Message ID | 20120523223210.GA20536@electric-eye.fr.zoreil.com |
---|---|
State | RFC, archived |
Delegated to: | David Miller |
Headers | show |
> You may try the attached patches on top of current -git. A complete dmesg > will be welcome. So will an 'ethtool -d eth0' if the device stops working. > > You did not label the problem as a serious one. Does it means that the > driver automatically recovers ? It does indeed recover fine. (Of course, there may be lost packets or memory leaks.) The machine is the main office file server, which also serves as an outside network firewall, so anything serious would be noted VERY quickly. > I'll add some ring and registers debug stuff tomorrow. The main thing is I don't like to reboot it very often; it's not a dev machine. But I can, as long as it's outside normal work hours. So thank you; I'll give your patch a try. Here's a complete dmesg for the current boot, which includes the message being complained about. If there's some subset that's of interest for future test reports, tell me and I won't spam the mailing list as much. Initializing cgroup subsys cpu Linux version 3.4.0-00017-g3df9c78 ($USER@$HOST) (gcc version 4.7.0 (Debian 4.7.0-8) ) #152 SMP Mon May 21 22:46:39 UTC 2012 Command line: auto BOOT_IMAGE=Amd64 ro root=905 libata.fua=1 acpi_enforce_resources=lax k10temp.force=1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000093800 (usable) BIOS-e820: 0000000000093800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dffa0000 (usable) BIOS-e820: 00000000dffc0000 - 00000000dffce000 (ACPI data) BIOS-e820: 00000000dffce000 - 00000000dfff0000 (ACPI NVS) BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000220000000 (usable) NX (Execute Disable) protection: active DMI present. DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7376/MS-7376, BIOS V1.7 01/13/2009 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x220000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFE0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000220000000 aka 8704M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xdffa0 max_arch_pfn = 0x400000000 found SMP MP-table at [ffff8800000ff780] ff780 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff880000091000] 91000 size 8192 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000dffa0000 0000000000 - 00c0000000 page 1G 00c0000000 - 00dfe00000 page 2M 00dfe00000 - 00dffa0000 page 4k kernel direct mapping tables up to dffa0000 @ 1fffd000-20000000 init_memory_mapping: 0000000100000000-0000000220000000 0100000000 - 0200000000 page 1G 0200000000 - 0220000000 page 2M kernel direct mapping tables up to 220000000 @ dff9e000-dffa0000 ACPI: RSDP 00000000000f9e30 00014 (v00 ACPIAM) ACPI: RSDT 00000000dffc0000 00038 (v01 011309 RSDT1044 20090113 MSFT 00000097) ACPI: FACP 00000000dffc0200 00084 (v02 011309 FACP1044 20090113 MSFT 00000097) ACPI: DSDT 00000000dffc0440 06E9B (v01 1ADNC 1ADNC001 00000001 INTL 20051117) ACPI: FACS 00000000dffce000 00040 ACPI: APIC 00000000dffc0390 0006C (v01 011309 APIC1044 20090113 MSFT 00000097) ACPI: MCFG 00000000dffc0400 0003C (v01 011309 OEMMCFG 20090113 MSFT 00000097) ACPI: OEMB 00000000dffce040 00071 (v01 011309 OEMB1044 20090113 MSFT 00000097) ACPI: HPET 00000000dffc72e0 00038 (v01 011309 OEMHPET 20090113 MSFT 00000097) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00220000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x00000093 0: 0x00000100 -> 0x000dffa0 0: 0x00100000 -> 0x00220000 On node 0 totalpages: 2096931 DMA zone: 64 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3905 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 896992 pages, LIFO batch:31 Normal zone: 18432 pages used for memmap Normal zone: 1161216 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at dfffe000 (gap: dfffe000:1ff02000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 23 pages/cpu @ffff88021fc00000 s72704 r0 d21504 u524288 pcpu-alloc: s72704 r0 d21504 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062113 Kernel command line: auto BOOT_IMAGE=Amd64 ro root=905 libata.fua=1 acpi_enforce_resources=lax k10temp.force=1 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ d4000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ d4000000 Memory: 8105120k/8912896k available (4123k kernel code, 525172k absent, 282604k reserved, 1959k data, 476k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:712 16 Console: colour VGA+ 80x50 console [tty0] enabled hpet clockevent registered Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using HPET reference calibration Detected 2500.119 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.23 BogoMIPS (lpj=25001190) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks LVT offset 0 assigned for vector 0xf9 using AMD E400 aware idle routine Freeing SMP alternatives: 12k freed ACPI: Core revision 20120320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. NMI watchdog: enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 NMI watchdog: enabled, takes one hw-pmu counter. System has AMD C1E enabled Switch to broadcast mode on CPU1 #2 NMI watchdog: enabled, takes one hw-pmu counter. Switch to broadcast mode on CPU2 #3 Ok. NMI watchdog: enabled, takes one hw-pmu counter. Switch to broadcast mode on CPU3 Brought up 4 CPUs Total of 4 processors activated (20000.95 BogoMIPS). Switch to broadcast mode on CPU0 xor: automatically using best checksumming function: generic_sse generic_sse: 9959.200 MB/sec xor: using function: generic_sse (9959.200 MB/sec) NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000e0000000 aka 3584M Fam 10h mmconf [mem 0xe0000000-0xefffffff] node 0 link 0: mmio [e0000000, efffffff] ==> none node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [e0000000, dfffffff] ==> none TOM2: 0000000220000000 aka 8704M bus: [00, 07] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xf0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x220000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access bio: create slab <bio-0> at 0 raid6: int64x1 2430 MB/s raid6: int64x2 2128 MB/s raid6: int64x4 2234 MB/s raid6: int64x8 1473 MB/s raid6: sse2x1 3432 MB/s raid6: sse2x2 5661 MB/s raid6: sse2x4 6710 MB/s raid6: using algorithm sse2x4 (6710 MB/s) ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Detected MSI hardware, enabling workarounds. ACPI: EC: Look up EC in DSDT ACPI: Executed 3 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000 pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:597b] type 01 class 0x060400 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: [1002:597e] type 01 class 0x060400 pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 00 class 0x010601 pci 0000:00:12.0: reg 10: [io 0x7000-0x7007] pci 0000:00:12.0: reg 14: [io 0x6000-0x6003] pci 0000:00:12.0: reg 18: [io 0x5000-0x5007] pci 0000:00:12.0: reg 1c: [io 0x4000-0x4003] pci 0000:00:12.0: reg 20: [io 0x3000-0x300f] pci 0000:00:12.0: reg 24: [mem 0xfe5ff800-0xfe5ffbff] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xfe5fe000-0xfe5fefff] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 pci 0000:00:13.1: reg 10: [mem 0xfe5fd000-0xfe5fdfff] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 pci 0000:00:13.2: reg 10: [mem 0xfe5fc000-0xfe5fcfff] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 pci 0000:00:13.3: reg 10: [mem 0xfe5fb000-0xfe5fbfff] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 pci 0000:00:13.4: reg 10: [mem 0xfe5fa000-0xfe5fafff] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 pci 0000:00:13.5: reg 10: [mem 0xfe5ff000-0xfe5ff0ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xfe5f4000-0xfe5f7fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 pci 0000:01:00.0: [1002:5b60] type 00 class 0x030000 pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfdffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xfe6f0000-0xfe6fffff 64bit] pci 0000:01:00.0: reg 20: [io 0x8000-0x80ff] pci 0000:01:00.0: reg 30: [mem 0xfe6c0000-0xfe6dffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: [1002:5b70] type 00 class 0x038000 pci 0000:01:00.1: reg 10: [mem 0xfe6e0000-0xfe6effff 64bit] pci 0000:01:00.1: supports D1 D2 pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0x8000-0x8fff] pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfdffffff 64bit pref] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 pci 0000:02:00.0: reg 10: [io 0x9800-0x98ff] pci 0000:02:00.0: reg 18: [mem 0xfe7ff000-0xfe7fffff 64bit] pci 0000:02:00.0: reg 30: [mem 0xfe7c0000-0xfe7dffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:00:05.0: PCI bridge to [bus 02-02] pci 0000:00:05.0: