Patchwork [U-Boot] Please pull u-boot-staging.git/sr@denx.de

login
register
mail settings
Submitter Stefan Roese
Date June 5, 2012, 6:58 a.m.
Message ID <201206050858.26877.sr@denx.de>
Download mbox
Permalink /patch/163031/
State Superseded
Delegated to: Albert ARIBAUD
Headers show

Pull-request

git://www.denx.de/git/u-boot-staging.git sr@denx.de

Comments

Stefan Roese - June 5, 2012, 6:58 a.m.
Hi Albert!

I have collected all of the remaining ARM/SPEAr patches in my
staging repository. There are some dependencies between the
patches, so I also added the NOR, NAND and ethernet patches
in this pull request. The patches have the Acked-by from the
corresponding custodians (Joe for networking, Scott for NAND,
myself for NOR).

Since most of the patches are ARM/SPEAr platform related, I'm
pushing the patchset through your ARM repository. Please pull
and push to Wolfgang.

Thanks,
Stefan


The following changes since commit 4398d55991eb3c2484a2a8e991d701e5d7a64874:

  net: sh-eth: Add support Gigabit of SH7734 (2012-05-23 17:53:09 -0500)

are available in the git repository at:

  git://www.denx.de/git/u-boot-staging.git sr@denx.de

for you to fetch changes up to e94b7cb06a246532aba7af9e0f2040d4facba5db:

  MTD: SPEAr SMI: Add write support for length < 4 bytes (2012-06-05 08:42:50 +0200)

----------------------------------------------------------------
Amit Virdi (10):
      st_smi: Return error in case TFF is not set
      st_smi: Change SMI timeout values
      st_smi: Enhance the error handling
      st_smi: Change timeout loop implementation
      SPEAr: Fix ARM relocation support
      SPEAr: Eliminate dependency on Xloader table
      SPEAr: Initialize SNOR in early_board_init_f
      SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access
      cleanup/SPEAr: Remove unnecessary parenthesis
      cleanup/SPEAr: Define configuration flags more elegantly

Armando Visconti (4):
      st_smi: Removed no needed dependency on ST_M25Pxx_ID
      st_smi: Change the flash probing method
      st_smi: Fix bug in flash_print_info()
      st_smi: Fixed page size for Winbond W25Q128FV flash

Shiraz Hashim (5):
      st_smi: Move status register read before modifying ctrl register
      SPEAr: Enable autoneg for ethernet
      SPEAr: Enable dcache for fast file transfer
      SPEAr: explicitly select clk src for UART
      SPEAr: Correct SoC ID offset in misc configuration space

Simon Glass (1):
      arm: Don't use printf() in SPL builds

Stefan Roese (10):
      net: Multiple updates/enhancements to designware.c
      GPIO: Add SPEAr GPIO driver
      SPL: common/Makefile: Add image.c to SPL build
      SPL: lib/Makefile: Add crc32.c to SPL build
      SPL: ARM: spear: Remove some objects from SPL build
      Makefile: Add u-boot.spr build target (SPEAr)
      SPL: ARM: spear: Add SPL support for SPEAr600 platform
      rtc/m41t62: Add support for M41T82 with HT (Halt Update)
      i2c: designware_i2c.c: Add support for the "i2c probe" command
      MTD: SPEAr SMI: Add write support for length < 4 bytes

Vipin KUMAR (14):
      mtd/NAND: Add FSMC driver support
      SPEAr: Configure FSMC driver for NAND interface
      mtd/NAND: Remove obsolete SPEAr specific NAND drivers
      st_smi: Add support for SPEAr SMI driver
      st_smi: Read status until timeout happens
      SPEAr: Place ethaddr write and read within CONFIG_CMD_NET
      SPEAr: Configure network support for spear SoCs
      SPEAr: Add macb driver support for spear310 and spear320
      SPEAr: Add basic arch related support for SPEAr SoCs
      SPEAr: Add configuration options for spear3xx and spear6xx boards
      SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)
      SPEAr: Change the default environment variables
      SPEAr: Enable usb device high speed support
      SPEAr: Enable udc and usb-console support only for usbtty configuration

Vipin Kumar (6):
      st_smi: Fix smi read status
      SPEAr: Add interface information in initialization
      SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION
      SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE
      SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro
      SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb

