which mishandles nonexistent args
> -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
> -# OS/2's system install, which has a completely different semantic
> -# ./install, which can be erroneously created by make from ./install.sh.
> -# Reject install programs that cannot install multiple files.
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
> -$as_echo_n "checking for a BSD-compatible install... " >&6; }
> -if test -z "$INSTALL"; then
> -if ${ac_cv_path_install+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    # Account for people who put trailing slashes in PATH elements.
> -case $as_dir/ in #((
> -  ./ | .// | /[cC]/* | \
> -  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
> -  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
> -  /usr/ucb/* ) ;;
> -  *)
> -    # OSF1 and SCO ODT 3.0 have their own names for install.
> -    # Don't use installbsd from OSF since it installs stuff as root
> -    # by default.
> -    for ac_prog in ginstall scoinst install; do
> -      for ac_exec_ext in '' $ac_executable_extensions; do
> -	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
> -	  if test $ac_prog = install &&
> -	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
> -	    # AIX install.  It has an incompatible calling convention.
> -	    :
> -	  elif test $ac_prog = install &&
> -	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
> -	    # program-specific install script used by HP pwplus--don't use.
> -	    :
> -	  else
> -	    rm -rf conftest.one conftest.two conftest.dir
> -	    echo one > conftest.one
> -	    echo two > conftest.two
> -	    mkdir conftest.dir
> -	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
> -	      test -s conftest.one && test -s conftest.two &&
> -	      test -s conftest.dir/conftest.one &&
> -	      test -s conftest.dir/conftest.two
> -	    then
> -	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
> -	      break 3
> -	    fi
> -	  fi
> -	fi
> -      done
> -    done
> -    ;;
> -esac
> -
> -  done
> -IFS=$as_save_IFS
> -
> -rm -rf conftest.one conftest.two conftest.dir
> -
> -fi
> -  if test "${ac_cv_path_install+set}" = set; then
> -    INSTALL=$ac_cv_path_install
> -  else
> -    # As a last resort, use the slow shell script.  Don't cache a
> -    # value for INSTALL within a source directory, because that will
> -    # break other packages using the cache if that directory is
> -    # removed, or if the value is a relative name.
> -    INSTALL=$ac_install_sh
> -  fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
> -$as_echo "$INSTALL" >&6; }
> -
> -# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
> -# It thinks the first close brace ends the variable substitution.
> -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
> -
> -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
> -
> -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
> -$as_echo_n "checking whether build environment is sane... " >&6; }
> -# Just in case
> -sleep 1
> -echo timestamp > conftest.file
> -# Reject unsafe characters in $srcdir or the absolute working directory
> -# name.  Accept space and tab only in the latter.
> -am_lf='
> -'
> -case `pwd` in
> -  *[\\\"\#\$\&\'\`$am_lf]*)
> -    as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
> -esac
> -case $srcdir in
> -  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
> -    as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
> -esac
> -
> -# Do `set' in a subshell so we don't clobber the current shell's
> -# arguments.  Must try -L first in case configure is actually a
> -# symlink; some systems play weird games with the mod time of symlinks
> -# (eg FreeBSD returns the mod time of the symlink's containing
> -# directory).
> -if (
> -   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
> -   if test "$*" = "X"; then
> -      # -L didn't work.
> -      set X `ls -t "$srcdir/configure" conftest.file`
> -   fi
> -   rm -f conftest.file
> -   if test "$*" != "X $srcdir/configure conftest.file" \
> -      && test "$*" != "X conftest.file $srcdir/configure"; then
> -
> -      # If neither matched, then we have a broken ls.  This can happen
> -      # if, for instance, CONFIG_SHELL is bash and it inherits a
> -      # broken ls alias from the environment.  This has actually
> -      # happened.  Such a system could not be considered "sane".
> -      as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
> -alias in your environment" "$LINENO" 5
> -   fi
> -
> -   test "$2" = conftest.file
> -   )
> -then
> -   # Ok.
> -   :
> -else
> -   as_fn_error $? "newly created file is older than distributed files!
> -Check your system clock" "$LINENO" 5
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
> -$as_echo "yes" >&6; }
> -test "$program_prefix" != NONE &&
> -  program_transform_name="s&^&$program_prefix&;$program_transform_name"
> -# Use a double $ so make ignores it.
> -test "$program_suffix" != NONE &&
> -  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
> -# Double any \ or $.
> -# By default was `s,x,x', remove it if useless.
> -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
> -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
> -
> -# expand $ac_aux_dir to an absolute path
> -am_aux_dir=`cd $ac_aux_dir && pwd`
> -
> -if test x"${MISSING+set}" != xset; then
> -  case $am_aux_dir in
> -  *\ * | *\	*)
> -    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
> -  *)
> -    MISSING="\${SHELL} $am_aux_dir/missing" ;;
> -  esac
> -fi
> -# Use eval to expand $SHELL
> -if eval "$MISSING --run true"; then
> -  am_missing_run="$MISSING --run "
> -else
> -  am_missing_run=
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
> -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
> -fi
> -
> -if test x"${install_sh}" != xset; then
> -  case $am_aux_dir in
> -  *\ * | *\	*)
> -    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
> -  *)
> -    install_sh="\${SHELL} $am_aux_dir/install-sh"
> -  esac
> -fi
> -
> -# Installed binaries are usually stripped using `strip' when the user
> -# run `make install-strip'.  However `strip' might not be the right
> -# tool to use in cross-compilation environments, therefore Automake
> -# will honor the `STRIP' environment variable to overrule this program.
> -if test "$cross_compiling" != no; then
> -  if test -n "$ac_tool_prefix"; then
> -  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}strip; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_STRIP+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$STRIP"; then
> -  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -STRIP=$ac_cv_prog_STRIP
> -if test -n "$STRIP"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
> -$as_echo "$STRIP" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$ac_cv_prog_STRIP"; then
> -  ac_ct_STRIP=$STRIP
> -  # Extract the first word of "strip", so it can be a program name with args.
> -set dummy strip; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_STRIP"; then
> -  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_STRIP="strip"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
> -if test -n "$ac_ct_STRIP"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
> -$as_echo "$ac_ct_STRIP" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -  if test "x$ac_ct_STRIP" = x; then
> -    STRIP=":"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    STRIP=$ac_ct_STRIP
> -  fi
> -else
> -  STRIP="$ac_cv_prog_STRIP"
> -fi
> -
> -fi
> -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
> -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
> -if test -z "$MKDIR_P"; then
> -  if ${ac_cv_path_mkdir+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_prog in mkdir gmkdir; do
> -	 for ac_exec_ext in '' $ac_executable_extensions; do
> -	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
> -	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
> -	     'mkdir (GNU coreutils) '* | \
> -	     'mkdir (coreutils) '* | \
> -	     'mkdir (fileutils) '4.1*)
> -	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
> -	       break 3;;
> -	   esac
> -	 done
> -       done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -
> -  test -d ./--version && rmdir ./--version
> -  if test "${ac_cv_path_mkdir+set}" = set; then
> -    MKDIR_P="$ac_cv_path_mkdir -p"
> -  else
> -    # As a last resort, use the slow shell script.  Don't cache a
> -    # value for MKDIR_P within a source directory, because that will
> -    # break other packages using the cache if that directory is
> -    # removed, or if the value is a relative name.
> -    MKDIR_P="$ac_install_sh -d"
> -  fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
> -$as_echo "$MKDIR_P" >&6; }
> -
> -mkdir_p="$MKDIR_P"
> -case $mkdir_p in
> -  [\\/$]* | ?:[\\/]*) ;;
> -  */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
> -esac
> -
> -for ac_prog in gawk mawk nawk awk
> -do
> -  # Extract the first word of "$ac_prog", so it can be a program name with args.
> -set dummy $ac_prog; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_AWK+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$AWK"; then
> -  ac_cv_prog_AWK="$AWK" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_AWK="$ac_prog"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -AWK=$ac_cv_prog_AWK
> -if test -n "$AWK"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
> -$as_echo "$AWK" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -  test -n "$AWK" && break
> -done
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
> -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
> -set x ${MAKE-make}
> -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
> -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  cat >conftest.make <<\_ACEOF
> -SHELL = /bin/sh
> -all:
> -	@echo '@@@%%%=$(MAKE)=@@@%%%'
> -_ACEOF
> -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
> -case `${MAKE-make} -f conftest.make 2>/dev/null` in
> -  *@@@%%%=?*=@@@%%%*)
> -    eval ac_cv_prog_make_${ac_make}_set=yes;;
> -  *)
> -    eval ac_cv_prog_make_${ac_make}_set=no;;
> -esac
> -rm -f conftest.make
> -fi
> -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
> -$as_echo "yes" >&6; }
> -  SET_MAKE=
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -  SET_MAKE="MAKE=${MAKE-make}"
> -fi
> -
> -rm -rf .tst 2>/dev/null
> -mkdir .tst 2>/dev/null
> -if test -d .tst; then
> -  am__leading_dot=.
> -else
> -  am__leading_dot=_
> -fi
> -rmdir .tst 2>/dev/null
> -
> -if test "`cd $srcdir && pwd`" != "`pwd`"; then
> -  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
> -  # is not polluted with repeated "-I."
> -  am__isrc=' -I$(srcdir)'
> -  # test to see if srcdir already configured
> -  if test -f $srcdir/config.status; then
> -    as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
> -  fi
> -fi
> -
> -# test whether we have cygpath
> -if test -z "$CYGPATH_W"; then
> -  if (cygpath --version) >/dev/null 2>/dev/null; then
> -    CYGPATH_W='cygpath -w'
> -  else
> -    CYGPATH_W=echo
> -  fi
> -fi
> -
> -
> -# Define the identity of the package.
> - PACKAGE='fwts'
> - VERSION='0.1'
> -
> -
> -cat >>confdefs.h <<_ACEOF
> -#define PACKAGE "$PACKAGE"
> -_ACEOF
> -
> -
> -cat >>confdefs.h <<_ACEOF
> -#define VERSION "$VERSION"
> -_ACEOF
> -
> -# Some tools Automake needs.
> -
> -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
> -
> -
> -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
> -
> -
> -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
> -
> -
> -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
> -
> -
> -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
> -
> -# We need awk for the "check" target.  The system "awk" is bad on
> -# some platforms.
> -# Always define AMTAR for backward compatibility.
> -
> -AMTAR=${AMTAR-"${am_missing_run}tar"}
> -
> -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
> -
> -
> -
> -
> -
> -	  # Make sure we can run config.sub.
> -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
> -  as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
> -$as_echo_n "checking build system type... " >&6; }
> -if ${ac_cv_build+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  ac_build_alias=$build_alias
> -test "x$ac_build_alias" = x &&
> -  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
> -test "x$ac_build_alias" = x &&
> -  as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
> -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
> -  as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
> -$as_echo "$ac_cv_build" >&6; }
> -case $ac_cv_build in
> -*-*-*) ;;
> -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
> -esac
> -build=$ac_cv_build
> -ac_save_IFS=$IFS; IFS='-'
> -set x $ac_cv_build
> -shift
> -build_cpu=$1
> -build_vendor=$2
> -shift; shift
> -# Remember, the first character of IFS is used to create $*,
> -# except with old shells:
> -build_os=$*
> -IFS=$ac_save_IFS
> -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
> -$as_echo_n "checking host system type... " >&6; }
> -if ${ac_cv_host+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test "x$host_alias" = x; then
> -  ac_cv_host=$ac_cv_build
> -else
> -  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
> -    as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
> -fi
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
> -$as_echo "$ac_cv_host" >&6; }
> -case $ac_cv_host in
> -*-*-*) ;;
> -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
> -esac
> -host=$ac_cv_host
> -ac_save_IFS=$IFS; IFS='-'
> -set x $ac_cv_host
> -shift
> -host_cpu=$1
> -host_vendor=$2
> -shift; shift
> -# Remember, the first character of IFS is used to create $*,
> -# except with old shells:
> -host_os=$*
> -IFS=$ac_save_IFS
> -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
> -
> -
> -
> -          ac_ext=c
> -ac_cpp='$CPP $CPPFLAGS'
> -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
> -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
> -ac_compiler_gnu=$ac_cv_c_compiler_gnu
> -if test -n "$ac_tool_prefix"; then
> -  # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}gcc; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_CC+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$CC"; then
> -  ac_cv_prog_CC="$CC" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_CC="${ac_tool_prefix}gcc"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -CC=$ac_cv_prog_CC
> -if test -n "$CC"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
> -$as_echo "$CC" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$ac_cv_prog_CC"; then
> -  ac_ct_CC=$CC
> -  # Extract the first word of "gcc", so it can be a program name with args.
> -set dummy gcc; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_CC+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_CC"; then
> -  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_CC="gcc"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_CC=$ac_cv_prog_ac_ct_CC
> -if test -n "$ac_ct_CC"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
> -$as_echo "$ac_ct_CC" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -  if test "x$ac_ct_CC" = x; then
> -    CC=""
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    CC=$ac_ct_CC
> -  fi
> -else
> -  CC="$ac_cv_prog_CC"
> -fi
> -
> -if test -z "$CC"; then
> -          if test -n "$ac_tool_prefix"; then
> -    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}cc; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_CC+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$CC"; then
> -  ac_cv_prog_CC="$CC" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_CC="${ac_tool_prefix}cc"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -CC=$ac_cv_prog_CC
> -if test -n "$CC"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
> -$as_echo "$CC" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -  fi
> -fi
> -if test -z "$CC"; then
> -  # Extract the first word of "cc", so it can be a program name with args.
> -set dummy cc; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_CC+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$CC"; then
> -  ac_cv_prog_CC="$CC" # Let the user override the test.
> -else
> -  ac_prog_rejected=no
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
> -       ac_prog_rejected=yes
> -       continue
> -     fi
> -    ac_cv_prog_CC="cc"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -if test $ac_prog_rejected = yes; then
> -  # We found a bogon in the path, so make sure we never use it.
> -  set dummy $ac_cv_prog_CC
> -  shift
> -  if test $# != 0; then
> -    # We chose a different compiler from the bogus one.
> -    # However, it has the same basename, so the bogon will be chosen
> -    # first if we set CC to just the basename; use the full file name.
> -    shift
> -    ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
> -  fi
> -fi
> -fi
> -fi
> -CC=$ac_cv_prog_CC
> -if test -n "$CC"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
> -$as_echo "$CC" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$CC"; then
> -  if test -n "$ac_tool_prefix"; then
> -  for ac_prog in cl.exe
> -  do
> -    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
> -set dummy $ac_tool_prefix$ac_prog; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_CC+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$CC"; then
> -  ac_cv_prog_CC="$CC" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -CC=$ac_cv_prog_CC
> -if test -n "$CC"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
> -$as_echo "$CC" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -    test -n "$CC" && break
> -  done
> -fi
> -if test -z "$CC"; then
> -  ac_ct_CC=$CC
> -  for ac_prog in cl.exe
> -do
> -  # Extract the first word of "$ac_prog", so it can be a program name with args.
> -set dummy $ac_prog; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_CC+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_CC"; then
> -  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_CC="$ac_prog"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_CC=$ac_cv_prog_ac_ct_CC
> -if test -n "$ac_ct_CC"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
> -$as_echo "$ac_ct_CC" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -  test -n "$ac_ct_CC" && break
> -done
> -
> -  if test "x$ac_ct_CC" = x; then
> -    CC=""
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    CC=$ac_ct_CC
> -  fi
> -fi
> -
> -fi
> -
> -
> -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
> -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
> -as_fn_error $? "no acceptable C compiler found in \$PATH
> -See \`config.log' for more details" "$LINENO" 5; }
> -
> -# Provide some information about the compiler.
> -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
> -set X $ac_compile
> -ac_compiler=$2
> -for ac_option in --version -v -V -qversion; do
> -  { { ac_try="$ac_compiler $ac_option >&5"
> -case "(($ac_try" in
> -  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
> -  *) ac_try_echo=$ac_try;;
> -esac
> -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
> -$as_echo "$ac_try_echo"; } >&5
> -  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
> -  ac_status=$?
> -  if test -s conftest.err; then
> -    sed '10a\
> -... rest of stderr output deleted ...
> -         10q' conftest.err >conftest.er1
> -    cat conftest.er1 >&5
> -  fi
> -  rm -f conftest.er1 conftest.err
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }
> -done
> -
> -cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -int
> -main ()
> -{
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -ac_clean_files_save=$ac_clean_files
> -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
> -# Try to create an executable without -o first, disregard a.out.
> -# It will help us diagnose broken compilers, and finding out an intuition
> -# of exeext.
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
> -$as_echo_n "checking whether the C compiler works... " >&6; }
> -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
> -
> -# The possible output files:
> -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
> -
> -ac_rmfiles=
> -for ac_file in $ac_files
> -do
> -  case $ac_file in
> -    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
> -    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
> -  esac
> -done
> -rm -f $ac_rmfiles
> -
> -if { { ac_try="$ac_link_default"
> -case "(($ac_try" in
> -  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
> -  *) ac_try_echo=$ac_try;;
> -esac
> -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
> -$as_echo "$ac_try_echo"; } >&5
> -  (eval "$ac_link_default") 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }; then :
> -  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
> -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
> -# in a Makefile.  We should not override ac_cv_exeext if it was cached,
> -# so that the user can short-circuit this test for compilers unknown to
> -# Autoconf.
> -for ac_file in $ac_files ''
> -do
> -  test -f "$ac_file" || continue
> -  case $ac_file in
> -    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
> -	;;
> -    [ab].out )
> -	# We found the default executable, but exeext='' is most
> -	# certainly right.
> -	break;;
> -    *.* )
> -	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
> -	then :; else
> -	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
> -	fi
> -	# We set ac_cv_exeext here because the later test for it is not
> -	# safe: cross compilers may not add the suffix if given an `-o'
> -	# argument, so we may need to know it at that point already.
> -	# Even if this section looks crufty: it has the advantage of
> -	# actually working.
> -	break;;
> -    * )
> -	break;;
> -  esac
> -done
> -test "$ac_cv_exeext" = no && ac_cv_exeext=
> -
> -else
> -  ac_file=''
> -fi
> -if test -z "$ac_file"; then :
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -$as_echo "$as_me: failed program was:" >&5
> -sed 's/^/| /' conftest.$ac_ext >&5
> -
> -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
> -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
> -as_fn_error 77 "C compiler cannot create executables
> -See \`config.log' for more details" "$LINENO" 5; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
> -$as_echo "yes" >&6; }
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
> -$as_echo_n "checking for C compiler default output file name... " >&6; }
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
> -$as_echo "$ac_file" >&6; }
> -ac_exeext=$ac_cv_exeext
> -
> -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
> -ac_clean_files=$ac_clean_files_save
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
> -$as_echo_n "checking for suffix of executables... " >&6; }
> -if { { ac_try="$ac_link"
> -case "(($ac_try" in
> -  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
> -  *) ac_try_echo=$ac_try;;
> -esac
> -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
> -$as_echo "$ac_try_echo"; } >&5
> -  (eval "$ac_link") 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }; then :
> -  # If both `conftest.exe' and `conftest' are `present' (well, observable)
> -# catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
> -# work properly (i.e., refer to `conftest.exe'), while it won't with
> -# `rm'.
> -for ac_file in conftest.exe conftest conftest.*; do
> -  test -f "$ac_file" || continue
> -  case $ac_file in
> -    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
> -    *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
> -	  break;;
> -    * ) break;;
> -  esac
> -done
> -else
> -  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
> -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
> -as_fn_error $? "cannot compute suffix of executables: cannot compile and link
> -See \`config.log' for more details" "$LINENO" 5; }
> -fi
> -rm -f conftest conftest$ac_cv_exeext
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
> -$as_echo "$ac_cv_exeext" >&6; }
> -
> -rm -f conftest.$ac_ext
> -EXEEXT=$ac_cv_exeext
> -ac_exeext=$EXEEXT
> -cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -#include <stdio.h>
> -int
> -main ()
> -{
> -FILE *f = fopen ("conftest.out", "w");
> - return ferror (f) || fclose (f) != 0;
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -ac_clean_files="$ac_clean_files conftest.out"
> -# Check that the compiler produces executables we can run.  If not, either
> -# the compiler is broken, or we cross compile.
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
> -$as_echo_n "checking whether we are cross compiling... " >&6; }
> -if test "$cross_compiling" != yes; then
> -  { { ac_try="$ac_link"
> -case "(($ac_try" in
> -  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
> -  *) ac_try_echo=$ac_try;;
> -esac
> -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
> -$as_echo "$ac_try_echo"; } >&5
> -  (eval "$ac_link") 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }
> -  if { ac_try='./conftest$ac_cv_exeext'
> -  { { case "(($ac_try" in
> -  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
> -  *) ac_try_echo=$ac_try;;
> -esac
> -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
> -$as_echo "$ac_try_echo"; } >&5
> -  (eval "$ac_try") 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }; }; then
> -    cross_compiling=no
> -  else
> -    if test "$cross_compiling" = maybe; then
> -	cross_compiling=yes
> -    else
> -	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
> -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
> -as_fn_error $? "cannot run C compiled programs.
> -If you meant to cross compile, use \`--host'.
> -See \`config.log' for more details" "$LINENO" 5; }
> -    fi
> -  fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
> -$as_echo "$cross_compiling" >&6; }
> -
> -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
> -ac_clean_files=$ac_clean_files_save
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
> -$as_echo_n "checking for suffix of object files... " >&6; }
> -if ${ac_cv_objext+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -int
> -main ()
> -{
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -rm -f conftest.o conftest.obj
> -if { { ac_try="$ac_compile"
> -case "(($ac_try" in
> -  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
> -  *) ac_try_echo=$ac_try;;
> -esac
> -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
> -$as_echo "$ac_try_echo"; } >&5
> -  (eval "$ac_compile") 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }; then :
> -  for ac_file in conftest.o conftest.obj conftest.*; do
> -  test -f "$ac_file" || continue;
> -  case $ac_file in
> -    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
> -    *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
> -       break;;
> -  esac
> -done
> -else
> -  $as_echo "$as_me: failed program was:" >&5
> -sed 's/^/| /' conftest.$ac_ext >&5
> -
> -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
> -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
> -as_fn_error $? "cannot compute suffix of object files: cannot compile
> -See \`config.log' for more details" "$LINENO" 5; }
> -fi
> -rm -f conftest.$ac_cv_objext conftest.$ac_ext
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
> -$as_echo "$ac_cv_objext" >&6; }
> -OBJEXT=$ac_cv_objext
> -ac_objext=$OBJEXT
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
> -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
> -if ${ac_cv_c_compiler_gnu+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -int
> -main ()
> -{
> -#ifndef __GNUC__
> -       choke me
> -#endif
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_compile "$LINENO"; then :
> -  ac_compiler_gnu=yes
> -else
> -  ac_compiler_gnu=no
> -fi
> -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
> -ac_cv_c_compiler_gnu=$ac_compiler_gnu
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
> -$as_echo "$ac_cv_c_compiler_gnu" >&6; }
> -if test $ac_compiler_gnu = yes; then
> -  GCC=yes
> -else
> -  GCC=
> -fi
> -ac_test_CFLAGS=${CFLAGS+set}
> -ac_save_CFLAGS=$CFLAGS
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
> -$as_echo_n "checking whether $CC accepts -g... " >&6; }
> -if ${ac_cv_prog_cc_g+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  ac_save_c_werror_flag=$ac_c_werror_flag
> -   ac_c_werror_flag=yes
> -   ac_cv_prog_cc_g=no
> -   CFLAGS="-g"
> -   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -int
> -main ()
> -{
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_compile "$LINENO"; then :
> -  ac_cv_prog_cc_g=yes
> -else
> -  CFLAGS=""
> -      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -int
> -main ()
> -{
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_compile "$LINENO"; then :
> -
> -else
> -  ac_c_werror_flag=$ac_save_c_werror_flag
> -	 CFLAGS="-g"
> -	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -int
> -main ()
> -{
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_compile "$LINENO"; then :
> -  ac_cv_prog_cc_g=yes
> -fi
> -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
> -fi
> -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
> -fi
> -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
> -   ac_c_werror_flag=$ac_save_c_werror_flag
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
> -$as_echo "$ac_cv_prog_cc_g" >&6; }
> -if test "$ac_test_CFLAGS" = set; then
> -  CFLAGS=$ac_save_CFLAGS
> -elif test $ac_cv_prog_cc_g = yes; then
> -  if test "$GCC" = yes; then
> -    CFLAGS="-g -O2"
> -  else
> -    CFLAGS="-g"
> -  fi
> -else
> -  if test "$GCC" = yes; then
> -    CFLAGS="-O2"
> -  else
> -    CFLAGS=
> -  fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
> -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
> -if ${ac_cv_prog_cc_c89+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  ac_cv_prog_cc_c89=no
> -ac_save_CC=$CC
> -cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -#include <stdarg.h>
> -#include <stdio.h>
> -#include <sys/types.h>
> -#include <sys/stat.h>
> -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh.  */
> -struct buf { int x; };
> -FILE * (*rcsopen) (struct buf *, struct stat *, int);
> -static char *e (p, i)
> -     char **p;
> -     int i;
> -{
> -  return p[i];
> -}
> -static char *f (char * (*g) (char **, int), char **p, ...)
> -{
> -  char *s;
> -  va_list v;
> -  va_start (v,p);
> -  s = g (p, va_arg (v,int));
> -  va_end (v);
> -  return s;
> -}
> -
> -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
> -   function prototypes and stuff, but not '\xHH' hex character constants.