bridge window [io 0x9000-0x9fff] pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:03:00.0: [105a:3f20] type 00 class 0x010400 pci 0000:03:00.0: reg 10: [io 0xa800-0xa87f] pci 0000:03:00.0: reg 18: [io 0xa400-0xa4ff] pci 0000:03:00.0: reg 1c: [mem 0xfe8ff000-0xfe8fffff] pci 0000:03:00.0: reg 20: [mem 0xfe8c0000-0xfe8dffff] pci 0000:03:00.0: reg 24: [mem 0xfe8fc000-0xfe8fdfff] pci 0000:03:00.0: supports D1 pci 0000:00:09.0: PCI bridge to [bus 03-03] pci 0000:00:09.0: bridge window [io 0xa000-0xafff] pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:04:00.0: [1106:3044] type 00 class 0x0c0010 pci 0000:04:00.0: reg 10: [mem 0xfe9ff800-0xfe9fffff] pci 0000:04:00.0: reg 14: [io 0xc800-0xc87f] pci 0000:04:00.0: supports D2 pci 0000:04:00.0: PME# supported from D2 D3hot D3cold pci 0000:04:02.0: [1415:9501] type 00 class 0x070006 pci 0000:04:02.0: reg 10: [io 0xc400-0xc41f] pci 0000:04:02.0: reg 14: [mem 0xfe9fe000-0xfe9fefff] pci 0000:04:02.0: reg 18: [io 0xc000-0xc01f] pci 0000:04:02.0: reg 1c: [mem 0xfe9fd000-0xfe9fdfff] pci 0000:04:02.0: supports D2 pci 0000:04:02.0: PME# supported from D0 D2 D3hot pci 0000:04:02.1: [1415:9513] type 00 class 0x070101 pci 0000:04:02.1: reg 10: [io 0xb800-0xb807] pci 0000:04:02.1: reg 14: [io 0xb400-0xb407] pci 0000:04:02.1: reg 18: [io 0xb000-0xb01f] pci 0000:04:02.1: reg 1c: [mem 0xfe9fc000-0xfe9fcfff] pci 0000:04:02.1: supports D2 pci 0000:04:02.1: PME# supported from D0 D2 D3hot pci 0000:04:03.0: [1011:0024] type 01 class 0x060400 pci 0000:00:14.4: PCI bridge to [bus 04-05] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xb000-0xefff] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfebfffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) pci 0000:05:04.0: [1011:0019] type 00 class 0x020000 pci 0000:05:04.0: reg 10: [io 0xe800-0xe87f] pci 0000:05:04.0: reg 14: [mem 0xfebffc00-0xfebfffff] pci 0000:05:04.0: reg 30: [mem 0xfeb80000-0xfebbffff pref] pci 0000:05:05.0: [1011:0019] type 00 class 0x020000 pci 0000:05:05.0: reg 10: [io 0xe400-0xe47f] pci 0000:05:05.0: reg 14: [mem 0xfebff800-0xfebffbff] pci 0000:05:05.0: reg 30: [mem 0xfeb40000-0xfeb7ffff pref] pci 0000:05:06.0: [1011:0019] type 00 class 0x020000 pci 0000:05:06.0: reg 10: [io 0xe000-0xe07f] pci 0000:05:06.0: reg 14: [mem 0xfebff400-0xfebff7ff] pci 0000:05:06.0: reg 30: [mem 0xfeb00000-0xfeb3ffff pref] pci 0000:05:07.0: [1011:0019] type 00 class 0x020000 pci 0000:05:07.0: reg 10: [io 0xd800-0xd87f] pci 0000:05:07.0: reg 14: [mem 0xfebff000-0xfebff3ff] pci 0000:05:07.0: reg 30: [mem 0xfeac0000-0xfeafffff pref] pci 0000:04:03.0: PCI bridge to [bus 05-05] pci 0000:04:03.0: bridge window [io 0xd000-0xefff] pci 0000:04:03.0: bridge window [mem 0xfea00000-0xfebfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs *9) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered Advanced Linux Sound Architecture Driver Version 1.0.25. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] reserve RAM buffer: 0000000000093800 - 000000000009ffff reserve RAM buffer: 00000000dffa0000 - 00000000dfffffff hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000d0000-0x000dffff window] pnp 00:00: [mem 0xe0000000-0xdfffffff window disabled] pnp 00:00: [mem 0xf0000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x0070-0x0071] pnp 00:02: [irq 8] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: [io 0x0061] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:04: [io 0x00f0-0x00ff] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x03f8-0x03ff] pnp 00:05: [irq 4] pnp 00:05: [dma 0 disabled] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:06: [io 0x03f0-0x03f5] pnp 00:06: [io 0x03f7] pnp 00:06: [irq 6] pnp 00:06: [dma 2] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:07: [mem 0xfed00000-0xfed003ff] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:08: [mem 0xfec00000-0xfec00fff] pnp 00:08: [mem 0xfee00000-0xfee00fff] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x003f] pnp 00:09: [io 0x0062-0x0063] pnp 00:09: [io 0x0065-0x006f] pnp 00:09: [io 0x0072-0x007f] pnp 00:09: [io 0x0080] pnp 00:09: [io 0x0084-0x0086] pnp 00:09: [io 0x0088] pnp 00:09: [io 0x008c-0x008e] pnp 00:09: [io 0x0090-0x009f] pnp 00:09: [io 0x00a2-0x00bf] pnp 00:09: [io 0x00b1] pnp 00:09: [io 0x00e0-0x00ef] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cd1] pnp 00:09: [io 0x0cd2-0x0cd3] pnp 00:09: [io 0x0cd4-0x0cd5] pnp 00:09: [io 0x0cd6-0x0cd7] pnp 00:09: [io 0x0cd8-0x0cdf] pnp 00:09: [io 0x0800-0x089f] pnp 00:09: [io 0x0b10-0x0b1f] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled] pnp 00:09: [io 0x0900-0x090f] pnp 00:09: [io 0x0910-0x091f] pnp 00:09: [io 0xfe00-0xfefe] pnp 00:09: [mem 0xffb80000-0xffbfffff] system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cd1] has been reserved system 00:09: [io 0x0cd2-0x0cd3] has been reserved system 00:09: [io 0x0cd4-0x0cd5] has been reserved system 00:09: [io 0x0cd6-0x0cd7] has been reserved system 00:09: [io 0x0cd8-0x0cdf] has been reserved system 00:09: [io 0x0800-0x089f] has been reserved system 00:09: [io 0x0b10-0x0b1f] has been reserved system 00:09: [io 0x0900-0x090f] has been reserved system 00:09: [io 0x0910-0x091f] has been reserved system 00:09: [io 0xfe00-0xfefe] has been reserved system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [io 0x0060] pnp 00:0a: [io 0x0064] pnp 00:0a: [irq 1] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0b: [irq 12] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled] pnp 00:0c: [io 0x0600-0x06df] pnp 00:0c: [io 0x0ae0-0x0aef] system 00:0c: [io 0x0600-0x06df] has been reserved system 00:0c: [io 0x0ae0-0x0aef] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0d: [mem 0xe0000000-0xefffffff] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0e: [mem 0x00000000-0x0009ffff] pnp 00:0e: [mem 0x000c0000-0x000cffff] pnp 00:0e: [mem 0x000e0000-0x000fffff] pnp 00:0e: [mem 0x00100000-0xdfffffff] pnp 00:0e: [mem 0xfec00000-0xffffffff] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0e: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0e: disabling [mem 0x00100000-0xdfffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0x8000-0x8fff] pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfdffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 02-02] pci 0000:00:05.0: bridge window [io 0x9000-0x9fff] pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 03-03] pci 0000:00:09.0: bridge window [io 0xa000-0xafff] pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:04:03.0: PCI bridge to [bus 05-05] pci 0000:04:03.0: bridge window [io 0xd000-0xefff] pci 0000:04:03.0: bridge window [mem 0xfea00000-0xfebfffff] pci 0000:00:14.4: PCI bridge to [bus 04-05] pci 0000:00:14.4: bridge window [io 0xb000-0xefff] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfebfffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 0 [io 0xb000-0xefff] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfebfffff] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:04: resource 8 [mem 0xf0000000-0xfebfffff] pci_bus 0000:05: resource 0 [io 0xd000-0xefff] pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ d4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture LVT offset 1 assigned for vector 0x400 IBS: LVT offset 1 assigned perf: AMD IBS detected (0x00000007) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 15959 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: duty_cycle spans bit 4 ACPI: processor limited to max C-state 1 Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS4: detected caps 00000700 should be 00000500 0000:04:02.0: ttyS4 at I/O 0xc400 (irq = 22) is a 16C950/954 ttyS1: detected caps 00000700 should be 00000500 0000:04:02.0: ttyS1 at I/O 0xc408 (irq = 22) is a 16C950/954 ttyS2: detected caps 00000700 should be 00000500 0000:04:02.0: ttyS2 at I/O 0xc410 (irq = 22) is a 16C950/954 ttyS3: detected caps 00000700 should be 00000500 0000:04:02.0: ttyS3 at I/O 0xc418 (irq = 22) is a 16C950/954 lp: driver loaded but no devices found Linux agpgart interface v0.103 PCI parallel port detected: 1415:9513, I/O at 0xb800(0x0), IRQ 23 parport0: PC-style at 0xb800, irq 23 [PCSPP] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: module loaded Uniform Multi-Platform E-IDE driver atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00) atiixp 0000:00:14.