Patchwork [08/11] sparc: unify signal.h

login
register
mail settings
Submitter Sam Ravnborg
Date Dec. 29, 2008, 11:58 p.m.
Message ID <1230595090-23982-8-git-send-email-sam@ravnborg.org>
Download mbox | patch
Permalink /patch/16010/
State Accepted
Delegated to: David Miller
Headers show

Comments

Sam Ravnborg - Dec. 29, 2008, 11:58 p.m.
They were almost identical and with the preapration
patch nothing was needed to be added.

The unified version contains a few sparc64 only definitions
but they are kept as is and not protected by ifdef/endif.
The unified version exports a bit more to userspace then the
32 bit version did.
This is not considered fatal.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
---
 arch/sparc/include/asm/Kbuild      |    2 -
 arch/sparc/include/asm/signal.h    |  212 +++++++++++++++++++++++++++++++++++-
 arch/sparc/include/asm/signal_32.h |  207 -----------------------------------
 arch/sparc/include/asm/signal_64.h |  210 -----------------------------------
 4 files changed, 207 insertions(+), 424 deletions(-)
 delete mode 100644 arch/sparc/include/asm/signal_32.h
 delete mode 100644 arch/sparc/include/asm/signal_64.h
David Miller - Jan. 3, 2009, 3:21 a.m.
From: Sam Ravnborg <sam@ravnborg.org>
Date: Tue, 30 Dec 2008 00:58:07 +0100

> They were almost identical and with the preapration
> patch nothing was needed to be added.
> 
> The unified version contains a few sparc64 only definitions
> but they are kept as is and not protected by ifdef/endif.
> The unified version exports a bit more to userspace then the
> 32 bit version did.
> This is not considered fatal.
> 
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

Also applied, thanks Sam.
--
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
index 46d3704..1612229 100644
--- a/arch/sparc/include/asm/Kbuild
+++ b/arch/sparc/include/asm/Kbuild
@@ -7,8 +7,6 @@  header-y += sigcontext_32.h
 header-y += sigcontext_64.h
 header-y += siginfo_32.h
 header-y += siginfo_64.h
-header-y += signal_32.h
-header-y += signal_64.h
 
 header-y += apc.h
 header-y += asi.h
diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h
index 27ab05d..41535e7 100644
--- a/arch/sparc/include/asm/signal.h
+++ b/arch/sparc/include/asm/signal.h
@@ -1,8 +1,210 @@ 
-#ifndef ___ASM_SPARC_SIGNAL_H
-#define ___ASM_SPARC_SIGNAL_H
-#if defined(__sparc__) && defined(__arch64__)
-#include <asm/signal_64.h>
+#ifndef __SPARC_SIGNAL_H
+#define __SPARC_SIGNAL_H
+
+#include <asm/sigcontext.h>
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/personality.h>
+#include <linux/types.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define    SUBSIG_STACK       0
+#define    SUBSIG_ILLINST     2
+#define    SUBSIG_PRIVINST    3
+#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
+
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+
+#define SIGEMT           7
+#define    SUBSIG_TAG    10
+
+#define SIGFPE		 8
+#define    SUBSIG_FPDISABLED     0x400
+#define    SUBSIG_FPERROR        0x404
+#define    SUBSIG_FPINTOVFL      0x001
+#define    SUBSIG_FPSTSIG        0x002
+#define    SUBSIG_IDIVZERO       0x014
+#define    SUBSIG_FPINEXACT      0x0c4
+#define    SUBSIG_FPDIVZERO      0x0c8
+#define    SUBSIG_FPUNFLOW       0x0cc
+#define    SUBSIG_FPOPERROR      0x0d0
+#define    SUBSIG_FPOVFLOW       0x0d4
+
+#define SIGKILL		 9
+#define SIGBUS          10
+#define    SUBSIG_BUSTIMEOUT    1
+#define    SUBSIG_ALIGNMENT     2
+#define    SUBSIG_MISCERROR     5
+
+#define SIGSEGV		11
+#define    SUBSIG_NOMAPPING     3
+#define    SUBSIG_PROTECTION    4
+#define    SUBSIG_SEGERROR      5
+
+#define SIGSYS		12
+
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGURG          16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP		17
+#define SIGTSTP		18
