@@ -4079,9 +4079,9 @@ void bdrv_iostatus_enable(BlockDriverState *bs)
bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
{
return (bs->iostatus_enabled &&
- (bs->on_write_error == BLOCK_ERR_STOP_ENOSPC ||
- bs->on_write_error == BLOCK_ERR_STOP_ANY ||
- bs->on_read_error == BLOCK_ERR_STOP_ANY));
+ (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
+ bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
+ bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
}
void bdrv_iostatus_disable(BlockDriverState *bs)
@@ -89,11 +89,6 @@ typedef struct BlockDevOps {
#define BDRV_SECTOR_MASK ~(BDRV_SECTOR_SIZE - 1)
typedef enum {
- BLOCK_ERR_REPORT, BLOCK_ERR_IGNORE, BLOCK_ERR_STOP_ENOSPC,
- BLOCK_ERR_STOP_ANY
-} BlockdevOnError;
-
-typedef enum {
BDRV_ACTION_REPORT, BDRV_ACTION_IGNORE, BDRV_ACTION_STOP
} BlockErrorAction;
@@ -241,13 +241,13 @@ static void drive_put_ref_bh_schedule(DriveInfo *dinfo)
static int parse_block_error_action(const char *buf, int is_read)
{
if (!strcmp(buf, "ignore")) {
- return BLOCK_ERR_IGNORE;
+ return BLOCKDEV_ON_ERROR_IGNORE;
} else if (!is_read && !strcmp(buf, "enospc")) {
- return BLOCK_ERR_STOP_ENOSPC;
+ return BLOCKDEV_ON_ERROR_ENOSPC;
} else if (!strcmp(buf, "stop")) {
- return BLOCK_ERR_STOP_ANY;
+ return BLOCKDEV_ON_ERROR_STOP;
} else if (!strcmp(buf, "report")) {
- return BLOCK_ERR_REPORT;
+ return BLOCKDEV_ON_ERROR_REPORT;
} else {
error_report("'%s' invalid %s error action",
buf, is_read ? "read" : "write");
@@ -432,7 +432,7 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
return NULL;
}
- on_write_error = BLOCK_ERR_STOP_ENOSPC;
+ on_write_error = BLOCKDEV_ON_ERROR_ENOSPC;
if ((buf = qemu_opt_get(opts, "werror")) != NULL) {
if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO && type != IF_NONE) {
error_report("werror is not supported by this bus type");
@@ -445,7 +445,7 @@ DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi)
}
}
- on_read_error = BLOCK_ERR_REPORT;
+ on_read_error = BLOCKDEV_ON_ERROR_REPORT;
if ((buf = qemu_opt_get(opts, "rerror")) != NULL) {
if (type != IF_IDE && type != IF_VIRTIO && type != IF_SCSI && type != IF_NONE) {
error_report("rerror is not supported by this bus type");
@@ -1869,11 +1869,11 @@ static int fdctrl_connect_drives(FDCtrl *fdctrl)
drive->fdctrl = fdctrl;
if (drive->bs) {
- if (bdrv_get_on_error(drive->bs, 0) != BLOCK_ERR_STOP_ENOSPC) {
+ if (bdrv_get_on_error(drive->bs, 0) != BLOCKDEV_ON_ERROR_ENOSPC) {
error_report("fdc doesn't support drive option werror");
return -1;
}
- if (bdrv_get_on_error(drive->bs, 1) != BLOCK_ERR_REPORT) {
+ if (bdrv_get_on_error(drive->bs, 1) != BLOCKDEV_ON_ERROR_REPORT) {
error_report("fdc doesn't support drive option rerror");
return -1;
}
@@ -560,13 +560,13 @@ static int ide_handle_rw_error(IDEState *s, int error, int op)
int is_read = (op & BM_STATUS_RETRY_READ);
BlockdevOnError action = bdrv_get_on_error(s->bs, is_read);
- if (action == BLOCK_ERR_IGNORE) {
+ if (action == BLOCKDEV_ON_ERROR_IGNORE) {
bdrv_emit_qmp_error_event(s->bs, BDRV_ACTION_IGNORE, is_read);
return 0;
}
- if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
- || action == BLOCK_ERR_STOP_ANY) {
+ if ((error == ENOSPC && action == BLOCKDEV_ON_ERROR_ENOSPC)