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07 Probing IDE interface ide0... Refined TSC clocksource calibration: 2500.175 MHz. Switching to clocksource tsc hda: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache cdrom: Uniform CD-ROM driver Revision: 3.20 ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: MSI K9A2 Platinum: enabling 64bit DMA ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe5ff800 port 0xfe5ff900 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfe5ff800 port 0xfe5ff980 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe5ff800 port 0xfe5ffa00 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe5ff800 port 0xfe5ffa80 irq 22 ahci 0000:03:00.0: PDC42819 can only drive SATA devices with this driver ahci 0000:03:00.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode ahci 0000:03:00.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi4 : ahci scsi5 : ahci scsi6 : ahci scsi7 : ahci ata5: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc100 irq 17 ata6: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc180 irq 17 ata7: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc200 irq 17 ata8: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc280 irq 17 Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) tulip0: EEPROM default media type Autosense tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block tulip0: MII transceiver #1 config 3100 status 7869 advertising 01e1 net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebffc00, 00:80:c8:b9:c1:d5, IRQ 21 tulip1: EEPROM default media type Autosense tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block tulip1: MII transceiver #1 config 3100 status 7869 advertising 01e1 net eth1: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebff800, 00:80:c8:b9:c1:d6, IRQ 22 tulip2: EEPROM default media type Autosense tulip2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block tulip2: MII transceiver #1 config 3100 status 7849 advertising 01e1 net eth2: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebff400, 00:80:c8:b9:c1:d7, IRQ 23 tulip3: EEPROM default media type Autosense tulip3: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block tulip3: MII transceiver #1 config 3100 status 7869 advertising 01e1 net eth3: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebff000, 00:80:c8:b9:c1:d8, IRQ 20 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: irq 40 for MSI/MSI-X r8169 0000:02:00.0: eth4: RTL8168b/8111b at 0xffffc90000020000, 00:21:85:16:51:7f, XID 18000000 IRQ 40 r8169 0000:02:00.0: eth4: jumbo features [frames: 4080 bytes, tx checksumming: ko] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe5ff000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe5fe000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe5fd000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe5fc000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe5fb000 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata7: SATA link down (SStatus 0 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133 ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata5.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata2.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata6.00: configured for UDMA/133 ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata5.00: configured for UDMA/133 ata3.00: SB600 AHCI: limiting to 255 sectors per cmd scsi 0:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 ata3.00: configured for UDMA/133 sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 1:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) scsi 2:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 3:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 scsi 4:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 4:0:0:0: [sde] 1465149168 512-byte logical blocks: (750 GB/698 GiB) scsi 5:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 5:0:0:0: [sdf] Write Protect is off sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 10 sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA sdb: sdb1 sdb2 sdb3 sdb4 sd 1:0:0:0: [sdb] Attached SCSI disk sdf: sdf1 sd 5:0:0:0: [sdf] Attached SCSI disk sdd: sdd1 sdd2 sdd3 sdd4 sd 3:0:0:0: [sdd] Attached SCSI disk sde: sde1 sde2 sde3 sde4 sd 4:0:0:0: [sde] Attached SCSI disk hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe5fa000 sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sdc: sdc1 sdc2 sdc3 sdc4 sd 2:0:0:0: [sdc] Attached SCSI disk hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core usbcore: registered new interface driver pl2303 USB Serial support registered for pl2303 i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs i2c /dev entries driver ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251) ACPI: This conflict may cause random problems and system instability ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 pps_ldisc: PPS line discipline registered f71882fg: Found f71882fg chip at 0x600, revision 32 ACPI Warning: 0x0000000000000600-0x0000000000000607 SystemIO conflicts with Region \HMOR 1 (20120320/utaddress-251) ACPI: This conflict may cause random problems and system instability ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode f71882fg f71882fg.1536: Fan: 4 is in duty-cycle mode k10temp 0000:00:18.3: unreliable CPU thermal sensor; check erratum 319 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 EDAC MC: Ver: 2.1.0 AMD64 EDAC driver v3.4.0 EDAC amd64: DRAM ECC disabled. EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver GACT probability on netem: version 1.3 u32 classifier Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. NF_TPROXY: Transparent proxy support initialized, version 4.1.0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. ip_set: protocol 6 IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP: bic registered TCP: cubic registered TCP: westwood registered TCP: highspeed registered TCP: hybla registered TCP: htcp registered TCP: vegas registered TCP: veno registered TCP: scalable registered TCP: lp registered TCP: yeah registered TCP: illinois registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered 8021q: 802.1Q VLAN Support v1.8 registered taskstats version 1 rtc_cmos 00:02: setting system clock to 2012-05-21 23:13:48 UTC (1337642028) powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor (4 cpu cores) (version 2.20.00) [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [Firmware Bug]: powernow-k8: Try again with latest BIOS. ALSA device list: #0: HDA ATI SB at 0xfe5f4000 irq 16 usb 6-2: new low-speed USB device number 2 using ohci_hcd input: HID 0430:0100 as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1 generic-usb 0003:0430:0100.0001: input: USB HID v1.00 Mouse [HID 0430:0100] on usb-0000:00:13.4-2/input0 input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 20 and added 20 devices. md: autorun ... md: considering sdc4 ... md: adding sdc4 ... md: sdc3 has different UUID to sdc4 md: sdc2 has different UUID to sdc4 md: sdc1 has different UUID to sdc4 md: adding sda4 ... md: sda3 has different UUID to sdc4 md: sda2 has different UUID to sdc4 md: sda1 has different UUID to sdc4 md: adding sde4 ... md: sde3 has different UUID to sdc4 md: sde2 has different UUID to sdc4 md: sde1 has different UUID to sdc4 md: adding sdd4 ... md: sdd3 has different UUID to sdc4 md: sdd2 has different UUID to sdc4 md: sdd1 has different UUID to sdc4 md: adding sdb4 ... md: sdb3 has different UUID to sdc4 md: sdb2 has different UUID to sdc4 md: sdb1 has different UUID to sdc4 md: created md6 md: bind<sdb4> md: bind<sdd4> md: bind<sde4> md: bind<sda4> md: bind<sdc4> md: running: <sdc4><sda4><sde4><sdd4><sdb4> bio: create slab <bio-1> at 1 md/raid:md6: device sdc4 operational as raid disk 2 md/raid:md6: device sda4 operational as raid disk 0 md/raid:md6: device sde4 operational as raid disk 4 md/raid:md6: device sdd4 operational as raid disk 3 md/raid:md6: device sdb4 operational as raid disk 1 md/raid:md6: allocated 5350kB md/raid:md6: raid level 5 active with 5 out of 5 devices, algorithm 2 RAID conf printout: --- level:5 rd:5 wd:5 disk 0, o:1, dev:sda4 disk 1, o:1, dev:sdb4 disk 2, o:1, dev:sdc4 disk 3, o:1, dev:sdd4 disk 4, o:1, dev:sde4 created bitmap (173 pages) for device md6 md6: bitmap initialized from disk: read 11/11 pages, set 1 of 354293 bits md6: detected capacity change from 0 to 1486011498496 md: considering sdc3 ... md: adding sdc3 ... md: sdc2 has different UUID to sdc3 md: sdc1 has different UUID to sdc3 md: sda3 has different UUID to sdc3 md: sda2 has different UUID to sdc3 md: sda1 has different UUID to sdc3 md: sde3 has different UUID to sdc3 md: sde2 has different UUID to sdc3 md: sde1 has different UUID to sdc3 md: adding sdd3 ... md: sdd2 has different UUID to sdc3 md: sdd1 has different UUID to sdc3 md: sdb3 has different UUID to sdc3 md: sdb2 has different UUID to sdc3 md: sdb1 has different