Patchwork [U-Boot] mx28evk: Fix PSWITCH key position

login
register
mail settings
Submitter Fabio Estevam
Date May 12, 2012, 6:16 p.m.
Message ID <1336846606-27596-1-git-send-email-festevam@gmail.com>
Download mbox | patch
Permalink /patch/158765/
State Accepted
Commit eeacb73b8e0823b400eda5022e56e9f5a59b37a0
Delegated to: Stefano Babic
Headers show

Comments

Fabio Estevam - May 12, 2012, 6:16 p.m.
Fix the position for PSWITCH key.

The good benefit of doing this is that boot time is greatly reduced: 
from 5 seconds to less then 1 second.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 doc/README.mx28evk |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
Marek Vasut - May 12, 2012, 6:20 p.m.
Dear Fabio Estevam,

> Fix the position for PSWITCH key.
> 
> The good benefit of doing this is that boot time is greatly reduced:
> from 5 seconds to less then 1 second.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  doc/README.mx28evk |    2 +-
>  1 files changed, 1 insertions(+), 1 deletions(-)
> 
> diff --git a/doc/README.mx28evk b/doc/README.mx28evk
> index c6c3d37..571dfda 100644
> --- a/doc/README.mx28evk
> +++ b/doc/README.mx28evk
> @@ -17,7 +17,7 @@ Jumper configuration
>  To boot MX28EVK from an SD card, set the boot mode DIP switches as:
> 
>     * Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42)
> -   * JTAG PSWITCH RESET: To the left (reset enabled)
> +   * JTAG PSWITCH RESET: To the right (reset disabled)
>     * Battery Source: Down
>     * Wall 5V: Up
>     * VDD 5V: To the left (off)

Thanks

Acked-by: Marek Vasut <marex@denx.de>

Best regards,
Marek Vasut

Patch

diff --git a/doc/README.mx28evk b/doc/README.mx28evk
index c6c3d37..571dfda 100644
--- a/doc/README.mx28evk
+++ b/doc/README.mx28evk
@@ -17,7 +17,7 @@  Jumper configuration
 To boot MX28EVK from an SD card, set the boot mode DIP switches as:
 
    * Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42)
-   * JTAG PSWITCH RESET: To the left (reset enabled)
+   * JTAG PSWITCH RESET: To the right (reset disabled)
    * Battery Source: Down
    * Wall 5V: Up
    * VDD 5V: To the left (off)