 Makefile                                           |   17 +
 arch/arm/cpu/arm926ejs/spear/Makefile              |   25 +-
 arch/arm/cpu/arm926ejs/spear/cpu.c                 |   87 ++++
 arch/arm/cpu/arm926ejs/spear/spear600.c            |  236 ++++++++++
 arch/arm/cpu/arm926ejs/spear/spl.c                 |  282 ++++++++++++
 arch/arm/cpu/arm926ejs/spear/spl_boot.c            |  197 ++++++++
 .../spear/spr600_mt47h128m8_3_266_cl5_async.c      |  130 ++++++
 .../spear/spr600_mt47h32m16_333_cl5_psync.c        |  135 ++++++
 .../spear/spr600_mt47h32m16_37e_166_cl4_sync.c     |  130 ++++++
 .../spear/spr600_mt47h64m16_3_333_cl5_psync.c      |  144 ++++++
 arch/arm/cpu/arm926ejs/spear/start.S               |  122 +++++
 arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds        |   87 ++++
 arch/arm/include/asm/arch-spear/clk.h              |   27 ++
 arch/arm/include/asm/arch-spear/gpio.h             |   40 ++
 arch/arm/include/asm/arch-spear/hardware.h         |   63 ++-
 arch/arm/include/asm/arch-spear/spr_defs.h         |   23 +
 arch/arm/include/asm/arch-spear/spr_gpt.h          |    4 +-
 arch/arm/include/asm/arch-spear/spr_misc.h         |  147 +++++-
 arch/arm/include/asm/arch-spear/spr_nand.h         |   57 ---
 arch/arm/include/asm/arch-spear/spr_ssp.h          |   45 ++
 arch/arm/include/asm/arch-spear/spr_syscntl.h      |   14 +
 .../arm/include/asm/arch-spear/spr_xloader_table.h |   67 ---
 arch/arm/lib/eabi_compat.c                         |    3 +-
 board/spear/common/Makefile                        |    2 +
 board/spear/common/spr_misc.c                      |  102 ++--
 board/spear/spear300/config.mk                     |   39 --
 board/spear/spear300/spear300.c                    |   27 +-
 board/spear/spear310/config.mk                     |   44 --
 board/spear/spear310/spear310.c                    |   44 +-
 board/spear/spear320/config.mk                     |   44 --
 board/spear/spear320/spear320.c                    |   43 +-
 board/spear/spear600/Makefile                      |    2 +
 board/spear/spear600/config.mk                     |   39 --
 board/spear/spear600/spear600.c                    |   30 +-
 boards.cfg                                         |   24 +-
 common/Makefile                                    |    2 +-
 config.mk                                          |    4 +
 doc/README.spear                                   |   54 ++-
 drivers/gpio/Makefile                              |    1 +
 drivers/gpio/spear_gpio.c                          |  102 ++++
 drivers/i2c/designware_i2c.c                       |   16 +-
 drivers/mtd/Makefile                               |    2 +-
 drivers/mtd/nand/Makefile                          |    1 +
 drivers/mtd/nand/fsmc_nand.c                       |  486 ++++++++++++++++++++
 drivers/mtd/nand/spr_nand.c                        |  124 -----
 drivers/mtd/{spr_smi.c => st_smi.c}                |  255 ++++++----
 drivers/net/designware.c                           |  126 +++--
 drivers/net/designware.h                           |    2 +
 drivers/rtc/m41t62.c                               |   10 +-
 include/configs/spear-common.h                     |   94 ++--
 include/configs/{spear3xx.h => spear3xx_evb.h}     |   62 ++-
 include/configs/{spear6xx.h => spear6xx_evb.h}     |   20 +-
 include/linux/mtd/fsmc_nand.h                      |  101 ++++
 .../spr_smi.h => include/linux/mtd/st_smi.h        |   10 +-
 include/netdev.h                                   |    2 +-
 lib/Makefile                                       |    2 +-
 56 files changed, 3229 insertions(+), 769 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
 create mode 100644 arch/arm/cpu/arm926ejs/spear/spear600.c
 create mode 100644 arch/arm/cpu/arm926ejs/spear/spl.c
 create mode 100644 arch/arm/cpu/arm926ejs/spear/spl_boot.c
 create mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c
 create mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c
 create mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c
 create mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c
 create mode 100644 arch/arm/cpu/arm926ejs/spear/start.S
 create mode 100644 arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
 create mode 100644 arch/arm/include/asm/arch-spear/clk.h
 create mode 100644 arch/arm/include/asm/arch-spear/gpio.h
 delete mode 100644 arch/arm/include/asm/arch-spear/spr_nand.h
 create mode 100644 arch/arm/include/asm/arch-spear/spr_ssp.h
 delete mode 100644 arch/arm/include/asm/arch-spear/spr_xloader_table.h
 delete mode 100644 board/spear/spear300/config.mk
 delete mode 100644 board/spear/spear310/config.mk
 delete mode 100644 board/spear/spear320/config.mk
 delete mode 100644 board/spear/spear600/config.mk
 create mode 100644 drivers/gpio/spear_gpio.c
 create mode 100644 drivers/mtd/nand/fsmc_nand.c
 delete mode 100644 drivers/mtd/nand/spr_nand.c
 rename drivers/mtd/{spr_smi.c => st_smi.c} (62%)
 rename include/configs/{spear3xx.h => spear3xx_evb.h} (72%)
 rename include/configs/{spear6xx.h => spear6xx_evb.h} (74%)
 create mode 100644 include/linux/mtd/fsmc_nand.h
 rename arch/arm/include/asm/arch-spear/spr_smi.h => include/linux/mtd/st_smi.h (95%)
Stefan Roese - June 22, 2012, 6:01 a.m.
Hi Albert,