UUID to sdc3 md: created md8 md: bind<sdd3> md: bind<sdc3> md: running: <sdc3><sdd3> md/raid1:md8: active with 2 out of 2 mirrors md8: detected capacity change from 0 to 6144196608 md: considering sdc2 ... md: adding sdc2 ... md: sdc1 has different UUID to sdc2 md: sda3 has different UUID to sdc2 md: adding sda2 ... md: sda1 has different UUID to sdc2 md: sde3 has different UUID to sdc2 md: adding sde2 ... md: sde1 has different UUID to sdc2 md: adding sdd2 ... md: sdd1 has different UUID to sdc2 md: sdb3 has different UUID to sdc2 md: adding sdb2 ... md: sdb1 has different UUID to sdc2 md: created md5 md: bind<sdb2> md: bind<sdd2> md: bind<sde2> md: bind<sda2> md: bind<sdc2> md: running: <sdc2><sda2><sde2><sdd2><sdb2> md/raid10:md5: active with 4 out of 4 devices created bitmap (173 pages) for device md5 md5: bitmap initialized from disk: read 11/11 pages, set 0 of 354293 bits md5: detected capacity change from 0 to 743005749248 md: considering sdc1 ... RAID10 conf printout: --- wd:4 rd:4 disk 0, wo:0, o:1, dev:sda2 disk 1, wo:0, o:1, dev:sdb2 disk 2, wo:0, o:1, dev:sdc2 disk 3, wo:0, o:1, dev:sdd2 md: adding sdc1 ... md: sda3 has different UUID to sdc1 md: adding sda1 ... md: sde3 has different UUID to sdc1 md: adding sde1 ... md: adding sdd1 ... md: sdb3 has different UUID to sdc1 md: adding sdb1 ... md: created md0 md: bind<sdb1> md: bind<sdd1> md: bind<sde1> md: bind<sda1> md: bind<sdc1> md: running: <sdc1><sda1><sde1><sdd1><sdb1> md/raid1:md0: active with 5 out of 5 mirrors md0: detected capacity change from 0 to 1003356160 md: considering sda3 ... md: adding sda3 ... md: adding sde3 ... md: adding sdb3 ... md: created md7 md: bind<sdb3> md: bind<sde3> md: bind<sda3> md: running: <sda3><sde3><sdb3> md/raid1:md7: active with 2 out of 2 mirrors md7: detected capacity change from 0 to 6144196608 md: ... autorun DONE. RAID1 conf printout: --- wd:2 rd:2 disk 0, wo:0, o:1, dev:sda3 disk 1, wo:0, o:1, dev:sdb3 md5: unknown partition table kjournald starting. Commit interval 5 seconds EXT3-fs (md5): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 9:5. Freeing unused kernel memory: 476k freed mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! md7: unknown partition table md8: unknown partition table mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! md6: unknown partition table md0: udevd[1126]: renamed network interface eth4 to inside udevd[1202]: renamed network interface eth1 to dmz udevd[1184]: renamed network interface eth2 to t1 udevd[1125]: renamed network interface eth3 to spare udevd[1132]: renamed network interface eth0 to cable hda: UDMA/33 mode selected ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata5.00: configured for UDMA/133 ata5: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata6.00: configured for UDMA/133 ata6: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata5.00: configured for UDMA/133 ata5: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata6.00: configured for UDMA/133 ata6: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata5.00: configured for UDMA/133 ata5: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata6.00: configured for UDMA/133 ata6: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata5.00: configured for UDMA/133 ata5: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata6.00: configured for UDMA/133 ata6: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata5.00: configured for UDMA/133 ata5: EH complete ata6.00: configured for UDMA/133 ata6: EH complete ata5.00: configured for UDMA/133 ata5: EH complete ata6.00: configured for UDMA/133 ata6: EH complete hda: UDMA/33 mode selected ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata5.00: configured for UDMA/133 ata5: EH complete ata6.00: configured for UDMA/133 ata6: EH complete Adding 6000188k swap on /dev/md7. Priority:1 extents:1 across:6000188k Adding 6000188k swap on /dev/md8. Priority:1 extents:1 across:6000188k scsi_verify_blk_ioctl: 832 callbacks suppressed mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! EXT3-fs (md5): using internal journal mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! kjournald starting. Commit interval 5 seconds EXT3-fs (md6): using internal journal EXT3-fs (md6): mounted filesystem with writeback data mode EXT4-fs (sdf1): mounted filesystem with writeback data mode. Opts: data=writeback r8169 0000:02:00.0: inside: link down r8169 0000:02:00.0: inside: link down NOHZ: local_softirq_pending 08 ADDRCONF(NETDEV_UP): inside: link is not ready r8169 0000:02:00.0: inside: link up ADDRCONF(NETDEV_CHANGE): inside: link becomes ready net dmz: Setting full-duplex based on MII#1 link partner capability of 45e1 net cable: Setting full-duplex based on MII#1 link partner capability of 41e1 cable: no IPv6 routers present dmz: no IPv6 routers present inside: no IPv6 routers present postgres (7418): /proc/7418/oom_adj is deprecated, please use /proc/7418/oom_score_adj instead. pps pps0: new PPS source serial3 at ID 0 pps pps0: source "/dev/ttyS3" added pps pps1: new PPS source serial4 at ID 1 pps pps1: source "/dev/ttyS4" added device cable entered promiscuous mode device dmz entered promiscuous mode ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0xe9/0x15c() Hardware name: MS-7376 NETDEV WATCHDOG: inside (r8169): transmit queue 0 timed out Pid: 0, comm: swapper/3 Not tainted 3.4.0-00017-g3df9c78 #152 Call Trace: <IRQ> [<ffffffff81311aba>] ? dev_watchdog+0xe9/0x15c [<ffffffff81024499>] ? warn_slowpath_common+0x71/0x85 [<ffffffff813119d1>] ? netif_tx_lock+0x7a/0x7a [<ffffffff81024511>] ? warn_slowpath_fmt+0x45/0x4a [<ffffffff813119be>] ? netif_tx_lock+0x67/0x7a [<ffffffff81311aba>] ? dev_watchdog+0xe9/0x15c [<ffffffff810345ab>] ? __queue_work+0x20a/0x20a [<ffffffff8102c908>] ? run_timer_softirq+0x17e/0x20b [<ffffffff81028889>] ? __do_softirq+0x80/0x102 [<ffffffff81404b8c>] ? call_softirq+0x1c/0x30 [<ffffffff81003044>] ? do_softirq+0x2c/0x60 [<ffffffff81028abc>] ? irq_exit+0x3a/0x91 [<ffffffff81002e91>] ? do_IRQ+0x81/0x97 [<ffffffff81403327>] ? common_interrupt+0x67/0x67 <EOI> [<ffffffff810079d8>] ? default_idle+0x1e/0x32 [<ffffffff81007afc>] ? amd_e400_idle+0xb7/0xd4 [<ffffffff810081a5>] ? cpu_idle+0x58/0x98 ---[ end trace 7d5a7d21f604b0d8 ]--- r8169 0000:02:00.0: inside: link up r8169 0000:02:00.0: inside: link up r8169 0000:02:00.0: inside: link up r8169 0000:02:00.0: inside: link up r8169 0000:02:00.0: inside: link up r8169 0000:02:00.0: inside: link up r8169 0000:02:00.0: inside: link up r8169 0000:02:00.0: inside: link up r8169 0000:02:00.0: inside: link up r8169 0000:02:00.0: inside: link up TCP: TCP: Possible SYN flooding on port 25. Sending cookies. Check SNMP counters. kjournald starting. Commit interval 5 seconds EXT3-fs (md0): using internal journal EXT3-fs (md0): mounted filesystem with journal data mode r8169 0000:02:00.0: inside: link up r8169 0000:02:00.0: inside: link up UDP: short packet: From yyy.yy.yyy.yy:10995 32496/70 to xx.xxx.xx.xxx:6881 r8169 0000:02:00.0: inside: link up r8169 0000:02:00.0: inside: link up r8169 0000:02:00.0: inside: link up UDP: short packet: From zzz.zzz.zz.zz:29440 21248/181 to xx.xxx.xx.xxx:23552 -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Francois Romieu <romieu@fr.zoreil.com> > You may try the attached patches on top of current -git. A complete dmesg > will be welcome. So will an 'ethtool -d eth0' if the device stops working. > > You did not label the problem as a serious one. Does it means that the > driver automatically recovers ? Same timeout, at 6h20m uptime (dmesg attached), System is 3.4.0 + some completely unrelated local patches (to serial port PPS drivers) + your two patches. System recovers, is operating normally. Thank you for your efforts! Initializing cgroup subsys cpu Linux version 3.4.0-00020-g3579858 ($USER@$HOST) (gcc version 4.7.0 (Debian 4.7.0-9) ) #156 SMP Wed May 23 22:24:39 EDT 2012 Command line: auto BOOT_IMAGE=Amd64 ro root=905 libata.fua=1 acpi_enforce_resources=lax k10temp.force=1 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000093800 (usable) BIOS-e820: 0000000000093800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dffa0000 (usable) BIOS-e820: 00000000dffc0000 - 00000000dffce000 (ACPI data) BIOS-e820: 00000000dffce000 - 00000000dfff0000 (ACPI NVS) BIOS-e820: 00000000dfff0000 - 00000000dfffe000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000220000000 (usable) NX (Execute Disable) protection: active DMI present. DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7376/MS-7376, BIOS V1.7 01/13/2009 