> -   These don't provoke an error unfortunately, instead are silently treated
> -   as 'x'.  The following induces an error, until -std is added to get
> -   proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
> -   array size at least.  It's necessary to write '\x00'==0 to get something
> -   that's true only with -std.  */
> -int osf4_cc_array ['\x00' == 0 ? 1 : -1];
> -
> -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
> -   inside strings and character constants.  */
> -#define FOO(x) 'x'
> -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
> -
> -int test (int i, double x);
> -struct s1 {int (*f) (int a);};
> -struct s2 {int (*f) (double a);};
> -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
> -int argc;
> -char **argv;
> -int
> -main ()
> -{
> -return f (e, argv, 0) != argv[0]  ||  f (e, argv, 1) != argv[1];
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
> -	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
> -do
> -  CC="$ac_save_CC $ac_arg"
> -  if ac_fn_c_try_compile "$LINENO"; then :
> -  ac_cv_prog_cc_c89=$ac_arg
> -fi
> -rm -f core conftest.err conftest.$ac_objext
> -  test "x$ac_cv_prog_cc_c89" != "xno" && break
> -done
> -rm -f conftest.$ac_ext
> -CC=$ac_save_CC
> -
> -fi
> -# AC_CACHE_VAL
> -case "x$ac_cv_prog_cc_c89" in
> -  x)
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
> -$as_echo "none needed" >&6; } ;;
> -  xno)
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
> -$as_echo "unsupported" >&6; } ;;
> -  *)
> -    CC="$CC $ac_cv_prog_cc_c89"
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
> -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
> -esac
> -if test "x$ac_cv_prog_cc_c89" != xno; then :
> -
> -fi
> -
> -ac_ext=c
> -ac_cpp='$CPP $CPPFLAGS'
> -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
> -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
> -ac_compiler_gnu=$ac_cv_c_compiler_gnu
> -DEPDIR="${am__leading_dot}deps"
> -
> -ac_config_commands="$ac_config_commands depfiles"
> -
> -
> -am_make=${MAKE-make}
> -cat > confinc << 'END'
> -am__doit:
> -	@echo this is the am__doit target
> -.PHONY: am__doit
> -END
> -# If we don't find an include directive, just comment out the code.
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
> -$as_echo_n "checking for style of include used by $am_make... " >&6; }
> -am__include="#"
> -am__quote=
> -_am_result=none
> -# First try GNU make style include.
> -echo "include confinc" > confmf
> -# Ignore all kinds of additional output from `make'.
> -case `$am_make -s -f confmf 2> /dev/null` in #(
> -*the\ am__doit\ target*)
> -  am__include=include
> -  am__quote=
> -  _am_result=GNU
> -  ;;
> -esac
> -# Now try BSD make style include.
> -if test "$am__include" = "#"; then
> -   echo '.include "confinc"' > confmf
> -   case `$am_make -s -f confmf 2> /dev/null` in #(
> -   *the\ am__doit\ target*)
> -     am__include=.include
> -     am__quote="\""
> -     _am_result=BSD
> -     ;;
> -   esac
> -fi
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
> -$as_echo "$_am_result" >&6; }
> -rm -f confinc confmf
> -
> -# Check whether --enable-dependency-tracking was given.
> -if test "${enable_dependency_tracking+set}" = set; then :
> -  enableval=$enable_dependency_tracking;
> -fi
> -
> -if test "x$enable_dependency_tracking" != xno; then
> -  am_depcomp="$ac_aux_dir/depcomp"
> -  AMDEPBACKSLASH='\'
> -fi
> - if test "x$enable_dependency_tracking" != xno; then
> -  AMDEP_TRUE=
> -  AMDEP_FALSE='#'
> -else
> -  AMDEP_TRUE='#'
> -  AMDEP_FALSE=
> -fi
> -
> -
> -
> -depcc="$CC"   am_compiler_list=
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
> -$as_echo_n "checking dependency style of $depcc... " >&6; }
> -if ${am_cv_CC_dependencies_compiler_type+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
> -  # We make a subdir and do the tests there.  Otherwise we can end up
> -  # making bogus files that we don't know about and never remove.  For
> -  # instance it was reported that on HP-UX the gcc test will end up
> -  # making a dummy file named `D' -- because `-MD' means `put the output
> -  # in D'.
> -  mkdir conftest.dir
> -  # Copy depcomp to subdir because otherwise we won't find it if we're
> -  # using a relative directory.
> -  cp "$am_depcomp" conftest.dir
> -  cd conftest.dir
> -  # We will build objects and dependencies in a subdirectory because
> -  # it helps to detect inapplicable dependency modes.  For instance
> -  # both Tru64's cc and ICC support -MD to output dependencies as a
> -  # side effect of compilation, but ICC will put the dependencies in
> -  # the current directory while Tru64 will put them in the object
> -  # directory.
> -  mkdir sub
> -
> -  am_cv_CC_dependencies_compiler_type=none
> -  if test "$am_compiler_list" = ""; then
> -     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
> -  fi
> -  am__universal=false
> -  case " $depcc " in #(
> -     *\ -arch\ *\ -arch\ *) am__universal=true ;;
> -     esac
> -
> -  for depmode in $am_compiler_list; do
> -    # Setup a source with many dependencies, because some compilers
> -    # like to wrap large dependency lists on column 80 (with \), and
> -    # we should not choose a depcomp mode which is confused by this.
> -    #
> -    # We need to recreate these files for each test, as the compiler may
> -    # overwrite some of them when testing with obscure command lines.
> -    # This happens at least with the AIX C compiler.
> -    : > sub/conftest.c
> -    for i in 1 2 3 4 5 6; do
> -      echo '#include "conftst'$i'.h"' >> sub/conftest.c
> -      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
> -      # Solaris 8's {/usr,}/bin/sh.
> -      touch sub/conftst$i.h
> -    done
> -    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
> -
> -    # We check with `-c' and `-o' for the sake of the "dashmstdout"
> -    # mode.  It turns out that the SunPro C++ compiler does not properly
> -    # handle `-M -o', and we need to detect this.  Also, some Intel
> -    # versions had trouble with output in subdirs
> -    am__obj=sub/conftest.${OBJEXT-o}
> -    am__minus_obj="-o $am__obj"
> -    case $depmode in
> -    gcc)
> -      # This depmode causes a compiler race in universal mode.
> -      test "$am__universal" = false || continue
> -      ;;
> -    nosideeffect)
> -      # after this tag, mechanisms are not by side-effect, so they'll
> -      # only be used when explicitly requested
> -      if test "x$enable_dependency_tracking" = xyes; then
> -	continue
> -      else
> -	break
> -      fi
> -      ;;
> -    msvisualcpp | msvcmsys)
> -      # This compiler won't grok `-c -o', but also, the minuso test has
> -      # not run yet.  These depmodes are late enough in the game, and
> -      # so weak that their functioning should not be impacted.
> -      am__obj=conftest.${OBJEXT-o}
> -      am__minus_obj=
> -      ;;
> -    none) break ;;
> -    esac
> -    if depmode=$depmode \
> -       source=sub/conftest.c object=$am__obj \
> -       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
> -       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
> -         >/dev/null 2>conftest.err &&
> -       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
> -       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
> -       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
> -       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
> -      # icc doesn't choke on unknown options, it will just issue warnings
> -      # or remarks (even with -Werror).  So we grep stderr for any message
> -      # that says an option was ignored or not supported.
> -      # When given -MP, icc 7.0 and 7.1 complain thusly:
> -      #   icc: Command line warning: ignoring option '-M'; no argument required
> -      # The diagnosis changed in icc 8.0:
> -      #   icc: Command line remark: option '-MP' not supported
> -      if (grep 'ignoring option' conftest.err ||
> -          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
> -        am_cv_CC_dependencies_compiler_type=$depmode
> -        break
> -      fi
> -    fi
> -  done
> -
> -  cd ..
> -  rm -rf conftest.dir
> -else
> -  am_cv_CC_dependencies_compiler_type=none
> -fi
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
> -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
> -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
> -
> - if
> -  test "x$enable_dependency_tracking" != xno \
> -  && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
> -  am__fastdepCC_TRUE=
> -  am__fastdepCC_FALSE='#'
> -else
> -  am__fastdepCC_TRUE='#'
> -  am__fastdepCC_FALSE=
> -fi
> -
> -
> -
> -for ac_prog in flex lex
> -do
> -  # Extract the first word of "$ac_prog", so it can be a program name with args.
> -set dummy $ac_prog; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_LEX+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$LEX"; then
> -  ac_cv_prog_LEX="$LEX" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_LEX="$ac_prog"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -LEX=$ac_cv_prog_LEX
> -if test -n "$LEX"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LEX" >&5
> -$as_echo "$LEX" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -  test -n "$LEX" && break
> -done
> -test -n "$LEX" || LEX=":"
> -
> -if test "x$LEX" != "x:"; then
> -  cat >conftest.l <<_ACEOF
> -%%
> -a { ECHO; }
> -b { REJECT; }
> -c { yymore (); }
> -d { yyless (1); }
> -e { yyless (input () != 0); }
> -f { unput (yytext[0]); }
> -. { BEGIN INITIAL; }
> -%%
> -#ifdef YYTEXT_POINTER
> -extern char *yytext;
> -#endif
> -int
> -main (void)
> -{
> -  return ! yylex () + ! yywrap ();
> -}
> -_ACEOF
> -{ { ac_try="$LEX conftest.l"
> -case "(($ac_try" in
> -  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
> -  *) ac_try_echo=$ac_try;;
> -esac
> -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
> -$as_echo "$ac_try_echo"; } >&5
> -  (eval "$LEX conftest.l") 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking lex output file root" >&5
> -$as_echo_n "checking lex output file root... " >&6; }
> -if ${ac_cv_prog_lex_root+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -
> -if test -f lex.yy.c; then
> -  ac_cv_prog_lex_root=lex.yy
> -elif test -f lexyy.c; then
> -  ac_cv_prog_lex_root=lexyy
> -else
> -  as_fn_error $? "cannot find output from $LEX; giving up" "$LINENO" 5
> -fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_root" >&5
> -$as_echo "$ac_cv_prog_lex_root" >&6; }
> -LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
> -
> -if test -z "${LEXLIB+set}"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking lex library" >&5
> -$as_echo_n "checking lex library... " >&6; }
> -if ${ac_cv_lib_lex+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -
> -    ac_save_LIBS=$LIBS
> -    ac_cv_lib_lex='none needed'
> -    for ac_lib in '' -lfl -ll; do
> -      LIBS="$ac_lib $ac_save_LIBS"
> -      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -`cat $LEX_OUTPUT_ROOT.c`
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -  ac_cv_lib_lex=$ac_lib
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -      test "$ac_cv_lib_lex" != 'none needed' && break
> -    done
> -    LIBS=$ac_save_LIBS
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_lex" >&5
> -$as_echo "$ac_cv_lib_lex" >&6; }
> -  test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex
> -fi
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether yytext is a pointer" >&5
> -$as_echo_n "checking whether yytext is a pointer... " >&6; }
> -if ${ac_cv_prog_lex_yytext_pointer+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  # POSIX says lex can declare yytext either as a pointer or an array; the
> -# default is implementation-dependent.  Figure out which it is, since
> -# not all implementations provide the %pointer and %array declarations.
> -ac_cv_prog_lex_yytext_pointer=no
> -ac_save_LIBS=$LIBS
> -LIBS="$LEXLIB $ac_save_LIBS"
> -cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -  #define YYTEXT_POINTER 1
> -`cat $LEX_OUTPUT_ROOT.c`
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -  ac_cv_prog_lex_yytext_pointer=yes
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -LIBS=$ac_save_LIBS
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_lex_yytext_pointer" >&5
> -$as_echo "$ac_cv_prog_lex_yytext_pointer" >&6; }
> -if test $ac_cv_prog_lex_yytext_pointer = yes; then
> -
> -$as_echo "#define YYTEXT_POINTER 1" >>confdefs.h
> -
> -fi
> -rm -f conftest.l $LEX_OUTPUT_ROOT.c
> -
> -fi
> -	  for ac_prog in 'bison -y' byacc
> -do
> -  # Extract the first word of "$ac_prog", so it can be a program name with args.
> -set dummy $ac_prog; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_YACC+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$YACC"; then
> -  ac_cv_prog_YACC="$YACC" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_YACC="$ac_prog"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -YACC=$ac_cv_prog_YACC
> -if test -n "$YACC"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $YACC" >&5
> -$as_echo "$YACC" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -  test -n "$YACC" && break
> -done
> -test -n "$YACC" || YACC="yacc"
> -
> -	  case `pwd` in
> -  *\ * | *\	*)
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
> -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
> -esac
> -
> -
> -
> -macro_version='2.4'
> -macro_revision='1.3293'
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -ltmain="$ac_aux_dir/ltmain.sh"
> -
> -# Backslashify metacharacters that are still active within
> -# double-quoted strings.
> -sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
> -
> -# Same as above, but do not quote variable references.
> -double_quote_subst='s/\(["`\\]\)/\\\1/g'
> -
> -# Sed substitution to delay expansion of an escaped shell variable in a
> -# double_quote_subst'ed string.
> -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
> -
> -# Sed substitution to delay expansion of an escaped single quote.
> -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
> -
> -# Sed substitution to avoid accidental globbing in evaled expressions
> -no_glob_subst='s/\*/\\\*/g'
> -
> -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
> -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
> -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
> -$as_echo_n "checking how to print strings... " >&6; }
> -# Test print first, because it will be a builtin if present.
> -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
> -   test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
> -  ECHO='print -r --'
> -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
> -  ECHO='printf %s\n'
> -else
> -  # Use this function as a fallback that always works.
> -  func_fallback_echo ()
> -  {
> -    eval 'cat <<_LTECHO_EOF
> -$1
> -_LTECHO_EOF'
> -  }
> -  ECHO='func_fallback_echo'
> -fi
> -
> -# func_echo_all arg...
> -# Invoke $ECHO with all args, space-separated.
> -func_echo_all ()
> -{
> -    $ECHO ""
> -}
> -
> -case "$ECHO" in
> -  printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
> -$as_echo "printf" >&6; } ;;
> -  print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
> -$as_echo "print -r" >&6; } ;;
> -  *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
> -$as_echo "cat" >&6; } ;;
> -esac
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
> -$as_echo_n "checking for a sed that does not truncate output... " >&6; }
> -if ${ac_cv_path_SED+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
> -     for ac_i in 1 2 3 4 5 6 7; do
> -       ac_script="$ac_script$as_nl$ac_script"
> -     done
> -     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
> -     { ac_script=; unset ac_script;}
> -     if test -z "$SED"; then
> -  ac_path_SED_found=false
> -  # Loop through the user's path and test for each of PROGNAME-LIST
> -  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_prog in sed gsed; do
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
> -      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
> -# Check for GNU ac_path_SED and select it if it is found.
> -  # Check for GNU $ac_path_SED
> -case `"$ac_path_SED" --version 2>&1` in
> -*GNU*)
> -  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
> -*)
> -  ac_count=0
> -  $as_echo_n 0123456789 >"conftest.in"
> -  while :
> -  do
> -    cat "conftest.in" "conftest.in" >"conftest.tmp"
> -    mv "conftest.tmp" "conftest.in"
> -    cp "conftest.in" "conftest.nl"
> -    $as_echo '' >> "conftest.nl"
> -    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
> -    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
> -    as_fn_arith $ac_count + 1 && ac_count=$as_val
> -    if test $ac_count -gt ${ac_path_SED_max-0}; then
> -      # Best one so far, save it but keep looking for a better one
> -      ac_cv_path_SED="$ac_path_SED"
> -      ac_path_SED_max=$ac_count
> -    fi
> -    # 10*(2^10) chars as input seems more than enough
> -    test $ac_count -gt 10 && break
> -  done
> -  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
> -esac
> -
> -      $ac_path_SED_found && break 3
> -    done
> -  done
> -  done
> -IFS=$as_save_IFS
> -  if test -z "$ac_cv_path_SED"; then
> -    as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
> -  fi
> -else
> -  ac_cv_path_SED=$SED
> -fi
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
> -$as_echo "$ac_cv_path_SED" >&6; }
> - SED="$ac_cv_path_SED"
> -  rm -f conftest.sed
> -
> -test -z "$SED" && SED=sed
> -Xsed="$SED -e 1s/^X//"
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
> -$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
> -if ${ac_cv_path_GREP+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -z "$GREP"; then
> -  ac_path_GREP_found=false
> -  # Loop through the user's path and test for each of PROGNAME-LIST
> -  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_prog in grep ggrep; do
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
> -      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
> -# Check for GNU ac_path_GREP and select it if it is found.
> -  # Check for GNU $ac_path_GREP
> -case `"$ac_path_GREP" --version 2>&1` in
> -*GNU*)
> -  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
> -*)
> -  ac_count=0
> -  $as_echo_n 0123456789 >"conftest.in"
> -  while :
> -  do
> -    cat "conftest.in" "conftest.in" >"conftest.tmp"
> -    mv "conftest.tmp" "conftest.in"
> -    cp "conftest.in" "conftest.nl"
> -    $as_echo 'GREP' >> "conftest.nl"
> -    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
> -    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
> -    as_fn_arith $ac_count + 1 && ac_count=$as_val
> -    if test $ac_count -gt ${ac_path_GREP_max-0}; then
> -      # Best one so far, save it but keep looking for a better one
> -      ac_cv_path_GREP="$ac_path_GREP"
> -      ac_path_GREP_max=$ac_count
> -    fi
> -    # 10*(2^10) chars as input seems more than enough
> -    test $ac_count -gt 10 && break
> -  done
> -  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
> -esac
> -
> -      $ac_path_GREP_found && break 3
> -    done
> -  done
> -  done
> -IFS=$as_save_IFS
> -  if test -z "$ac_cv_path_GREP"; then
> -    as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
> -  fi
> -else
> -  ac_cv_path_GREP=$GREP
> -fi
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
> -$as_echo "$ac_cv_path_GREP" >&6; }
> - GREP="$ac_cv_path_GREP"
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
> -$as_echo_n "checking for egrep... " >&6; }
> -if ${ac_cv_path_EGREP+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
> -   then ac_cv_path_EGREP="$GREP -E"
> -   else
> -     if test -z "$EGREP"; then
> -  ac_path_EGREP_found=false
> -  # Loop through the user's path and test for each of PROGNAME-LIST
> -  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_prog in egrep; do
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
> -      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
> -# Check for GNU ac_path_EGREP and select it if it is found.
> -  # Check for GNU $ac_path_EGREP
> -case `"$ac_path_EGREP" --version 2>&1` in
> -*GNU*)
> -  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
> -*)
> -  ac_count=0
> -  $as_echo_n 0123456789 >"conftest.in"
> -  while :
> -  do
> -    cat "conftest.in" "conftest.in" >"conftest.tmp"
> -    mv "conftest.tmp" "conftest.in"
> -    cp "conftest.in" "conftest.nl"
> -    $as_echo 'EGREP' >> "conftest.nl"
> -    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
> -    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
> -    as_fn_arith $ac_count + 1 && ac_count=$as_val
> -    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
> -      # Best one so far, save it but keep looking for a better one
> -      ac_cv_path_EGREP="$ac_path_EGREP"
> -      ac_path_EGREP_max=$ac_count
> -    fi
> -    # 10*(2^10) chars as input seems more than enough
> -    test $ac_count -gt 10 && break
> -  done
> -  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
> -esac
> -
> -      $ac_path_EGREP_found && break 3
> -    done
> -  done
> -  done
> -IFS=$as_save_IFS
> -  if test -z "$ac_cv_path_EGREP"; then
> -    as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
> -  fi
> -else
> -  ac_cv_path_EGREP=$EGREP
> -fi
> -
> -   fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
> -$as_echo "$ac_cv_path_EGREP" >&6; }
> - EGREP="$ac_cv_path_EGREP"
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
> -$as_echo_n "checking for fgrep... " >&6; }
> -if ${ac_cv_path_FGREP+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
> -   then ac_cv_path_FGREP="$GREP -F"
> -   else
> -     if test -z "$FGREP"; then
> -  ac_path_FGREP_found=false
> -  # Loop through the user's path and test for each of PROGNAME-LIST
> -  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_prog in fgrep; do
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
> -      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
> -# Check for GNU ac_path_FGREP and select it if it is found.
> -  # Check for GNU $ac_path_FGREP
> -case `"$ac_path_FGREP" --version 2>&1` in
> -*GNU*)
> -  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
> -*)
> -  ac_count=0
> -  $as_echo_n 0123456789 >"conftest.in"
> -  while :
> -  do
> -    cat "conftest.in" "conftest.in" >"conftest.tmp"
> -    mv "conftest.tmp" "conftest.in"
> -    cp "conftest.in" "conftest.nl"
> -    $as_echo 'FGREP' >> "conftest.nl"
> -    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
> -    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
> -    as_fn_arith $ac_count + 1 && ac_count=$as_val
> -    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
> -      # Best one so far, save it but keep looking for a better one
> -      ac_cv_path_FGREP="$ac_path_FGREP"
> -      ac_path_FGREP_max=$ac_count
> -    fi
> -    # 10*(2^10) chars as input seems more than enough
> -    test $ac_count -gt 10 && break
> -  done
> -  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
> -esac
> -
> -      $ac_path_FGREP_found && break 3
> -    done
> -  done
> -  done
> -IFS=$as_save_IFS
> -  if test -z "$ac_cv_path_FGREP"; then
> -    as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
> -  fi
> -else
> -  ac_cv_path_FGREP=$FGREP
> -fi
> -
> -   fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
> -$as_echo "$ac_cv_path_FGREP" >&6; }
> - FGREP="$ac_cv_path_FGREP"
> -
> -
> -test -z "$GREP" && GREP=grep
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -# Check whether --with-gnu-ld was given.
> -if test "${with_gnu_ld+set}" = set; then :
> -  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
> -else
> -  with_gnu_ld=no
> -fi
> -
> -ac_prog=ld
> -if test "$GCC" = yes; then
> -  # Check if gcc -print-prog-name=ld gives a path.
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
> -$as_echo_n "checking for ld used by $CC... " >&6; }
> -  case $host in
> -  *-*-mingw*)
> -    # gcc leaves a trailing carriage return which upsets mingw
> -    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
> -  *)
> -    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
> -  esac
> -  case $ac_prog in
> -    # Accept absolute paths.
> -    [\\/]* | ?:[\\/]*)
> -      re_direlt='/[^/][^/]*/\.\./'
> -      # Canonicalize the pathname of ld
> -      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
> -      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
> -	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
> -      done
> -      test -z "$LD" && LD="$ac_prog"
> -      ;;
> -  "")
> -    # If it fails, then pretend we aren't using GCC.
> -    ac_prog=ld
> -    ;;
> -  *)
> -    # If it is relative, then search for the first ld in PATH.
> -    with_gnu_ld=unknown
> -    ;;
> -  esac
> -elif test "$with_gnu_ld" = yes; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
> -$as_echo_n "checking for GNU ld... " >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
> -$as_echo_n "checking for non-GNU ld... " >&6; }
> -fi
> -if ${lt_cv_path_LD+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -z "$LD"; then
> -  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
> -  for ac_dir in $PATH; do
> -    IFS="$lt_save_ifs"
> -    test -z "$ac_dir" && ac_dir=.
> -    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
> -      lt_cv_path_LD="$ac_dir/$ac_prog"
> -      # Check to see if the program is GNU ld.  I'd rather use --version,
> -      # but apparently some variants of GNU ld only accept -v.
> -      # Break only if it was the GNU/non-GNU ld that we prefer.
> -      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
> -      *GNU* | *'with BFD'*)
> -	test "$with_gnu_ld" != no && break
> -	;;
> -      *)
> -	test "$with_gnu_ld" != yes && break
> -	;;
> -      esac
> -    fi
> -  done
> -  IFS="$lt_save_ifs"
> -else
> -  lt_cv_path_LD="$LD" # Let the user override the test with a path.
> -fi
> -fi
> -
> -LD="$lt_cv_path_LD"
> -if test -n "$LD"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
> -$as_echo "$LD" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
> -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
> -if ${lt_cv_prog_gnu_ld+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  # I'd rather use --version here, but apparently some GNU lds only accept -v.
> -case `$LD -v 2>&1 </dev/null` in
> -*GNU* | *'with BFD'*)
> -  lt_cv_prog_gnu_ld=yes
> -  ;;
> -*)
> -  lt_cv_prog_gnu_ld=no
> -  ;;
> -esac
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
> -$as_echo "$lt_cv_prog_gnu_ld" >&6; }
> -with_gnu_ld=$lt_cv_prog_gnu_ld
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
> -$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
> -if ${lt_cv_path_NM+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$NM"; then
> -  # Let the user override the test.
> -  lt_cv_path_NM="$NM"
> -else
> -  lt_nm_to_check="${ac_tool_prefix}nm"
> -  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
> -    lt_nm_to_check="$lt_nm_to_check nm"
> -  fi
> -  for lt_tmp_nm in $lt_nm_to_check; do
> -    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
> -    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
> -      IFS="$lt_save_ifs"
> -      test -z "$ac_dir" && ac_dir=.
> -      tmp_nm="$ac_dir/$lt_tmp_nm"
> -      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
> -	# Check to see if the nm accepts a BSD-compat flag.