as you requested, here a short reminder...

On Tuesday 05 June 2012 08:58:26 Stefan Roese wrote:
> Hi Albert!
> 
> I have collected all of the remaining ARM/SPEAr patches in my
> staging repository. There are some dependencies between the
> patches, so I also added the NOR, NAND and ethernet patches
> in this pull request. The patches have the Acked-by from the
> corresponding custodians (Joe for networking, Scott for NAND,
> myself for NOR).
> 
> Since most of the patches are ARM/SPEAr platform related, I'm
> pushing the patchset through your ARM repository. Please pull
> and push to Wolfgang.
> 
> Thanks,
> Stefan
> 
> 
> The following changes since commit
> 4398d55991eb3c2484a2a8e991d701e5d7a64874:
> 
>   net: sh-eth: Add support Gigabit of SH7734 (2012-05-23 17:53:09 -0500)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-staging.git sr@denx.de
> 
> for you to fetch changes up to e94b7cb06a246532aba7af9e0f2040d4facba5db:
> 
>   MTD: SPEAr SMI: Add write support for length < 4 bytes (2012-06-05
> 08:42:50 +0200)
> 
> ----------------------------------------------------------------
> Amit Virdi (10):
>       st_smi: Return error in case TFF is not set
>       st_smi: Change SMI timeout values
>       st_smi: Enhance the error handling
>       st_smi: Change timeout loop implementation
>       SPEAr: Fix ARM relocation support
>       SPEAr: Eliminate dependency on Xloader table
>       SPEAr: Initialize SNOR in early_board_init_f
>       SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access
>       cleanup/SPEAr: Remove unnecessary parenthesis
>       cleanup/SPEAr: Define configuration flags more elegantly
> 
> Armando Visconti (4):
>       st_smi: Removed no needed dependency on ST_M25Pxx_ID
>       st_smi: Change the flash probing method
>       st_smi: Fix bug in flash_print_info()
>       st_smi: Fixed page size for Winbond W25Q128FV flash
> 
> Shiraz Hashim (5):
>       st_smi: Move status register read before modifying ctrl register
>       SPEAr: Enable autoneg for ethernet
>       SPEAr: Enable dcache for fast file transfer
>       SPEAr: explicitly select clk src for UART
>       SPEAr: Correct SoC ID offset in misc configuration space
> 
> Simon Glass (1):
>       arm: Don't use printf() in SPL builds
> 
> Stefan Roese (10):
>       net: Multiple updates/enhancements to designware.c
>       GPIO: Add SPEAr GPIO driver
>       SPL: common/Makefile: Add image.c to SPL build
>       SPL: lib/Makefile: Add crc32.c to SPL build
>       SPL: ARM: spear: Remove some objects from SPL build
>       Makefile: Add u-boot.spr build target (SPEAr)
>       SPL: ARM: spear: Add SPL support for SPEAr600 platform
>       rtc/m41t62: Add support for M41T82 with HT (Halt Update)
>       i2c: designware_i2c.c: Add support for the "i2c probe" command
>       MTD: SPEAr SMI: Add write support for length < 4 bytes
> 
> Vipin KUMAR (14):
>       mtd/NAND: Add FSMC driver support
>       SPEAr: Configure FSMC driver for NAND interface
>       mtd/NAND: Remove obsolete SPEAr specific NAND drivers
>       st_smi: Add support for SPEAr SMI driver
>       st_smi: Read status until timeout happens
>       SPEAr: Place ethaddr write and read within CONFIG_CMD_NET
>       SPEAr: Configure network support for spear SoCs
>       SPEAr: Add macb driver support for spear310 and spear320
>       SPEAr: Add basic arch related support for SPEAr SoCs
>       SPEAr: Add configuration options for spear3xx and spear6xx boards
>       SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)
>       SPEAr: Change the default environment variables
>       SPEAr: Enable usb device high speed support
>       SPEAr: Enable udc and usb-console support only for usbtty
> configuration
> 
> Vipin Kumar (6):
>       st_smi: Fix smi read status
>       SPEAr: Add interface information in initialization
>       SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION
>       SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE
>       SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro
>       SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and evb
> 
>  Makefile                                           |   17 +
>  arch/arm/cpu/arm926ejs/spear/Makefile              |   25 +-
>  arch/arm/cpu/arm926ejs/spear/cpu.c                 |   87 ++++
>  arch/arm/cpu/arm926ejs/spear/spear600.c            |  236 ++++++++++
>  arch/arm/cpu/arm926ejs/spear/spl.c                 |  282 ++++++++++++
>  arch/arm/cpu/arm926ejs/spear/spl_boot.c            |  197 ++++++++
>  .../spear/spr600_mt47h128m8_3_266_cl5_async.c      |  130 ++++++
>  .../spear/spr600_mt47h32m16_333_cl5_psync.c        |  135 ++++++
>  .../spear/spr600_mt47h32m16_37e_166_cl4_sync.c     |  130 ++++++
>  .../spear/spr600_mt47h64m16_3_333_cl5_psync.c      |  144 ++++++
>  arch/arm/cpu/arm926ejs/spear/start.S               |  122 +++++