+#define SIGCONT		19
+#define SIGCHLD		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGIO		23
+#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGLOST		29
+#define SIGPWR		SIGLOST
+#define SIGUSR1		30
+#define SIGUSR2		31
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define __OLD_NSIG	32
+#define __NEW_NSIG      64
+#define _NSIG_BPW       64
+#define _NSIG_WORDS     (__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN       32
+#define SIGRTMAX       __NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define _NSIG			__NEW_NSIG
+#define __new_sigset_t		sigset_t
+#define __new_sigaction		sigaction
+#define __new_sigaction32	sigaction32
+#define __old_sigset_t		old_sigset_t
+#define __old_sigaction		old_sigaction
+#define __old_sigaction32	old_sigaction32
 #else
-#include <asm/signal_32.h>
+#define _NSIG			__OLD_NSIG
+#define NSIG			_NSIG
+#define __old_sigset_t		sigset_t
+#define __old_sigaction		sigaction
+#define __old_sigaction32	sigaction32
 #endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t;            /* at least 32 bits */
+
+typedef struct {
+       unsigned long sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+/* A SunOS sigstack */
+struct sigstack {
+	/* XXX 32-bit pointers pinhead XXX */
+	char *the_stack;
+	int   cur_status;
+};
+
+/* Sigvec flags */
+#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
+#define _SV_INTR      2u    /* Sig return should not restart system call */
+#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ */
+#define SA_NOCLDSTOP	_SV_IGNCHILD
+#define SA_STACK	_SV_SSTACK
+#define SA_ONSTACK	_SV_SSTACK
+#define SA_RESTART	_SV_INTR
+#define SA_ONESHOT	_SV_RESET
+#define SA_NOMASK	0x20u
+#define SA_NOCLDWAIT    0x100u
+#define SA_SIGINFO      0x200u
+
+
+#define SIG_BLOCK          0x01	/* for blocking signals */
+#define SIG_UNBLOCK        0x02	/* for unblocking signals */
+#define SIG_SETMASK        0x04	/* for setting the signal mask */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	4096
+#define SIGSTKSZ	16384
+
+#ifdef __KERNEL__
+/*
+ * DJHR
+ * SA_STATIC_ALLOC is used for the sparc32 system to indicate that this
+ * interrupt handler's irq structure should be statically allocated
+ * by the request_irq routine.
+ * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
+ * of interrupt usage and that sucks. Also without a flag like this
+ * it may be possible for the free_irq routine to attempt to free
+ * statically allocated data.. which is NOT GOOD.
+ *
+ */
+#define SA_STATIC_ALLOC         0x8000
 #endif
+
+#include <asm-generic/signal.h>
+
+struct __new_sigaction {
+	__sighandler_t		sa_handler;
+	unsigned long		sa_flags;
+	__sigrestore_t		sa_restorer;  /* not used by Linux/SPARC yet */
+	__new_sigset_t		sa_mask;
+};
+
+struct __old_sigaction {
+	__sighandler_t		sa_handler;
+	__old_sigset_t		sa_mask;
+	unsigned long		sa_flags;
+	void			(*sa_restorer)(void);  /* not used by Linux/SPARC yet */
+};
+
+typedef struct sigaltstack {
+	void			__user *ss_sp;
+	int			ss_flags;
+	size_t			ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+struct k_sigaction {
+	struct			__new_sigaction sa;
+	void			__user *ka_restorer;
+};
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/signal_32.h b/arch/sparc/include/asm/signal_32.h
deleted file mode 100644
index 96a60ab..0000000
--- a/arch/sparc/include/asm/signal_32.h
+++ /dev/null
@@ -1,207 +0,0 @@ 
-#ifndef _ASMSPARC_SIGNAL_H
-#define _ASMSPARC_SIGNAL_H
-
-#include <asm/sigcontext.h>
-#include <linux/compiler.h>
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#include <linux/personality.h>
-#include <linux/types.h>
-#endif
-#endif
-
-/* On the Sparc the signal handlers get passed a 'sub-signal' code
- * for certain signal types, which we document here.