> -	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
> -	#   nm: unknown option "B" ignored
> -	# Tru64's nm complains that /dev/null is an invalid object file
> -	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
> -	*/dev/null* | *'Invalid file or object type'*)
> -	  lt_cv_path_NM="$tmp_nm -B"
> -	  break
> -	  ;;
> -	*)
> -	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
> -	  */dev/null*)
> -	    lt_cv_path_NM="$tmp_nm -p"
> -	    break
> -	    ;;
> -	  *)
> -	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
> -	    continue # so that we can try to find one that supports BSD flags
> -	    ;;
> -	  esac
> -	  ;;
> -	esac
> -      fi
> -    done
> -    IFS="$lt_save_ifs"
> -  done
> -  : ${lt_cv_path_NM=no}
> -fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
> -$as_echo "$lt_cv_path_NM" >&6; }
> -if test "$lt_cv_path_NM" != "no"; then
> -  NM="$lt_cv_path_NM"
> -else
> -  # Didn't find any BSD compatible name lister, look for dumpbin.
> -  if test -n "$DUMPBIN"; then :
> -    # Let the user override the test.
> -  else
> -    if test -n "$ac_tool_prefix"; then
> -  for ac_prog in dumpbin "link -dump"
> -  do
> -    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
> -set dummy $ac_tool_prefix$ac_prog; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_DUMPBIN+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$DUMPBIN"; then
> -  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -DUMPBIN=$ac_cv_prog_DUMPBIN
> -if test -n "$DUMPBIN"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
> -$as_echo "$DUMPBIN" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -    test -n "$DUMPBIN" && break
> -  done
> -fi
> -if test -z "$DUMPBIN"; then
> -  ac_ct_DUMPBIN=$DUMPBIN
> -  for ac_prog in dumpbin "link -dump"
> -do
> -  # Extract the first word of "$ac_prog", so it can be a program name with args.
> -set dummy $ac_prog; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_DUMPBIN"; then
> -  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
> -if test -n "$ac_ct_DUMPBIN"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
> -$as_echo "$ac_ct_DUMPBIN" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -  test -n "$ac_ct_DUMPBIN" && break
> -done
> -
> -  if test "x$ac_ct_DUMPBIN" = x; then
> -    DUMPBIN=":"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    DUMPBIN=$ac_ct_DUMPBIN
> -  fi
> -fi
> -
> -    case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
> -    *COFF*)
> -      DUMPBIN="$DUMPBIN -symbols"
> -      ;;
> -    *)
> -      DUMPBIN=:
> -      ;;
> -    esac
> -  fi
> -
> -  if test "$DUMPBIN" != ":"; then
> -    NM="$DUMPBIN"
> -  fi
> -fi
> -test -z "$NM" && NM=nm
> -
> -
> -
> -
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
> -$as_echo_n "checking the name lister ($NM) interface... " >&6; }
> -if ${lt_cv_nm_interface+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_nm_interface="BSD nm"
> -  echo "int some_variable = 0;" > conftest.$ac_ext
> -  (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
> -  (eval "$ac_compile" 2>conftest.err)
> -  cat conftest.err >&5
> -  (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
> -  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
> -  cat conftest.err >&5
> -  (eval echo "\"\$as_me:$LINENO: output\"" >&5)
> -  cat conftest.out >&5
> -  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
> -    lt_cv_nm_interface="MS dumpbin"
> -  fi
> -  rm -f conftest*
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
> -$as_echo "$lt_cv_nm_interface" >&6; }
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
> -$as_echo_n "checking whether ln -s works... " >&6; }
> -LN_S=$as_ln_s
> -if test "$LN_S" = "ln -s"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
> -$as_echo "yes" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
> -$as_echo "no, using $LN_S" >&6; }
> -fi
> -
> -# find the maximum length of command line arguments
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
> -$as_echo_n "checking the maximum length of command line arguments... " >&6; }
> -if ${lt_cv_sys_max_cmd_len+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -    i=0
> -  teststring="ABCD"
> -
> -  case $build_os in
> -  msdosdjgpp*)
> -    # On DJGPP, this test can blow up pretty badly due to problems in libc
> -    # (any single argument exceeding 2000 bytes causes a buffer overrun
> -    # during glob expansion).  Even if it were fixed, the result of this
> -    # check would be larger than it should be.
> -    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
> -    ;;
> -
> -  gnu*)
> -    # Under GNU Hurd, this test is not required because there is
> -    # no limit to the length of command line arguments.
> -    # Libtool will interpret -1 as no limit whatsoever
> -    lt_cv_sys_max_cmd_len=-1;
> -    ;;
> -
> -  cygwin* | mingw* | cegcc*)
> -    # On Win9x/ME, this test blows up -- it succeeds, but takes
> -    # about 5 minutes as the teststring grows exponentially.
> -    # Worse, since 9x/ME are not pre-emptively multitasking,
> -    # you end up with a "frozen" computer, even though with patience
> -    # the test eventually succeeds (with a max line length of 256k).
> -    # Instead, let's just punt: use the minimum linelength reported by
> -    # all of the supported platforms: 8192 (on NT/2K/XP).
> -    lt_cv_sys_max_cmd_len=8192;
> -    ;;
> -
> -  mint*)
> -    # On MiNT this can take a long time and run out of memory.
> -    lt_cv_sys_max_cmd_len=8192;
> -    ;;
> -
> -  amigaos*)
> -    # On AmigaOS with pdksh, this test takes hours, literally.
> -    # So we just punt and use a minimum line length of 8192.
> -    lt_cv_sys_max_cmd_len=8192;
> -    ;;
> -
> -  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
> -    # This has been around since 386BSD, at least.  Likely further.
> -    if test -x /sbin/sysctl; then
> -      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
> -    elif test -x /usr/sbin/sysctl; then
> -      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
> -    else
> -      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
> -    fi
> -    # And add a safety zone
> -    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
> -    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
> -    ;;
> -
> -  interix*)
> -    # We know the value 262144 and hardcode it with a safety zone (like BSD)
> -    lt_cv_sys_max_cmd_len=196608
> -    ;;
> -
> -  osf*)
> -    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
> -    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
> -    # nice to cause kernel panics so lets avoid the loop below.
> -    # First set a reasonable default.
> -    lt_cv_sys_max_cmd_len=16384
> -    #
> -    if test -x /sbin/sysconfig; then
> -      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
> -        *1*) lt_cv_sys_max_cmd_len=-1 ;;
> -      esac
> -    fi
> -    ;;
> -  sco3.2v5*)
> -    lt_cv_sys_max_cmd_len=102400
> -    ;;
> -  sysv5* | sco5v6* | sysv4.2uw2*)
> -    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
> -    if test -n "$kargmax"; then
> -      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
> -    else
> -      lt_cv_sys_max_cmd_len=32768
> -    fi
> -    ;;
> -  *)
> -    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
> -    if test -n "$lt_cv_sys_max_cmd_len"; then
> -      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
> -      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
> -    else
> -      # Make teststring a little bigger before we do anything with it.
> -      # a 1K string should be a reasonable start.
> -      for i in 1 2 3 4 5 6 7 8 ; do
> -        teststring=$teststring$teststring
> -      done
> -      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
> -      # If test is not a shell built-in, we'll probably end up computing a
> -      # maximum length that is only half of the actual maximum length, but
> -      # we can't tell.
> -      while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \
> -	         = "X$teststring$teststring"; } >/dev/null 2>&1 &&
> -	      test $i != 17 # 1/2 MB should be enough
> -      do
> -        i=`expr $i + 1`
> -        teststring=$teststring$teststring
> -      done
> -      # Only check the string length outside the loop.
> -      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
> -      teststring=
> -      # Add a significant safety factor because C++ compilers can tack on
> -      # massive amounts of additional arguments before passing them to the
> -      # linker.  It appears as though 1/2 is a usable value.
> -      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
> -    fi
> -    ;;
> -  esac
> -
> -fi
> -
> -if test -n $lt_cv_sys_max_cmd_len ; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
> -$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
> -$as_echo "none" >&6; }
> -fi
> -max_cmd_len=$lt_cv_sys_max_cmd_len
> -
> -
> -
> -
> -
> -
> -: ${CP="cp -f"}
> -: ${MV="mv -f"}
> -: ${RM="rm -f"}
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
> -$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
> -# Try some XSI features
> -xsi_shell=no
> -( _lt_dummy="a/b/c"
> -  test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
> -      = c,a/b,b/c, \
> -    && eval 'test $(( 1 + 1 )) -eq 2 \
> -    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
> -  && xsi_shell=yes
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
> -$as_echo "$xsi_shell" >&6; }
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
> -$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
> -lt_shell_append=no
> -( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
> -    >/dev/null 2>&1 \
> -  && lt_shell_append=yes
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
> -$as_echo "$lt_shell_append" >&6; }
> -
> -
> -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
> -  lt_unset=unset
> -else
> -  lt_unset=false
> -fi
> -
> -
> -
> -
> -
> -# test EBCDIC or ASCII
> -case `echo X|tr X '\101'` in
> - A) # ASCII based system
> -    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
> -  lt_SP2NL='tr \040 \012'
> -  lt_NL2SP='tr \015\012 \040\040'
> -  ;;
> - *) # EBCDIC based system
> -  lt_SP2NL='tr \100 \n'
> -  lt_NL2SP='tr \r\n \100\100'
> -  ;;
> -esac
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
> -$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
> -if ${lt_cv_to_host_file_cmd+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  case $host in
> -  *-*-mingw* )
> -    case $build in
> -      *-*-mingw* ) # actually msys
> -        lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
> -        ;;
> -      *-*-cygwin* )
> -        lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
> -        ;;
> -      * ) # otherwise, assume *nix
> -        lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
> -        ;;
> -    esac
> -    ;;
> -  *-*-cygwin* )
> -    case $build in
> -      *-*-mingw* ) # actually msys
> -        lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
> -        ;;
> -      *-*-cygwin* )
> -        lt_cv_to_host_file_cmd=func_convert_file_noop
> -        ;;
> -      * ) # otherwise, assume *nix
> -        lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
> -        ;;
> -    esac
> -    ;;
> -  * ) # unhandled hosts (and "normal" native builds)
> -    lt_cv_to_host_file_cmd=func_convert_file_noop
> -    ;;
> -esac
> -
> -fi
> -
> -to_host_file_cmd=$lt_cv_to_host_file_cmd
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
> -$as_echo "$lt_cv_to_host_file_cmd" >&6; }
> -
> -
> -
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
> -$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
> -if ${lt_cv_to_tool_file_cmd+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  #assume ordinary cross tools, or native build.
> -lt_cv_to_tool_file_cmd=func_convert_file_noop
> -case $host in
> -  *-*-mingw* )
> -    case $build in
> -      *-*-mingw* ) # actually msys
> -        lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
> -        ;;
> -    esac
> -    ;;
> -esac
> -
> -fi
> -
> -to_tool_file_cmd=$lt_cv_to_tool_file_cmd
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
> -$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
> -
> -
> -
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
> -$as_echo_n "checking for $LD option to reload object files... " >&6; }
> -if ${lt_cv_ld_reload_flag+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_ld_reload_flag='-r'
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
> -$as_echo "$lt_cv_ld_reload_flag" >&6; }
> -reload_flag=$lt_cv_ld_reload_flag
> -case $reload_flag in
> -"" | " "*) ;;
> -*) reload_flag=" $reload_flag" ;;
> -esac
> -reload_cmds='$LD$reload_flag -o $output$reload_objs'
> -case $host_os in
> -  cygwin* | mingw* | pw32* | cegcc*)
> -    if test "$GCC" != yes; then
> -      reload_cmds=false
> -    fi
> -    ;;
> -  darwin*)
> -    if test "$GCC" = yes; then
> -      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
> -    else
> -      reload_cmds='$LD$reload_flag -o $output$reload_objs'
> -    fi
> -    ;;
> -esac
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -if test -n "$ac_tool_prefix"; then
> -  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}objdump; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_OBJDUMP+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$OBJDUMP"; then
> -  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -OBJDUMP=$ac_cv_prog_OBJDUMP
> -if test -n "$OBJDUMP"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
> -$as_echo "$OBJDUMP" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$ac_cv_prog_OBJDUMP"; then
> -  ac_ct_OBJDUMP=$OBJDUMP
> -  # Extract the first word of "objdump", so it can be a program name with args.
> -set dummy objdump; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_OBJDUMP"; then
> -  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_OBJDUMP="objdump"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
> -if test -n "$ac_ct_OBJDUMP"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
> -$as_echo "$ac_ct_OBJDUMP" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -  if test "x$ac_ct_OBJDUMP" = x; then
> -    OBJDUMP="false"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    OBJDUMP=$ac_ct_OBJDUMP
> -  fi
> -else
> -  OBJDUMP="$ac_cv_prog_OBJDUMP"
> -fi
> -
> -test -z "$OBJDUMP" && OBJDUMP=objdump
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
> -$as_echo_n "checking how to recognize dependent libraries... " >&6; }
> -if ${lt_cv_deplibs_check_method+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_file_magic_cmd='$MAGIC_CMD'
> -lt_cv_file_magic_test_file=
> -lt_cv_deplibs_check_method='unknown'
> -# Need to set the preceding variable on all platforms that support
> -# interlibrary dependencies.
> -# 'none' -- dependencies not supported.
> -# `unknown' -- same as none, but documents that we really don't know.
> -# 'pass_all' -- all dependencies passed with no checks.
> -# 'test_compile' -- check by making test program.
> -# 'file_magic [[regex]]' -- check by looking for files in library path
> -# which responds to the $file_magic_cmd with a given extended regex.
> -# If you have `file' or equivalent on your system and you're not sure
> -# whether `pass_all' will *always* work, you probably want this one.
> -
> -case $host_os in
> -aix[4-9]*)
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -
> -beos*)
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -
> -bsdi[45]*)
> -  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
> -  lt_cv_file_magic_cmd='/usr/bin/file -L'
> -  lt_cv_file_magic_test_file=/shlib/libc.so
> -  ;;
> -
> -cygwin*)
> -  # func_win32_libid is a shell function defined in ltmain.sh
> -  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
> -  lt_cv_file_magic_cmd='func_win32_libid'
> -  ;;
> -
> -mingw* | pw32*)
> -  # Base MSYS/MinGW do not provide the 'file' command needed by
> -  # func_win32_libid shell function, so use a weaker test based on 'objdump',
> -  # unless we find 'file', for example because we are cross-compiling.
> -  # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
> -  if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
> -    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
> -    lt_cv_file_magic_cmd='func_win32_libid'
> -  else
> -    # Keep this pattern in sync with the one in func_win32_libid.
> -    lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
> -    lt_cv_file_magic_cmd='$OBJDUMP -f'
> -  fi
> -  ;;
> -
> -cegcc*)
> -  # use the weaker test based on 'objdump'. See mingw*.
> -  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
> -  lt_cv_file_magic_cmd='$OBJDUMP -f'
> -  ;;
> -
> -darwin* | rhapsody*)
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -
> -freebsd* | dragonfly*)
> -  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
> -    case $host_cpu in
> -    i*86 )
> -      # Not sure whether the presence of OpenBSD here was a mistake.
> -      # Let's accept both of them until this is cleared up.
> -      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
> -      lt_cv_file_magic_cmd=/usr/bin/file
> -      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
> -      ;;
> -    esac
> -  else
> -    lt_cv_deplibs_check_method=pass_all
> -  fi
> -  ;;
> -
> -gnu*)
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -
> -haiku*)
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -
> -hpux10.20* | hpux11*)
> -  lt_cv_file_magic_cmd=/usr/bin/file
> -  case $host_cpu in
> -  ia64*)
> -    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
> -    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
> -    ;;
> -  hppa*64*)
> -    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
> -    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
> -    ;;
> -  *)
> -    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
> -    lt_cv_file_magic_test_file=/usr/lib/libc.sl
> -    ;;
> -  esac
> -  ;;
> -
> -interix[3-9]*)
> -  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
> -  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
> -  ;;
> -
> -irix5* | irix6* | nonstopux*)
> -  case $LD in
> -  *-32|*"-32 ") libmagic=32-bit;;
> -  *-n32|*"-n32 ") libmagic=N32;;
> -  *-64|*"-64 ") libmagic=64-bit;;
> -  *) libmagic=never-match;;
> -  esac
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -
> -# This must be Linux ELF.
> -linux* | k*bsd*-gnu | kopensolaris*-gnu)
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -
> -netbsd* | netbsdelf*-gnu)
> -  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
> -    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
> -  else
> -    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
> -  fi
> -  ;;
> -
> -newos6*)
> -  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
> -  lt_cv_file_magic_cmd=/usr/bin/file
> -  lt_cv_file_magic_test_file=/usr/lib/libnls.so
> -  ;;
> -
> -*nto* | *qnx*)
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -
> -openbsd*)
> -  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
> -    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
> -  else
> -    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
> -  fi
> -  ;;
> -
> -osf3* | osf4* | osf5*)
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -
> -rdos*)
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -
> -solaris*)
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -
> -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -
> -sysv4 | sysv4.3*)
> -  case $host_vendor in
> -  motorola)
> -    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
> -    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
> -    ;;
> -  ncr)
> -    lt_cv_deplibs_check_method=pass_all
> -    ;;
> -  sequent)
> -    lt_cv_file_magic_cmd='/bin/file'
> -    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
> -    ;;
> -  sni)
> -    lt_cv_file_magic_cmd='/bin/file'
> -    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
> -    lt_cv_file_magic_test_file=/lib/libc.so
> -    ;;
> -  siemens)
> -    lt_cv_deplibs_check_method=pass_all
> -    ;;
> -  pc)
> -    lt_cv_deplibs_check_method=pass_all
> -    ;;
> -  esac
> -  ;;
> -
> -tpf*)
> -  lt_cv_deplibs_check_method=pass_all
> -  ;;
> -esac
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
> -$as_echo "$lt_cv_deplibs_check_method" >&6; }
> -
> -file_magic_glob=
> -want_nocaseglob=no
> -if test "$build" = "$host"; then
> -  case $host_os in
> -  mingw* | pw32*)
> -    if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
> -      want_nocaseglob=yes
> -    else
> -      file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
> -    fi
> -    ;;
> -  esac
> -fi
> -
> -file_magic_cmd=$lt_cv_file_magic_cmd
> -deplibs_check_method=$lt_cv_deplibs_check_method
> -test -z "$deplibs_check_method" && deplibs_check_method=unknown
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -if test -n "$ac_tool_prefix"; then
> -  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}dlltool; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_DLLTOOL+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$DLLTOOL"; then
> -  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -DLLTOOL=$ac_cv_prog_DLLTOOL
> -if test -n "$DLLTOOL"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
> -$as_echo "$DLLTOOL" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$ac_cv_prog_DLLTOOL"; then
> -  ac_ct_DLLTOOL=$DLLTOOL
> -  # Extract the first word of "dlltool", so it can be a program name with args.
> -set dummy dlltool; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_DLLTOOL"; then
> -  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
> -if test -n "$ac_ct_DLLTOOL"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
> -$as_echo "$ac_ct_DLLTOOL" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -  if test "x$ac_ct_DLLTOOL" = x; then
> -    DLLTOOL="false"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    DLLTOOL=$ac_ct_DLLTOOL
> -  fi
> -else
> -  DLLTOOL="$ac_cv_prog_DLLTOOL"
> -fi
> -
> -test -z "$DLLTOOL" && DLLTOOL=dlltool
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
> -$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
> -if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_sharedlib_from_linklib_cmd='unknown'
> -
> -case $host_os in
> -cygwin* | mingw* | pw32* | cegcc*)
> -  # two different shell functions defined in ltmain.sh
> -  # decide which to use based on capabilities of $DLLTOOL
> -  case `$DLLTOOL --help 2>&1` in
> -  *--identify-strict*)
> -    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
> -    ;;
> -  *)
> -    lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
> -    ;;
> -  esac
> -  ;;
> -*)
> -  # fallback: assume linklib IS sharedlib
> -  lt_cv_sharedlib_from_linklib_cmd="$ECHO"
> -  ;;
> -esac
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
> -$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
> -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
> -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
> -
> -
> -
> -
> -
> -
> -
> -if test -n "$ac_tool_prefix"; then
> -  for ac_prog in ar
> -  do
> -    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
> -set dummy $ac_tool_prefix$ac_prog; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_AR+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$AR"; then
> -  ac_cv_prog_AR="$AR" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -AR=$ac_cv_prog_AR
> -if test -n "$AR"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
> -$as_echo "$AR" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -    test -n "$AR" && break
> -  done
> -fi
> -if test -z "$AR"; then
> -  ac_ct_AR=$AR
> -  for ac_prog in ar
> -do
> -  # Extract the first word of "$ac_prog", so it can be a program name with args.
> -set dummy $ac_prog; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_AR+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_AR"; then
> -  ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_AR="$ac_prog"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_AR=$ac_cv_prog_ac_ct_AR
> -if test -n "$ac_ct_AR"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
> -$as_echo "$ac_ct_AR" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -  test -n "$ac_ct_AR" && break
> -done
> -
> -  if test "x$ac_ct_AR" = x; then
> -    AR="false"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    AR=$ac_ct_AR
> -  fi
> -fi
> -
> -: ${AR=ar}
> -: ${AR_FLAGS=cru}
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
> -$as_echo_n "checking for archiver @FILE support... " >&6; }
> -if ${lt_cv_ar_at_file+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_ar_at_file=no
> -   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -int
> -main ()
> -{
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_compile "$LINENO"; then :
> -  echo conftest.$ac_objext > conftest.lst
> -      lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
> -      { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
> -  (eval $lt_ar_try) 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }
> -      if test "$ac_status" -eq 0; then
> -	# Ensure the archiver fails upon bogus file names.
> -	rm -f conftest.$ac_objext libconftest.a
> -	{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
> -  (eval $lt_ar_try) 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }
> -	if test "$ac_status" -ne 0; then
> -          lt_cv_ar_at_file=@
> -        fi
> -      fi
> -      rm -f conftest.* libconftest.a
> -
> -fi
> -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
> -$as_echo "$lt_cv_ar_at_file" >&6; }
> -
> -if test "x$lt_cv_ar_at_file" = xno; then
> -  archiver_list_spec=
> -else
> -  archiver_list_spec=$lt_cv_ar_at_file
> -fi
> -
> -
> -
> -
> -
> -
> -
> -if test -n "$ac_tool_prefix"; then
> -  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}strip; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_STRIP+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$STRIP"; then
> -  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -STRIP=$ac_cv_prog_STRIP
> -if test -n "$STRIP"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
> -$as_echo "$STRIP" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$ac_cv_prog_STRIP"; then
> -  ac_ct_STRIP=$STRIP
> -  # Extract the first word of "strip", so it can be a program name with args.
> -set dummy strip; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_STRIP"; then
> -  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_STRIP="strip"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
> -if test -n "$ac_ct_STRIP"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
> -$as_echo "$ac_ct_STRIP" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -  if test "x$ac_ct_STRIP" = x; then
> -    STRIP=":"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    STRIP=$ac_ct_STRIP
> -  fi
> -else
> -  STRIP="$ac_cv_prog_STRIP"
> -fi
> -
> -test -z "$STRIP" && STRIP=:
> -
> -
> -
> -
> -
> -
> -if test -n "$ac_tool_prefix"; then
> -  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}ranlib; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_RANLIB+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$RANLIB"; then
> -  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -RANLIB=$ac_cv_prog_RANLIB
> -if test -n "$RANLIB"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
> -$as_echo "$RANLIB" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$ac_cv_prog_RANLIB"; then
> -  ac_ct_RANLIB=$RANLIB
> -  # Extract the first word of "ranlib", so it can be a program name with args.
> -set dummy ranlib; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_RANLIB"; then
> -  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_RANLIB="ranlib"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
> -if test -n "$ac_ct_RANLIB"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
> -$as_echo "$ac_ct_RANLIB" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -  if test "x$ac_ct_RANLIB" = x; then
> -    RANLIB=":"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    RANLIB=$ac_ct_RANLIB
> -  fi
> -else
> -  RANLIB="$ac_cv_prog_RANLIB"
> -fi
> -
> -test -z "$RANLIB" && RANLIB=:
> -
> -
> -
> -
> -
> -
> -# Determine commands to create old-style static archives.
> -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
> -old_postinstall_cmds='chmod 644 $oldlib'
> -old_postuninstall_cmds=
> -
> -if test -n "$RANLIB"; then
> -  case $host_os in
> -  openbsd*)
> -    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
> -    ;;
> -  *)
> -    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
> -    ;;
> -  esac
> -  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
> -fi
> -
> -case $host_os in
> -  darwin*)
> -    lock_old_archive_extraction=yes ;;
> -  *)
> -    lock_old_archive_extraction=no ;;
> -esac
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -# If no C compiler was specified, use CC.
> -LTCC=${LTCC-"$CC"}
> -
> -# If no C compiler flags were specified, use CFLAGS.
> -LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
> -
> -# Allow CC to be a program name with arguments.
> -compiler=$CC
> -
> -
> -# Check for command to grab the raw symbol name followed by C symbol from nm.
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
> -$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
> -if ${lt_cv_sys_global_symbol_pipe+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -
> -# These are sane defaults that work on at least a few old systems.
> -# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
> -
> -# Character class describing NM global symbol codes.
> -symcode='[BCDEGRST]'
> -
> -# Regexp to match symbols that can be accessed directly from C.
> -sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
> -
> -# Define system-specific variables.