>  arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds        |   87 ++++
>  arch/arm/include/asm/arch-spear/clk.h              |   27 ++
>  arch/arm/include/asm/arch-spear/gpio.h             |   40 ++
>  arch/arm/include/asm/arch-spear/hardware.h         |   63 ++-
>  arch/arm/include/asm/arch-spear/spr_defs.h         |   23 +
>  arch/arm/include/asm/arch-spear/spr_gpt.h          |    4 +-
>  arch/arm/include/asm/arch-spear/spr_misc.h         |  147 +++++-
>  arch/arm/include/asm/arch-spear/spr_nand.h         |   57 ---
>  arch/arm/include/asm/arch-spear/spr_ssp.h          |   45 ++
>  arch/arm/include/asm/arch-spear/spr_syscntl.h      |   14 +
>  .../arm/include/asm/arch-spear/spr_xloader_table.h |   67 ---
>  arch/arm/lib/eabi_compat.c                         |    3 +-
>  board/spear/common/Makefile                        |    2 +
>  board/spear/common/spr_misc.c                      |  102 ++--
>  board/spear/spear300/config.mk                     |   39 --
>  board/spear/spear300/spear300.c                    |   27 +-
>  board/spear/spear310/config.mk                     |   44 --
>  board/spear/spear310/spear310.c                    |   44 +-
>  board/spear/spear320/config.mk                     |   44 --
>  board/spear/spear320/spear320.c                    |   43 +-
>  board/spear/spear600/Makefile                      |    2 +
>  board/spear/spear600/config.mk                     |   39 --
>  board/spear/spear600/spear600.c                    |   30 +-
>  boards.cfg                                         |   24 +-
>  common/Makefile                                    |    2 +-
>  config.mk                                          |    4 +
>  doc/README.spear                                   |   54 ++-
>  drivers/gpio/Makefile                              |    1 +
>  drivers/gpio/spear_gpio.c                          |  102 ++++
>  drivers/i2c/designware_i2c.c                       |   16 +-
>  drivers/mtd/Makefile                               |    2 +-
>  drivers/mtd/nand/Makefile                          |    1 +
>  drivers/mtd/nand/fsmc_nand.c                       |  486
> ++++++++++++++++++++ drivers/mtd/nand/spr_nand.c                        | 
> 124 -----
>  drivers/mtd/{spr_smi.c => st_smi.c}                |  255 ++++++----
>  drivers/net/designware.c                           |  126 +++--
>  drivers/net/designware.h                           |    2 +
>  drivers/rtc/m41t62.c                               |   10 +-
>  include/configs/spear-common.h                     |   94 ++--
>  include/configs/{spear3xx.h => spear3xx_evb.h}     |   62 ++-
>  include/configs/{spear6xx.h => spear6xx_evb.h}     |   20 +-
>  include/linux/mtd/fsmc_nand.h                      |  101 ++++
>  .../spr_smi.h => include/linux/mtd/st_smi.h        |   10 +-
>  include/netdev.h                                   |    2 +-
>  lib/Makefile                                       |    2 +-
>  56 files changed, 3229 insertions(+), 769 deletions(-)
>  create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
>  create mode 100644 arch/arm/cpu/arm926ejs/spear/spear600.c
>  create mode 100644 arch/arm/cpu/arm926ejs/spear/spl.c
>  create mode 100644 arch/arm/cpu/arm926ejs/spear/spl_boot.c
>  create mode 100644
> arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c create
> mode 100644 arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c
> create mode 100644
> arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c create
> mode 100644
> arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c create
> mode 100644 arch/arm/cpu/arm926ejs/spear/start.S
>  create mode 100644 arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
>  create mode 100644 arch/arm/include/asm/arch-spear/clk.h
>  create mode 100644 arch/arm/include/asm/arch-spear/gpio.h
>  delete mode 100644 arch/arm/include/asm/arch-spear/spr_nand.h
>  create mode 100644 arch/arm/include/asm/arch-spear/spr_ssp.h
>  delete mode 100644 arch/arm/include/asm/arch-spear/spr_xloader_table.h
>  delete mode 100644 board/spear/spear300/config.mk
>  delete mode 100644 board/spear/spear310/config.mk
>  delete mode 100644 board/spear/spear320/config.mk
>  delete mode 100644 board/spear/spear600/config.mk
>  create mode 100644 drivers/gpio/spear_gpio.c
>  create mode 100644 drivers/mtd/nand/fsmc_nand.c
>  delete mode 100644 drivers/mtd/nand/spr_nand.c
>  rename drivers/mtd/{spr_smi.c => st_smi.c} (62%)
>  rename include/configs/{spear3xx.h => spear3xx_evb.h} (72%)
>  rename include/configs/{spear6xx.h => spear6xx_evb.h} (74%)
>  create mode 100644 include/linux/mtd/fsmc_nand.h
>  rename arch/arm/include/asm/arch-spear/spr_smi.h =>
> include/linux/mtd/st_smi.h (95%)
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
Albert ARIBAUD - June 22, 2012, 9:18 a.m.
Hi Stefan,