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) ie820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x220000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFE0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000220000000 aka 8704M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000e0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xdffa0 max_arch_pfn = 0x400000000 found SMP MP-table at [ffff8800000ff780] ff780 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff880000091000] 91000 size 8192 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000dffa0000 0000000000 - 00c0000000 page 1G 00c0000000 - 00dfe00000 page 2M 00dfe00000 - 00dffa0000 page 4k kernel direct mapping tables up to dffa0000 @ 1fffd000-20000000 init_memory_mapping: 0000000100000000-0000000220000000 0100000000 - 0200000000 page 1G 0200000000 - 0220000000 page 2M kernel direct mapping tables up to 220000000 @ dff9e000-dffa0000 ACPI: RSDP 00000000000f9e30 00014 (v00 ACPIAM) ACPI: RSDT 00000000dffc0000 00038 (v01 011309 RSDT1044 20090113 MSFT 00000097) ACPI: FACP 00000000dffc0200 00084 (v02 011309 FACP1044 20090113 MSFT 00000097) ACPI: DSDT 00000000dffc0440 06E9B (v01 1ADNC 1ADNC001 00000001 INTL 20051117) ACPI: FACS 00000000dffce000 00040 ACPI: APIC 00000000dffc0390 0006C (v01 011309 APIC1044 20090113 MSFT 00000097) ACPI: MCFG 00000000dffc0400 0003C (v01 011309 OEMMCFG 20090113 MSFT 00000097) ACPI: OEMB 00000000dffce040 00071 (v01 011309 OEMB1044 20090113 MSFT 00000097) ACPI: HPET 00000000dffc72e0 00038 (v01 011309 OEMHPET 20090113 MSFT 00000097) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880217600000-ffff88021f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00220000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x00000093 0: 0x00000100 -> 0x000dffa0 0: 0x00100000 -> 0x00220000 On node 0 totalpages: 2096931 DMA zone: 64 pages used for memmap DMA zone: 2 pages reserved DMA zone: 3905 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 896992 pages, LIFO batch:31 Normal zone: 18432 pages used for memmap Normal zone: 1161216 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8300 base: 0xfed00000 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 Allocating PCI resources starting at dfffe000 (gap: dfffe000:1ff02000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 23 pages/cpu @ffff88021fc00000 s72704 r0 d21504 u524288 pcpu-alloc: s72704 r0 d21504 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2062113 Kernel command line: auto BOOT_IMAGE=Amd64 ro root=905 libata.fua=1 acpi_enforce_resources=lax k10temp.force=1 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ d4000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ d4000000 Memory: 8105124k/8912896k available (4126k kernel code, 525172k absent, 282600k reserved, 1952k data, 476k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:712 16 Console: colour VGA+ 80x50 console [tty0] enabled hpet clockevent registered Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using HPET reference calibration Detected 2500.164 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.32 BogoMIPS (lpj=25001640) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks LVT offset 0 assigned for vector 0xf9 using AMD E400 aware idle routine Freeing SMP alternatives: 12k freed ACPI: Core revision 20120320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. NMI watchdog: enabled, takes one hw-pmu counter. Booting Node 0, Processors #1 NMI watchdog: enabled, takes one hw-pmu counter. System has AMD C1E enabled Switch to broadcast mode on CPU1 #2 NMI watchdog: enabled, takes one hw-pmu counter. Switch to broadcast mode on CPU2 #3 Ok. NMI watchdog: enabled, takes one hw-pmu counter. Switch to broadcast mode on CPU3 Brought up 4 CPUs Total of 4 processors activated (20001.31 BogoMIPS). Switch to broadcast mode on CPU0 xor: automatically using best checksumming function: generic_sse generic_sse: 9968.800 MB/sec xor: using function: generic_sse (9968.800 MB/sec) NET: Registered protocol family 16 node 0 link 0: io port [1000, ffffff] TOM: 00000000e0000000 aka 3584M Fam 10h mmconf [mem 0xe0000000-0xefffffff] node 0 link 0: mmio [e0000000, efffffff] ==> none node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [e0000000, dfffffff] ==> none TOM2: 0000000220000000 aka 8704M bus: [00, 07] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xf0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x220000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: not using MMCONFIG PCI: Using configuration type 1 for base access PCI: Using configuration type 1 for extended access bio: create slab <bio-0> at 0 raid6: int64x1 2426 MB/s raid6: int64x2 2127 MB/s raid6: int64x4 2237 MB/s raid6: int64x8 1474 MB/s raid6: sse2x1 3546 MB/s raid6: sse2x2 5429 MB/s raid6: sse2x4 6551 MB/s raid6: using algorithm sse2x4 (6551 MB/s) ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Detected MSI hardware, enabling workarounds. ACPI: EC: Look up EC in DSDT ACPI: Executed 3 blocks of module-level executable AML code ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources ACPI: No dock devices found. PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff] pci 0000:00:00.0: [1002:5956] type 00 class 0x060000 pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] pci 0000:00:02.0: [1002:5978] type 01 class 0x060400 pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:597b] type 01 class 0x060400 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: [1002:597e] type 01 class 0x060400 pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 00 class 0x010601 pci 0000:00:12.0: reg 10: [io 0x7000-0x7007] pci 0000:00:12.0: reg 14: [io 0x6000-0x6003] pci 0000:00:12.0: reg 18: [io 0x5000-0x5007] pci 0000:00:12.0: reg 1c: [io 0x4000-0x4003] pci 0000:00:12.0: reg 20: [io 0x3000-0x300f] pci 0000:00:12.0: reg 24: [mem 0xfe5ff800-0xfe5ffbff] pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xfe5fe000-0xfe5fefff] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 pci 0000:00:13.1: reg 10: [mem 0xfe5fd000-0xfe5fdfff] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 pci 0000:00:13.2: reg 10: [mem 0xfe5fc000-0xfe5fcfff] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 pci 0000:00:13.3: reg 10: [mem 0xfe5fb000-0xfe5fbfff] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 pci 0000:00:13.4: reg 10: [mem 0xfe5fa000-0xfe5fafff] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 pci 0000:00:13.5: reg 10: [mem 0xfe5ff000-0xfe5ff0ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f] pci 0000:00:14.1: [1002:438c] type 00 class 0x01018a pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xfe5f4000-0xfe5f7fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:18.0: [1022:1200] type 00 class 0x060000 pci 0000:00:18.1: [1022:1201] type 00 class 0x060000 pci 0000:00:18.2: [1022:1202] type 00 class 0x060000 pci 0000:00:18.3: [1022:1203] type 00 class 0x060000 pci 0000:00:18.4: [1022:1204] type 00 class 0x060000 pci 0000:01:00.0: [1002:5b60] type 00 class 0x030000 pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfdffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xfe6f0000-0xfe6fffff 64bit] pci 0000:01:00.0: reg 20: [io 0x8000-0x80ff] pci 0000:01:00.0: reg 30: [mem 0xfe6c0000-0xfe6dffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: [1002:5b70] type 00 class 0x038000 pci 0000:01:00.1: reg 10: [mem 0xfe6e0000-0xfe6effff 64bit] pci 0000:01:00.1: supports D1 D2 pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0x8000-0x8fff] pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfdffffff 64bit pref] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 pci 0000:02:00.0: reg 10: [io 0x9800-0x98ff] pci 0000:02:00.0: reg 18: [mem 0xfe7ff000-0xfe7fffff 64bit] pci 0000:02:00.0: reg 30: [mem 0xfe7c0000-0xfe7dffff pref] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:00:05.0: PCI bridge to [bus 02-02] pci 0000:00:05.0: bridge window [io 0x9000-0x9fff] pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:03:00.0: [105a:3f20] type 00 class 0x010400 pci 0000:03:00.0: reg 10: [io 0xa800-0xa87f] pci 0000:03:00.0: reg 18: [io 0xa400-0xa4ff] pci 0000:03:00.0: reg 1c: [mem 0xfe8ff000-0xfe8fffff] pci 0000:03:00.0: reg 20: [mem 0xfe8c0000-0xfe8dffff] pci 0000:03:00.0: reg 24: [mem 0xfe8fc000-0xfe8fdfff] pci 0000:03:00.0: supports D1 pci 0000:00:09.0: PCI bridge to [bus 03-03] pci 0000:00:09.0: bridge window [io 0xa000-0xafff] pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:04:00.0: [1106:3044] type 00 class 0x0c0010 pci 0000:04:00.0: reg 10: [mem 0xfe9ff800-0xfe9fffff] pci 0000:04:00.0: reg 14: [io 0xc800-0xc87f] pci 0000:04:00.0: supports D2 pci 0000:04:00.0: PME# supported from D2 D3hot