> -case $host_os in
> -aix*)
> -  symcode='[BCDT]'
> -  ;;
> -cygwin* | mingw* | pw32* | cegcc*)
> -  symcode='[ABCDGISTW]'
> -  ;;
> -hpux*)
> -  if test "$host_cpu" = ia64; then
> -    symcode='[ABCDEGRST]'
> -  fi
> -  ;;
> -irix* | nonstopux*)
> -  symcode='[BCDEGRST]'
> -  ;;
> -osf*)
> -  symcode='[BCDEGQRST]'
> -  ;;
> -solaris*)
> -  symcode='[BDRT]'
> -  ;;
> -sco3.2v5*)
> -  symcode='[DT]'
> -  ;;
> -sysv4.2uw2*)
> -  symcode='[DT]'
> -  ;;
> -sysv5* | sco5v6* | unixware* | OpenUNIX*)
> -  symcode='[ABDT]'
> -  ;;
> -sysv4)
> -  symcode='[DFNSTU]'
> -  ;;
> -esac
> -
> -# If we're using GNU nm, then use its standard symbol codes.
> -case `$NM -V 2>&1` in
> -*GNU* | *'with BFD'*)
> -  symcode='[ABCDGIRSTW]' ;;
> -esac
> -
> -# Transform an extracted symbol line into a proper C declaration.
> -# Some systems (esp. on ia64) link data and code symbols differently,
> -# so use this general approach.
> -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
> -
> -# Transform an extracted symbol line into symbol name and symbol address
> -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
> -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
> -
> -# Handle CRLF in mingw tool chain
> -opt_cr=
> -case $build_os in
> -mingw*)
> -  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
> -  ;;
> -esac
> -
> -# Try without a prefix underscore, then with it.
> -for ac_symprfx in "" "_"; do
> -
> -  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
> -  symxfrm="\\1 $ac_symprfx\\2 \\2"
> -
> -  # Write the raw and C identifiers.
> -  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
> -    # Fake it for dumpbin and say T for any non-static function
> -    # and D for any global variable.
> -    # Also find C++ and __fastcall symbols from MSVC++,
> -    # which start with @ or ?.
> -    lt_cv_sys_global_symbol_pipe="$AWK '"\
> -"     {last_section=section; section=\$ 3};"\
> -"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
> -"     \$ 0!~/External *\|/{next};"\
> -"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
> -"     {if(hide[section]) next};"\
> -"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
> -"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
> -"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
> -"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
> -"     ' prfx=^$ac_symprfx"
> -  else
> -    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
> -  fi
> -  lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
> -
> -  # Check to see that the pipe works correctly.
> -  pipe_works=no
> -
> -  rm -f conftest*
> -  cat > conftest.$ac_ext <<_LT_EOF
> -#ifdef __cplusplus
> -extern "C" {
> -#endif
> -char nm_test_var;
> -void nm_test_func(void);
> -void nm_test_func(void){}
> -#ifdef __cplusplus
> -}
> -#endif
> -int main(){nm_test_var='a';nm_test_func();return(0);}
> -_LT_EOF
> -
> -  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
> -  (eval $ac_compile) 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }; then
> -    # Now try to grab the symbols.
> -    nlist=conftest.nm
> -    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
> -  (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; } && test -s "$nlist"; then
> -      # Try sorting and uniquifying the output.
> -      if sort "$nlist" | uniq > "$nlist"T; then
> -	mv -f "$nlist"T "$nlist"
> -      else
> -	rm -f "$nlist"T
> -      fi
> -
> -      # Make sure that we snagged all the symbols we need.
> -      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
> -	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
> -	  cat <<_LT_EOF > conftest.$ac_ext
> -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests.  */
> -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
> -/* DATA imports from DLLs on WIN32 con't be const, because runtime
> -   relocations are performed -- see ld's documentation on pseudo-relocs.  */
> -# define LT_DLSYM_CONST
> -#elif defined(__osf__)
> -/* This system does not cope well with relocations in const data.  */
> -# define LT_DLSYM_CONST
> -#else
> -# define LT_DLSYM_CONST const
> -#endif
> -
> -#ifdef __cplusplus
> -extern "C" {
> -#endif
> -
> -_LT_EOF
> -	  # Now generate the symbol file.
> -	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
> -
> -	  cat <<_LT_EOF >> conftest.$ac_ext
> -
> -/* The mapping between symbol names and symbols.  */
> -LT_DLSYM_CONST struct {
> -  const char *name;
> -  void       *address;
> -}
> -lt__PROGRAM__LTX_preloaded_symbols[] =
> -{
> -  { "@PROGRAM@", (void *) 0 },
> -_LT_EOF
> -	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
> -	  cat <<\_LT_EOF >> conftest.$ac_ext
> -  {0, (void *) 0}
> -};
> -
> -/* This works around a problem in FreeBSD linker */
> -#ifdef FREEBSD_WORKAROUND
> -static const void *lt_preloaded_setup() {
> -  return lt__PROGRAM__LTX_preloaded_symbols;
> -}
> -#endif
> -
> -#ifdef __cplusplus
> -}
> -#endif
> -_LT_EOF
> -	  # Now try linking the two files.
> -	  mv conftest.$ac_objext conftstm.$ac_objext
> -	  lt_globsym_save_LIBS=$LIBS
> -	  lt_globsym_save_CFLAGS=$CFLAGS
> -	  LIBS="conftstm.$ac_objext"
> -	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
> -	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
> -  (eval $ac_link) 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
> -	    pipe_works=yes
> -	  fi
> -	  LIBS=$lt_globsym_save_LIBS
> -	  CFLAGS=$lt_globsym_save_CFLAGS
> -	else
> -	  echo "cannot find nm_test_func in $nlist" >&5
> -	fi
> -      else
> -	echo "cannot find nm_test_var in $nlist" >&5
> -      fi
> -    else
> -      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
> -    fi
> -  else
> -    echo "$progname: failed program was:" >&5
> -    cat conftest.$ac_ext >&5
> -  fi
> -  rm -rf conftest* conftst*
> -
> -  # Do not use the global_symbol_pipe unless it works.
> -  if test "$pipe_works" = yes; then
> -    break
> -  else
> -    lt_cv_sys_global_symbol_pipe=
> -  fi
> -done
> -
> -fi
> -
> -if test -z "$lt_cv_sys_global_symbol_pipe"; then
> -  lt_cv_sys_global_symbol_to_cdecl=
> -fi
> -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
> -$as_echo "failed" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
> -$as_echo "ok" >&6; }
> -fi
> -
> -# Response file support.
> -if test "$lt_cv_nm_interface" = "MS dumpbin"; then
> -  nm_file_list_spec='@'
> -elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
> -  nm_file_list_spec='@'
> -fi
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
> -$as_echo_n "checking for sysroot... " >&6; }
> -
> -# Check whether --with-sysroot was given.
> -if test "${with_sysroot+set}" = set; then :
> -  withval=$with_sysroot;
> -else
> -  with_sysroot=no
> -fi
> -
> -
> -lt_sysroot=
> -case ${with_sysroot} in #(
> - yes)
> -   if test "$GCC" = yes; then
> -     lt_sysroot=`$CC --print-sysroot 2>/dev/null`
> -   fi
> -   ;; #(
> - /*)
> -   lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
> -   ;; #(
> - no|'')
> -   ;; #(
> - *)
> -   { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
> -$as_echo "${with_sysroot}" >&6; }
> -   as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
> -   ;;
> -esac
> -
> - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
> -$as_echo "${lt_sysroot:-no}" >&6; }
> -
> -
> -
> -
> -
> -# Check whether --enable-libtool-lock was given.
> -if test "${enable_libtool_lock+set}" = set; then :
> -  enableval=$enable_libtool_lock;
> -fi
> -
> -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
> -
> -# Some flags need to be propagated to the compiler or linker for good
> -# libtool support.
> -case $host in
> -ia64-*-hpux*)
> -  # Find out which ABI we are using.
> -  echo 'int i;' > conftest.$ac_ext
> -  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
> -  (eval $ac_compile) 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }; then
> -    case `/usr/bin/file conftest.$ac_objext` in
> -      *ELF-32*)
> -	HPUX_IA64_MODE="32"
> -	;;
> -      *ELF-64*)
> -	HPUX_IA64_MODE="64"
> -	;;
> -    esac
> -  fi
> -  rm -rf conftest*
> -  ;;
> -*-*-irix6*)
> -  # Find out which ABI we are using.
> -  echo '#line '$LINENO' "configure"' > conftest.$ac_ext
> -  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
> -  (eval $ac_compile) 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }; then
> -    if test "$lt_cv_prog_gnu_ld" = yes; then
> -      case `/usr/bin/file conftest.$ac_objext` in
> -	*32-bit*)
> -	  LD="${LD-ld} -melf32bsmip"
> -	  ;;
> -	*N32*)
> -	  LD="${LD-ld} -melf32bmipn32"
> -	  ;;
> -	*64-bit*)
> -	  LD="${LD-ld} -melf64bmip"
> -	;;
> -      esac
> -    else
> -      case `/usr/bin/file conftest.$ac_objext` in
> -	*32-bit*)
> -	  LD="${LD-ld} -32"
> -	  ;;
> -	*N32*)
> -	  LD="${LD-ld} -n32"
> -	  ;;
> -	*64-bit*)
> -	  LD="${LD-ld} -64"
> -	  ;;
> -      esac
> -    fi
> -  fi
> -  rm -rf conftest*
> -  ;;
> -
> -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
> -s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
> -  # Find out which ABI we are using.
> -  echo 'int i;' > conftest.$ac_ext
> -  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
> -  (eval $ac_compile) 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }; then
> -    case `/usr/bin/file conftest.o` in
> -      *32-bit*)
> -	case $host in
> -	  x86_64-*kfreebsd*-gnu)
> -	    LD="${LD-ld} -m elf_i386_fbsd"
> -	    ;;
> -	  x86_64-*linux*)
> -	    LD="${LD-ld} -m elf_i386"
> -	    ;;
> -	  ppc64-*linux*|powerpc64-*linux*)
> -	    LD="${LD-ld} -m elf32ppclinux"
> -	    ;;
> -	  s390x-*linux*)
> -	    LD="${LD-ld} -m elf_s390"
> -	    ;;
> -	  sparc64-*linux*)
> -	    LD="${LD-ld} -m elf32_sparc"
> -	    ;;
> -	esac
> -	;;
> -      *64-bit*)
> -	case $host in
> -	  x86_64-*kfreebsd*-gnu)
> -	    LD="${LD-ld} -m elf_x86_64_fbsd"
> -	    ;;
> -	  x86_64-*linux*)
> -	    LD="${LD-ld} -m elf_x86_64"
> -	    ;;
> -	  ppc*-*linux*|powerpc*-*linux*)
> -	    LD="${LD-ld} -m elf64ppc"
> -	    ;;
> -	  s390*-*linux*|s390*-*tpf*)
> -	    LD="${LD-ld} -m elf64_s390"
> -	    ;;
> -	  sparc*-*linux*)
> -	    LD="${LD-ld} -m elf64_sparc"
> -	    ;;
> -	esac
> -	;;
> -    esac
> -  fi
> -  rm -rf conftest*
> -  ;;
> -
> -*-*-sco3.2v5*)
> -  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
> -  SAVE_CFLAGS="$CFLAGS"
> -  CFLAGS="$CFLAGS -belf"
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
> -$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
> -if ${lt_cv_cc_needs_belf+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  ac_ext=c
> -ac_cpp='$CPP $CPPFLAGS'
> -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
> -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
> -ac_compiler_gnu=$ac_cv_c_compiler_gnu
> -
> -     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -int
> -main ()
> -{
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -  lt_cv_cc_needs_belf=yes
> -else
> -  lt_cv_cc_needs_belf=no
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -     ac_ext=c
> -ac_cpp='$CPP $CPPFLAGS'
> -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
> -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
> -ac_compiler_gnu=$ac_cv_c_compiler_gnu
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
> -$as_echo "$lt_cv_cc_needs_belf" >&6; }
> -  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
> -    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
> -    CFLAGS="$SAVE_CFLAGS"
> -  fi
> -  ;;
> -sparc*-*solaris*)
> -  # Find out which ABI we are using.
> -  echo 'int i;' > conftest.$ac_ext
> -  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
> -  (eval $ac_compile) 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }; then
> -    case `/usr/bin/file conftest.o` in
> -    *64-bit*)
> -      case $lt_cv_prog_gnu_ld in
> -      yes*) LD="${LD-ld} -m elf64_sparc" ;;
> -      *)
> -	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
> -	  LD="${LD-ld} -64"
> -	fi
> -	;;
> -      esac
> -      ;;
> -    esac
> -  fi
> -  rm -rf conftest*
> -  ;;
> -esac
> -
> -need_locks="$enable_libtool_lock"
> -
> -if test -n "$ac_tool_prefix"; then
> -  # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}mt; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$MANIFEST_TOOL"; then
> -  ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
> -if test -n "$MANIFEST_TOOL"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
> -$as_echo "$MANIFEST_TOOL" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
> -  ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
> -  # Extract the first word of "mt", so it can be a program name with args.
> -set dummy mt; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_MANIFEST_TOOL"; then
> -  ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
> -if test -n "$ac_ct_MANIFEST_TOOL"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
> -$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -  if test "x$ac_ct_MANIFEST_TOOL" = x; then
> -    MANIFEST_TOOL=":"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
> -  fi
> -else
> -  MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
> -fi
> -
> -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
> -$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
> -if ${lt_cv_path_mainfest_tool+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_path_mainfest_tool=no
> -  echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
> -  $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
> -  cat conftest.err >&5
> -  if $GREP 'Manifest Tool' conftest.out > /dev/null; then
> -    lt_cv_path_mainfest_tool=yes
> -  fi
> -  rm -f conftest*
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
> -$as_echo "$lt_cv_path_mainfest_tool" >&6; }
> -if test "x$lt_cv_path_mainfest_tool" != xyes; then
> -  MANIFEST_TOOL=:
> -fi
> -
> -
> -
> -
> -
> -
> -  case $host_os in
> -    rhapsody* | darwin*)
> -    if test -n "$ac_tool_prefix"; then
> -  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_DSYMUTIL+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$DSYMUTIL"; then
> -  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -DSYMUTIL=$ac_cv_prog_DSYMUTIL
> -if test -n "$DSYMUTIL"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
> -$as_echo "$DSYMUTIL" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$ac_cv_prog_DSYMUTIL"; then
> -  ac_ct_DSYMUTIL=$DSYMUTIL
> -  # Extract the first word of "dsymutil", so it can be a program name with args.
> -set dummy dsymutil; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_DSYMUTIL"; then
> -  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
> -if test -n "$ac_ct_DSYMUTIL"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
> -$as_echo "$ac_ct_DSYMUTIL" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -  if test "x$ac_ct_DSYMUTIL" = x; then
> -    DSYMUTIL=":"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    DSYMUTIL=$ac_ct_DSYMUTIL
> -  fi
> -else
> -  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
> -fi
> -
> -    if test -n "$ac_tool_prefix"; then
> -  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}nmedit; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_NMEDIT+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$NMEDIT"; then
> -  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -NMEDIT=$ac_cv_prog_NMEDIT
> -if test -n "$NMEDIT"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
> -$as_echo "$NMEDIT" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$ac_cv_prog_NMEDIT"; then
> -  ac_ct_NMEDIT=$NMEDIT
> -  # Extract the first word of "nmedit", so it can be a program name with args.
> -set dummy nmedit; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_NMEDIT"; then
> -  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_NMEDIT="nmedit"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
> -if test -n "$ac_ct_NMEDIT"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
> -$as_echo "$ac_ct_NMEDIT" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -  if test "x$ac_ct_NMEDIT" = x; then
> -    NMEDIT=":"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    NMEDIT=$ac_ct_NMEDIT
> -  fi
> -else
> -  NMEDIT="$ac_cv_prog_NMEDIT"
> -fi
> -
> -    if test -n "$ac_tool_prefix"; then
> -  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}lipo; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_LIPO+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$LIPO"; then
> -  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -LIPO=$ac_cv_prog_LIPO
> -if test -n "$LIPO"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
> -$as_echo "$LIPO" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$ac_cv_prog_LIPO"; then
> -  ac_ct_LIPO=$LIPO
> -  # Extract the first word of "lipo", so it can be a program name with args.
> -set dummy lipo; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_LIPO"; then
> -  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_LIPO="lipo"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
> -if test -n "$ac_ct_LIPO"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
> -$as_echo "$ac_ct_LIPO" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -  if test "x$ac_ct_LIPO" = x; then
> -    LIPO=":"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    LIPO=$ac_ct_LIPO
> -  fi
> -else
> -  LIPO="$ac_cv_prog_LIPO"
> -fi
> -
> -    if test -n "$ac_tool_prefix"; then
> -  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}otool; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_OTOOL+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$OTOOL"; then
> -  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -OTOOL=$ac_cv_prog_OTOOL
> -if test -n "$OTOOL"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
> -$as_echo "$OTOOL" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$ac_cv_prog_OTOOL"; then
> -  ac_ct_OTOOL=$OTOOL
> -  # Extract the first word of "otool", so it can be a program name with args.
> -set dummy otool; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_OTOOL"; then
> -  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_OTOOL="otool"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
> -if test -n "$ac_ct_OTOOL"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
> -$as_echo "$ac_ct_OTOOL" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -  if test "x$ac_ct_OTOOL" = x; then
> -    OTOOL=":"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    OTOOL=$ac_ct_OTOOL
> -  fi
> -else
> -  OTOOL="$ac_cv_prog_OTOOL"
> -fi
> -
> -    if test -n "$ac_tool_prefix"; then
> -  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
> -set dummy ${ac_tool_prefix}otool64; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_OTOOL64+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$OTOOL64"; then
> -  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -OTOOL64=$ac_cv_prog_OTOOL64
> -if test -n "$OTOOL64"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
> -$as_echo "$OTOOL64" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -fi
> -if test -z "$ac_cv_prog_OTOOL64"; then
> -  ac_ct_OTOOL64=$OTOOL64
> -  # Extract the first word of "otool64", so it can be a program name with args.
> -set dummy otool64; ac_word=$2
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
> -$as_echo_n "checking for $ac_word... " >&6; }
> -if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  if test -n "$ac_ct_OTOOL64"; then
> -  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
> -else
> -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
> -for as_dir in $PATH
> -do
> -  IFS=$as_save_IFS
> -  test -z "$as_dir" && as_dir=.
> -    for ac_exec_ext in '' $ac_executable_extensions; do
> -  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
> -    ac_cv_prog_ac_ct_OTOOL64="otool64"
> -    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
> -    break 2
> -  fi
> -done
> -  done
> -IFS=$as_save_IFS
> -
> -fi
> -fi
> -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
> -if test -n "$ac_ct_OTOOL64"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
> -$as_echo "$ac_ct_OTOOL64" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -  if test "x$ac_ct_OTOOL64" = x; then
> -    OTOOL64=":"
> -  else
> -    case $cross_compiling:$ac_tool_warned in
> -yes:)
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
> -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
> -ac_tool_warned=yes ;;
> -esac
> -    OTOOL64=$ac_ct_OTOOL64
> -  fi
> -else
> -  OTOOL64="$ac_cv_prog_OTOOL64"
> -fi
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
> -$as_echo_n "checking for -single_module linker flag... " >&6; }
> -if ${lt_cv_apple_cc_single_mod+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_apple_cc_single_mod=no
> -      if test -z "${LT_MULTI_MODULE}"; then
> -	# By default we will add the -single_module flag. You can override
> -	# by either setting the environment variable LT_MULTI_MODULE
> -	# non-empty at configure time, or by adding -multi_module to the
> -	# link flags.
> -	rm -rf libconftest.dylib*
> -	echo "int foo(void){return 1;}" > conftest.c
> -	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
> --dynamiclib -Wl,-single_module conftest.c" >&5
> -	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
> -	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
> -        _lt_result=$?
> -	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
> -	  lt_cv_apple_cc_single_mod=yes
> -	else
> -	  cat conftest.err >&5
> -	fi
> -	rm -rf libconftest.dylib*
> -	rm -f conftest.*
> -      fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
> -$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
> -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
> -if ${lt_cv_ld_exported_symbols_list+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_ld_exported_symbols_list=no
> -      save_LDFLAGS=$LDFLAGS
> -      echo "_main" > conftest.sym
> -      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
> -      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -int
> -main ()
> -{
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -  lt_cv_ld_exported_symbols_list=yes
> -else
> -  lt_cv_ld_exported_symbols_list=no
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -	LDFLAGS="$save_LDFLAGS"
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
> -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
> -$as_echo_n "checking for -force_load linker flag... " >&6; }
> -if ${lt_cv_ld_force_load+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_ld_force_load=no
> -      cat > conftest.c << _LT_EOF
> -int forced_loaded() { return 2;}
> -_LT_EOF
> -      echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
> -      $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
> -      echo "$AR cru libconftest.a conftest.o" >&5
> -      $AR cru libconftest.a conftest.o 2>&5
> -      echo "$RANLIB libconftest.a" >&5
> -      $RANLIB libconftest.a 2>&5
> -      cat > conftest.c << _LT_EOF
> -int main() { return 0;}
> -_LT_EOF
> -      echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
> -      $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
> -      _lt_result=$?
> -      if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then
> -	lt_cv_ld_force_load=yes
> -      else
> -	cat conftest.err >&5
> -      fi
> -        rm -f conftest.err libconftest.a conftest conftest.c
> -        rm -rf conftest.dSYM
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
> -$as_echo "$lt_cv_ld_force_load" >&6; }
> -    case $host_os in
> -    rhapsody* | darwin1.[012])
> -      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
> -    darwin1.*)
> -      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
> -    darwin*) # darwin 5.x on
> -      # if running on 10.5 or later, the deployment target defaults
> -      # to the OS version, if on x86, and 10.4, the deployment
> -      # target defaults to 10.4. Don't you love it?
> -      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
> -	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
> -	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
> -	10.[012]*)
> -	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
> -	10.*)
> -	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
> -      esac
> -    ;;
> -  esac
> -    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
> -      _lt_dar_single_mod='$single_module'
> -    fi
> -    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
> -      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
> -    else
> -      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
> -    fi
> -    if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
> -      _lt_dsymutil='~$DSYMUTIL $lib || :'
> -    else
> -      _lt_dsymutil=
> -    fi
> -    ;;
> -  esac
> -
> -ac_ext=c
> -ac_cpp='$CPP $CPPFLAGS'
> -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
> -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
> -ac_compiler_gnu=$ac_cv_c_compiler_gnu
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
> -$as_echo_n "checking how to run the C preprocessor... " >&6; }
> -# On Suns, sometimes $CPP names a directory.
> -if test -n "$CPP" && test -d "$CPP"; then
> -  CPP=
> -fi
> -if test -z "$CPP"; then
> -  if ${ac_cv_prog_CPP+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -      # Double quotes because CPP needs to be expanded
> -    for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
> -    do
> -      ac_preproc_ok=false
> -for ac_c_preproc_warn_flag in '' yes
> -do
> -  # Use a header file that comes with gcc, so configuring glibc
> -  # with a fresh cross-compiler works.
> -  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
> -  # <limits.h> exists even on freestanding compilers.
> -  # On the NeXT, cc -E runs the code through the compiler's parser,
> -  # not just through cpp. "Syntax error" is here to catch this case.
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -#ifdef __STDC__
> -# include <limits.h>
> -#else
> -# include <assert.h>
> -#endif
> -		     Syntax error
> -_ACEOF
> -if ac_fn_c_try_cpp "$LINENO"; then :
> -
> -else
> -  # Broken: fails on valid input.
> -continue
> -fi
> -rm -f conftest.err conftest.i conftest.$ac_ext
> -
> -  # OK, works on sane cases.  Now check whether nonexistent headers
> -  # can be detected and how.
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -#include <ac_nonexistent.h>
> -_ACEOF
> -if ac_fn_c_try_cpp "$LINENO"; then :
> -  # Broken: success on invalid input.
> -continue
> -else
> -  # Passes both tests.
> -ac_preproc_ok=:
> -break
> -fi
> -rm -f conftest.err conftest.i conftest.$ac_ext
> -
> -done
> -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
> -rm -f conftest.i conftest.err conftest.$ac_ext
> -if $ac_preproc_ok; then :
> -  break
> -fi
> -
> -    done
> -    ac_cv_prog_CPP=$CPP
> -
> -fi
> -  CPP=$ac_cv_prog_CPP
> -else
> -  ac_cv_prog_CPP=$CPP
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
> -$as_echo "$CPP" >&6; }
> -ac_preproc_ok=false
> -for ac_c_preproc_warn_flag in '' yes
> -do
> -  # Use a header file that comes with gcc, so configuring glibc
> -  # with a fresh cross-compiler works.
> -  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
> -  # <limits.h> exists even on freestanding compilers.
> -  # On the NeXT, cc -E runs the code through the compiler's parser,
> -  # not just through cpp. "Syntax error" is here to catch this case.
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -#ifdef __STDC__
> -# include <limits.h>
> -#else
> -# include <assert.h>
> -#endif
> -		     Syntax error
> -_ACEOF
> -if ac_fn_c_try_cpp "$LINENO"; then :
> -
> -else
> -  # Broken: fails on valid input.
> -continue
> -fi
> -rm -f conftest.err conftest.i conftest.$ac_ext
> -
> -  # OK, works on sane cases.  Now check whether nonexistent headers
> -  # can be detected and how.
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -#include <ac_nonexistent.h>
> -_ACEOF
> -if ac_fn_c_try_cpp "$LINENO"; then :
> -  # Broken: success on invalid input.
> -continue
> -else
> -  # Passes both tests.