On Fri, 22 Jun 2012 08:01:15 +0200, Stefan Roese <sr@denx.de> wrote:
> Hi Albert,
> 
> as you requested, here a short reminder...
> 
> On Tuesday 05 June 2012 08:58:26 Stefan Roese wrote:
> > Hi Albert!
> > 
> > I have collected all of the remaining ARM/SPEAr patches in my
> > staging repository. There are some dependencies between the
> > patches, so I also added the NOR, NAND and ethernet patches
> > in this pull request. The patches have the Acked-by from the
> > corresponding custodians (Joe for networking, Scott for NAND,
> > myself for NOR).
> > 
> > Since most of the patches are ARM/SPEAr platform related, I'm
> > pushing the patchset through your ARM repository. Please pull
> > and push to Wolfgang.
> > 
> > Thanks,
> > Stefan
> > 
> > 
> > The following changes since commit
> > 4398d55991eb3c2484a2a8e991d701e5d7a64874:
> > 
> >   net: sh-eth: Add support Gigabit of SH7734 (2012-05-23 17:53:09
> > -0500)
> > 
> > are available in the git repository at:
> > 
> >   git://www.denx.de/git/u-boot-staging.git sr@denx.de
> > 
> > for you to fetch changes up to
> > e94b7cb06a246532aba7af9e0f2040d4facba5db:
> > 
> >   MTD: SPEAr SMI: Add write support for length < 4 bytes (2012-06-05
> > 08:42:50 +0200)

Assigned to myself under review in patchwork, thanks.
 
