Patchwork [U-Boot] Please pull u-boot-ti/master

login
register
mail settings
Submitter Tom Rini
Date May 25, 2012, 3:02 p.m.
Message ID <20120525150247.GB25860@bill-the-cat>
Download mbox
Permalink /patch/161378/
State Accepted
Delegated to: Albert ARIBAUD
Headers show

Pull-request

git://git.denx.de/u-boot-ti.git master

Comments

Tom Rini - May 25, 2012, 3:02 p.m.
Hello,

The following changes since commit 2ca4a209a5b961ad1be8782c68dabe326d77dfaf:

  OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer (2012-05-15 08:31:41 +0200)

are available in the git repository at:

  git://git.denx.de/u-boot-ti.git master

for you to fetch changes up to aa54ece4e24f6ddd14914ca8c0c02ce5f279020e:

  cm-t35: print PCB revision information (2012-05-25 07:58:41 -0700)

----------------------------------------------------------------
Heiko Schocher (1):
      arm,davinci: update for enbw_cmc board

Igor Grinberg (1):
      cm-t35: reduce the environment size

Lokesh Vutla (7):
      OMAP5: Adding correct Control id code for OMAP5430
      OMAP5: ADD chip detection for OMAP5432 SOC
      OMAP5: Configure the io settings for omap5432 uevm board
      OMAP5: ADD precalculated timings for ddr3
      OMAP5: EMIF: Add support for DDR3 device
      OMAP5: DPLL core lock for OMAP5432
      OMAP5: Change voltages for omap5432

Nikita Kiryanov (3):
      cm-t35: fix incorrect BOARD_REV_SIZE value
      cm-t35: fix legacy board revision representation
      cm-t35: print PCB revision information

SRICHARAN R (5):
      ARM: OMAP4+: dmm: Take care of overlapping dmm and trap sections.
      ARM: OMAP5: dmm: Create a tiler trap section.
      ARM: OMAP5: Align memory used for testing to the power of 2
      ARM: OMAP5: Correct the DRAM_ADDR_SPACE_END macro.
      ARM: OMAP4: Correct the lpddr2 io settings register value.

Thomas Weber (1):
      omap4/5: Use CPUDIR for .lds script

Tom Rini (10):
      am33xx: Do not call init_timer twice
      Revert "I2C: OMAP: detect more devices when probing an i2c bus"
      am335x: Correct i2c sysc offset
      am33xx: Fill in more cm_wkuppll / cm_perpll
      am33xx: Fix i2c sampling rate typo
      omap24xx_i2c: Add AM33XX support
      OMAP3 Beagle: Set BOOTDELAY to 3
      omap3evm: Set BOOTDELAY to 3
      omap3_beagle: Add CONFIG_CMD_ASKENV
      omap3evm: Add CONFIG_CMD_ASKENV

Troy Kisky (1):
      DaVinci: fix ddr2 vtp i/o calibration

 arch/arm/cpu/arm926ejs/davinci/lowlevel_init.S |    7 +-
 arch/arm/cpu/armv7/am33xx/board.c              |   30 +-
 arch/arm/cpu/armv7/omap-common/clocks-common.c |    8 +-
 arch/arm/cpu/armv7/omap-common/emif-common.c   |  121 ++++++++-
 arch/arm/cpu/armv7/omap-common/hwinit-common.c |   20 +-
 arch/arm/cpu/armv7/omap4/hwinit.c              |    5 +
 arch/arm/cpu/armv7/omap4/sdram_elpida.c        |    1 +
 arch/arm/cpu/armv7/omap5/clocks.c              |   31 ++-
 arch/arm/cpu/armv7/omap5/hwinit.c              |  123 +++++++--
 arch/arm/cpu/armv7/omap5/sdram.c               |   56 +++-
 arch/arm/include/asm/arch-am33xx/cpu.h         |   42 ++-
 arch/arm/include/asm/arch-am33xx/i2c.h         |    8 +-
 arch/arm/include/asm/arch-omap4/clocks.h       |    5 +
 arch/arm/include/asm/arch-omap4/omap.h         |    2 +-
 arch/arm/include/asm/arch-omap5/clocks.h       |   15 +
 arch/arm/include/asm/arch-omap5/omap.h         |   20 +-
 arch/arm/include/asm/emif.h                    |   50 +++-
 arch/arm/include/asm/omap_common.h             |    1 +
 board/cm_t35/cm_t35.c                          |   33 +++
 board/cm_t35/eeprom.c                          |   26 +-
 board/cm_t35/eeprom.h                          |    5 +
 board/enbw/enbw_cmc/enbw_cmc.c                 |  347 ++++++++++++++++++++++--
 board/ti/am335x/evm.c                          |   13 +-
 doc/README.switch_config                       |   25 ++
 drivers/i2c/omap24xx_i2c.c                     |   46 +++-
 include/configs/cm_t35.h                       |    3 +-
 include/configs/enbw_cmc.h                     |   20 +-
 include/configs/omap3_beagle.h                 |    4 +-
 include/configs/omap3_evm.h                    |    4 +-
 include/configs/omap4_common.h                 |    2 +-
 include/configs/omap5_evm.h                    |    2 +-
 31 files changed, 922 insertions(+), 153 deletions(-)
 create mode 100644 doc/README.switch_config

With this, I'm considering anything that's not a bugfix to existing code
(that's in my custodial area) to be for the 'next' branch and not for
the v2012.07 release (since we're a little bit past the official merge
window closing).
Albert ARIBAUD - June 10, 2012, 9:39 p.m.
Hi Tom,

Le 25/05/2012 17:02, Tom Rini a écrit :
> Hello,
>
> The following changes since commit 2ca4a209a5b961ad1be8782c68dabe326d77dfaf:
>
>    OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer (2012-05-15 08:31:41 +0200)
>
> are available in the git repository at:
>
>    git://git.denx.de/u-boot-ti.git master
>
> for you to fetch changes up to aa54ece4e24f6ddd14914ca8c0c02ce5f279020e:
>
>    cm-t35: print PCB revision information (2012-05-25 07:58:41 -0700)

Applied to u-boot-arm/master, thanks!

Amicalement,