> -ac_preproc_ok=:
> -break
> -fi
> -rm -f conftest.err conftest.i conftest.$ac_ext
> -
> -done
> -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
> -rm -f conftest.i conftest.err conftest.$ac_ext
> -if $ac_preproc_ok; then :
> -
> -else
> -  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
> -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
> -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
> -See \`config.log' for more details" "$LINENO" 5; }
> -fi
> -
> -ac_ext=c
> -ac_cpp='$CPP $CPPFLAGS'
> -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
> -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
> -ac_compiler_gnu=$ac_cv_c_compiler_gnu
> -
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
> -$as_echo_n "checking for ANSI C header files... " >&6; }
> -if ${ac_cv_header_stdc+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -#include <stdlib.h>
> -#include <stdarg.h>
> -#include <string.h>
> -#include <float.h>
> -
> -int
> -main ()
> -{
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_compile "$LINENO"; then :
> -  ac_cv_header_stdc=yes
> -else
> -  ac_cv_header_stdc=no
> -fi
> -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
> -
> -if test $ac_cv_header_stdc = yes; then
> -  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -#include <string.h>
> -
> -_ACEOF
> -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
> -  $EGREP "memchr" >/dev/null 2>&1; then :
> -
> -else
> -  ac_cv_header_stdc=no
> -fi
> -rm -f conftest*
> -
> -fi
> -
> -if test $ac_cv_header_stdc = yes; then
> -  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -#include <stdlib.h>
> -
> -_ACEOF
> -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
> -  $EGREP "free" >/dev/null 2>&1; then :
> -
> -else
> -  ac_cv_header_stdc=no
> -fi
> -rm -f conftest*
> -
> -fi
> -
> -if test $ac_cv_header_stdc = yes; then
> -  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
> -  if test "$cross_compiling" = yes; then :
> -  :
> -else
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -#include <ctype.h>
> -#include <stdlib.h>
> -#if ((' ' & 0x0FF) == 0x020)
> -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
> -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
> -#else
> -# define ISLOWER(c) \
> -		   (('a' <= (c) && (c) <= 'i') \
> -		     || ('j' <= (c) && (c) <= 'r') \
> -		     || ('s' <= (c) && (c) <= 'z'))
> -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
> -#endif
> -
> -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
> -int
> -main ()
> -{
> -  int i;
> -  for (i = 0; i < 256; i++)
> -    if (XOR (islower (i), ISLOWER (i))
> -	|| toupper (i) != TOUPPER (i))
> -      return 2;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_run "$LINENO"; then :
> -
> -else
> -  ac_cv_header_stdc=no
> -fi
> -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
> -  conftest.$ac_objext conftest.beam conftest.$ac_ext
> -fi
> -
> -fi
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
> -$as_echo "$ac_cv_header_stdc" >&6; }
> -if test $ac_cv_header_stdc = yes; then
> -
> -$as_echo "#define STDC_HEADERS 1" >>confdefs.h
> -
> -fi
> -
> -# On IRIX 5.3, sys/types and inttypes.h are conflicting.
> -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
> -		  inttypes.h stdint.h unistd.h
> -do :
> -  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
> -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
> -"
> -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
> -  cat >>confdefs.h <<_ACEOF
> -#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
> -_ACEOF
> -
> -fi
> -
> -done
> -
> -
> -for ac_header in dlfcn.h
> -do :
> -  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
> -"
> -if test "x$ac_cv_header_dlfcn_h" = xyes; then :
> -  cat >>confdefs.h <<_ACEOF
> -#define HAVE_DLFCN_H 1
> -_ACEOF
> -
> -fi
> -
> -done
> -
> -
> -
> -
> -
> -# Set options
> -
> -
> -
> -        enable_dlopen=no
> -
> -
> -  enable_win32_dll=no
> -
> -
> -            # Check whether --enable-shared was given.
> -if test "${enable_shared+set}" = set; then :
> -  enableval=$enable_shared; p=${PACKAGE-default}
> -    case $enableval in
> -    yes) enable_shared=yes ;;
> -    no) enable_shared=no ;;
> -    *)
> -      enable_shared=no
> -      # Look at the argument we got.  We use all the common list separators.
> -      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
> -      for pkg in $enableval; do
> -	IFS="$lt_save_ifs"
> -	if test "X$pkg" = "X$p"; then
> -	  enable_shared=yes
> -	fi
> -      done
> -      IFS="$lt_save_ifs"
> -      ;;
> -    esac
> -else
> -  enable_shared=yes
> -fi
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -  # Check whether --enable-static was given.
> -if test "${enable_static+set}" = set; then :
> -  enableval=$enable_static; p=${PACKAGE-default}
> -    case $enableval in
> -    yes) enable_static=yes ;;
> -    no) enable_static=no ;;
> -    *)
> -     enable_static=no
> -      # Look at the argument we got.  We use all the common list separators.
> -      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
> -      for pkg in $enableval; do
> -	IFS="$lt_save_ifs"
> -	if test "X$pkg" = "X$p"; then
> -	  enable_static=yes
> -	fi
> -      done
> -      IFS="$lt_save_ifs"
> -      ;;
> -    esac
> -else
> -  enable_static=yes
> -fi
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -# Check whether --with-pic was given.
> -if test "${with_pic+set}" = set; then :
> -  withval=$with_pic; pic_mode="$withval"
> -else
> -  pic_mode=default
> -fi
> -
> -
> -test -z "$pic_mode" && pic_mode=default
> -
> -
> -
> -
> -
> -
> -
> -  # Check whether --enable-fast-install was given.
> -if test "${enable_fast_install+set}" = set; then :
> -  enableval=$enable_fast_install; p=${PACKAGE-default}
> -    case $enableval in
> -    yes) enable_fast_install=yes ;;
> -    no) enable_fast_install=no ;;
> -    *)
> -      enable_fast_install=no
> -      # Look at the argument we got.  We use all the common list separators.
> -      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
> -      for pkg in $enableval; do
> -	IFS="$lt_save_ifs"
> -	if test "X$pkg" = "X$p"; then
> -	  enable_fast_install=yes
> -	fi
> -      done
> -      IFS="$lt_save_ifs"
> -      ;;
> -    esac
> -else
> -  enable_fast_install=yes
> -fi
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -# This can be used to rebuild libtool when needed
> -LIBTOOL_DEPS="$ltmain"
> -
> -# Always use our own libtool.
> -LIBTOOL='$(SHELL) $(top_builddir)/libtool'
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -test -z "$LN_S" && LN_S="ln -s"
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -if test -n "${ZSH_VERSION+set}" ; then
> -   setopt NO_GLOB_SUBST
> -fi
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
> -$as_echo_n "checking for objdir... " >&6; }
> -if ${lt_cv_objdir+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  rm -f .libs 2>/dev/null
> -mkdir .libs 2>/dev/null
> -if test -d .libs; then
> -  lt_cv_objdir=.libs
> -else
> -  # MS-DOS does not allow filenames that begin with a dot.
> -  lt_cv_objdir=_libs
> -fi
> -rmdir .libs 2>/dev/null
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
> -$as_echo "$lt_cv_objdir" >&6; }
> -objdir=$lt_cv_objdir
> -
> -
> -
> -
> -
> -cat >>confdefs.h <<_ACEOF
> -#define LT_OBJDIR "$lt_cv_objdir/"
> -_ACEOF
> -
> -
> -
> -
> -case $host_os in
> -aix3*)
> -  # AIX sometimes has problems with the GCC collect2 program.  For some
> -  # reason, if we set the COLLECT_NAMES environment variable, the problems
> -  # vanish in a puff of smoke.
> -  if test "X${COLLECT_NAMES+set}" != Xset; then
> -    COLLECT_NAMES=
> -    export COLLECT_NAMES
> -  fi
> -  ;;
> -esac
> -
> -# Global variables:
> -ofile=libtool
> -can_build_shared=yes
> -
> -# All known linkers require a `.a' archive for static linking (except MSVC,
> -# which needs '.lib').
> -libext=a
> -
> -with_gnu_ld="$lt_cv_prog_gnu_ld"
> -
> -old_CC="$CC"
> -old_CFLAGS="$CFLAGS"
> -
> -# Set sane defaults for various variables
> -test -z "$CC" && CC=cc
> -test -z "$LTCC" && LTCC=$CC
> -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
> -test -z "$LD" && LD=ld
> -test -z "$ac_objext" && ac_objext=o
> -
> -for cc_temp in $compiler""; do
> -  case $cc_temp in
> -    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
> -    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
> -    \-*) ;;
> -    *) break;;
> -  esac
> -done
> -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
> -
> -
> -# Only perform the check for file, if the check method requires it
> -test -z "$MAGIC_CMD" && MAGIC_CMD=file
> -case $deplibs_check_method in
> -file_magic*)
> -  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
> -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
> -if ${lt_cv_path_MAGIC_CMD+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  case $MAGIC_CMD in
> -[\\/*] |  ?:[\\/]*)
> -  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
> -  ;;
> -*)
> -  lt_save_MAGIC_CMD="$MAGIC_CMD"
> -  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
> -  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
> -  for ac_dir in $ac_dummy; do
> -    IFS="$lt_save_ifs"
> -    test -z "$ac_dir" && ac_dir=.
> -    if test -f $ac_dir/${ac_tool_prefix}file; then
> -      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
> -      if test -n "$file_magic_test_file"; then
> -	case $deplibs_check_method in
> -	"file_magic "*)
> -	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
> -	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
> -	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
> -	    $EGREP "$file_magic_regex" > /dev/null; then
> -	    :
> -	  else
> -	    cat <<_LT_EOF 1>&2
> -
> -*** Warning: the command libtool uses to detect shared libraries,
> -*** $file_magic_cmd, produces output that libtool cannot recognize.
> -*** The result is that libtool may fail to recognize shared libraries
> -*** as such.  This will affect the creation of libtool libraries that
> -*** depend on shared libraries, but programs linked with such libtool
> -*** libraries will work regardless of this problem.  Nevertheless, you
> -*** may want to report the problem to your system manager and/or to
> -*** bug-libtool@gnu.org
> -
> -_LT_EOF
> -	  fi ;;
> -	esac
> -      fi
> -      break
> -    fi
> -  done
> -  IFS="$lt_save_ifs"
> -  MAGIC_CMD="$lt_save_MAGIC_CMD"
> -  ;;
> -esac
> -fi
> -
> -MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
> -if test -n "$MAGIC_CMD"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
> -$as_echo "$MAGIC_CMD" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -
> -
> -
> -if test -z "$lt_cv_path_MAGIC_CMD"; then
> -  if test -n "$ac_tool_prefix"; then
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
> -$as_echo_n "checking for file... " >&6; }
> -if ${lt_cv_path_MAGIC_CMD+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  case $MAGIC_CMD in
> -[\\/*] |  ?:[\\/]*)
> -  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
> -  ;;
> -*)
> -  lt_save_MAGIC_CMD="$MAGIC_CMD"
> -  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
> -  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
> -  for ac_dir in $ac_dummy; do
> -    IFS="$lt_save_ifs"
> -    test -z "$ac_dir" && ac_dir=.
> -    if test -f $ac_dir/file; then
> -      lt_cv_path_MAGIC_CMD="$ac_dir/file"
> -      if test -n "$file_magic_test_file"; then
> -	case $deplibs_check_method in
> -	"file_magic "*)
> -	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
> -	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
> -	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
> -	    $EGREP "$file_magic_regex" > /dev/null; then
> -	    :
> -	  else
> -	    cat <<_LT_EOF 1>&2
> -
> -*** Warning: the command libtool uses to detect shared libraries,
> -*** $file_magic_cmd, produces output that libtool cannot recognize.
> -*** The result is that libtool may fail to recognize shared libraries
> -*** as such.  This will affect the creation of libtool libraries that
> -*** depend on shared libraries, but programs linked with such libtool
> -*** libraries will work regardless of this problem.  Nevertheless, you
> -*** may want to report the problem to your system manager and/or to
> -*** bug-libtool@gnu.org
> -
> -_LT_EOF
> -	  fi ;;
> -	esac
> -      fi
> -      break
> -    fi
> -  done
> -  IFS="$lt_save_ifs"
> -  MAGIC_CMD="$lt_save_MAGIC_CMD"
> -  ;;
> -esac
> -fi
> -
> -MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
> -if test -n "$MAGIC_CMD"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
> -$as_echo "$MAGIC_CMD" >&6; }
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
> -$as_echo "no" >&6; }
> -fi
> -
> -
> -  else
> -    MAGIC_CMD=:
> -  fi
> -fi
> -
> -  fi
> -  ;;
> -esac
> -
> -# Use C for the default configuration in the libtool script
> -
> -lt_save_CC="$CC"
> -ac_ext=c
> -ac_cpp='$CPP $CPPFLAGS'
> -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
> -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
> -ac_compiler_gnu=$ac_cv_c_compiler_gnu
> -
> -
> -# Source file extension for C test sources.
> -ac_ext=c
> -
> -# Object file extension for compiled C test sources.
> -objext=o
> -objext=$objext
> -
> -# Code to be used in simple compile tests
> -lt_simple_compile_test_code="int some_variable = 0;"
> -
> -# Code to be used in simple link tests
> -lt_simple_link_test_code='int main(){return(0);}'
> -
> -
> -
> -
> -
> -
> -
> -# If no C compiler was specified, use CC.
> -LTCC=${LTCC-"$CC"}
> -
> -# If no C compiler flags were specified, use CFLAGS.
> -LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
> -
> -# Allow CC to be a program name with arguments.
> -compiler=$CC
> -
> -# Save the default compiler, since it gets overwritten when the other
> -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
> -compiler_DEFAULT=$CC
> -
> -# save warnings/boilerplate of simple test code
> -ac_outfile=conftest.$ac_objext
> -echo "$lt_simple_compile_test_code" >conftest.$ac_ext
> -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
> -_lt_compiler_boilerplate=`cat conftest.err`
> -$RM conftest*
> -
> -ac_outfile=conftest.$ac_objext
> -echo "$lt_simple_link_test_code" >conftest.$ac_ext
> -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
> -_lt_linker_boilerplate=`cat conftest.err`
> -$RM -r conftest*
> -
> -
> -## CAVEAT EMPTOR:
> -## There is no encapsulation within the following macros, do not change
> -## the running order or otherwise move them around unless you know exactly
> -## what you are doing...
> -if test -n "$compiler"; then
> -
> -lt_prog_compiler_no_builtin_flag=
> -
> -if test "$GCC" = yes; then
> -  case $cc_basename in
> -  nvcc*)
> -    lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
> -  *)
> -    lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
> -  esac
> -
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
> -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
> -if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_prog_compiler_rtti_exceptions=no
> -   ac_outfile=conftest.$ac_objext
> -   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
> -   lt_compiler_flag="-fno-rtti -fno-exceptions"
> -   # Insert the option either (1) after the last *FLAGS variable, or
> -   # (2) before a word containing "conftest.", or (3) at the end.
> -   # Note that $ac_compile itself does not contain backslashes and begins
> -   # with a dollar sign (not a hyphen), so the echo should work correctly.
> -   # The option is referenced via a variable to avoid confusing sed.
> -   lt_compile=`echo "$ac_compile" | $SED \
> -   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
> -   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
> -   -e 's:$: $lt_compiler_flag:'`
> -   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
> -   (eval "$lt_compile" 2>conftest.err)
> -   ac_status=$?
> -   cat conftest.err >&5
> -   echo "$as_me:$LINENO: \$? = $ac_status" >&5
> -   if (exit $ac_status) && test -s "$ac_outfile"; then
> -     # The compiler can only warn and ignore the option if not recognized
> -     # So say no if there are warnings other than the usual output.
> -     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
> -     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
> -     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
> -       lt_cv_prog_compiler_rtti_exceptions=yes
> -     fi
> -   fi
> -   $RM conftest*
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
> -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
> -
> -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
> -    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
> -else
> -    :
> -fi
> -
> -fi
> -
> -
> -
> -
> -
> -
> -  lt_prog_compiler_wl=
> -lt_prog_compiler_pic=
> -lt_prog_compiler_static=
> -
> -
> -  if test "$GCC" = yes; then
> -    lt_prog_compiler_wl='-Wl,'
> -    lt_prog_compiler_static='-static'
> -
> -    case $host_os in
> -      aix*)
> -      # All AIX code is PIC.
> -      if test "$host_cpu" = ia64; then
> -	# AIX 5 now supports IA64 processor
> -	lt_prog_compiler_static='-Bstatic'
> -      fi
> -      ;;
> -
> -    amigaos*)
> -      case $host_cpu in
> -      powerpc)
> -            # see comment about AmigaOS4 .so support
> -            lt_prog_compiler_pic='-fPIC'
> -        ;;
> -      m68k)
> -            # FIXME: we need at least 68020 code to build shared libraries, but
> -            # adding the `-m68020' flag to GCC prevents building anything better,
> -            # like `-m68040'.
> -            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
> -        ;;
> -      esac
> -      ;;
> -
> -    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
> -      # PIC is the default for these OSes.
> -      ;;
> -
> -    mingw* | cygwin* | pw32* | os2* | cegcc*)
> -      # This hack is so that the source file can tell whether it is being
> -      # built for inclusion in a dll (and should export symbols for example).
> -      # Although the cygwin gcc ignores -fPIC, still need this for old-style
> -      # (--disable-auto-import) libraries
> -      lt_prog_compiler_pic='-DDLL_EXPORT'
> -      ;;
> -
> -    darwin* | rhapsody*)
> -      # PIC is the default on this platform
> -      # Common symbols not allowed in MH_DYLIB files
> -      lt_prog_compiler_pic='-fno-common'
> -      ;;
> -
> -    haiku*)
> -      # PIC is the default for Haiku.
> -      # The "-static" flag exists, but is broken.
> -      lt_prog_compiler_static=
> -      ;;
> -
> -    hpux*)
> -      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
> -      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
> -      # sets the default TLS model and affects inlining.
> -      case $host_cpu in
> -      hppa*64*)
> -	# +Z the default
> -	;;
> -      *)
> -	lt_prog_compiler_pic='-fPIC'
> -	;;
> -      esac
> -      ;;
> -
> -    interix[3-9]*)
> -      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
> -      # Instead, we relocate shared libraries at runtime.
> -      ;;
> -
> -    msdosdjgpp*)
> -      # Just because we use GCC doesn't mean we suddenly get shared libraries
> -      # on systems that don't support them.
> -      lt_prog_compiler_can_build_shared=no
> -      enable_shared=no
> -      ;;
> -
> -    *nto* | *qnx*)
> -      # QNX uses GNU C++, but need to define -shared option too, otherwise
> -      # it will coredump.
> -      lt_prog_compiler_pic='-fPIC -shared'
> -      ;;
> -
> -    sysv4*MP*)
> -      if test -d /usr/nec; then
> -	lt_prog_compiler_pic=-Kconform_pic
> -      fi
> -      ;;
> -
> -    *)
> -      lt_prog_compiler_pic='-fPIC'
> -      ;;
> -    esac
> -
> -    case $cc_basename in
> -    nvcc*) # Cuda Compiler Driver 2.2
> -      lt_prog_compiler_wl='-Xlinker '
> -      lt_prog_compiler_pic='-Xcompiler -fPIC'
> -      ;;
> -    esac
> -  else
> -    # PORTME Check for flag to pass linker flags through the system compiler.
> -    case $host_os in
> -    aix*)
> -      lt_prog_compiler_wl='-Wl,'
> -      if test "$host_cpu" = ia64; then
> -	# AIX 5 now supports IA64 processor
> -	lt_prog_compiler_static='-Bstatic'
> -      else
> -	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
> -      fi
> -      ;;
> -
> -    mingw* | cygwin* | pw32* | os2* | cegcc*)
> -      # This hack is so that the source file can tell whether it is being
> -      # built for inclusion in a dll (and should export symbols for example).
> -      lt_prog_compiler_pic='-DDLL_EXPORT'
> -      ;;
> -
> -    hpux9* | hpux10* | hpux11*)
> -      lt_prog_compiler_wl='-Wl,'
> -      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
> -      # not for PA HP-UX.
> -      case $host_cpu in
> -      hppa*64*|ia64*)
> -	# +Z the default
> -	;;
> -      *)
> -	lt_prog_compiler_pic='+Z'
> -	;;
> -      esac
> -      # Is there a better lt_prog_compiler_static that works with the bundled CC?
> -      lt_prog_compiler_static='${wl}-a ${wl}archive'
> -      ;;
> -
> -    irix5* | irix6* | nonstopux*)
> -      lt_prog_compiler_wl='-Wl,'
> -      # PIC (with -KPIC) is the default.
> -      lt_prog_compiler_static='-non_shared'
> -      ;;
> -
> -    linux* | k*bsd*-gnu | kopensolaris*-gnu)
> -      case $cc_basename in
> -      # old Intel for x86_64 which still supported -KPIC.
> -      ecc*)
> -	lt_prog_compiler_wl='-Wl,'
> -	lt_prog_compiler_pic='-KPIC'
> -	lt_prog_compiler_static='-static'
> -        ;;
> -      # icc used to be incompatible with GCC.
> -      # ICC 10 doesn't accept -KPIC any more.
> -      icc* | ifort*)
> -	lt_prog_compiler_wl='-Wl,'
> -	lt_prog_compiler_pic='-fPIC'
> -	lt_prog_compiler_static='-static'
> -        ;;
> -      # Lahey Fortran 8.1.
> -      lf95*)
> -	lt_prog_compiler_wl='-Wl,'
> -	lt_prog_compiler_pic='--shared'
> -	lt_prog_compiler_static='--static'
> -	;;
> -      nagfor*)
> -	# NAG Fortran compiler
> -	lt_prog_compiler_wl='-Wl,-Wl,,'
> -	lt_prog_compiler_pic='-PIC'
> -	lt_prog_compiler_static='-Bstatic'
> -	;;
> -      pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
> -        # Portland Group compilers (*not* the Pentium gcc compiler,
> -	# which looks to be a dead project)
> -	lt_prog_compiler_wl='-Wl,'
> -	lt_prog_compiler_pic='-fpic'
> -	lt_prog_compiler_static='-Bstatic'
> -        ;;
> -      ccc*)
> -        lt_prog_compiler_wl='-Wl,'
> -        # All Alpha code is PIC.
> -        lt_prog_compiler_static='-non_shared'
> -        ;;
> -      xl* | bgxl* | bgf* | mpixl*)
> -	# IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
> -	lt_prog_compiler_wl='-Wl,'
> -	lt_prog_compiler_pic='-qpic'
> -	lt_prog_compiler_static='-qstaticlink'
> -	;;
> -      *)
> -	case `$CC -V 2>&1 | sed 5q` in
> -	*Sun\ F* | *Sun*Fortran*)
> -	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
> -	  lt_prog_compiler_pic='-KPIC'
> -	  lt_prog_compiler_static='-Bstatic'
> -	  lt_prog_compiler_wl=''
> -	  ;;
> -	*Sun\ C*)
> -	  # Sun C 5.9
> -	  lt_prog_compiler_pic='-KPIC'
> -	  lt_prog_compiler_static='-Bstatic'
> -	  lt_prog_compiler_wl='-Wl,'
> -	  ;;
> -	esac
> -	;;
> -      esac
> -      ;;
> -
> -    newsos6)
> -      lt_prog_compiler_pic='-KPIC'
> -      lt_prog_compiler_static='-Bstatic'
> -      ;;
> -
> -    *nto* | *qnx*)
> -      # QNX uses GNU C++, but need to define -shared option too, otherwise
> -      # it will coredump.
> -      lt_prog_compiler_pic='-fPIC -shared'
> -      ;;
> -
> -    osf3* | osf4* | osf5*)
> -      lt_prog_compiler_wl='-Wl,'
> -      # All OSF/1 code is PIC.
> -      lt_prog_compiler_static='-non_shared'
> -      ;;
> -
> -    rdos*)
> -      lt_prog_compiler_static='-non_shared'
> -      ;;
> -
> -    solaris*)
> -      lt_prog_compiler_pic='-KPIC'
> -      lt_prog_compiler_static='-Bstatic'
> -      case $cc_basename in
> -      f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
> -	lt_prog_compiler_wl='-Qoption ld ';;
> -      *)
> -	lt_prog_compiler_wl='-Wl,';;
> -      esac
> -      ;;
> -
> -    sunos4*)
> -      lt_prog_compiler_wl='-Qoption ld '
> -      lt_prog_compiler_pic='-PIC'
> -      lt_prog_compiler_static='-Bstatic'
> -      ;;
> -
> -    sysv4 | sysv4.2uw2* | sysv4.3*)
> -      lt_prog_compiler_wl='-Wl,'
> -      lt_prog_compiler_pic='-KPIC'
> -      lt_prog_compiler_static='-Bstatic'
> -      ;;
> -
> -    sysv4*MP*)
> -      if test -d /usr/nec ;then
> -	lt_prog_compiler_pic='-Kconform_pic'
> -	lt_prog_compiler_static='-Bstatic'
> -      fi
> -      ;;
> -
> -    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
> -      lt_prog_compiler_wl='-Wl,'
> -      lt_prog_compiler_pic='-KPIC'
> -      lt_prog_compiler_static='-Bstatic'
> -      ;;
> -
> -    unicos*)
> -      lt_prog_compiler_wl='-Wl,'
> -      lt_prog_compiler_can_build_shared=no
> -      ;;
> -
> -    uts4*)
> -      lt_prog_compiler_pic='-pic'
> -      lt_prog_compiler_static='-Bstatic'
> -      ;;
> -
> -    *)
> -      lt_prog_compiler_can_build_shared=no
> -      ;;
> -    esac
> -  fi
> -
> -case $host_os in
> -  # For platforms which do not support PIC, -DPIC is meaningless:
> -  *djgpp*)
> -    lt_prog_compiler_pic=
> -    ;;
> -  *)
> -    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
> -    ;;
> -esac
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
> -$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
> -if ${lt_cv_prog_compiler_pic+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
> -$as_echo "$lt_cv_prog_compiler_pic" >&6; }
> -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
> -
> -#
> -# Check to make sure the PIC flag actually works.