D3cold pci 0000:04:02.0: [1415:9501] type 00 class 0x070006 pci 0000:04:02.0: reg 10: [io 0xc400-0xc41f] pci 0000:04:02.0: reg 14: [mem 0xfe9fe000-0xfe9fefff] pci 0000:04:02.0: reg 18: [io 0xc000-0xc01f] pci 0000:04:02.0: reg 1c: [mem 0xfe9fd000-0xfe9fdfff] pci 0000:04:02.0: supports D2 pci 0000:04:02.0: PME# supported from D0 D2 D3hot pci 0000:04:02.1: [1415:9513] type 00 class 0x070101 pci 0000:04:02.1: reg 10: [io 0xb800-0xb807] pci 0000:04:02.1: reg 14: [io 0xb400-0xb407] pci 0000:04:02.1: reg 18: [io 0xb000-0xb01f] pci 0000:04:02.1: reg 1c: [mem 0xfe9fc000-0xfe9fcfff] pci 0000:04:02.1: supports D2 pci 0000:04:02.1: PME# supported from D0 D2 D3hot pci 0000:04:03.0: [1011:0024] type 01 class 0x060400 pci 0000:00:14.4: PCI bridge to [bus 04-05] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xb000-0xefff] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfebfffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode) pci 0000:05:04.0: [1011:0019] type 00 class 0x020000 pci 0000:05:04.0: reg 10: [io 0xe800-0xe87f] pci 0000:05:04.0: reg 14: [mem 0xfebffc00-0xfebfffff] pci 0000:05:04.0: reg 30: [mem 0xfeb80000-0xfebbffff pref] pci 0000:05:05.0: [1011:0019] type 00 class 0x020000 pci 0000:05:05.0: reg 10: [io 0xe400-0xe47f] pci 0000:05:05.0: reg 14: [mem 0xfebff800-0xfebffbff] pci 0000:05:05.0: reg 30: [mem 0xfeb40000-0xfeb7ffff pref] pci 0000:05:06.0: [1011:0019] type 00 class 0x020000 pci 0000:05:06.0: reg 10: [io 0xe000-0xe07f] pci 0000:05:06.0: reg 14: [mem 0xfebff400-0xfebff7ff] pci 0000:05:06.0: reg 30: [mem 0xfeb00000-0xfeb3ffff pref] pci 0000:05:07.0: [1011:0019] type 00 class 0x020000 pci 0000:05:07.0: reg 10: [io 0xd800-0xd87f] pci 0000:05:07.0: reg 14: [mem 0xfebff000-0xfebff3ff] pci 0000:05:07.0: reg 30: [mem 0xfeac0000-0xfeafffff pref] pci 0000:04:03.0: PCI bridge to [bus 05-05] pci 0000:04:03.0: bridge window [io 0xd000-0xefff] pci 0000:04:03.0: bridge window [mem 0xfea00000-0xfebfffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs *9) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 10 11 12 14 15) vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:00.0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered Advanced Linux Sound Architecture Driver Version 1.0.25. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:00.0: no compatible bridge window for [mem 0xe0000000-0xffffffff 64bit] reserve RAM buffer: 0000000000093800 - 000000000009ffff reserve RAM buffer: 00000000dffa0000 - 00000000dfffffff hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [bus 00-ff] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000d0000-0x000dffff window] pnp 00:00: [mem 0xe0000000-0xdfffffff window disabled] pnp 00:00: [mem 0xf0000000-0xfebfffff window] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:01: [dma 4] pnp 00:01: [io 0x0000-0x000f] pnp 00:01: [io 0x0081-0x0083] pnp 00:01: [io 0x0087] pnp 00:01: [io 0x0089-0x008b] pnp 00:01: [io 0x008f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [io 0x0070-0x0071] pnp 00:02: [irq 8] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:03: [io 0x0061] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:04: [io 0x00f0-0x00ff] pnp 00:04: [irq 13] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x03f8-0x03ff] pnp 00:05: [irq 4] pnp 00:05: [dma 0 disabled] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) pnp 00:06: [io 0x03f0-0x03f5] pnp 00:06: [io 0x03f7] pnp 00:06: [irq 6] pnp 00:06: [dma 2] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) pnp 00:07: [mem 0xfed00000-0xfed003ff] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:08: [mem 0xfec00000-0xfec00fff] pnp 00:08: [mem 0xfee00000-0xfee00fff] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x003f] pnp 00:09: [io 0x0062-0x0063] pnp 00:09: [io 0x0065-0x006f] pnp 00:09: [io 0x0072-0x007f] pnp 00:09: [io 0x0080] pnp 00:09: [io 0x0084-0x0086] pnp 00:09: [io 0x0088] pnp 00:09: [io 0x008c-0x008e] pnp 00:09: [io 0x0090-0x009f] pnp 00:09: [io 0x00a2-0x00bf] pnp 00:09: [io 0x00b1] pnp 00:09: [io 0x00e0-0x00ef] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cd1] pnp 00:09: [io 0x0cd2-0x0cd3] pnp 00:09: [io 0x0cd4-0x0cd5] pnp 00:09: [io 0x0cd6-0x0cd7] pnp 00:09: [io 0x0cd8-0x0cdf] pnp 00:09: [io 0x0800-0x089f] pnp 00:09: [io 0x0b10-0x0b1f] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled] pnp 00:09: [io 0x0900-0x090f] pnp 00:09: [io 0x0910-0x091f] pnp 00:09: [io 0xfe00-0xfefe] pnp 00:09: [mem 0xffb80000-0xffbfffff] system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cd1] has been reserved system 00:09: [io 0x0cd2-0x0cd3] has been reserved system 00:09: [io 0x0cd4-0x0cd5] has been reserved system 00:09: [io 0x0cd6-0x0cd7] has been reserved system 00:09: [io 0x0cd8-0x0cdf] has been reserved system 00:09: [io 0x0800-0x089f] has been reserved system 00:09: [io 0x0b10-0x0b1f] has been reserved system 00:09: [io 0x0900-0x090f] has been reserved system 00:09: [io 0x0910-0x091f] has been reserved system 00:09: [io 0xfe00-0xfefe] has been reserved system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [io 0x0060] pnp 00:0a: [io 0x0064] pnp 00:0a: [irq 1] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) pnp 00:0b: [irq 12] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active) pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled] pnp 00:0c: [io 0x0600-0x06df] pnp 00:0c: [io 0x0ae0-0x0aef] system 00:0c: [io 0x0600-0x06df] has been reserved system 00:0c: [io 0x0ae0-0x0aef] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0d: [mem 0xe0000000-0xefffffff] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0e: [mem 0x00000000-0x0009ffff] pnp 00:0e: [mem 0x000c0000-0x000cffff] pnp 00:0e: [mem 0x000e0000-0x000fffff] pnp 00:0e: [mem 0x00100000-0xdfffffff] pnp 00:0e: [mem 0xfec00000-0xffffffff] pnp 00:0e: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0e: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0e: disabling [mem 0x000e0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:0e: disabling [mem 0x00100000-0xdfffffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] system 00:0e: [mem 0xfec00000-0xffffffff] could not be reserved system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0x8000-0x8fff] pci 0000:00:02.0: bridge window [mem 0xfe600000-0xfe6fffff] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfdffffff 64bit pref] pci 0000:00:05.0: PCI bridge to [bus 02-02] pci 0000:00:05.0: bridge window [io 0x9000-0x9fff] pci 0000:00:05.0: bridge window [mem 0xfe700000-0xfe7fffff] pci 0000:00:09.0: PCI bridge to [bus 03-03] pci 0000:00:09.0: bridge window [io 0xa000-0xafff] pci 0000:00:09.0: bridge window [mem 0xfe800000-0xfe8fffff] pci 0000:04:03.0: PCI bridge to [bus 05-05] pci 0000:04:03.0: bridge window [io 0xd000-0xefff] pci 0000:04:03.0: bridge window [mem 0xfea00000-0xfebfffff] pci 0000:00:14.4: PCI bridge to [bus 04-05] pci 0000:00:14.4: bridge window [io 0xb000-0xefff] pci 0000:00:14.4: bridge window [mem 0xfe900000-0xfebfffff] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfebfffff] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff] pci_bus 0000:01: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] pci_bus 0000:04: resource 0 [io 0xb000-0xefff] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfebfffff] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff] pci_bus 0000:04: resource 8 [mem 0xf0000000-0xfebfffff] pci_bus 0000:05: resource 0 [io 0xd000-0xefff] pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfebfffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 4096 (order: 5, 131072 bytes) UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ d4000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture LVT offset 1 assigned for vector 0x400 IBS: LVT offset 1 assigned perf: AMD IBS detected (0x00000007) Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 15959 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) ACPI: duty_cycle spans bit 4 ACPI: processor limited to max C-state 1 Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS4: detected caps 00000700 should be 00000500 0000:04:02.0: ttyS4 at I/O 0xc400 (irq = 22) is a 16C950/954 ttyS1: detected caps 00000700 should be 00000500 0000:04:02.0: ttyS1 at I/O 0xc408 (irq = 22) is a 16C950/954 ttyS2: detected caps 00000700 should be 00000500 0000:04:02.0: ttyS2 at I/O 0xc410 (irq = 22) is a 16C950/954 ttyS3: detected caps 00000700 should be 00000500 0000:04:02.0: ttyS3 at I/O 0xc418 (irq = 22) is a 16C950/954 lp: driver loaded but no devices found Linux agpgart interface v0.103 PCI parallel port detected: 1415:9513, I/O at 0xb800(0x0), IRQ 23 parport0: PC-style at 0xb800, irq 23 [PCSPP] lp0: using parport0 (interrupt-driven). Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: module loaded Uniform Multi-Platform E-IDE driver atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev 0x00) atiixp 0000:00:14.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xff00-0xff07 Probing IDE interface ide0... Refined TSC clocksource calibration: 2500.174 MHz. Switching to clocksource tsc hda: _NEC DVD_RW ND-3540A, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/33 mode selected ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache cdrom: Uniform CD-ROM driver Revision: 3.20 ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: MSI K9A2 Platinum: enabling 64bit DMA ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe5ff800 port 0xfe5ff900 irq 22 ata2: SATA max UDMA/133 abar m1024@0xfe5ff800 port 0xfe5ff980 irq 22 ata3: SATA max UDMA/133 abar m1024@0xfe5ff800 port 0xfe5ffa00 irq 22 ata4: SATA max UDMA/133 abar m1024@0xfe5ff800 port 0xfe5ffa80 irq 22 ahci 0000:03:00.0: PDC42819 can only drive SATA devices with this driver ahci 0000:03:00.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode ahci 0000:03:00.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc scsi4 : ahci scsi5 : ahci scsi6 : ahci scsi7 : ahci ata5: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc100 irq 17 ata6: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc180 irq 17 ata7: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc200 irq 17 ata8: SATA max UDMA/133 abar m8192@0xfe8fc000 port 0xfe8fc280 irq 17 Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007) tulip0: EEPROM default media type Autosense tulip0: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block tulip0: MII transceiver #1 config 3100 status 7869 advertising 01e1 net eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebffc00, 00:80:c8:b9:c1:d5, IRQ 21 tulip1: EEPROM default media type Autosense tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block tulip1: MII transceiver #1 config 3100 status 7869 advertising 01e1 net eth1: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebff800, 00:80:c8:b9:c1:d6, IRQ 22 tulip2: EEPROM default media type Autosense tulip2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block tulip2: MII transceiver #1 config 3100 status 7849 advertising 01e1 net eth2: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebff400, 00:80:c8:b9:c1:d7, IRQ 23 tulip3: EEPROM default media type Autosense tulip3: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block tulip3: MII transceiver #1 config 3100 status 7869 advertising 01e1 net eth3: Digital DS21142/43 Tulip rev 65 at MMIO 0xfebff000, 00:80:c8:b9:c1:d8, IRQ 20 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: irq 40 for MSI/MSI-X r8169 0000:02:00.0: eth4: RTL8168b/8111b at 0xffffc90000020000, 00:21:85:16:51:7f, XID 18000000 IRQ 40 r8169 0000:02:00.0: eth4: jumbo features [frames: 4080 bytes, tx checksumming: ko] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe5ff000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe5fe000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe5fd000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe5fc000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe5fb000 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata7: SATA link down (SStatus 0 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata8: SATA link down (SStatus 0 SControl 300) ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata6.00: ATA-8: Hitachi HDS5C3020ALA632, ML6OA580, max UDMA/133 ata3.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata2.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata2.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata1.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata5.00: ATA-8: ST3750330AS, SD1A, max UDMA/133 ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata6.00: configured for UDMA/133 ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata2.00: SB600 AHCI: limiting to 255 sectors per cmd scsi 0:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 ata2.00: configured for UDMA/133 ata5.00: configured for UDMA/133 sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 1:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 scsi 2:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 scsi 3:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdd] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 3:0:0:0: [sdd] Write Protect is off sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA scsi 4:0:0:0: Direct-Access ATA ST3750330AS SD1A PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] 1465149168 512-byte logical blocks: (750 GB/698 GiB) sd 4:0:0:0: [sde] Write Protect is off sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 scsi 5:0:0:0: Direct-Access ATA Hitachi HDS5C302 ML6O PQ: 0 ANSI: 5 sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdf] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) sd 5:0:0:0: [sdf] Write Protect is off sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 10 sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA sdf: sdf1 sd 5:0:0:0: [sdf] Attached SCSI disk sdb: sdb1 sdb2 sdb3 sdb4 sd 1:0:0:0: [sdb] Attached SCSI disk sdc: sdc1 sdc2 sdc3 sdc4 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe5fa000 sd 2:0:0:0: [sdc] Attached SCSI disk sdd: sdd1 sdd2 sdd3 sdd4 sd 3:0:0:0: [sdd] Attached SCSI disk sda: sda1 sda2 sda3 sda4 sde: sde1 sde2 sde3 sde4 sd 0:0:0:0: [sda] Attached SCSI disk sd 4:0:0:0: [sde] Attached SCSI disk hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core usbcore: registered new interface driver pl2303 USB Serial support registered for pl2303 i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:02: RTC can wake from S4 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs i2c /dev entries driver ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120320/utaddress-251) ACPI: This conflict may cause random problems and system instability ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 pps_ldisc: PPS line discipline registered f71882fg: Found f71882fg chip at 0x600, revision 32 ACPI Warning: 0x0000000000000600-0x0000000000000607 SystemIO conflicts with Region \HMOR 1 (20120320/utaddress-251) ACPI: This conflict may cause random problems and system instability ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver f71882fg f71882fg.1536: Fan: 1 is in duty-cycle mode f71882fg f71882fg.1536: Fan: 2 is in duty-cycle mode f71882fg f71882fg.1536: Fan: 3 is in duty-cycle mode f71882fg f71882fg.1536: Fan: 4 is in duty-cycle mode k10temp 0000:00:18.3: unreliable CPU thermal sensor; check erratum 319 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid10 personality registered for level 10 md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 EDAC MC: Ver: 2.1.0 AMD64 EDAC driver v3.4.0 EDAC amd64: DRAM ECC disabled. EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver GACT probability on netem: version 1.3 u32 classifier Actions configured Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ctnetlink v0.93: registering with nfnetlink. NF_TPROXY: Transparent proxy support initialized, version 4.1.0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. ip_set: protocol 6 IPv4 over IPv4 tunneling driver ip_tables: (C) 2000-2006 Netfilter Core Team TCP: bic registered TCP: cubic registered TCP: westwood registered TCP: highspeed registered TCP: hybla registered TCP: htcp registered TCP: vegas registered TCP: veno registered TCP: scalable registered TCP: lp registered TCP: yeah registered TCP: illinois registered Initializing XFRM netlink socket NET: Registered protocol family 10 ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 NET: Registered protocol family 15 Bridge firewalling registered 8021q: 802.1Q VLAN Support v1.8 registered taskstats version 1 rtc_cmos 00:02: setting system clock to 2012-05-24 02:27:33 UTC (1337826453) powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor (4 cpu cores) (version 2.20.00) [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [Firmware Bug]: powernow-k8: Try again with latest BIOS. ALSA device list: #0: HDA ATI SB at 0xfe5f4000 irq 16 usb 6-2: new low-speed USB device number 2 using ohci_hcd input: HID 0430:0100 as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1 generic-usb 0003:0430:0100.0001: input: USB HID v1.00 Mouse [HID 0430:0100] on usb-0000:00:13.4-2/input0 input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input2 md: Waiting for all devices to be available before autodetect md: If you don't use raid, use raid=noautodetect md: Autodetecting RAID arrays. md: Scanned 20 and