Patchwork [U-Boot] Please pull u-boot-ti/master

login
register
mail settings
Submitter Tom Rini
Date May 14, 2012, 9:26 p.m.
Message ID <20120514212653.GG10008@bill-the-cat>
Download mbox
Permalink /patch/159196/
State Accepted
Delegated to: Albert ARIBAUD
Headers show

Pull-request

git://git.denx.de/u-boot-ti.git master

Comments

Tom Rini - May 14, 2012, 9:26 p.m.
Hello,

This replaces my previous pull request and has been build-tested on both
ELDK5.2 and 4.1 and the only failures are the expected ones of
ELDK4.1+omap4/5 (too old to generate working thumb in this case).

omap3_beagle and omap4_panda are boot tested (with 3.4-rc7+b6255ee) to a
login prompt and am335x_evm (on beaglebone) is also tested, but not
booted to Linux.

The following changes since commit 026251a5e825d61d3bcdf6dffcc27d15afd574f4:

  EXYNOS: Change bits per pixel value proper for u-boot. (2012-04-25 16:23:26 +0900)

are available in the git repository at:

  git://git.denx.de/u-boot-ti.git master

for you to fetch changes up to 2e3175ff61dc6f76d2c92c1a207053f03964c4b1:

  OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer (2012-05-14 09:22:07 -0700)

----------------------------------------------------------------
Enric Balletbo i Serra (2):
      igep00x0: enable the use of a plain text file
      igep00x0: change mpurate from 500 to auto

Jon Hunter (1):
      OMAP4: Set fdt_high for OMAP4 devices to enable booting with Device Tree

Matt Porter (1):
      arm, omap3: fix warm reset serial output on OMAP36xx/AM/DM37xx

SRICHARAN R (1):
      OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer

Tero Kristo (3):
      omap4: panda: disable uart2 pads during boot
      omap4: do not enable fs-usb module
      omap4: do not enable auxiliary cores

Tom Rini (2):
      ARM: omap3: Set SPL stack size to 8KB, image to 54KB.
      ARM: omap3: Add CONFIG_SPL_BOARD_INIT for CONFIG_SPL_MMC_SUPPORT

 MAINTAINERS                        |   12 ++++++------
 arch/arm/cpu/armv7/omap3/clock.c   |   16 ++++++++++++++++
 arch/arm/cpu/armv7/omap4/clocks.c  |    6 ------
 board/ti/panda/panda_mux_data.h    |    8 ++++----
 doc/SPL/README.omap3               |    4 ++--
 include/configs/am3517_crane.h     |    2 +-
 include/configs/am3517_evm.h       |    2 +-
 include/configs/devkit8000.h       |    2 +-
 include/configs/igep00x0.h         |   30 +++++++++++++++++-------------
 include/configs/mcx.h              |    2 +-
 include/configs/omap3_beagle.h     |    3 ++-
 include/configs/omap3_evm_common.h |    3 ++-
 include/configs/omap3_overo.h      |    3 ++-
 include/configs/omap4_common.h     |    1 +
 include/configs/tam3517-common.h   |    2 +-
 include/configs/tricorder.h        |    3 ++-
 16 files changed, 59 insertions(+), 40 deletions(-)
Albert ARIBAUD - May 15, 2012, 6:29 a.m.
Hi Tom,

Le 14/05/2012 23:26, Tom Rini a écrit :
> Hello,
>
> This replaces my previous pull request and has been build-tested on both
> ELDK5.2 and 4.1 and the only failures are the expected ones of
> ELDK4.1+omap4/5 (too old to generate working thumb in this case).
>
> omap3_beagle and omap4_panda are boot tested (with 3.4-rc7+b6255ee) to a
> login prompt and am335x_evm (on beaglebone) is also tested, but not
> booted to Linux.
>
> The following changes since commit 026251a5e825d61d3bcdf6dffcc27d15afd574f4:
>
>    EXYNOS: Change bits per pixel value proper for u-boot. (2012-04-25 16:23:26 +0900)
>
> are available in the git repository at:
>
>    git://git.denx.de/u-boot-ti.git master
>
> for you to fetch changes up to 2e3175ff61dc6f76d2c92c1a207053f03964c4b1:
>
>    OMAP4/5: Change omap4_sdp, omap4_panda, omap5_evm maintainer (2012-05-14 09:22:07 -0700)

Applied to u-boot-arm/master, thanks.

Amicalement,