diff mbox

[07/10] atl1c: remove PHY reset/init for link down event

Message ID 1335421638-16304-8-git-send-email-xiong@qca.qualcomm.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Huang, Xiong April 26, 2012, 6:27 a.m. UTC 
it's unnecessary to reset/init phy when link down.
Only L1/L2 chip (supported by atlx) need such action.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
---
 drivers/net/ethernet/atheros/atl1c/atl1c_main.c |    2 --
 1 files changed, 0 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
index 995da22..cb3b3c4 100644
--- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
+++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c
@@ -270,8 +270,6 @@  static void atl1c_check_link_status(struct atl1c_adapter *adapter)
 		atl1c_set_aspm(hw, SPEED_0);
 		netif_carrier_off(netdev);
 		netif_stop_queue(netdev);
-		atl1c_phy_reset(hw);
-		atl1c_phy_init(&adapter->hw);
 	} else {
 		/* Link Up */
 		hw->hibernate = false;