added 20 devices. md: autorun ... md: considering sde4 ... md: adding sde4 ... md: sde3 has different UUID to sde4 md: sde2 has different UUID to sde4 md: sde1 has different UUID to sde4 md: adding sda4 ... md: sda3 has different UUID to sde4 md: sda2 has different UUID to sde4 md: sda1 has different UUID to sde4 md: adding sdd4 ... md: sdd3 has different UUID to sde4 md: sdd2 has different UUID to sde4 md: sdd1 has different UUID to sde4 md: adding sdc4 ... md: sdc3 has different UUID to sde4 md: sdc2 has different UUID to sde4 md: sdc1 has different UUID to sde4 md: adding sdb4 ... md: sdb3 has different UUID to sde4 md: sdb2 has different UUID to sde4 md: sdb1 has different UUID to sde4 md: created md6 md: bind<sdb4> md: bind<sdc4> md: bind<sdd4> md: bind<sda4> md: bind<sde4> md: running: <sde4><sda4><sdd4><sdc4><sdb4> bio: create slab <bio-1> at 1 md/raid:md6: device sde4 operational as raid disk 4 md/raid:md6: device sda4 operational as raid disk 0 md/raid:md6: device sdd4 operational as raid disk 3 md/raid:md6: device sdc4 operational as raid disk 2 md/raid:md6: device sdb4 operational as raid disk 1 md/raid:md6: allocated 5350kB md/raid:md6: raid level 5 active with 5 out of 5 devices, algorithm 2 RAID conf printout: --- level:5 rd:5 wd:5 disk 0, o:1, dev:sda4 disk 1, o:1, dev:sdb4 disk 2, o:1, dev:sdc4 disk 3, o:1, dev:sdd4 disk 4, o:1, dev:sde4 created bitmap (173 pages) for device md6 md6: bitmap initialized from disk: read 11/11 pages, set 0 of 354293 bits md6: detected capacity change from 0 to 1486011498496 md: considering sde3 ... md: adding sde3 ... md: sde2 has different UUID to sde3 md: sde1 has different UUID to sde3 md: adding sda3 ... md: sda2 has different UUID to sde3 md: sda1 has different UUID to sde3 md: sdd3 has different UUID to sde3 md: sdd2 has different UUID to sde3 md: sdd1 has different UUID to sde3 md: sdc3 has different UUID to sde3 md: sdc2 has different UUID to sde3 md: sdc1 has different UUID to sde3 md: adding sdb3 ... md: sdb2 has different UUID to sde3 md: sdb1 has different UUID to sde3 md: created md7 md: bind<sdb3> md: bind<sda3> md: bind<sde3> md: running: <sde3><sda3><sdb3> md/raid1:md7: active with 2 out of 2 mirrors md7: detected capacity change from 0 to 6144196608 md: considering sde2 ... RAID1 conf printout: --- wd:2 rd:2 disk 0, wo:0, o:1, dev:sda3 disk 1, wo:0, o:1, dev:sdb3 md: adding sde2 ... md: sde1 has different UUID to sde2 md: adding sda2 ... md: sda1 has different UUID to sde2 md: sdd3 has different UUID to sde2 md: adding sdd2 ... md: sdd1 has different UUID to sde2 md: sdc3 has different UUID to sde2 md: adding sdc2 ... md: sdc1 has different UUID to sde2 md: adding sdb2 ... md: sdb1 has different UUID to sde2 md: created md5 md: bind<sdb2> md: bind<sdc2> md: bind<sdd2> md: bind<sda2> md: bind<sde2> md: running: <sde2><sda2><sdd2><sdc2><sdb2> md/raid10:md5: active with 4 out of 4 devices created bitmap (173 pages) for device md5 md5: bitmap initialized from disk: read 11/11 pages, set 0 of 354293 bits md5: detected capacity change from 0 to 743005749248 md: considering sde1 ... RAID10 conf printout: --- wd:4 rd:4 disk 0, wo:0, o:1, dev:sda2 disk 1, wo:0, o:1, dev:sdb2 disk 2, wo:0, o:1, dev:sdc2 disk 3, wo:0, o:1, dev:sdd2 md: adding sde1 ... md: adding sda1 ... md: sdd3 has different UUID to sde1 md: adding sdd1 ... md: sdc3 has different UUID to sde1 md: adding sdc1 ... md: adding sdb1 ... md: created md0 md: bind<sdb1> md: bind<sdc1> md: bind<sdd1> md: bind<sda1> md: bind<sde1> md: running: <sde1><sda1><sdd1><sdc1><sdb1> md/raid1:md0: active with 5 out of 5 mirrors md0: detected capacity change from 0 to 1003356160 md: considering sdd3 ... md: adding sdd3 ... md: adding sdc3 ... md: created md8 md: bind<sdc3> md: bind<sdd3> md: running: <sdd3><sdc3> md/raid1:md8: active with 2 out of 2 mirrors md8: detected capacity change from 0 to 6144196608 md: ... autorun DONE. md5: unknown partition table kjournald starting. Commit interval 5 seconds EXT3-fs (md5): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 9:5. Freeing unused kernel memory: 476k freed mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! md8: unknown partition table mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! md6: unknown partition table mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! md7: unknown partition table md0: udevd[1132]: renamed network interface eth4 to inside udevd[1151]: renamed network interface eth0 to cable udevd[1141]: renamed network interface eth1 to dmz udevd[1155]: renamed network interface eth2 to t1 udevd[1156]: renamed network interface eth3 to spare hda: UDMA/33 mode selected ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata5.00: configured for UDMA/133 ata5: EH complete ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata5.00: configured for UDMA/133 ata5: EH complete ata6.00: configured for UDMA/133 ata6: EH complete hda: UDMA/33 mode selected ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/133 ata1: EH complete ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: SB600 AHCI: limiting to 255 sectors per cmd ata2.00: configured for UDMA/133 ata2: EH complete ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: SB600 AHCI: limiting to 255 sectors per cmd ata3.00: configured for UDMA/133 ata3: EH complete ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: SB600 AHCI: limiting to 255 sectors per cmd ata4.00: configured for UDMA/133 ata4: EH complete ata5.00: configured for UDMA/133 ata5: EH complete ata6.00: configured for UDMA/133 ata6: EH complete Adding 6000188k swap on /dev/md7. Priority:1 extents:1 across:6000188k Adding 6000188k swap on /dev/md8. Priority:1 extents:1 across:6000188k scsi_verify_blk_ioctl: 562 callbacks suppressed mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! EXT3-fs (md5): using internal journal mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! mdadm: sending ioctl 1261 to a partition! kjournald starting. Commit interval 5 seconds EXT3-fs (md6): using internal journal EXT3-fs (md6): mounted filesystem with writeback data mode EXT4-fs (sdf1): mounted filesystem with writeback data mode. Opts: data=writeback r8169 0000:02:00.0: inside: link down r8169 0000:02:00.0: inside: link down NOHZ: local_softirq_pending 08 ADDRCONF(NETDEV_UP): inside: link is not ready r8169 0000:02:00.0: inside: link up ADDRCONF(NETDEV_CHANGE): inside: link becomes ready net dmz: Setting full-duplex based on MII#1 link partner capability of 45e1 net cable: Setting full-duplex based on MII#1 link partner capability of 41e1 cable: no IPv6 routers present dmz: no IPv6 routers present inside: no IPv6 routers present postgres (4955): /proc/4955/oom_adj is deprecated, please use /proc/4955/oom_score_adj instead. pps pps0: new PPS source serial3 at ID 0 pps pps0: source "/dev/ttyS3" added pps pps1: new PPS source serial4 at ID 1 pps pps1: source "/dev/ttyS4" added device cable entered promiscuous mode device dmz entered promiscuous mode UDP: bad checksum. From yyy.yy.yyy.yy:1215 to xx.xxx.xx.xxx:62901 ulen 38 UDP: short packet: From zzz.zzz.zz.zz:1400 49320/143 to xx.xxx.xx.xxx:6881 ------------[ cut here ]------------ WARNING: at net/sched/sch_generic.c:256 dev_watchdog+0xe9/0x15c() Hardware name: MS-7376 NETDEV WATCHDOG: inside (r8169): transmit queue 0 timed out Pid: 0, comm: swapper/3 Not tainted 3.4.0-00020-g3579858 #156 Call Trace: <IRQ> [<ffffffff813122ba>] ? dev_watchdog+0xe9/0x15c [<ffffffff810249a1>] ? warn_slowpath_common+0x71/0x85 [<ffffffff813121d1>] ? netif_tx_lock+0x7a/0x7a [<ffffffff81024a19>] ? warn_slowpath_fmt+0x45/0x4a [<ffffffff813121be>] ? netif_tx_lock+0x67/0x7a [<ffffffff813122ba>] ? dev_watchdog+0xe9/0x15c [<ffffffff8102ce10>] ? run_timer_softirq+0x17e/0x20b [<ffffffff81028d91>] ? __do_softirq+0x80/0x102 [<ffffffff8140550c>] ? call_softirq+0x1c/0x30 [<ffffffff81003300>] ? do_softirq+0x2c/0x60 [<ffffffff81028fc4>] ? irq_exit+0x3a/0x91 [<ffffffff8100314d>] ? do_IRQ+0x81/0x97 [<ffffffff81403b27>] ? common_interrupt+0x67/0x67 <EOI> [<ffffffff81007c94>] ? default_idle+0x1e/0x32 [<ffffffff81007db8>] ? amd_e400_idle+0xb7/0xd4 [<ffffffff81008461>] ? cpu_idle+0x58/0x98 ---[ end trace 14c35d45980e4004 ]--- r8169 0000:02:00.0: inside: link up -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 00b4f56..01f3367 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -5345,7 +5345,7 @@ static void rtl8169_unmap_tx_skb(struct device *d, struct ring_info *tx_skb, dma_unmap_single(d, le64_to_cpu(desc->addr), len, DMA_TO_DEVICE); - desc->opts1 = 0x00; + desc->opts1 &= cpu_to_le32(RingEnd); desc->opts2 = 0x00; desc->addr = 0x00; tx_skb->len = 0;