+ || action == BLOCKDEV_ON_ERROR_STOP) {
s->bus->dma->ops->set_unit(s->bus->dma, s->unit);
s->bus->error_status = op;
bdrv_emit_qmp_error_event(s->bs, BDRV_ACTION_STOP, is_read);
@@ -392,13 +392,13 @@ static int scsi_handle_rw_error(SCSIDiskReq *r, int error)
SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
BlockdevOnError action = bdrv_get_on_error(s->qdev.conf.bs, is_read);
- if (action == BLOCK_ERR_IGNORE) {
+ if (action == BLOCKDEV_ON_ERROR_IGNORE) {
bdrv_emit_qmp_error_event(s->qdev.conf.bs, BDRV_ACTION_IGNORE, is_read);
return 0;
}
- if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
- || action == BLOCK_ERR_STOP_ANY) {
+ if ((error == ENOSPC && action == BLOCKDEV_ON_ERROR_ENOSPC)
+ || action == BLOCKDEV_ON_ERROR_STOP) {
bdrv_emit_qmp_error_event(s->qdev.conf.bs, BDRV_ACTION_STOP, is_read);
vm_stop(RUN_STATE_IO_ERROR);
@@ -406,11 +406,11 @@ static int scsi_generic_initfn(SCSIDevice *s)
return -1;
}
- if (bdrv_get_on_error(s->conf.bs, 0) != BLOCK_ERR_STOP_ENOSPC) {
+ if (bdrv_get_on_error(s->conf.bs, 0) != BLOCKDEV_ON_ERROR_ENOSPC) {
error_report("Device doesn't support drive option werror");
return -1;
}
- if (bdrv_get_on_error(s->conf.bs, 1) != BLOCK_ERR_REPORT) {
+ if (bdrv_get_on_error(s->conf.bs, 1) != BLOCKDEV_ON_ERROR_REPORT) {
error_report("Device doesn't support drive option rerror");
return -1;
}
@@ -68,13 +68,13 @@ static int virtio_blk_handle_rw_error(VirtIOBlockReq *req, int error,
BlockdevOnError action = bdrv_get_on_error(req->dev->bs, is_read);
VirtIOBlock *s = req->dev;
- if (action == BLOCK_ERR_IGNORE) {
+ if (action == BLOCKDEV_ON_ERROR_IGNORE) {
bdrv_emit_qmp_error_event(s->bs, BDRV_ACTION_IGNORE, is_read);
return 0;
}
- if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
- || action == BLOCK_ERR_STOP_ANY) {
+ if ((error == ENOSPC && action == BLOCKDEV_ON_ERROR_ENOSPC)
+ || action == BLOCKDEV_ON_ERROR_STOP) {
req->next = s->rq;
s->rq = req;
bdrv_emit_qmp_error_event(s->bs, BDRV_ACTION_STOP, is_read);
@@ -896,6 +896,29 @@
{ 'command': 'query-pci', 'returns': ['PciInfo'] }
##
+# @BlockdevOnError:
+#
+# An enumeration of possible behaviors for errors on I/O operations.
+# The exact meaning depends on whether the I/O was initiated by a guest
+# or by a block job
+#
+# @report: for guest operations, report the error to the guest;
+# for jobs, cancel the job
+#
+# @ignore: ignore the error, only report a QMP event (BLOCK_IO_ERROR
+# or BLOCK_JOB_ERROR)
+#
+# @stop: for guest operations, stop the virtual machine;
+# for jobs, pause the job
+#
+# @enospc: same as @stop on ENOSPC, same as @report otherwise.
+#
+# Since: 1.2
+##
+{ 'enum': 'BlockdevOnError',
+ 'data': ['report', 'ignore', 'enospc', 'stop'] }
+
+##
# @BlockJobInfo:
#
# Information about a long-running block device operation.
This will let block-stream reuse the enum. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> --- block.c | 6 +++--- block.h | 5 ----- blockdev.c | 12 ++++++------ hw/fdc.c | 4 ++-- hw/ide/core.c | 6 +++--- hw/scsi-disk.c | 6 +++--- hw/scsi-generic.c | 4 ++-- hw/virtio-blk.c | 6 +++--- qapi-schema.json | 23 +++++++++++++++++++++++ 9 files changed, 45 insertions(+), 27 deletions(-)