Patchwork [GIT,PULL] ARM: OMAP2+: Misc cleanup

Tony,

Please pull the following preparatory cleanup series to add OMAP5 minimal
support. Boot tested on OMAP2430 SDP, OMAP3430 SDP and OMAP4430 SDP platforms.

I have dropped {[PATCH 7/7] ARM: OMAP4+: Add prm and cm base init function}
from this set since Paul is taking that one in his queue.

P.S: While merging this series with linux-omap master, I saw one trivial
Makefile conflict.

The following changes since commit 69964ea4c7b68c9399f7977aa5b9aa6539a6a98a:

  Linux 3.4-rc5 (2012-04-29 15:19:10 -0700)

are available in the git repository at:
  git://gitorious.org/omap-sw-develoment/linux-omap-dev.git for_3.5/omap_misc_cleanup

R Sricharan (1):
      ARM: OMAP2+: dma: Define dma capabilities register bitfields and use them.

Santosh Shilimkar (6):
      ARM: OMAP4: Don't compile cm2xxx_3xxx.c for OMAP4 only builds.
      ARM: OMAP2+: Clean up wrapping multiple objects in Makefile
      ARM: OMAP4: Remove un-used WakeupGen register defines.
      ARM: OMAP: dma: Make use of cpu_class_is_omap2() to avoid future patching.
      ARM: All OMAP2PLUS machines use omap2 directory so just add one entry
      ARM: OMAP4: Reduce the static IO mapping

 arch/arm/Makefile                                 |    4 +-
 arch/arm/mach-omap2/Makefile                      |  163 ++++++++++-----------
 arch/arm/mach-omap2/dma.c                         |   11 +-
 arch/arm/mach-omap2/include/mach/omap-wakeupgen.h |    8 -
 arch/arm/mach-omap2/io.c                          |   30 ----
 arch/arm/mach-omap2/iomap.h                       |   28 ----
 arch/arm/plat-omap/dma.c                          |    4 +-
 arch/arm/plat-omap/include/plat/dma.h             |    5 +
 8 files changed, 93 insertions(+), 160 deletions(-)

Regards
Santosh

* Santosh Shilimkar <santosh.shilimkar@ti.com> [120508 00:18]:
> Tony,
> 
> Please pull the following preparatory cleanup series to add OMAP5 minimal
> support. Boot tested on OMAP2430 SDP, OMAP3430 SDP and OMAP4430 SDP platforms.
> 
> I have dropped {[PATCH 7/7] ARM: OMAP4+: Add prm and cm base init function}
> from this set since Paul is taking that one in his queue.

OK thanks, pulling this into cleanup-soc and merging into cleanup branch
with what we have in devel-hwmod.
 
> P.S: While merging this series with linux-omap master, I saw one trivial
> Makefile conflict.

Yes that's with devel-hwmod, I'm basing cleanup branch on that so we have
all the dependencies out of the way for adding omap5 and am33xx patches
on top of the cleanup branch.

Regards,

Tony

* Hiremath, Vaibhav <hvaibhav@ti.com> [120510 01:37]:
> On Wed, May 09, 2012 at 00:04:14, Tony Lindgren wrote:
> > * Santosh Shilimkar <santosh.shilimkar@ti.com> [120508 00:18]:
> > > Tony,
> > > 
> > > Please pull the following preparatory cleanup series to add OMAP5 minimal
> > > support. Boot tested on OMAP2430 SDP, OMAP3430 SDP and OMAP4430 SDP platforms.
> > > 
> > > I have dropped {[PATCH 7/7] ARM: OMAP4+: Add prm and cm base init function}
> > > from this set since Paul is taking that one in his queue.
> > 
> > OK thanks, pulling this into cleanup-soc and merging into cleanup branch
> > with what we have in devel-hwmod.
> >  
> Tony,
> 
> 
> Just observed that, while merging cleanup-soc into cleanup branch you have 
> missed couple of lines from Satosh's original patch. Which leads to build 
> break on OMAP2 alone build.

OK thanks for letting me know, will take a look.

Tony
 
> Can you please merge below change,
> 
> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
> index 833f153..c82783a 100644
> --- a/arch/arm/mach-omap2/Makefile
> +++ b/arch/arm/mach-omap2/Makefile
> @@ -122,6 +122,8 @@ obj-$(CONFIG_SOC_AM33XX)            += $(powerdomain-common)
>  clockdomain-common                     += clockdomain.o
>  clockdomain-common                     += clockdomains_common_data.o
>  obj-$(CONFIG_ARCH_OMAP2)               += $(clockdomain-common)
> +obj-$(CONFIG_ARCH_OMAP2)               += clockdomain2xxx_3xxx.o
> +obj-$(CONFIG_ARCH_OMAP2)               += clockdomains2xxx_3xxx_data.o
>  obj-$(CONFIG_SOC_OMAP2420)             += clockdomains2420_data.o
>  obj-$(CONFIG_SOC_OMAP2430)             += clockdomains2430_data.o
>  obj-$(CONFIG_ARCH_OMAP3)               += $(clockdomain-common)
> 
> 
> Thanks,
> Vaibhav