Amicalement,
Stefan Roese - July 5, 2012, 1:10 p.m.
Hi Albert,

as you seem to be working on U-Boot patches right now, here another short 
reminder from me. ;)

Thanks,
Stefan

On Friday 22 June 2012 08:01:15 Stefan Roese wrote:
> Hi Albert,
> 
> as you requested, here a short reminder...
> 
> On Tuesday 05 June 2012 08:58:26 Stefan Roese wrote:
> > Hi Albert!
> > 
> > I have collected all of the remaining ARM/SPEAr patches in my
> > staging repository. There are some dependencies between the
> > patches, so I also added the NOR, NAND and ethernet patches
> > in this pull request. The patches have the Acked-by from the
> > corresponding custodians (Joe for networking, Scott for NAND,
> > myself for NOR).
> > 
> > Since most of the patches are ARM/SPEAr platform related, I'm
> > pushing the patchset through your ARM repository. Please pull
> > and push to Wolfgang.
> > 
> > Thanks,
> > Stefan
> > 
> > 
> > The following changes since commit
> > 
> > 4398d55991eb3c2484a2a8e991d701e5d7a64874:
> >   net: sh-eth: Add support Gigabit of SH7734 (2012-05-23 17:53:09 -0500)
> > 
> > are available in the git repository at:
> >   git://www.denx.de/git/u-boot-staging.git sr@denx.de
> > 
> > for you to fetch changes up to e94b7cb06a246532aba7af9e0f2040d4facba5db:
> >   MTD: SPEAr SMI: Add write support for length < 4 bytes (2012-06-05
> > 
> > 08:42:50 +0200)
> > 
> > ----------------------------------------------------------------
> > 
> > Amit Virdi (10):
> >       st_smi: Return error in case TFF is not set
> >       st_smi: Change SMI timeout values
> >       st_smi: Enhance the error handling
> >       st_smi: Change timeout loop implementation
> >       SPEAr: Fix ARM relocation support
> >       SPEAr: Eliminate dependency on Xloader table
> >       SPEAr: Initialize SNOR in early_board_init_f
> >       SPEAr: Remove CONFIG_MTD_NAND_VERIFY_WRITE to speed up NAND access
> >       cleanup/SPEAr: Remove unnecessary parenthesis
> >       cleanup/SPEAr: Define configuration flags more elegantly
> > 
> > Armando Visconti (4):
> >       st_smi: Removed no needed dependency on ST_M25Pxx_ID
> >       st_smi: Change the flash probing method
> >       st_smi: Fix bug in flash_print_info()
> >       st_smi: Fixed page size for Winbond W25Q128FV flash
> > 
> > Shiraz Hashim (5):
> >       st_smi: Move status register read before modifying ctrl register
> >       SPEAr: Enable autoneg for ethernet
> >       SPEAr: Enable dcache for fast file transfer
> >       SPEAr: explicitly select clk src for UART
> >       SPEAr: Correct SoC ID offset in misc configuration space
> > 
> > Simon Glass (1):
> >       arm: Don't use printf() in SPL builds
> > 
> > Stefan Roese (10):
> >       net: Multiple updates/enhancements to designware.c
> >       GPIO: Add SPEAr GPIO driver
> >       SPL: common/Makefile: Add image.c to SPL build
> >       SPL: lib/Makefile: Add crc32.c to SPL build
> >       SPL: ARM: spear: Remove some objects from SPL build
> >       Makefile: Add u-boot.spr build target (SPEAr)
> >       SPL: ARM: spear: Add SPL support for SPEAr600 platform
> >       rtc/m41t62: Add support for M41T82 with HT (Halt Update)
> >       i2c: designware_i2c.c: Add support for the "i2c probe" command
> >       MTD: SPEAr SMI: Add write support for length < 4 bytes
> > 
> > Vipin KUMAR (14):
> >       mtd/NAND: Add FSMC driver support
> >       SPEAr: Configure FSMC driver for NAND interface
> >       mtd/NAND: Remove obsolete SPEAr specific NAND drivers
> >       st_smi: Add support for SPEAr SMI driver