> -#
> -if test -n "$lt_prog_compiler_pic"; then
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
> -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
> -if ${lt_cv_prog_compiler_pic_works+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_prog_compiler_pic_works=no
> -   ac_outfile=conftest.$ac_objext
> -   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
> -   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
> -   # Insert the option either (1) after the last *FLAGS variable, or
> -   # (2) before a word containing "conftest.", or (3) at the end.
> -   # Note that $ac_compile itself does not contain backslashes and begins
> -   # with a dollar sign (not a hyphen), so the echo should work correctly.
> -   # The option is referenced via a variable to avoid confusing sed.
> -   lt_compile=`echo "$ac_compile" | $SED \
> -   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
> -   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
> -   -e 's:$: $lt_compiler_flag:'`
> -   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
> -   (eval "$lt_compile" 2>conftest.err)
> -   ac_status=$?
> -   cat conftest.err >&5
> -   echo "$as_me:$LINENO: \$? = $ac_status" >&5
> -   if (exit $ac_status) && test -s "$ac_outfile"; then
> -     # The compiler can only warn and ignore the option if not recognized
> -     # So say no if there are warnings other than the usual output.
> -     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
> -     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
> -     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
> -       lt_cv_prog_compiler_pic_works=yes
> -     fi
> -   fi
> -   $RM conftest*
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
> -$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
> -
> -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
> -    case $lt_prog_compiler_pic in
> -     "" | " "*) ;;
> -     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
> -     esac
> -else
> -    lt_prog_compiler_pic=
> -     lt_prog_compiler_can_build_shared=no
> -fi
> -
> -fi
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -#
> -# Check to make sure the static flag actually works.
> -#
> -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
> -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
> -if ${lt_cv_prog_compiler_static_works+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_prog_compiler_static_works=no
> -   save_LDFLAGS="$LDFLAGS"
> -   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
> -   echo "$lt_simple_link_test_code" > conftest.$ac_ext
> -   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
> -     # The linker can only warn and ignore the option if not recognized
> -     # So say no if there are warnings
> -     if test -s conftest.err; then
> -       # Append any errors to the config.log.
> -       cat conftest.err 1>&5
> -       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
> -       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
> -       if diff conftest.exp conftest.er2 >/dev/null; then
> -         lt_cv_prog_compiler_static_works=yes
> -       fi
> -     else
> -       lt_cv_prog_compiler_static_works=yes
> -     fi
> -   fi
> -   $RM -r conftest*
> -   LDFLAGS="$save_LDFLAGS"
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
> -$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
> -
> -if test x"$lt_cv_prog_compiler_static_works" = xyes; then
> -    :
> -else
> -    lt_prog_compiler_static=
> -fi
> -
> -
> -
> -
> -
> -
> -
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
> -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
> -if ${lt_cv_prog_compiler_c_o+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_prog_compiler_c_o=no
> -   $RM -r conftest 2>/dev/null
> -   mkdir conftest
> -   cd conftest
> -   mkdir out
> -   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
> -
> -   lt_compiler_flag="-o out/conftest2.$ac_objext"
> -   # Insert the option either (1) after the last *FLAGS variable, or
> -   # (2) before a word containing "conftest.", or (3) at the end.
> -   # Note that $ac_compile itself does not contain backslashes and begins
> -   # with a dollar sign (not a hyphen), so the echo should work correctly.
> -   lt_compile=`echo "$ac_compile" | $SED \
> -   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
> -   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
> -   -e 's:$: $lt_compiler_flag:'`
> -   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
> -   (eval "$lt_compile" 2>out/conftest.err)
> -   ac_status=$?
> -   cat out/conftest.err >&5
> -   echo "$as_me:$LINENO: \$? = $ac_status" >&5
> -   if (exit $ac_status) && test -s out/conftest2.$ac_objext
> -   then
> -     # The compiler can only warn and ignore the option if not recognized
> -     # So say no if there are warnings
> -     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
> -     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
> -     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
> -       lt_cv_prog_compiler_c_o=yes
> -     fi
> -   fi
> -   chmod u+w . 2>&5
> -   $RM conftest*
> -   # SGI C++ compiler will create directory out/ii_files/ for
> -   # template instantiation
> -   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
> -   $RM out/* && rmdir out
> -   cd ..
> -   $RM -r conftest
> -   $RM conftest*
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
> -$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
> -
> -
> -
> -
> -
> -
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
> -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
> -if ${lt_cv_prog_compiler_c_o+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_prog_compiler_c_o=no
> -   $RM -r conftest 2>/dev/null
> -   mkdir conftest
> -   cd conftest
> -   mkdir out
> -   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
> -
> -   lt_compiler_flag="-o out/conftest2.$ac_objext"
> -   # Insert the option either (1) after the last *FLAGS variable, or
> -   # (2) before a word containing "conftest.", or (3) at the end.
> -   # Note that $ac_compile itself does not contain backslashes and begins
> -   # with a dollar sign (not a hyphen), so the echo should work correctly.
> -   lt_compile=`echo "$ac_compile" | $SED \
> -   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
> -   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
> -   -e 's:$: $lt_compiler_flag:'`
> -   (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
> -   (eval "$lt_compile" 2>out/conftest.err)
> -   ac_status=$?
> -   cat out/conftest.err >&5
> -   echo "$as_me:$LINENO: \$? = $ac_status" >&5
> -   if (exit $ac_status) && test -s out/conftest2.$ac_objext
> -   then
> -     # The compiler can only warn and ignore the option if not recognized
> -     # So say no if there are warnings
> -     $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
> -     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
> -     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
> -       lt_cv_prog_compiler_c_o=yes
> -     fi
> -   fi
> -   chmod u+w . 2>&5
> -   $RM conftest*
> -   # SGI C++ compiler will create directory out/ii_files/ for
> -   # template instantiation
> -   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
> -   $RM out/* && rmdir out
> -   cd ..
> -   $RM -r conftest
> -   $RM conftest*
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
> -$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
> -
> -
> -
> -
> -hard_links="nottested"
> -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
> -  # do not overwrite the value of need_locks provided by the user
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
> -$as_echo_n "checking if we can lock with hard links... " >&6; }
> -  hard_links=yes
> -  $RM conftest*
> -  ln conftest.a conftest.b 2>/dev/null && hard_links=no
> -  touch conftest.a
> -  ln conftest.a conftest.b 2>&5 || hard_links=no
> -  ln conftest.a conftest.b 2>/dev/null && hard_links=no
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
> -$as_echo "$hard_links" >&6; }
> -  if test "$hard_links" = no; then
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
> -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
> -    need_locks=warn
> -  fi
> -else
> -  need_locks=no
> -fi
> -
> -
> -
> -
> -
> -
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
> -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
> -
> -  runpath_var=
> -  allow_undefined_flag=
> -  always_export_symbols=no
> -  archive_cmds=
> -  archive_expsym_cmds=
> -  compiler_needs_object=no
> -  enable_shared_with_static_runtimes=no
> -  export_dynamic_flag_spec=
> -  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
> -  hardcode_automatic=no
> -  hardcode_direct=no
> -  hardcode_direct_absolute=no
> -  hardcode_libdir_flag_spec=
> -  hardcode_libdir_flag_spec_ld=
> -  hardcode_libdir_separator=
> -  hardcode_minus_L=no
> -  hardcode_shlibpath_var=unsupported
> -  inherit_rpath=no
> -  link_all_deplibs=unknown
> -  module_cmds=
> -  module_expsym_cmds=
> -  old_archive_from_new_cmds=
> -  old_archive_from_expsyms_cmds=
> -  thread_safe_flag_spec=
> -  whole_archive_flag_spec=
> -  # include_expsyms should be a list of space-separated symbols to be *always*
> -  # included in the symbol list
> -  include_expsyms=
> -  # exclude_expsyms can be an extended regexp of symbols to exclude
> -  # it will be wrapped by ` (' and `)$', so one must not match beginning or
> -  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
> -  # as well as any symbol that contains `d'.
> -  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
> -  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
> -  # platforms (ab)use it in PIC code, but their linkers get confused if
> -  # the symbol is explicitly referenced.  Since portable code cannot
> -  # rely on this symbol name, it's probably fine to never include it in
> -  # preloaded symbol tables.
> -  # Exclude shared library initialization/finalization symbols.
> -  extract_expsyms_cmds=
> -
> -  case $host_os in
> -  cygwin* | mingw* | pw32* | cegcc*)
> -    # FIXME: the MSVC++ port hasn't been tested in a loooong time
> -    # When not using gcc, we currently assume that we are using
> -    # Microsoft Visual C++.
> -    if test "$GCC" != yes; then
> -      with_gnu_ld=no
> -    fi
> -    ;;
> -  interix*)
> -    # we just hope/assume this is gcc and not c89 (= MSVC++)
> -    with_gnu_ld=yes
> -    ;;
> -  openbsd*)
> -    with_gnu_ld=no
> -    ;;
> -  linux* | k*bsd*-gnu | gnu*)
> -    link_all_deplibs=no
> -    ;;
> -  esac
> -
> -  ld_shlibs=yes
> -
> -  # On some targets, GNU ld is compatible enough with the native linker
> -  # that we're better off using the native interface for both.
> -  lt_use_gnu_ld_interface=no
> -  if test "$with_gnu_ld" = yes; then
> -    case $host_os in
> -      aix*)
> -	# The AIX port of GNU ld has always aspired to compatibility
> -	# with the native linker.  However, as the warning in the GNU ld
> -	# block says, versions before 2.19.5* couldn't really create working
> -	# shared libraries, regardless of the interface used.
> -	case `$LD -v 2>&1` in
> -	  *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
> -	  *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
> -	  *\ \(GNU\ Binutils\)\ [3-9]*) ;;
> -	  *)
> -	    lt_use_gnu_ld_interface=yes
> -	    ;;
> -	esac
> -	;;
> -      *)
> -	lt_use_gnu_ld_interface=yes
> -	;;
> -    esac
> -  fi
> -
> -  if test "$lt_use_gnu_ld_interface" = yes; then
> -    # If archive_cmds runs LD, not CC, wlarc should be empty
> -    wlarc='${wl}'
> -
> -    # Set some defaults for GNU ld with shared library support. These
> -    # are reset later if shared libraries are not supported. Putting them
> -    # here allows them to be overridden if necessary.
> -    runpath_var=LD_RUN_PATH
> -    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
> -    export_dynamic_flag_spec='${wl}--export-dynamic'
> -    # ancient GNU ld didn't support --whole-archive et. al.
> -    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
> -      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
> -    else
> -      whole_archive_flag_spec=
> -    fi
> -    supports_anon_versioning=no
> -    case `$LD -v 2>&1` in
> -      *GNU\ gold*) supports_anon_versioning=yes ;;
> -      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
> -      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
> -      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
> -      *\ 2.11.*) ;; # other 2.11 versions
> -      *) supports_anon_versioning=yes ;;
> -    esac
> -
> -    # See if GNU ld supports shared libraries.
> -    case $host_os in
> -    aix[3-9]*)
> -      # On AIX/PPC, the GNU linker is very broken
> -      if test "$host_cpu" != ia64; then
> -	ld_shlibs=no
> -	cat <<_LT_EOF 1>&2
> -
> -*** Warning: the GNU linker, at least up to release 2.19, is reported
> -*** to be unable to reliably create shared libraries on AIX.
> -*** Therefore, libtool is disabling shared libraries support.  If you
> -*** really care for shared libraries, you may want to install binutils
> -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
> -*** You will then need to restart the configuration process.
> -
> -_LT_EOF
> -      fi
> -      ;;
> -
> -    amigaos*)
> -      case $host_cpu in
> -      powerpc)
> -            # see comment about AmigaOS4 .so support
> -            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
> -            archive_expsym_cmds=''
> -        ;;
> -      m68k)
> -            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
> -            hardcode_libdir_flag_spec='-L$libdir'
> -            hardcode_minus_L=yes
> -        ;;
> -      esac
> -      ;;
> -
> -    beos*)
> -      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
> -	allow_undefined_flag=unsupported
> -	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
> -	# support --undefined.  This deserves some investigation.  FIXME
> -	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
> -      else
> -	ld_shlibs=no
> -      fi
> -      ;;
> -
> -    cygwin* | mingw* | pw32* | cegcc*)
> -      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
> -      # as there is no search path for DLLs.
> -      hardcode_libdir_flag_spec='-L$libdir'
> -      export_dynamic_flag_spec='${wl}--export-all-symbols'
> -      allow_undefined_flag=unsupported
> -      always_export_symbols=no
> -      enable_shared_with_static_runtimes=yes
> -      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
> -      exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
> -
> -      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
> -        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
> -	# If the export-symbols file already is a .def file (1st line
> -	# is EXPORTS), use it as is; otherwise, prepend...
> -	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
> -	  cp $export_symbols $output_objdir/$soname.def;
> -	else
> -	  echo EXPORTS > $output_objdir/$soname.def;
> -	  cat $export_symbols >> $output_objdir/$soname.def;
> -	fi~
> -	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
> -      else
> -	ld_shlibs=no
> -      fi
> -      ;;
> -
> -    haiku*)
> -      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
> -      link_all_deplibs=yes
> -      ;;
> -
> -    interix[3-9]*)
> -      hardcode_direct=no
> -      hardcode_shlibpath_var=no
> -      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
> -      export_dynamic_flag_spec='${wl}-E'
> -      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
> -      # Instead, shared libraries are loaded at an image base (0x10000000 by
> -      # default) and relocated if they conflict, which is a slow very memory
> -      # consuming and fragmenting process.  To avoid this, we pick a random,
> -      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
> -      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
> -      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
> -      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
> -      ;;
> -
> -    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
> -      tmp_diet=no
> -      if test "$host_os" = linux-dietlibc; then
> -	case $cc_basename in
> -	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
> -	esac
> -      fi
> -      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
> -	 && test "$tmp_diet" = no
> -      then
> -	tmp_addflag=' $pic_flag'
> -	tmp_sharedflag='-shared'
> -	case $cc_basename,$host_cpu in
> -        pgcc*)				# Portland Group C compiler
> -	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
> -	  tmp_addflag=' $pic_flag'
> -	  ;;
> -	pgf77* | pgf90* | pgf95* | pgfortran*)
> -					# Portland Group f77 and f90 compilers
> -	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
> -	  tmp_addflag=' $pic_flag -Mnomain' ;;
> -	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
> -	  tmp_addflag=' -i_dynamic' ;;
> -	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
> -	  tmp_addflag=' -i_dynamic -nofor_main' ;;
> -	ifc* | ifort*)			# Intel Fortran compiler
> -	  tmp_addflag=' -nofor_main' ;;
> -	lf95*)				# Lahey Fortran 8.1
> -	  whole_archive_flag_spec=
> -	  tmp_sharedflag='--shared' ;;
> -	xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
> -	  tmp_sharedflag='-qmkshrobj'
> -	  tmp_addflag= ;;
> -	nvcc*)	# Cuda Compiler Driver 2.2
> -	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
> -	  compiler_needs_object=yes
> -	  ;;
> -	esac
> -	case `$CC -V 2>&1 | sed 5q` in
> -	*Sun\ C*)			# Sun C 5.9
> -	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
> -	  compiler_needs_object=yes
> -	  tmp_sharedflag='-G' ;;
> -	*Sun\ F*)			# Sun Fortran 8.3
> -	  tmp_sharedflag='-G' ;;
> -	esac
> -	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
> -
> -        if test "x$supports_anon_versioning" = xyes; then
> -          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
> -	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
> -	    echo "local: *; };" >> $output_objdir/$libname.ver~
> -	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
> -        fi
> -
> -	case $cc_basename in
> -	xlf* | bgf* | bgxlf* | mpixlf*)
> -	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
> -	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
> -	  hardcode_libdir_flag_spec=
> -	  hardcode_libdir_flag_spec_ld='-rpath $libdir'
> -	  archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
> -	  if test "x$supports_anon_versioning" = xyes; then
> -	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
> -	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
> -	      echo "local: *; };" >> $output_objdir/$libname.ver~
> -	      $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
> -	  fi
> -	  ;;
> -	esac
> -      else
> -        ld_shlibs=no
> -      fi
> -      ;;
> -
> -    netbsd* | netbsdelf*-gnu)
> -      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
> -	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
> -	wlarc=
> -      else
> -	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
> -	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
> -      fi
> -      ;;
> -
> -    solaris*)
> -      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
> -	ld_shlibs=no
> -	cat <<_LT_EOF 1>&2
> -
> -*** Warning: The releases 2.8.* of the GNU linker cannot reliably
> -*** create shared libraries on Solaris systems.  Therefore, libtool
> -*** is disabling shared libraries support.  We urge you to upgrade GNU
> -*** binutils to release 2.9.1 or newer.  Another option is to modify
> -*** your PATH or compiler configuration so that the native linker is
> -*** used, and then restart.
> -
> -_LT_EOF
> -      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
> -	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
> -	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
> -      else
> -	ld_shlibs=no
> -      fi
> -      ;;
> -
> -    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
> -      case `$LD -v 2>&1` in
> -        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
> -	ld_shlibs=no
> -	cat <<_LT_EOF 1>&2
> -
> -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
> -*** reliably create shared libraries on SCO systems.  Therefore, libtool
> -*** is disabling shared libraries support.  We urge you to upgrade GNU
> -*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
> -*** your PATH or compiler configuration so that the native linker is
> -*** used, and then restart.
> -
> -_LT_EOF
> -	;;
> -	*)
> -	  # For security reasons, it is highly recommended that you always
> -	  # use absolute paths for naming shared libraries, and exclude the
> -	  # DT_RUNPATH tag from executables and libraries.  But doing so
> -	  # requires that you compile everything twice, which is a pain.
> -	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
> -	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
> -	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
> -	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
> -	  else
> -	    ld_shlibs=no
> -	  fi
> -	;;
> -      esac
> -      ;;
> -
> -    sunos4*)
> -      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
> -      wlarc=
> -      hardcode_direct=yes
> -      hardcode_shlibpath_var=no
> -      ;;
> -
> -    *)
> -      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
> -	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
> -	archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
> -      else
> -	ld_shlibs=no
> -      fi
> -      ;;
> -    esac
> -
> -    if test "$ld_shlibs" = no; then
> -      runpath_var=
> -      hardcode_libdir_flag_spec=
> -      export_dynamic_flag_spec=
> -      whole_archive_flag_spec=
> -    fi
> -  else
> -    # PORTME fill in a description of your system's linker (not GNU ld)
> -    case $host_os in
> -    aix3*)
> -      allow_undefined_flag=unsupported
> -      always_export_symbols=yes
> -      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
> -      # Note: this linker hardcodes the directories in LIBPATH if there
> -      # are no directories specified by -L.
> -      hardcode_minus_L=yes
> -      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
> -	# Neither direct hardcoding nor static linking is supported with a
> -	# broken collect2.
> -	hardcode_direct=unsupported
> -      fi
> -      ;;
> -
> -    aix[4-9]*)
> -      if test "$host_cpu" = ia64; then
> -	# On IA64, the linker does run time linking by default, so we don't
> -	# have to do anything special.
> -	aix_use_runtimelinking=no
> -	exp_sym_flag='-Bexport'
> -	no_entry_flag=""
> -      else
> -	# If we're using GNU nm, then we don't want the "-C" option.
> -	# -C means demangle to AIX nm, but means don't demangle with GNU nm
> -	# Also, AIX nm treats weak defined symbols like other global
> -	# defined symbols, whereas GNU nm marks them as "W".
> -	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
> -	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
> -	else
> -	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
> -	fi
> -	aix_use_runtimelinking=no
> -
> -	# Test if we are trying to use run time linking or normal
> -	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
> -	# need to do runtime linking.
> -	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
> -	  for ld_flag in $LDFLAGS; do
> -	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
> -	    aix_use_runtimelinking=yes
> -	    break
> -	  fi
> -	  done
> -	  ;;
> -	esac
> -
> -	exp_sym_flag='-bexport'
> -	no_entry_flag='-bnoentry'
> -      fi
> -
> -      # When large executables or shared objects are built, AIX ld can
> -      # have problems creating the table of contents.  If linking a library
> -      # or program results in "error TOC overflow" add -mminimal-toc to
> -      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
> -      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
> -
> -      archive_cmds=''
> -      hardcode_direct=yes
> -      hardcode_direct_absolute=yes
> -      hardcode_libdir_separator=':'
> -      link_all_deplibs=yes
> -      file_list_spec='${wl}-f,'
> -
> -      if test "$GCC" = yes; then
> -	case $host_os in aix4.[012]|aix4.[012].*)
> -	# We only want to do this on AIX 4.2 and lower, the check
> -	# below for broken collect2 doesn't work under 4.3+
> -	  collect2name=`${CC} -print-prog-name=collect2`
> -	  if test -f "$collect2name" &&
> -	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
> -	  then
> -	  # We have reworked collect2
> -	  :
> -	  else
> -	  # We have old collect2
> -	  hardcode_direct=unsupported
> -	  # It fails to find uninstalled libraries when the uninstalled
> -	  # path is not listed in the libpath.  Setting hardcode_minus_L
> -	  # to unsupported forces relinking
> -	  hardcode_minus_L=yes
> -	  hardcode_libdir_flag_spec='-L$libdir'
> -	  hardcode_libdir_separator=
> -	  fi
> -	  ;;
> -	esac
> -	shared_flag='-shared'
> -	if test "$aix_use_runtimelinking" = yes; then
> -	  shared_flag="$shared_flag "'${wl}-G'
> -	fi
> -	link_all_deplibs=no
> -      else
> -	# not using gcc
> -	if test "$host_cpu" = ia64; then
> -	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
> -	# chokes on -Wl,-G. The following line is correct:
> -	  shared_flag='-G'
> -	else
> -	  if test "$aix_use_runtimelinking" = yes; then
> -	    shared_flag='${wl}-G'
> -	  else
> -	    shared_flag='${wl}-bM:SRE'
> -	  fi
> -	fi
> -      fi
> -
> -      export_dynamic_flag_spec='${wl}-bexpall'
> -      # It seems that -bexpall does not export symbols beginning with
> -      # underscore (_), so it is better to generate a list of symbols to export.
> -      always_export_symbols=yes
> -      if test "$aix_use_runtimelinking" = yes; then
> -	# Warning - without using the other runtime loading flags (-brtl),
> -	# -berok will link without error, but may produce a broken library.
> -	allow_undefined_flag='-berok'
> -        # Determine the default libpath from the value encoded in an
> -        # empty executable.
> -        if test "${lt_cv_aix_libpath+set}" = set; then
> -  aix_libpath=$lt_cv_aix_libpath
> -else
> -  if ${lt_cv_aix_libpath_+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -int
> -main ()
> -{
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -
> -  lt_aix_libpath_sed='
> -      /Import File Strings/,/^$/ {
> -	  /^0/ {
> -	      s/^0  *\([^ ]*\) *$/\1/
> -	      p
> -	  }
> -      }'
> -  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
> -  # Check for a 64-bit object if we didn't find anything.
> -  if test -z "$lt_cv_aix_libpath_"; then
> -    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
> -  fi
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -  if test -z "$lt_cv_aix_libpath_"; then
> -    lt_cv_aix_libpath_="/usr/lib:/lib"
> -  fi
> -
> -fi
> -
> -  aix_libpath=$lt_cv_aix_libpath_
> -fi
> -
> -        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
> -        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
> -      else
> -	if test "$host_cpu" = ia64; then
> -	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
> -	  allow_undefined_flag="-z nodefs"
> -	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
> -	else
> -	 # Determine the default libpath from the value encoded in an
> -	 # empty executable.
> -	 if test "${lt_cv_aix_libpath+set}" = set; then
> -  aix_libpath=$lt_cv_aix_libpath
> -else
> -  if ${lt_cv_aix_libpath_+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -int
> -main ()
> -{
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -
> -  lt_aix_libpath_sed='
> -      /Import File Strings/,/^$/ {
> -	  /^0/ {
> -	      s/^0  *\([^ ]*\) *$/\1/
> -	      p
> -	  }
> -      }'
> -  lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
> -  # Check for a 64-bit object if we didn't find anything.
> -  if test -z "$lt_cv_aix_libpath_"; then
> -    lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
> -  fi
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -  if test -z "$lt_cv_aix_libpath_"; then
> -    lt_cv_aix_libpath_="/usr/lib:/lib"
> -  fi
> -
> -fi
> -
> -  aix_libpath=$lt_cv_aix_libpath_
> -fi
> -
> -	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
> -	  # Warning - without using the other run time loading flags,
> -	  # -berok will link without error, but may produce a broken library.
> -	  no_undefined_flag=' ${wl}-bernotok'
> -	  allow_undefined_flag=' ${wl}-berok'
> -	  if test "$with_gnu_ld" = yes; then
> -	    # We only use this code for GNU lds that support --whole-archive.
> -	    whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
> -	  else
> -	    # Exported symbols can be pulled into shared objects from archives
> -	    whole_archive_flag_spec='$convenience'
> -	  fi
> -	  archive_cmds_need_lc=yes
> -	  # This is similar to how AIX traditionally builds its shared libraries.