- */
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define    SUBSIG_STACK       0
-#define    SUBSIG_ILLINST     2
-#define    SUBSIG_PRIVINST    3
-#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
-
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-
-#define SIGEMT           7
-#define    SUBSIG_TAG    10
-
-#define SIGFPE		 8
-#define    SUBSIG_FPDISABLED     0x400
-#define    SUBSIG_FPERROR        0x404
-#define    SUBSIG_FPINTOVFL      0x001
-#define    SUBSIG_FPSTSIG        0x002
-#define    SUBSIG_IDIVZERO       0x014
-#define    SUBSIG_FPINEXACT      0x0c4
-#define    SUBSIG_FPDIVZERO      0x0c8
-#define    SUBSIG_FPUNFLOW       0x0cc
-#define    SUBSIG_FPOPERROR      0x0d0
-#define    SUBSIG_FPOVFLOW       0x0d4
-
-#define SIGKILL		 9
-#define SIGBUS          10
-#define    SUBSIG_BUSTIMEOUT    1
-#define    SUBSIG_ALIGNMENT     2
-#define    SUBSIG_MISCERROR     5
-
-#define SIGSEGV		11
-#define    SUBSIG_NOMAPPING     3
-#define    SUBSIG_PROTECTION    4
-#define    SUBSIG_SEGERROR      5
-
-#define SIGSYS		12
-
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGURG          16
-
-/* SunOS values which deviate from the Linux/i386 ones */
-#define SIGSTOP		17
-#define SIGTSTP		18
-#define SIGCONT		19
-#define SIGCHLD		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGIO		23
-#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGLOST		29
-#define SIGPWR		SIGLOST
-#define SIGUSR1		30
-#define SIGUSR2		31
-
-/* Most things should be clean enough to redefine this at will, if care
- * is taken to make libc match.
- */
-
-#define __OLD_NSIG	32
-#define __NEW_NSIG	64
-#define _NSIG_BPW	32
-#define _NSIG_WORDS	(__NEW_NSIG / _NSIG_BPW)
-
-#define SIGRTMIN	32
-#define SIGRTMAX	__NEW_NSIG
-
-#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
-#define	_NSIG		__NEW_NSIG
-#define __new_sigset_t	sigset_t
-#define __new_sigaction	sigaction
-#define __old_sigset_t	old_sigset_t
-#define __old_sigaction	old_sigaction
-#else
-#define _NSIG		__OLD_NSIG
-#define __old_sigset_t	sigset_t
-#define __old_sigaction	sigaction
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long __old_sigset_t;
-
-typedef struct {
-	unsigned long	sig[_NSIG_WORDS];
-} __new_sigset_t;
-
-
-#ifdef __KERNEL__
-/* A SunOS sigstack */
-struct sigstack {
-	char *the_stack;
-	int   cur_status;
-};
-#endif
-
-/* Sigvec flags */
-#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
-#define _SV_INTR      2u    /* Sig return should not restart system call */
-#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
-#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
-
-/*
- * sa_flags values: SA_STACK is not currently supported, but will allow the
- * usage of signal stacks by using the (now obsolete) sa_restorer field in
- * the sigaction structure as a stack pointer. This is now possible due to
- * the changes in signal handling. LBT 010493.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- */
-#define SA_NOCLDSTOP	_SV_IGNCHILD
-#define SA_STACK	_SV_SSTACK
-#define SA_ONSTACK	_SV_SSTACK
-#define SA_RESTART	_SV_INTR
-#define SA_ONESHOT	_SV_RESET
-#define SA_NOMASK	0x20u
-#define SA_NOCLDWAIT	0x100u
-#define SA_SIGINFO	0x200u
-
-#define SIG_BLOCK          0x01	/* for blocking signals */
-#define SIG_UNBLOCK        0x02	/* for unblocking signals */
-#define SIG_SETMASK        0x04	/* for setting the signal mask */
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	4096
-#define SIGSTKSZ	16384
-
-#ifdef __KERNEL__
-/*
- * DJHR
- * SA_STATIC_ALLOC is used for the SPARC system to indicate that this
- * interrupt handler's irq structure should be statically allocated
- * by the request_irq routine.
- * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
- * of interrupt usage and that sucks. Also without a flag like this
- * it may be possible for the free_irq routine to attempt to free
- * statically allocated data.. which is NOT GOOD.