> >       st_smi: Read status until timeout happens
> >       SPEAr: Place ethaddr write and read within CONFIG_CMD_NET
> >       SPEAr: Configure network support for spear SoCs
> >       SPEAr: Add macb driver support for spear310 and spear320
> >       SPEAr: Add basic arch related support for SPEAr SoCs
> >       SPEAr: Add configuration options for spear3xx and spear6xx boards
> >       SPEAr: Remove unused flag (CONFIG_SYS_HZ_CLOCK)
> >       SPEAr: Change the default environment variables
> >       SPEAr: Enable usb device high speed support
> >       SPEAr: Enable udc and usb-console support only for usbtty
> > 
> > configuration
> > 
> > Vipin Kumar (6):
> >       st_smi: Fix smi read status
> >       SPEAr: Add interface information in initialization
> >       SPEAr: Enable CONFIG_SYS_FLASH_PROTECTION
> >       SPEAr: Correct the definition of CONFIG_SYS_MONITOR_BASE
> >       SPEAr: Enable CONFIG_SYS_FLASH_EMPTY_INFO macro
> >       SPEAr: Enable ONFI nand flash detection for spear3xx and 6xx and
> >       evb
> >  
> >  Makefile                                           |   17 +
> >  arch/arm/cpu/arm926ejs/spear/Makefile              |   25 +-
> >  arch/arm/cpu/arm926ejs/spear/cpu.c                 |   87 ++++
> >  arch/arm/cpu/arm926ejs/spear/spear600.c            |  236 ++++++++++
> >  arch/arm/cpu/arm926ejs/spear/spl.c                 |  282 ++++++++++++
> >  arch/arm/cpu/arm926ejs/spear/spl_boot.c            |  197 ++++++++
> >  .../spear/spr600_mt47h128m8_3_266_cl5_async.c      |  130 ++++++
> >  .../spear/spr600_mt47h32m16_333_cl5_psync.c        |  135 ++++++
> >  .../spear/spr600_mt47h32m16_37e_166_cl4_sync.c     |  130 ++++++
> >  .../spear/spr600_mt47h64m16_3_333_cl5_psync.c      |  144 ++++++
> >  arch/arm/cpu/arm926ejs/spear/start.S               |  122 +++++
> >  arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds        |   87 ++++
> >  arch/arm/include/asm/arch-spear/clk.h              |   27 ++
> >  arch/arm/include/asm/arch-spear/gpio.h             |   40 ++
> >  arch/arm/include/asm/arch-spear/hardware.h         |   63 ++-
> >  arch/arm/include/asm/arch-spear/spr_defs.h         |   23 +
> >  arch/arm/include/asm/arch-spear/spr_gpt.h          |    4 +-
> >  arch/arm/include/asm/arch-spear/spr_misc.h         |  147 +++++-
> >  arch/arm/include/asm/arch-spear/spr_nand.h         |   57 ---
> >  arch/arm/include/asm/arch-spear/spr_ssp.h          |   45 ++
> >  arch/arm/include/asm/arch-spear/spr_syscntl.h      |   14 +
> >  .../arm/include/asm/arch-spear/spr_xloader_table.h |   67 ---
> >  arch/arm/lib/eabi_compat.c                         |    3 +-
> >  board/spear/common/Makefile                        |    2 +
> >  board/spear/common/spr_misc.c                      |  102 ++--
> >  board/spear/spear300/config.mk                     |   39 --
> >  board/spear/spear300/spear300.c                    |   27 +-
> >  board/spear/spear310/config.mk                     |   44 --
> >  board/spear/spear310/spear310.c                    |   44 +-
> >  board/spear/spear320/config.mk                     |   44 --
> >  board/spear/spear320/spear320.c                    |   43 +-
> >  board/spear/spear600/Makefile                      |    2 +
> >  board/spear/spear600/config.mk                     |   39 --
> >  board/spear/spear600/spear600.c                    |   30 +-
> >  boards.cfg                                         |   24 +-
> >  common/Makefile                                    |    2 +-
> >  config.mk                                          |    4 +
> >  doc/README.spear                                   |   54 ++-