> -	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
> -	fi
> -      fi
> -      ;;
> -
> -    amigaos*)
> -      case $host_cpu in
> -      powerpc)
> -            # see comment about AmigaOS4 .so support
> -            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
> -            archive_expsym_cmds=''
> -        ;;
> -      m68k)
> -            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
> -            hardcode_libdir_flag_spec='-L$libdir'
> -            hardcode_minus_L=yes
> -        ;;
> -      esac
> -      ;;
> -
> -    bsdi[45]*)
> -      export_dynamic_flag_spec=-rdynamic
> -      ;;
> -
> -    cygwin* | mingw* | pw32* | cegcc*)
> -      # When not using gcc, we currently assume that we are using
> -      # Microsoft Visual C++.
> -      # hardcode_libdir_flag_spec is actually meaningless, as there is
> -      # no search path for DLLs.
> -      case $cc_basename in
> -      cl*)
> -	# Native MSVC
> -	hardcode_libdir_flag_spec=' '
> -	allow_undefined_flag=unsupported
> -	always_export_symbols=yes
> -	file_list_spec='@'
> -	# Tell ltmain to make .lib files, not .a files.
> -	libext=lib
> -	# Tell ltmain to make .dll files, not .so files.
> -	shrext_cmds=".dll"
> -	# FIXME: Setting linknames here is a bad hack.
> -	archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
> -	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
> -	    sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
> -	  else
> -	    sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
> -	  fi~
> -	  $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
> -	  linknames='
> -	# The linker will not automatically build a static lib if we build a DLL.
> -	# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
> -	enable_shared_with_static_runtimes=yes
> -	export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
> -	# Don't use ranlib
> -	old_postinstall_cmds='chmod 644 $oldlib'
> -	postlink_cmds='lt_outputfile="@OUTPUT@"~
> -	  lt_tool_outputfile="@TOOL_OUTPUT@"~
> -	  case $lt_outputfile in
> -	    *.exe|*.EXE) ;;
> -	    *)
> -	      lt_outputfile="$lt_outputfile.exe"
> -	      lt_tool_outputfile="$lt_tool_outputfile.exe"
> -	      ;;
> -	  esac~
> -	  if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
> -	    $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
> -	    $RM "$lt_outputfile.manifest";
> -	  fi'
> -	;;
> -      *)
> -	# Assume MSVC wrapper
> -	hardcode_libdir_flag_spec=' '
> -	allow_undefined_flag=unsupported
> -	# Tell ltmain to make .lib files, not .a files.
> -	libext=lib
> -	# Tell ltmain to make .dll files, not .so files.
> -	shrext_cmds=".dll"
> -	# FIXME: Setting linknames here is a bad hack.
> -	archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
> -	# The linker will automatically build a .lib file if we build a DLL.
> -	old_archive_from_new_cmds='true'
> -	# FIXME: Should let the user specify the lib program.
> -	old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
> -	enable_shared_with_static_runtimes=yes
> -	;;
> -      esac
> -      ;;
> -
> -    darwin* | rhapsody*)
> -
> -
> -  archive_cmds_need_lc=no
> -  hardcode_direct=no
> -  hardcode_automatic=yes
> -  hardcode_shlibpath_var=unsupported
> -  if test "$lt_cv_ld_force_load" = "yes"; then
> -    whole_archive_flag_spec='`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
> -  else
> -    whole_archive_flag_spec=''
> -  fi
> -  link_all_deplibs=yes
> -  allow_undefined_flag="$_lt_dar_allow_undefined"
> -  case $cc_basename in
> -     ifort*) _lt_dar_can_shared=yes ;;
> -     *) _lt_dar_can_shared=$GCC ;;
> -  esac
> -  if test "$_lt_dar_can_shared" = "yes"; then
> -    output_verbose_link_cmd=func_echo_all
> -    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
> -    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
> -    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
> -    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
> -
> -  else
> -  ld_shlibs=no
> -  fi
> -
> -      ;;
> -
> -    dgux*)
> -      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
> -      hardcode_libdir_flag_spec='-L$libdir'
> -      hardcode_shlibpath_var=no
> -      ;;
> -
> -    freebsd1*)
> -      ld_shlibs=no
> -      ;;
> -
> -    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
> -    # support.  Future versions do this automatically, but an explicit c++rt0.o
> -    # does not break anything, and helps significantly (at the cost of a little
> -    # extra space).
> -    freebsd2.2*)
> -      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
> -      hardcode_libdir_flag_spec='-R$libdir'
> -      hardcode_direct=yes
> -      hardcode_shlibpath_var=no
> -      ;;
> -
> -    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
> -    freebsd2*)
> -      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
> -      hardcode_direct=yes
> -      hardcode_minus_L=yes
> -      hardcode_shlibpath_var=no
> -      ;;
> -
> -    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
> -    freebsd* | dragonfly*)
> -      archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
> -      hardcode_libdir_flag_spec='-R$libdir'
> -      hardcode_direct=yes
> -      hardcode_shlibpath_var=no
> -      ;;
> -
> -    hpux9*)
> -      if test "$GCC" = yes; then
> -	archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
> -      else
> -	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
> -      fi
> -      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
> -      hardcode_libdir_separator=:
> -      hardcode_direct=yes
> -
> -      # hardcode_minus_L: Not really in the search PATH,
> -      # but as the default location of the library.
> -      hardcode_minus_L=yes
> -      export_dynamic_flag_spec='${wl}-E'
> -      ;;
> -
> -    hpux10*)
> -      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
> -	archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
> -      else
> -	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
> -      fi
> -      if test "$with_gnu_ld" = no; then
> -	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
> -	hardcode_libdir_flag_spec_ld='+b $libdir'
> -	hardcode_libdir_separator=:
> -	hardcode_direct=yes
> -	hardcode_direct_absolute=yes
> -	export_dynamic_flag_spec='${wl}-E'
> -	# hardcode_minus_L: Not really in the search PATH,
> -	# but as the default location of the library.
> -	hardcode_minus_L=yes
> -      fi
> -      ;;
> -
> -    hpux11*)
> -      if test "$GCC" = yes && test "$with_gnu_ld" = no; then
> -	case $host_cpu in
> -	hppa*64*)
> -	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
> -	  ;;
> -	ia64*)
> -	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
> -	  ;;
> -	*)
> -	  archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
> -	  ;;
> -	esac
> -      else
> -	case $host_cpu in
> -	hppa*64*)
> -	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
> -	  ;;
> -	ia64*)
> -	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
> -	  ;;
> -	*)
> -
> -	  # Older versions of the 11.00 compiler do not understand -b yet
> -	  # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
> -	  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
> -$as_echo_n "checking if $CC understands -b... " >&6; }
> -if ${lt_cv_prog_compiler__b+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_prog_compiler__b=no
> -   save_LDFLAGS="$LDFLAGS"
> -   LDFLAGS="$LDFLAGS -b"
> -   echo "$lt_simple_link_test_code" > conftest.$ac_ext
> -   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
> -     # The linker can only warn and ignore the option if not recognized
> -     # So say no if there are warnings
> -     if test -s conftest.err; then
> -       # Append any errors to the config.log.
> -       cat conftest.err 1>&5
> -       $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
> -       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
> -       if diff conftest.exp conftest.er2 >/dev/null; then
> -         lt_cv_prog_compiler__b=yes
> -       fi
> -     else
> -       lt_cv_prog_compiler__b=yes
> -     fi
> -   fi
> -   $RM -r conftest*
> -   LDFLAGS="$save_LDFLAGS"
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
> -$as_echo "$lt_cv_prog_compiler__b" >&6; }
> -
> -if test x"$lt_cv_prog_compiler__b" = xyes; then
> -    archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
> -else
> -    archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
> -fi
> -
> -	  ;;
> -	esac
> -      fi
> -      if test "$with_gnu_ld" = no; then
> -	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
> -	hardcode_libdir_separator=:
> -
> -	case $host_cpu in
> -	hppa*64*|ia64*)
> -	  hardcode_direct=no
> -	  hardcode_shlibpath_var=no
> -	  ;;
> -	*)
> -	  hardcode_direct=yes
> -	  hardcode_direct_absolute=yes
> -	  export_dynamic_flag_spec='${wl}-E'
> -
> -	  # hardcode_minus_L: Not really in the search PATH,
> -	  # but as the default location of the library.
> -	  hardcode_minus_L=yes
> -	  ;;
> -	esac
> -      fi
> -      ;;
> -
> -    irix5* | irix6* | nonstopux*)
> -      if test "$GCC" = yes; then
> -	archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
> -	# Try to use the -exported_symbol ld option, if it does not
> -	# work, assume that -exports_file does not work either and
> -	# implicitly export all symbols.
> -	# This should be the same for all languages, so no per-tag cache variable.
> -	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
> -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
> -if ${lt_cv_irix_exported_symbol+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  save_LDFLAGS="$LDFLAGS"
> -	   LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
> -	   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -int foo (void) { return 0; }
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -  lt_cv_irix_exported_symbol=yes
> -else
> -  lt_cv_irix_exported_symbol=no
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -           LDFLAGS="$save_LDFLAGS"
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
> -$as_echo "$lt_cv_irix_exported_symbol" >&6; }
> -	if test "$lt_cv_irix_exported_symbol" = yes; then
> -          archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
> -	fi
> -      else
> -	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
> -	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
> -      fi
> -      archive_cmds_need_lc='no'
> -      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
> -      hardcode_libdir_separator=:
> -      inherit_rpath=yes
> -      link_all_deplibs=yes
> -      ;;
> -
> -    netbsd* | netbsdelf*-gnu)
> -      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
> -	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
> -      else
> -	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
> -      fi
> -      hardcode_libdir_flag_spec='-R$libdir'
> -      hardcode_direct=yes
> -      hardcode_shlibpath_var=no
> -      ;;
> -
> -    newsos6)
> -      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
> -      hardcode_direct=yes
> -      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
> -      hardcode_libdir_separator=:
> -      hardcode_shlibpath_var=no
> -      ;;
> -
> -    *nto* | *qnx*)
> -      ;;
> -
> -    openbsd*)
> -      if test -f /usr/libexec/ld.so; then
> -	hardcode_direct=yes
> -	hardcode_shlibpath_var=no
> -	hardcode_direct_absolute=yes
> -	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
> -	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
> -	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
> -	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
> -	  export_dynamic_flag_spec='${wl}-E'
> -	else
> -	  case $host_os in
> -	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
> -	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
> -	     hardcode_libdir_flag_spec='-R$libdir'
> -	     ;;
> -	   *)
> -	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
> -	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
> -	     ;;
> -	  esac
> -	fi
> -      else
> -	ld_shlibs=no
> -      fi
> -      ;;
> -
> -    os2*)
> -      hardcode_libdir_flag_spec='-L$libdir'
> -      hardcode_minus_L=yes
> -      allow_undefined_flag=unsupported
> -      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
> -      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
> -      ;;
> -
> -    osf3*)
> -      if test "$GCC" = yes; then
> -	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
> -	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
> -      else
> -	allow_undefined_flag=' -expect_unresolved \*'
> -	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
> -      fi
> -      archive_cmds_need_lc='no'
> -      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
> -      hardcode_libdir_separator=:
> -      ;;
> -
> -    osf4* | osf5*)	# as osf3* with the addition of -msym flag
> -      if test "$GCC" = yes; then
> -	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
> -	archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
> -	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
> -      else
> -	allow_undefined_flag=' -expect_unresolved \*'
> -	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
> -	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
> -	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
> -
> -	# Both c and cxx compiler support -rpath directly
> -	hardcode_libdir_flag_spec='-rpath $libdir'
> -      fi
> -      archive_cmds_need_lc='no'
> -      hardcode_libdir_separator=:
> -      ;;
> -
> -    solaris*)
> -      no_undefined_flag=' -z defs'
> -      if test "$GCC" = yes; then
> -	wlarc='${wl}'
> -	archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
> -	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
> -	  $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
> -      else
> -	case `$CC -V 2>&1` in
> -	*"Compilers 5.0"*)
> -	  wlarc=''
> -	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
> -	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
> -	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
> -	  ;;
> -	*)
> -	  wlarc='${wl}'
> -	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
> -	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
> -	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
> -	  ;;
> -	esac
> -      fi
> -      hardcode_libdir_flag_spec='-R$libdir'
> -      hardcode_shlibpath_var=no
> -      case $host_os in
> -      solaris2.[0-5] | solaris2.[0-5].*) ;;
> -      *)
> -	# The compiler driver will combine and reorder linker options,
> -	# but understands `-z linker_flag'.  GCC discards it without `$wl',
> -	# but is careful enough not to reorder.
> -	# Supported since Solaris 2.6 (maybe 2.5.1?)
> -	if test "$GCC" = yes; then
> -	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
> -	else
> -	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
> -	fi
> -	;;
> -      esac
> -      link_all_deplibs=yes
> -      ;;
> -
> -    sunos4*)
> -      if test "x$host_vendor" = xsequent; then
> -	# Use $CC to link under sequent, because it throws in some extra .o
> -	# files that make .init and .fini sections work.
> -	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
> -      else
> -	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
> -      fi
> -      hardcode_libdir_flag_spec='-L$libdir'
> -      hardcode_direct=yes
> -      hardcode_minus_L=yes
> -      hardcode_shlibpath_var=no
> -      ;;
> -
> -    sysv4)
> -      case $host_vendor in
> -	sni)
> -	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
> -	  hardcode_direct=yes # is this really true???
> -	;;
> -	siemens)
> -	  ## LD is ld it makes a PLAMLIB
> -	  ## CC just makes a GrossModule.
> -	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
> -	  reload_cmds='$CC -r -o $output$reload_objs'
> -	  hardcode_direct=no
> -        ;;
> -	motorola)
> -	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
> -	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
> -	;;
> -      esac
> -      runpath_var='LD_RUN_PATH'
> -      hardcode_shlibpath_var=no
> -      ;;
> -
> -    sysv4.3*)
> -      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
> -      hardcode_shlibpath_var=no
> -      export_dynamic_flag_spec='-Bexport'
> -      ;;
> -
> -    sysv4*MP*)
> -      if test -d /usr/nec; then
> -	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
> -	hardcode_shlibpath_var=no
> -	runpath_var=LD_RUN_PATH
> -	hardcode_runpath_var=yes
> -	ld_shlibs=yes
> -      fi
> -      ;;
> -
> -    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
> -      no_undefined_flag='${wl}-z,text'
> -      archive_cmds_need_lc=no
> -      hardcode_shlibpath_var=no
> -      runpath_var='LD_RUN_PATH'
> -
> -      if test "$GCC" = yes; then
> -	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
> -	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
> -      else
> -	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
> -	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
> -      fi
> -      ;;
> -
> -    sysv5* | sco3.2v5* | sco5v6*)
> -      # Note: We can NOT use -z defs as we might desire, because we do not
> -      # link with -lc, and that would cause any symbols used from libc to
> -      # always be unresolved, which means just about no library would
> -      # ever link correctly.  If we're not using GNU ld we use -z text
> -      # though, which does catch some bad symbols but isn't as heavy-handed
> -      # as -z defs.
> -      no_undefined_flag='${wl}-z,text'
> -      allow_undefined_flag='${wl}-z,nodefs'
> -      archive_cmds_need_lc=no
> -      hardcode_shlibpath_var=no
> -      hardcode_libdir_flag_spec='${wl}-R,$libdir'
> -      hardcode_libdir_separator=':'
> -      link_all_deplibs=yes
> -      export_dynamic_flag_spec='${wl}-Bexport'
> -      runpath_var='LD_RUN_PATH'
> -
> -      if test "$GCC" = yes; then
> -	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
> -	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
> -      else
> -	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
> -	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
> -      fi
> -      ;;
> -
> -    uts4*)
> -      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
> -      hardcode_libdir_flag_spec='-L$libdir'
> -      hardcode_shlibpath_var=no
> -      ;;
> -
> -    *)
> -      ld_shlibs=no
> -      ;;
> -    esac
> -
> -    if test x$host_vendor = xsni; then
> -      case $host in
> -      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
> -	export_dynamic_flag_spec='${wl}-Blargedynsym'
> -	;;
> -      esac
> -    fi
> -  fi
> -
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
> -$as_echo "$ld_shlibs" >&6; }
> -test "$ld_shlibs" = no && can_build_shared=no
> -
> -with_gnu_ld=$with_gnu_ld
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -#
> -# Do we need to explicitly link libc?
> -#
> -case "x$archive_cmds_need_lc" in
> -x|xyes)
> -  # Assume -lc should be added
> -  archive_cmds_need_lc=yes
> -
> -  if test "$enable_shared" = yes && test "$GCC" = yes; then
> -    case $archive_cmds in
> -    *'~'*)
> -      # FIXME: we may have to deal with multi-command sequences.
> -      ;;
> -    '$CC '*)
> -      # Test whether the compiler implicitly links with -lc since on some
> -      # systems, -lgcc has to come before -lc. If gcc already passes -lc
> -      # to ld, don't add -lc before -lgcc.
> -      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
> -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
> -if ${lt_cv_archive_cmds_need_lc+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  $RM conftest*
> -	echo "$lt_simple_compile_test_code" > conftest.$ac_ext
> -
> -	if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
> -  (eval $ac_compile) 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; } 2>conftest.err; then
> -	  soname=conftest
> -	  lib=conftest
> -	  libobjs=conftest.$ac_objext
> -	  deplibs=
> -	  wl=$lt_prog_compiler_wl
> -	  pic_flag=$lt_prog_compiler_pic
> -	  compiler_flags=-v
> -	  linker_flags=-v
> -	  verstring=
> -	  output_objdir=.
> -	  libname=conftest
> -	  lt_save_allow_undefined_flag=$allow_undefined_flag
> -	  allow_undefined_flag=
> -	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
> -  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; }
> -	  then
> -	    lt_cv_archive_cmds_need_lc=no
> -	  else
> -	    lt_cv_archive_cmds_need_lc=yes
> -	  fi
> -	  allow_undefined_flag=$lt_save_allow_undefined_flag
> -	else
> -	  cat conftest.err 1>&5
> -	fi
> -	$RM conftest*
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
> -$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
> -      archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
> -      ;;
> -    esac
> -  fi
> -  ;;
> -esac
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
> -$as_echo_n "checking dynamic linker characteristics... " >&6; }
> -
> -if test "$GCC" = yes; then
> -  case $host_os in
> -    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
> -    *) lt_awk_arg="/^libraries:/" ;;
> -  esac
> -  case $host_os in
> -    mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
> -    *) lt_sed_strip_eq="s,=/,/,g" ;;
> -  esac
> -  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
> -  case $lt_search_path_spec in
> -  *\;*)
> -    # if the path contains ";" then we assume it to be the separator
> -    # otherwise default to the standard path separator (i.e. ":") - it is
> -    # assumed that no part of a normal pathname contains ";" but that should
> -    # okay in the real world where ";" in dirpaths is itself problematic.
> -    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
> -    ;;
> -  *)
> -    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
> -    ;;
> -  esac
> -  # Ok, now we have the path, separated by spaces, we can step through it
> -  # and add multilib dir if necessary.
> -  lt_tmp_lt_search_path_spec=
> -  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
> -  for lt_sys_path in $lt_search_path_spec; do
> -    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
> -      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
> -    else
> -      test -d "$lt_sys_path" && \
> -	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
> -    fi
> -  done
> -  lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
> -BEGIN {RS=" "; FS="/|\n";} {
> -  lt_foo="";
> -  lt_count=0;
> -  for (lt_i = NF; lt_i > 0; lt_i--) {
> -    if ($lt_i != "" && $lt_i != ".") {
> -      if ($lt_i == "..") {
> -        lt_count++;
> -      } else {
> -        if (lt_count == 0) {
> -          lt_foo="/" $lt_i lt_foo;
> -        } else {
> -          lt_count--;
> -        }
> -      }
> -    }
> -  }
> -  if (lt_foo != "") { lt_freq[lt_foo]++; }
> -  if (lt_freq[lt_foo] == 1) { print lt_foo; }
> -}'`
> -  # AWK program above erroneously prepends '/' to C:/dos/paths
> -  # for these hosts.
> -  case $host_os in
> -    mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
> -      $SED 's,/\([A-Za-z]:\),\1,g'` ;;
> -  esac
> -  sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
> -else
> -  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
> -fi
> -library_names_spec=
> -libname_spec='lib$name'
> -soname_spec=
> -shrext_cmds=".so"
> -postinstall_cmds=
> -postuninstall_cmds=
> -finish_cmds=
> -finish_eval=
> -shlibpath_var=
> -shlibpath_overrides_runpath=unknown
> -version_type=none
> -dynamic_linker="$host_os ld.so"
> -sys_lib_dlsearch_path_spec="/lib /usr/lib"
> -need_lib_prefix=unknown
> -hardcode_into_libs=no
> -
> -# when you set need_version to no, make sure it does not cause -set_version
> -# flags to be left without arguments
> -need_version=unknown
> -
> -case $host_os in
> -aix3*)
> -  version_type=linux
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
> -  shlibpath_var=LIBPATH
> -
> -  # AIX 3 has no versioning support, so we append a major version to the name.
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  ;;
> -
> -aix[4-9]*)
> -  version_type=linux
> -  need_lib_prefix=no
> -  need_version=no
> -  hardcode_into_libs=yes
> -  if test "$host_cpu" = ia64; then
> -    # AIX 5 supports IA64
> -    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
> -    shlibpath_var=LD_LIBRARY_PATH
> -  else
> -    # With GCC up to 2.95.x, collect2 would create an import file
> -    # for dependence libraries.  The import file would start with
> -    # the line `#! .'.  This would cause the generated library to
> -    # depend on `.', always an invalid library.  This was fixed in
> -    # development snapshots of GCC prior to 3.0.
> -    case $host_os in
> -      aix4 | aix4.[01] | aix4.[01].*)
> -      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
> -	   echo ' yes '
> -	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
> -	:
> -      else
> -	can_build_shared=no
> -      fi
> -      ;;
> -    esac
> -    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
> -    # soname into executable. Probably we can add versioning support to
> -    # collect2, so additional links can be useful in future.
> -    if test "$aix_use_runtimelinking" = yes; then
> -      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
> -      # instead of lib<name>.a to let people know that these are not
> -      # typical AIX shared libraries.
> -      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -    else
> -      # We preserve .a as extension for shared libraries through AIX4.2
> -      # and later when we are not doing run time linking.
> -      library_names_spec='${libname}${release}.a $libname.a'
> -      soname_spec='${libname}${release}${shared_ext}$major'
> -    fi
> -    shlibpath_var=LIBPATH
> -  fi
> -  ;;
> -
> -amigaos*)
> -  case $host_cpu in
> -  powerpc)
> -    # Since July 2007 AmigaOS4 officially supports .so libraries.
> -    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
> -    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -    ;;
> -  m68k)
> -    library_names_spec='$libname.ixlibrary $libname.a'
> -    # Create ${libname}_ixlibrary.a entries in /sys/libs.
> -    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
> -    ;;
> -  esac
> -  ;;
> -
> -beos*)
> -  library_names_spec='${libname}${shared_ext}'
> -  dynamic_linker="$host_os ld.so"
> -  shlibpath_var=LIBRARY_PATH
> -  ;;
> -
> -bsdi[45]*)
> -  version_type=linux
> -  need_version=no
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
> -  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
> -  # the default ld.so.conf also contains /usr/contrib/lib and
> -  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
> -  # libtool to hard-code these into programs
> -  ;;
> -
> -cygwin* | mingw* | pw32* | cegcc*)
> -  version_type=windows
> -  shrext_cmds=".dll"
> -  need_version=no
> -  need_lib_prefix=no
> -
> -  case $GCC,$cc_basename in
> -  yes,*)
> -    # gcc
> -    library_names_spec='$libname.dll.a'
> -    # DLL is installed to $(libdir)/../bin by postinstall_cmds
> -    postinstall_cmds='base_file=`basename \${file}`~
> -      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
> -      dldir=$destdir/`dirname \$dlpath`~
> -      test -d \$dldir || mkdir -p \$dldir~
> -      $install_prog $dir/$dlname \$dldir/$dlname~
> -      chmod a+x \$dldir/$dlname~
> -      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
> -        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
> -      fi'
> -    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
> -      dlpath=$dir/\$dldll~
> -       $RM \$dlpath'
> -    shlibpath_overrides_runpath=yes
> -
> -    case $host_os in
> -    cygwin*)
> -      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
> -      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
> -
> -      sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
> -      ;;
> -    mingw* | cegcc*)
> -      # MinGW DLLs use traditional 'lib' prefix
> -      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
> -      ;;
> -    pw32*)
> -      # pw32 DLLs use 'pw' prefix rather than 'lib'
> -      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
> -      ;;
> -    esac
> -    dynamic_linker='Win32 ld.exe'
> -    ;;
> -
> -  *,cl*)
> -    # Native MSVC
> -    libname_spec='$name'
> -    soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
> -    library_names_spec='${libname}.dll.lib'
> -
> -    case $build_os in
> -    mingw*)
> -      sys_lib_search_path_spec=
> -      lt_save_ifs=$IFS
> -      IFS=';'
> -      for lt_path in $LIB
> -      do
> -        IFS=$lt_save_ifs
> -        # Let DOS variable expansion print the short 8.3 style file name.
> -        lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
> -        sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
> -      done
> -      IFS=$lt_save_ifs
> -      # Convert to MSYS style.
> -      sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
> -      ;;
> -    cygwin*)
> -      # Convert to unix form, then to dos form, then back to unix form
> -      # but this time dos style (no spaces!) so that the unix form looks
> -      # like /cygdrive/c/PROGRA~1:/cygdr...