- *
- */
-#define SA_STATIC_ALLOC		0x8000
-#endif
-
-#include <asm-generic/signal.h>
-
-#ifdef __KERNEL__
-struct __new_sigaction {
-	__sighandler_t	sa_handler;
-	unsigned long	sa_flags;
-	void		(*sa_restorer)(void);	/* Not used by Linux/SPARC */
-	__new_sigset_t	sa_mask;
-};
-
-struct k_sigaction {
-	struct __new_sigaction	sa;
-	void			__user *ka_restorer;
-};
-
-struct __old_sigaction {
-	__sighandler_t	sa_handler;
-	__old_sigset_t	sa_mask;
-	unsigned long	sa_flags;
-	void		(*sa_restorer) (void);	/* not used by Linux/SPARC */
-};
-
-typedef struct sigaltstack {
-	void		__user *ss_sp;
-	int		ss_flags;
-	size_t		ss_size;
-} stack_t;
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* !(__KERNEL__) */
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_ASMSPARC_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/signal_64.h b/arch/sparc/include/asm/signal_64.h
deleted file mode 100644
index 41535e7..0000000
--- a/arch/sparc/include/asm/signal_64.h
+++ /dev/null
@@ -1,210 +0,0 @@ 
-#ifndef __SPARC_SIGNAL_H
-#define __SPARC_SIGNAL_H
-
-#include <asm/sigcontext.h>
-#include <linux/compiler.h>
-
-#ifdef __KERNEL__
-#ifndef __ASSEMBLY__
-#include <linux/personality.h>
-#include <linux/types.h>
-#endif
-#endif
-
-/* On the Sparc the signal handlers get passed a 'sub-signal' code
- * for certain signal types, which we document here.
- */
-#define SIGHUP		 1
-#define SIGINT		 2
-#define SIGQUIT		 3
-#define SIGILL		 4
-#define    SUBSIG_STACK       0
-#define    SUBSIG_ILLINST     2
-#define    SUBSIG_PRIVINST    3
-#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
-
-#define SIGTRAP		 5
-#define SIGABRT		 6
-#define SIGIOT		 6
-
-#define SIGEMT           7
-#define    SUBSIG_TAG    10
-
-#define SIGFPE		 8
-#define    SUBSIG_FPDISABLED     0x400
-#define    SUBSIG_FPERROR        0x404
-#define    SUBSIG_FPINTOVFL      0x001
-#define    SUBSIG_FPSTSIG        0x002
-#define    SUBSIG_IDIVZERO       0x014
-#define    SUBSIG_FPINEXACT      0x0c4
-#define    SUBSIG_FPDIVZERO      0x0c8
-#define    SUBSIG_FPUNFLOW       0x0cc
-#define    SUBSIG_FPOPERROR      0x0d0
-#define    SUBSIG_FPOVFLOW       0x0d4
-
-#define SIGKILL		 9
-#define SIGBUS          10
-#define    SUBSIG_BUSTIMEOUT    1
-#define    SUBSIG_ALIGNMENT     2
-#define    SUBSIG_MISCERROR     5
-
-#define SIGSEGV		11
-#define    SUBSIG_NOMAPPING     3
-#define    SUBSIG_PROTECTION    4
-#define    SUBSIG_SEGERROR      5
-
-#define SIGSYS		12
-
-#define SIGPIPE		13
-#define SIGALRM		14
-#define SIGTERM		15
-#define SIGURG          16
-
-/* SunOS values which deviate from the Linux/i386 ones */
-#define SIGSTOP		17
-#define SIGTSTP		18
-#define SIGCONT		19
-#define SIGCHLD		20
-#define SIGTTIN		21
-#define SIGTTOU		22
-#define SIGIO		23
-#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
-#define SIGXCPU		24
-#define SIGXFSZ		25
-#define SIGVTALRM	26
-#define SIGPROF		27
-#define SIGWINCH	28
-#define SIGLOST		29
-#define SIGPWR		SIGLOST
-#define SIGUSR1		30
-#define SIGUSR2		31
-
-/* Most things should be clean enough to redefine this at will, if care
-   is taken to make libc match.  */
-
-#define __OLD_NSIG	32
-#define __NEW_NSIG      64
-#define _NSIG_BPW       64
-#define _NSIG_WORDS     (__NEW_NSIG / _NSIG_BPW)
-
-#define SIGRTMIN       32
-#define SIGRTMAX       __NEW_NSIG