> >  drivers/gpio/Makefile                              |    1 +
> >  drivers/gpio/spear_gpio.c                          |  102 ++++
> >  drivers/i2c/designware_i2c.c                       |   16 +-
> >  drivers/mtd/Makefile                               |    2 +-
> >  drivers/mtd/nand/Makefile                          |    1 +
> >  drivers/mtd/nand/fsmc_nand.c                       |  486
> > 
> > ++++++++++++++++++++ drivers/mtd/nand/spr_nand.c                        |
> > 124 -----
> > 
> >  drivers/mtd/{spr_smi.c => st_smi.c}                |  255 ++++++----
> >  drivers/net/designware.c                           |  126 +++--
> >  drivers/net/designware.h                           |    2 +
> >  drivers/rtc/m41t62.c                               |   10 +-
> >  include/configs/spear-common.h                     |   94 ++--
> >  include/configs/{spear3xx.h => spear3xx_evb.h}     |   62 ++-
> >  include/configs/{spear6xx.h => spear6xx_evb.h}     |   20 +-
> >  include/linux/mtd/fsmc_nand.h                      |  101 ++++
> >  .../spr_smi.h => include/linux/mtd/st_smi.h        |   10 +-
> >  include/netdev.h                                   |    2 +-
> >  lib/Makefile                                       |    2 +-
> >  56 files changed, 3229 insertions(+), 769 deletions(-)
> >  create mode 100644 arch/arm/cpu/arm926ejs/spear/cpu.c
> >  create mode 100644 arch/arm/cpu/arm926ejs/spear/spear600.c
> >  create mode 100644 arch/arm/cpu/arm926ejs/spear/spl.c
> >  create mode 100644 arch/arm/cpu/arm926ejs/spear/spl_boot.c
> >  create mode 100644
> > 
> > arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c create
> > mode 100644
> > arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c create
> > mode 100644
> > arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c create
> > mode 100644
> > arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c create
> > mode 100644 arch/arm/cpu/arm926ejs/spear/start.S
> > 
> >  create mode 100644 arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
> >  create mode 100644 arch/arm/include/asm/arch-spear/clk.h
> >  create mode 100644 arch/arm/include/asm/arch-spear/gpio.h
> >  delete mode 100644 arch/arm/include/asm/arch-spear/spr_nand.h
> >  create mode 100644 arch/arm/include/asm/arch-spear/spr_ssp.h
> >  delete mode 100644 arch/arm/include/asm/arch-spear/spr_xloader_table.h
> >  delete mode 100644 board/spear/spear300/config.mk
> >  delete mode 100644 board/spear/spear310/config.mk
> >  delete mode 100644 board/spear/spear320/config.mk
> >  delete mode 100644 board/spear/spear600/config.mk
> >  create mode 100644 drivers/gpio/spear_gpio.c
> >  create mode 100644 drivers/mtd/nand/fsmc_nand.c
> >  delete mode 100644 drivers/mtd/nand/spr_nand.c
> >  rename drivers/mtd/{spr_smi.c => st_smi.c} (62%)
> >  rename include/configs/{spear3xx.h => spear3xx_evb.h} (72%)
> >  rename include/configs/{spear6xx.h => spear6xx_evb.h} (74%)
> >  create mode 100644 include/linux/mtd/fsmc_nand.h
> >  rename arch/arm/include/asm/arch-spear/spr_smi.h =>
> > 
> > include/linux/mtd/st_smi.h (95%)
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot@lists.denx.de
> > http://lists.denx.de/mailman/listinfo/u-boot
Albert ARIBAUD - July 5, 2012, 9:37 p.m.
Hi Stefan,

On Thu, 5 Jul 2012 15:10:26 +0200, Stefan Roese <sr@denx.de> wrote:
> Hi Albert,
> 
> as you seem to be working on U-Boot patches right now, here another short 
> reminder from me. ;)
> 
> Thanks,
> Stefan

Can you rebase this on current uboot-arm? Sorry for the inconvenience.

Amicalement,