> -      sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
> -      sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
> -      sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
> -      ;;
> -    *)
> -      sys_lib_search_path_spec="$LIB"
> -      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
> -        # It is most probably a Windows format PATH.
> -        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
> -      else
> -        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
> -      fi
> -      # FIXME: find the short name or the path components, as spaces are
> -      # common. (e.g. "Program Files" -> "PROGRA~1")
> -      ;;
> -    esac
> -
> -    # DLL is installed to $(libdir)/../bin by postinstall_cmds
> -    postinstall_cmds='base_file=`basename \${file}`~
> -      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
> -      dldir=$destdir/`dirname \$dlpath`~
> -      test -d \$dldir || mkdir -p \$dldir~
> -      $install_prog $dir/$dlname \$dldir/$dlname'
> -    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
> -      dlpath=$dir/\$dldll~
> -       $RM \$dlpath'
> -    shlibpath_overrides_runpath=yes
> -    dynamic_linker='Win32 link.exe'
> -    ;;
> -
> -  *)
> -    # Assume MSVC wrapper
> -    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
> -    dynamic_linker='Win32 ld.exe'
> -    ;;
> -  esac
> -  # FIXME: first we should search . and the directory the executable is in
> -  shlibpath_var=PATH
> -  ;;
> -
> -darwin* | rhapsody*)
> -  dynamic_linker="$host_os dyld"
> -  version_type=darwin
> -  need_lib_prefix=no
> -  need_version=no
> -  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
> -  soname_spec='${libname}${release}${major}$shared_ext'
> -  shlibpath_overrides_runpath=yes
> -  shlibpath_var=DYLD_LIBRARY_PATH
> -  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
> -
> -  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
> -  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
> -  ;;
> -
> -dgux*)
> -  version_type=linux
> -  need_lib_prefix=no
> -  need_version=no
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  ;;
> -
> -freebsd1*)
> -  dynamic_linker=no
> -  ;;
> -
> -freebsd* | dragonfly*)
> -  # DragonFly does not have aout.  When/if they implement a new
> -  # versioning mechanism, adjust this.
> -  if test -x /usr/bin/objformat; then
> -    objformat=`/usr/bin/objformat`
> -  else
> -    case $host_os in
> -    freebsd[123]*) objformat=aout ;;
> -    *) objformat=elf ;;
> -    esac
> -  fi
> -  version_type=freebsd-$objformat
> -  case $version_type in
> -    freebsd-elf*)
> -      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
> -      need_version=no
> -      need_lib_prefix=no
> -      ;;
> -    freebsd-*)
> -      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
> -      need_version=yes
> -      ;;
> -  esac
> -  shlibpath_var=LD_LIBRARY_PATH
> -  case $host_os in
> -  freebsd2*)
> -    shlibpath_overrides_runpath=yes
> -    ;;
> -  freebsd3.[01]* | freebsdelf3.[01]*)
> -    shlibpath_overrides_runpath=yes
> -    hardcode_into_libs=yes
> -    ;;
> -  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
> -  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
> -    shlibpath_overrides_runpath=no
> -    hardcode_into_libs=yes
> -    ;;
> -  *) # from 4.6 on, and DragonFly
> -    shlibpath_overrides_runpath=yes
> -    hardcode_into_libs=yes
> -    ;;
> -  esac
> -  ;;
> -
> -gnu*)
> -  version_type=linux
> -  need_lib_prefix=no
> -  need_version=no
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  shlibpath_overrides_runpath=no
> -  hardcode_into_libs=yes
> -  ;;
> -
> -haiku*)
> -  version_type=linux
> -  need_lib_prefix=no
> -  need_version=no
> -  dynamic_linker="$host_os runtime_loader"
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  shlibpath_var=LIBRARY_PATH
> -  shlibpath_overrides_runpath=yes
> -  sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
> -  hardcode_into_libs=yes
> -  ;;
> -
> -hpux9* | hpux10* | hpux11*)
> -  # Give a soname corresponding to the major version so that dld.sl refuses to
> -  # link against other versions.
> -  version_type=sunos
> -  need_lib_prefix=no
> -  need_version=no
> -  case $host_cpu in
> -  ia64*)
> -    shrext_cmds='.so'
> -    hardcode_into_libs=yes
> -    dynamic_linker="$host_os dld.so"
> -    shlibpath_var=LD_LIBRARY_PATH
> -    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
> -    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -    soname_spec='${libname}${release}${shared_ext}$major'
> -    if test "X$HPUX_IA64_MODE" = X32; then
> -      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
> -    else
> -      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
> -    fi
> -    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
> -    ;;
> -  hppa*64*)
> -    shrext_cmds='.sl'
> -    hardcode_into_libs=yes
> -    dynamic_linker="$host_os dld.sl"
> -    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
> -    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
> -    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -    soname_spec='${libname}${release}${shared_ext}$major'
> -    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
> -    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
> -    ;;
> -  *)
> -    shrext_cmds='.sl'
> -    dynamic_linker="$host_os dld.sl"
> -    shlibpath_var=SHLIB_PATH
> -    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
> -    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -    soname_spec='${libname}${release}${shared_ext}$major'
> -    ;;
> -  esac
> -  # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
> -  postinstall_cmds='chmod 555 $lib'
> -  # or fails outright, so override atomically:
> -  install_override_mode=555
> -  ;;
> -
> -interix[3-9]*)
> -  version_type=linux
> -  need_lib_prefix=no
> -  need_version=no
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  shlibpath_overrides_runpath=no
> -  hardcode_into_libs=yes
> -  ;;
> -
> -irix5* | irix6* | nonstopux*)
> -  case $host_os in
> -    nonstopux*) version_type=nonstopux ;;
> -    *)
> -	if test "$lt_cv_prog_gnu_ld" = yes; then
> -		version_type=linux
> -	else
> -		version_type=irix
> -	fi ;;
> -  esac
> -  need_lib_prefix=no
> -  need_version=no
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
> -  case $host_os in
> -  irix5* | nonstopux*)
> -    libsuff= shlibsuff=
> -    ;;
> -  *)
> -    case $LD in # libtool.m4 will add one of these switches to LD
> -    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
> -      libsuff= shlibsuff= libmagic=32-bit;;
> -    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
> -      libsuff=32 shlibsuff=N32 libmagic=N32;;
> -    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
> -      libsuff=64 shlibsuff=64 libmagic=64-bit;;
> -    *) libsuff= shlibsuff= libmagic=never-match;;
> -    esac
> -    ;;
> -  esac
> -  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
> -  shlibpath_overrides_runpath=no
> -  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
> -  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
> -  hardcode_into_libs=yes
> -  ;;
> -
> -# No shared lib support for Linux oldld, aout, or coff.
> -linux*oldld* | linux*aout* | linux*coff*)
> -  dynamic_linker=no
> -  ;;
> -
> -# This must be Linux ELF.
> -linux* | k*bsd*-gnu | kopensolaris*-gnu)
> -  version_type=linux
> -  need_lib_prefix=no
> -  need_version=no
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  shlibpath_overrides_runpath=no
> -
> -  # Some binutils ld are patched to set DT_RUNPATH
> -  if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  lt_cv_shlibpath_overrides_runpath=no
> -    save_LDFLAGS=$LDFLAGS
> -    save_libdir=$libdir
> -    eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
> -	 LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
> -    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -int
> -main ()
> -{
> -
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
> -  lt_cv_shlibpath_overrides_runpath=yes
> -fi
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -    LDFLAGS=$save_LDFLAGS
> -    libdir=$save_libdir
> -
> -fi
> -
> -  shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
> -
> -  # This implies no fast_install, which is unacceptable.
> -  # Some rework will be needed to allow for fast_install
> -  # before this can be enabled.
> -  hardcode_into_libs=yes
> -
> -  # Append ld.so.conf contents to the search path
> -  if test -f /etc/ld.so.conf; then
> -    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
> -    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
> -  fi
> -
> -  # We used to test for /lib/ld.so.1 and disable shared libraries on
> -  # powerpc, because MkLinux only supported shared libraries with the
> -  # GNU dynamic linker.  Since this was broken with cross compilers,
> -  # most powerpc-linux boxes support dynamic linking these days and
> -  # people can always --disable-shared, the test was removed, and we
> -  # assume the GNU/Linux dynamic linker is in use.
> -  dynamic_linker='GNU/Linux ld.so'
> -  ;;
> -
> -netbsdelf*-gnu)
> -  version_type=linux
> -  need_lib_prefix=no
> -  need_version=no
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  shlibpath_overrides_runpath=no
> -  hardcode_into_libs=yes
> -  dynamic_linker='NetBSD ld.elf_so'
> -  ;;
> -
> -netbsd*)
> -  version_type=sunos
> -  need_lib_prefix=no
> -  need_version=no
> -  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
> -    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
> -    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
> -    dynamic_linker='NetBSD (a.out) ld.so'
> -  else
> -    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
> -    soname_spec='${libname}${release}${shared_ext}$major'
> -    dynamic_linker='NetBSD ld.elf_so'
> -  fi
> -  shlibpath_var=LD_LIBRARY_PATH
> -  shlibpath_overrides_runpath=yes
> -  hardcode_into_libs=yes
> -  ;;
> -
> -newsos6)
> -  version_type=linux
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  shlibpath_overrides_runpath=yes
> -  ;;
> -
> -*nto* | *qnx*)
> -  version_type=qnx
> -  need_lib_prefix=no
> -  need_version=no
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  shlibpath_overrides_runpath=no
> -  hardcode_into_libs=yes
> -  dynamic_linker='ldqnx.so'
> -  ;;
> -
> -openbsd*)
> -  version_type=sunos
> -  sys_lib_dlsearch_path_spec="/usr/lib"
> -  need_lib_prefix=no
> -  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
> -  case $host_os in
> -    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
> -    *)				need_version=no  ;;
> -  esac
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
> -  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
> -    case $host_os in
> -      openbsd2.[89] | openbsd2.[89].*)
> -	shlibpath_overrides_runpath=no
> -	;;
> -      *)
> -	shlibpath_overrides_runpath=yes
> -	;;
> -      esac
> -  else
> -    shlibpath_overrides_runpath=yes
> -  fi
> -  ;;
> -
> -os2*)
> -  libname_spec='$name'
> -  shrext_cmds=".dll"
> -  need_lib_prefix=no
> -  library_names_spec='$libname${shared_ext} $libname.a'
> -  dynamic_linker='OS/2 ld.exe'
> -  shlibpath_var=LIBPATH
> -  ;;
> -
> -osf3* | osf4* | osf5*)
> -  version_type=osf
> -  need_lib_prefix=no
> -  need_version=no
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
> -  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
> -  ;;
> -
> -rdos*)
> -  dynamic_linker=no
> -  ;;
> -
> -solaris*)
> -  version_type=linux
> -  need_lib_prefix=no
> -  need_version=no
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  shlibpath_overrides_runpath=yes
> -  hardcode_into_libs=yes
> -  # ldd complains unless libraries are executable
> -  postinstall_cmds='chmod +x $lib'
> -  ;;
> -
> -sunos4*)
> -  version_type=sunos
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
> -  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  shlibpath_overrides_runpath=yes
> -  if test "$with_gnu_ld" = yes; then
> -    need_lib_prefix=no
> -  fi
> -  need_version=yes
> -  ;;
> -
> -sysv4 | sysv4.3*)
> -  version_type=linux
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  case $host_vendor in
> -    sni)
> -      shlibpath_overrides_runpath=no
> -      need_lib_prefix=no
> -      runpath_var=LD_RUN_PATH
> -      ;;
> -    siemens)
> -      need_lib_prefix=no
> -      ;;
> -    motorola)
> -      need_lib_prefix=no
> -      need_version=no
> -      shlibpath_overrides_runpath=no
> -      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
> -      ;;
> -  esac
> -  ;;
> -
> -sysv4*MP*)
> -  if test -d /usr/nec ;then
> -    version_type=linux
> -    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
> -    soname_spec='$libname${shared_ext}.$major'
> -    shlibpath_var=LD_LIBRARY_PATH
> -  fi
> -  ;;
> -
> -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
> -  version_type=freebsd-elf
> -  need_lib_prefix=no
> -  need_version=no
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  shlibpath_overrides_runpath=yes
> -  hardcode_into_libs=yes
> -  if test "$with_gnu_ld" = yes; then
> -    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
> -  else
> -    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
> -    case $host_os in
> -      sco3.2v5*)
> -        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
> -	;;
> -    esac
> -  fi
> -  sys_lib_dlsearch_path_spec='/usr/lib'
> -  ;;
> -
> -tpf*)
> -  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
> -  version_type=linux
> -  need_lib_prefix=no
> -  need_version=no
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  shlibpath_overrides_runpath=no
> -  hardcode_into_libs=yes
> -  ;;
> -
> -uts4*)
> -  version_type=linux
> -  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
> -  soname_spec='${libname}${release}${shared_ext}$major'
> -  shlibpath_var=LD_LIBRARY_PATH
> -  ;;
> -
> -*)
> -  dynamic_linker=no
> -  ;;
> -esac
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
> -$as_echo "$dynamic_linker" >&6; }
> -test "$dynamic_linker" = no && can_build_shared=no
> -
> -variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
> -if test "$GCC" = yes; then
> -  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
> -fi
> -
> -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
> -  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
> -fi
> -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
> -  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
> -fi
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
> -$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
> -hardcode_action=
> -if test -n "$hardcode_libdir_flag_spec" ||
> -   test -n "$runpath_var" ||
> -   test "X$hardcode_automatic" = "Xyes" ; then
> -
> -  # We can hardcode non-existent directories.
> -  if test "$hardcode_direct" != no &&
> -     # If the only mechanism to avoid hardcoding is shlibpath_var, we
> -     # have to relink, otherwise we might link with an installed library
> -     # when we should be linking with a yet-to-be-installed one
> -     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
> -     test "$hardcode_minus_L" != no; then
> -    # Linking always hardcodes the temporary library directory.
> -    hardcode_action=relink
> -  else
> -    # We can link without hardcoding, and we can hardcode nonexisting dirs.
> -    hardcode_action=immediate
> -  fi
> -else
> -  # We cannot hardcode anything, or else we can only hardcode existing
> -  # directories.
> -  hardcode_action=unsupported
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
> -$as_echo "$hardcode_action" >&6; }
> -
> -if test "$hardcode_action" = relink ||
> -   test "$inherit_rpath" = yes; then
> -  # Fast installation is not supported
> -  enable_fast_install=no
> -elif test "$shlibpath_overrides_runpath" = yes ||
> -     test "$enable_shared" = no; then
> -  # Fast installation is not necessary
> -  enable_fast_install=needless
> -fi
> -
> -
> -
> -
> -
> -
> -  if test "x$enable_dlopen" != xyes; then
> -  enable_dlopen=unknown
> -  enable_dlopen_self=unknown
> -  enable_dlopen_self_static=unknown
> -else
> -  lt_cv_dlopen=no
> -  lt_cv_dlopen_libs=
> -
> -  case $host_os in
> -  beos*)
> -    lt_cv_dlopen="load_add_on"
> -    lt_cv_dlopen_libs=
> -    lt_cv_dlopen_self=yes
> -    ;;
> -
> -  mingw* | pw32* | cegcc*)
> -    lt_cv_dlopen="LoadLibrary"
> -    lt_cv_dlopen_libs=
> -    ;;
> -
> -  cygwin*)
> -    lt_cv_dlopen="dlopen"
> -    lt_cv_dlopen_libs=
> -    ;;
> -
> -  darwin*)
> -  # if libdl is installed we need to link against it
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
> -$as_echo_n "checking for dlopen in -ldl... " >&6; }
> -if ${ac_cv_lib_dl_dlopen+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  ac_check_lib_save_LIBS=$LIBS
> -LIBS="-ldl  $LIBS"
> -cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -/* Override any GCC internal prototype to avoid an error.
> -   Use char because int might match the return type of a GCC
> -   builtin and then its argument prototype would still apply.  */
> -#ifdef __cplusplus
> -extern "C"
> -#endif
> -char dlopen ();
> -int
> -main ()
> -{
> -return dlopen ();
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -  ac_cv_lib_dl_dlopen=yes
> -else
> -  ac_cv_lib_dl_dlopen=no
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -LIBS=$ac_check_lib_save_LIBS
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
> -$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
> -if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
> -  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
> -else
> -
> -    lt_cv_dlopen="dyld"
> -    lt_cv_dlopen_libs=
> -    lt_cv_dlopen_self=yes
> -
> -fi
> -
> -    ;;
> -
> -  *)
> -    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
> -if test "x$ac_cv_func_shl_load" = xyes; then :
> -  lt_cv_dlopen="shl_load"
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
> -$as_echo_n "checking for shl_load in -ldld... " >&6; }
> -if ${ac_cv_lib_dld_shl_load+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  ac_check_lib_save_LIBS=$LIBS
> -LIBS="-ldld  $LIBS"
> -cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -/* Override any GCC internal prototype to avoid an error.
> -   Use char because int might match the return type of a GCC
> -   builtin and then its argument prototype would still apply.  */
> -#ifdef __cplusplus
> -extern "C"
> -#endif
> -char shl_load ();
> -int
> -main ()
> -{
> -return shl_load ();
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -  ac_cv_lib_dld_shl_load=yes
> -else
> -  ac_cv_lib_dld_shl_load=no
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -LIBS=$ac_check_lib_save_LIBS
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
> -$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
> -if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
> -  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
> -else
> -  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
> -if test "x$ac_cv_func_dlopen" = xyes; then :
> -  lt_cv_dlopen="dlopen"
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
> -$as_echo_n "checking for dlopen in -ldl... " >&6; }
> -if ${ac_cv_lib_dl_dlopen+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  ac_check_lib_save_LIBS=$LIBS
> -LIBS="-ldl  $LIBS"
> -cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -/* Override any GCC internal prototype to avoid an error.
> -   Use char because int might match the return type of a GCC
> -   builtin and then its argument prototype would still apply.  */
> -#ifdef __cplusplus
> -extern "C"
> -#endif
> -char dlopen ();
> -int
> -main ()
> -{
> -return dlopen ();
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -  ac_cv_lib_dl_dlopen=yes
> -else
> -  ac_cv_lib_dl_dlopen=no
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -LIBS=$ac_check_lib_save_LIBS
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
> -$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
> -if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
> -  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
> -$as_echo_n "checking for dlopen in -lsvld... " >&6; }
> -if ${ac_cv_lib_svld_dlopen+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  ac_check_lib_save_LIBS=$LIBS
> -LIBS="-lsvld  $LIBS"
> -cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -/* Override any GCC internal prototype to avoid an error.
> -   Use char because int might match the return type of a GCC
> -   builtin and then its argument prototype would still apply.  */
> -#ifdef __cplusplus
> -extern "C"
> -#endif
> -char dlopen ();
> -int
> -main ()
> -{
> -return dlopen ();
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -  ac_cv_lib_svld_dlopen=yes
> -else
> -  ac_cv_lib_svld_dlopen=no
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -LIBS=$ac_check_lib_save_LIBS
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
> -$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
> -if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
> -  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
> -else
> -  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
> -$as_echo_n "checking for dld_link in -ldld... " >&6; }
> -if ${ac_cv_lib_dld_dld_link+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  ac_check_lib_save_LIBS=$LIBS
> -LIBS="-ldld  $LIBS"
> -cat confdefs.h - <<_ACEOF >conftest.$ac_ext
> -/* end confdefs.h.  */
> -
> -/* Override any GCC internal prototype to avoid an error.
> -   Use char because int might match the return type of a GCC
> -   builtin and then its argument prototype would still apply.  */
> -#ifdef __cplusplus
> -extern "C"
> -#endif
> -char dld_link ();
> -int
> -main ()
> -{
> -return dld_link ();
> -  ;
> -  return 0;
> -}
> -_ACEOF
> -if ac_fn_c_try_link "$LINENO"; then :
> -  ac_cv_lib_dld_dld_link=yes
> -else
> -  ac_cv_lib_dld_dld_link=no
> -fi
> -rm -f core conftest.err conftest.$ac_objext \
> -    conftest$ac_exeext conftest.$ac_ext
> -LIBS=$ac_check_lib_save_LIBS
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
> -$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
> -if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
> -  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
> -fi
> -
> -
> -fi
> -
> -
> -fi
> -
> -
> -fi
> -
> -
> -fi
> -
> -
> -fi
> -
> -    ;;
> -  esac
> -
> -  if test "x$lt_cv_dlopen" != xno; then
> -    enable_dlopen=yes
> -  else
> -    enable_dlopen=no
> -  fi
> -
> -  case $lt_cv_dlopen in
> -  dlopen)
> -    save_CPPFLAGS="$CPPFLAGS"
> -    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
> -
> -    save_LDFLAGS="$LDFLAGS"
> -    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
> -
> -    save_LIBS="$LIBS"
> -    LIBS="$lt_cv_dlopen_libs $LIBS"
> -
> -    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
> -$as_echo_n "checking whether a program can dlopen itself... " >&6; }
> -if ${lt_cv_dlopen_self+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  	  if test "$cross_compiling" = yes; then :
> -  lt_cv_dlopen_self=cross
> -else
> -  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> -  lt_status=$lt_dlunknown
> -  cat > conftest.$ac_ext <<_LT_EOF
> -#line $LINENO "configure"
> -#include "confdefs.h"
> -
> -#if HAVE_DLFCN_H
> -#include <dlfcn.h>
> -#endif
> -
> -#include <stdio.h>
> -
> -#ifdef RTLD_GLOBAL
> -#  define LT_DLGLOBAL		RTLD_GLOBAL
> -#else
> -#  ifdef DL_GLOBAL
> -#    define LT_DLGLOBAL		DL_GLOBAL
> -#  else
> -#    define LT_DLGLOBAL		0
> -#  endif
> -#endif
> -
> -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
> -   find out it does not work in some platform. */
> -#ifndef LT_DLLAZY_OR_NOW
> -#  ifdef RTLD_LAZY
> -#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
> -#  else
> -#    ifdef DL_LAZY
> -#      define LT_DLLAZY_OR_NOW		DL_LAZY
> -#    else
> -#      ifdef RTLD_NOW
> -#        define LT_DLLAZY_OR_NOW	RTLD_NOW
> -#      else
> -#        ifdef DL_NOW
> -#          define LT_DLLAZY_OR_NOW	DL_NOW
> -#        else
> -#          define LT_DLLAZY_OR_NOW	0
> -#        endif
> -#      endif
> -#    endif
> -#  endif
> -#endif
> -
> -/* When -fvisbility=hidden is used, assume the code has been annotated
> -   correspondingly for the symbols needed.  */
> -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
> -int fnord () __attribute__((visibility("default")));
> -#endif
> -
> -int fnord () { return 42; }
> -int main ()
> -{
> -  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
> -  int status = $lt_dlunknown;
> -
> -  if (self)
> -    {
> -      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
> -      else
> -        {
> -	  if (dlsym( self,"_fnord"))  status = $lt_dlneed_uscore;
> -          else puts (dlerror ());
> -	}
> -      /* dlclose (self); */
> -    }
> -  else
> -    puts (dlerror ());
> -
> -  return status;
> -}
> -_LT_EOF
> -  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
> -  (eval $ac_link) 2>&5
> -  ac_status=$?
> -  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
> -  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
> -    (./conftest; exit; ) >&5 2>/dev/null
> -    lt_status=$?
> -    case x$lt_status in
> -      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
> -      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
> -      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
> -    esac
> -  else :
> -    # compilation failed
> -    lt_cv_dlopen_self=no
> -  fi
> -fi
> -rm -fr conftest*
> -
> -
> -fi
> -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
> -$as_echo "$lt_cv_dlopen_self" >&6; }
> -
> -    if test "x$lt_cv_dlopen_self" = xyes; then
> -      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
> -      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
> -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
> -if ${lt_cv_dlopen_self_static+:} false; then :
> -  $as_echo_n "(cached) " >&6
> -else
> -  	  if test "$cross_compiling" = yes; then :
> -  lt_cv_dlopen_self_static=cross
> -else
> -  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> -  lt_status=$lt_dlunknown
> -  cat > conftest.$ac_ext <<_LT_EOF
> -#line $LINENO "configure"
> -#include "confdefs.h"
> -
> -#if HAVE_DLFCN_H
> -#include <dlfcn.h>
> -#endif
> -
> -#include <stdio.h>
> -
> -#ifdef RTLD_GLOBAL
> -#  define LT_DLGLOBAL		RTLD_GLOBAL
> -#else
> -#  ifdef DL_GLOBAL
> -#    define LT_DLGLOBAL		DL_GLOBAL
> -#  else
> -#    define LT_DLGLOBAL		0
> -#  endif
> -#endif
> -
> -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
> -   find out it does not work in some platform. */
> -#ifndef LT_DLLAZY_OR_NOW
> -#  ifdef RTLD_LAZY
> -#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
> -#  else
> -#    ifdef DL_LAZY
> -#      define LT_DLLAZY_OR_NOW		DL_LAZY
> -#    else
> -#      ifdef RTLD_NOW
> -#        define LT_DLLAZY_OR_NOW	RTLD_NOW
> -#      else
> -#        ifdef DL_NOW
> -#          define LT_DLLAZY_OR_NOW	DL_NOW
> -#        else
> -#          define LT_DLLAZY_OR_NOW	0
> -#        endif
> -#      endif
> -#    endif
> -#  endif
> -#endif
> -
> -/* When -fvisbility=hidden is used, assume the code has been annotated
> -   correspondingly for the symbols needed.  */
> -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
> -int fnord () __attribute__((visibility("default")));
> -#endif
> -
> -int fnord () { r