-
-#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
-#define _NSIG			__NEW_NSIG
-#define __new_sigset_t		sigset_t
-#define __new_sigaction		sigaction
-#define __new_sigaction32	sigaction32
-#define __old_sigset_t		old_sigset_t
-#define __old_sigaction		old_sigaction
-#define __old_sigaction32	old_sigaction32
-#else
-#define _NSIG			__OLD_NSIG
-#define NSIG			_NSIG
-#define __old_sigset_t		sigset_t
-#define __old_sigaction		sigaction
-#define __old_sigaction32	sigaction32
-#endif
-
-#ifndef __ASSEMBLY__
-
-typedef unsigned long __old_sigset_t;            /* at least 32 bits */
-
-typedef struct {
-       unsigned long sig[_NSIG_WORDS];
-} __new_sigset_t;
-
-/* A SunOS sigstack */
-struct sigstack {
-	/* XXX 32-bit pointers pinhead XXX */
-	char *the_stack;
-	int   cur_status;
-};
-
-/* Sigvec flags */
-#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
-#define _SV_INTR      2u    /* Sig return should not restart system call */
-#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
-#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
-
-/*
- * sa_flags values: SA_STACK is not currently supported, but will allow the
- * usage of signal stacks by using the (now obsolete) sa_restorer field in
- * the sigaction structure as a stack pointer. This is now possible due to
- * the changes in signal handling. LBT 010493.
- * SA_RESTART flag to get restarting signals (which were the default long ago)
- */
-#define SA_NOCLDSTOP	_SV_IGNCHILD
-#define SA_STACK	_SV_SSTACK
-#define SA_ONSTACK	_SV_SSTACK
-#define SA_RESTART	_SV_INTR
-#define SA_ONESHOT	_SV_RESET
-#define SA_NOMASK	0x20u
-#define SA_NOCLDWAIT    0x100u
-#define SA_SIGINFO      0x200u
-
-
-#define SIG_BLOCK          0x01	/* for blocking signals */
-#define SIG_UNBLOCK        0x02	/* for unblocking signals */
-#define SIG_SETMASK        0x04	/* for setting the signal mask */
-
-/*
- * sigaltstack controls
- */
-#define SS_ONSTACK	1
-#define SS_DISABLE	2
-
-#define MINSIGSTKSZ	4096
-#define SIGSTKSZ	16384
-
-#ifdef __KERNEL__
-/*
- * DJHR
- * SA_STATIC_ALLOC is used for the sparc32 system to indicate that this
- * interrupt handler's irq structure should be statically allocated
- * by the request_irq routine.
- * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
- * of interrupt usage and that sucks. Also without a flag like this
- * it may be possible for the free_irq routine to attempt to free
- * statically allocated data.. which is NOT GOOD.
- *
- */
-#define SA_STATIC_ALLOC         0x8000
-#endif
-
-#include <asm-generic/signal.h>
-
-struct __new_sigaction {
-	__sighandler_t		sa_handler;
-	unsigned long		sa_flags;
-	__sigrestore_t		sa_restorer;  /* not used by Linux/SPARC yet */
-	__new_sigset_t		sa_mask;
-};
-
-struct __old_sigaction {
-	__sighandler_t		sa_handler;
-	__old_sigset_t		sa_mask;
-	unsigned long		sa_flags;
-	void			(*sa_restorer)(void);  /* not used by Linux/SPARC yet */
-};
-
-typedef struct sigaltstack {
-	void			__user *ss_sp;
-	int			ss_flags;
-	size_t			ss_size;
-} stack_t;
-
-#ifdef __KERNEL__
-
-struct k_sigaction {
-	struct			__new_sigaction sa;
-	void			__user *ka_restorer;
-};
-
-#define ptrace_signal_deliver(regs, cookie) do { } while (0)
-
-#endif /* !(__KERNEL__) */
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(__SPARC_SIGNAL_H) */